Grandstream Networks GWN7600 Wireless Access Point User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3295128
Application ID	+XxrvwspuERGdt5SWsS62w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	144.37kB (1804617 bits)
Date Submitted	2017-02-24 00:00:00
Date Available	2017-02-24 00:00:00
Creation Date	2017-12-23 14:05:41
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-23 14:05:41
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Windows)

GWN7600
Wireless Access Point
To ensure easy installation and management, the GWN7600 uses a controller-less distributed network management design in
which the controller is embedded within the product’s web user interface. This allows each access point to manage
a network of up to 30 GWN76xx series APs independently without needing separate controller hardware/software
and without a single point-of-failure. This wireless access point can be paired with any third party routers as well as
Grandstream GWN series routers. With support for advanced QoS, low-latency real-time applications, 450+ concurrent
client devices per AP and dual Gigabit network ports with PoE, the GWN7600 is an ideal WiFi access point for medium
wireless network deployments with medium-to-high user density.
Support 802.3af
Power-over-Ethernet
(PoE)
1.17Gbps wireless
throughput and 2x
Gigabit wireline ports
Support 450+ concurrent
WiFi client devices
Advanced QoS to ensure
real-time performance
of low-latency applications
Anti-hacking secure boot and
critical data/control lockdown
via digital signatures, unique
security certiicate/random
default password per device
info@grandstream.com
Up to 165-meter
coverage range
Embedded controller allows
GWN7600 to auto-discover,
auto-provision and manage
up to 30 GWN7600s