Graco 312066Z Reactor Electric Proportioners Users Manual 312066Z, Reactor, Proportioners, Repair Parts, (English)

2015-04-02

• Models
• Supplied Manuals
• Related Manuals
• Warnings
• Temperature Control Diagnostic Codes
  • E01: High fluid temperature
  • E02: High zone current
  • E03: No zone current
  • E04: Fluid Temperature Sensor (FTS) or thermocouple disconnected
  • E05: Circuit board overheated
  • E06: Communication cable unplugged
• Motor Control Diagnostic Codes
  • Alarms
  • Warnings
  • E21: No component A transducer
  • E22: No component B transducer
  • E23: High fluid pressure
  • E24: Pressure Imbalance
  • E25: High line voltage
  • E26: Low line voltage
  • E27: High Motor Temperature
  • E28: High current in motor
  • E29: Brush Wear
  • E31: Motor Control Failure (E-30 and E-XP2 only)
  • E32: Motor Control Overtemperature
• Communication Diagnostic Codes
  • E30: Momentary loss of communication
  • E99: Loss of communication
• Troubleshooting
  • Reactor Electronics
  • Primary Heaters (A and B)
  • Hose Heat System
• Repair
  • Before Beginning Repair
  • Pressure Relief Procedure
  • Flushing
  • Pump Removal
  • Pump Installation
  • Drive Housing
  • Motor Brushes
  • Capacitor Test
  • Circuit Breaker Module
  • Electric Motor
  • Motor Control Board
  • Transducers
  • Electric Fan
  • Temperature Control Module
  • Primary Heaters
  • Heated Hose
  • Fluid Temperature Sensor (FTS)
  • Display Module
  • Inlet Fluid Strainer Screen
  • Pump Lubrication System
• Parts
  • Reactor Assembly (Model E-XP1 Shown)
  • Parts Used on All Models
  • Parts that Vary by Model
  • Sub Assemblies
  • Proportioner Module
  • Fluid Heaters
  • 7.65 kW Single Zone Fluid Heater
  • Reactor Frame
  • Display
  • Temperature Control
  • Motor Control
  • Fluid Manifold
  • Circuit Breaker Modules
• 248669 Conversion Kit
• Dimensions
• Technical Data
• Graco Standard Warranty
• Graco Information