Grand Mate TX143 Remote controller User Manual
Grand Mate Co., Ltd Remote controller
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4198859 |
| Application ID | MqygnTq5m2qHJxS9wwc9mQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 137.08kB (1713453 bits) |
| Date Submitted | 2019-03-12 00:00:00 |
| Date Available | 2019-03-12 00:00:00 |
| Creation Date | 2019-03-13 10:51:22 |
| Producing Software | Microsoft® Publisher 2013 |
| Document Lastmod | 2019-03-13 10:51:22 |
| Document Title | User Manual |
| Document Creator | Microsoft® Publisher 2013 |
| Document Author: | Willance |
TX121 Remote Electronic Ignition and Control System OPERATING INSTRUCTIONS -FOR OEM USE ONLY TX121 ⚠WARNING Fire or explosion hazard. Attempted disassembly or repair of controls can cause property damage, severe injury or death. Do not disassemble the gas valve; it contains no serviceable components. Read these instructions carefully. Failure to follow them could result in a fire or explosion causing property damage, personal injury, or loss of life. The product must be installed and operated according to all local regulations. A. ● ● Do not light any appliance. Do not touch any electrical switch; do not use any phone in your building. ● ● If you cannot reach the gas supplier, call the fire department. B. Use only your hand to push in or turn the gas control knobs. Never use tools. If a knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion. C. Do not use this control or any gas appliance if any part has been under water or in contact with water. Immediately call a qualified service technician to replace the control system and any gas control system which has been under water or in contact with water. D. These instructions are to be referenced as a user guide, and do not supersede appliance manufacturer’s lighting instructions. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. NOTE: This device complies with CAN ICES-3 (B)/NMB-3(B) ◆ This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit repond aux specifications techniques applicables a l'innovation, Science et Developpement economique Canada. ◆ Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. APPLICATION TX121 is a battery-powered electronic remote ignition and control system for gas appliances with pilot burners and ODS systems. Batteries - Remote Handset: GENERAL NOTES Radio frequency Remote NOTE: These remote handsets, receiver, wall switches, are not interchangeable with previous versions. 315 MHz for US, Canada; For all lighting/ignition instructions please refer to appliance manufacturer’s instructions. 3 x1.5V “AAA” (quality alkaline recommended) 4.5V 1/3 100mA TX121—Operating Instructions D02 TX143 SERIES REMOTE HANDSET FEATURES TX142 TX121 Remote 315MHz TX143 TX121 TX142 TX143 ON/ OFF ★ ★ ★ Childproof ★ ★ ★ Revo Home Compatible ★ ★ ★ Flame Height Adjustment ★ ★ Standing Pilot* ★ Controller Model Unidirectional LCD Low Battery Indicator Second Burner Thermostat Timer Error Code Notification* ★ Fan Speed Light Dimmer AUX ON/ OFF Fan Delay ON/ OFF Clock Daily Program Thermostat 3 Independent Access Keys *Disabled for Europe 2/3 TX121—Operating Instructions D02 CHILDPROOF There’s a slide switch can select lock or unlock. Lock: The handset is rendered inoperable include the off function. Dexen Industries, Inc 9220 Norwalk Blvd Santa Fe Springs, CA 90670 Tel: +1 5626998490 Wiring of valve and receiver must be completed before starting ignition. Failure to do so could damage the electronics. ⚠WARNING When pilot ignition is confirmed, main flame valve turn on to maximum flame height. TURN ON THE FIRE Press button, the Main burner and rear burner turn on once pilot ignition is confirmed. ● Main gas goes Max flame height first, and will goes last flame height memory. ● TURN OFF THE FIRE Press button, NOTE: There is a 3 second delay before the next ignition is possible. MISCELLANEOUS Battery replacement Battery replacement is recommended at the beginning of each heating season. Do not use metal tools to remove batteries. Using a metal tool could cause a short that may damage the receiver. 3/3 TX142 Remote Electronic Ignition and Control System OPERATING INSTRUCTIONS -FOR OEM USE ONLY NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. TX142 ⚠ WARNING Fire or explosion hazard. Attempted disassembly or repair of controls can cause property damage, severe injury or death. Do not disassemble the gas valve; it contains no serviceable components. Read these instructions carefully. Failure to follow them could result in a fire or explosion causing property damage, personal injury, or loss of life. The product must be installed and operated according to all local regulations. A. ● ● This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Do not light any appliance. Do not touch any electrical switch; do not use any phone in your building. NOTE: This device complies with CAN ICES-3 (B)/NMB-3(B) ◆ This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit repond aux specifications techniques applicables a l'innovation, Science et Developpement economique Canada. ◆ Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. ● ● If you cannot reach the gas supplier, call the fire department. B. Use only your hand to push in or turn the gas control knobs. Never use tools. If a knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion. C. Do not use this control or any gas appliance if any part has been under water or in contact with water. Immediately call a qualified service technician to replace the control system and any gas control system which has been under water or in contact with water. D. These instructions are to be referenced as a user guide, and do not supersede appliance manufacturer’s lighting instructions. APPLICATION TX142 is a battery-powered electronic remote ignition and control system for gas appliances with pilot burners and ODS systems. Batteries - Remote Handset: GENERAL NOTES Radio frequency Remote NOTE: These remote handsets, receiver, wall switches, are not interchangeable with previous versions. 315 MHz for US, Canada; For all lighting/ignition instructions please refer to appliance manufacturer’s instructions. 3 x1.5V “AAA” (quality alkaline recommended) 4.5V 1/4 100mA TX142—Operating Instructions D03 TX143 SERIES REMOTE HANDSET FEATURES TX142 TX121 Remote 315MHz TX143 TX121 TX142 TX143 ON/ OFF ★ ★ ★ Childproof ★ ★ ★ Revo Home Compatible ★ ★ ★ Flame Height Adjustment ★ ★ Standing Pilot* ★ Controller Model Unidirectional LCD Low Battery Indicator Second Burner Thermostat Timer Error Code Notification* ★ Fan Speed Light Dimmer AUX ON/ OFF Fan Delay ON/ OFF Clock Daily Program Thermostat 3 Independent Access Keys *Disabled for Europe 2/3 TX142—Operating Instructions D03 CHILDPROOF FLAME HEIGHT ADJUSTMENT There’s a slide switch can select lock or unlock. Handset Lock: The handset is rendered inoperable include the off function. pressing the button changes the flame height in the following order: During the appliance flame on, briefly Flame height 3 and back to 3. TURN OFF THE FIRE Press Wiring of valve and receiver must be completed before starting ignition. Failure to do so could damage the electronics. button, NOTE: There is a 3 second delay before the next ignition is possible. ⚠ WARNING When pilot ignition is confirmed, main flame valve turn on to maximum flame height. PILOT FLAME Handset Press button to activate appliance to pilot flame. FAN SPEED ADJUSTMENT Handset During the appliance flame on, briefly pressing the button changes the fan speed of thermostat in the following order: Press button to deactivate appliance to pilot flame. Fan speed 3 to Fan speed 3 and back TURN ON THE FIRE Press button, the Main burner and rear burner turn on once pilot ignition is confirmed. ● Main gas goes Max flame height first, and will goes last flame height memory. ● MISCELLANEOUS Battery replacement Battery replacement is recommended at the beginning of each heating season. Do not use metal tools to remove batteries. Using a metal tool could cause a short that may damage the receiver. Dexen Industries, Inc 9220 Norwalk Blvd Santa Fe Springs, CA 90670 Tel: +1 5626998490 3/3 TX143 Remote Electronic Ignition and Control System OPERATING INSTRUCTIONS -FOR OEM USE ONLY TX143 ⚠WARNING Fire or explosion hazard. Attempted disassembly or repair of controls can cause property damage, severe injury or death. Do not disassemble the gas valve; it contains no serviceable components. Read these instructions carefully. Failure to follow them could result in a fire or explosion causing property damage, personal injury, or loss of life. The product must be installed and operated according to all local regulations. A. ● ● NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Do not light any appliance. Do not touch any electrical switch; do not use any phone in your building. NOTE: This device complies with CAN ICES-3 (B)/NMB-3(B) ◆ This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Ce produit repond aux specifications techniques applicables a l'innovation, Science et Developpement economique Canada. ◆ Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes : 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. ● ● If you cannot reach the gas supplier, call the fire department. B. Use only your hand to push in or turn the gas control knobs. Never use tools. If a knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician. Force or attempted repair may result in a fire or explosion. C. Do not use this control or any gas appliance if any part has been under water or in contact with water. Immediately call a qualified service technician to replace the control system and any gas control system which has been under water or in contact with water. D. These instructions are to be referenced as a user guide, and do not supersede appliance manufacturer’s lighting instructions. APPLICATION TX143 is a battery-powered electronic remote ignition and control system for gas appliances with pilot burners and ODS systems. Batteries - Remote Handset: GENERAL NOTES Radio frequency Remote NOTE: These remote handsets, receiver, wall switches, are not interchangeable with previous versions. 315 MHz for US, Canada; For all lighting/ignition instructions please refer to appliance manufacturer’s instructions. 3 x1.5V “AAA” (quality alkaline recommended) 4.5V 1/3 100mA TX143—Operating Instructions D03 TX143 SERIES REMOTE HANDSET FEATURES TX142 TX121 Remote 315MHz TX143 TX121 TX142 TX143 ON/ OFF ★ ★ ★ Childproof ★ ★ ★ Revo Home Compatible ★ ★ ★ Flame Height Adjustment ★ ★ Standing Pilot* ★ Controller Model Unidirectional LCD Low Battery Indicator Second Burner Thermostat Timer Error Code Notification* ★ Fan Speed Light Dimmer AUX ON/ OFF Fan Delay ON/ OFF Clock Daily Program Thermostat 3 Independent Access Keys *Disabled for Europe 2/3 TX143—Operating Instructions D03 TURN OFF THE FIRE CHILDPROOF There’s a slide switch can select lock or unlock. Press Lock: The handset is rendered inoperable include the off function. button, NOTE: There is a 3 second delay before the next ignition is possible. MISCELLANEOUS Battery replacement Wiring of valve and receiver must be completed before starting ignition. Failure to do so could damage the electronics. Battery replacement is recommended at the beginning of each heating season. Do not use metal tools to remove batteries. Using a metal tool could cause a short that may damage the receiver. ⚠WARNING When pilot ignition is confirmed, main flame valve turn on to maximum flame height. Dexen Industries, Inc 9220 Norwalk Blvd Santa Fe Springs, CA 90670 TURN ON THE FIRE Press button, the Tel: +1 5626998490 Main burner and rear burner turn on once pilot ignition is confirmed. ● Main gas goes Max flame height first, and will goes last flame height memory. ● FLAME HEIGHT ADJUSTMENT Handset During the appliance flame on, briefly pressing the or button changes the flame height. 3/3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Willance Create Date : 2019:03:13 10:51:22+08:00 Modify Date : 2019:03:13 10:51:22+08:00 Title : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2019:03:13 10:51:22+08:00 Creator Tool : Microsoft® Publisher 2013 Format : application/pdf Creator : Willance Document ID : uuid:8a447559-465f-49f2-ad01-b86fb628ef4f Instance ID : uuid:2988354e-167e-4720-901e-ce9151986971 Producer : Microsoft® Publisher 2013 Page Count : 9EXIF Metadata provided by EXIF.tools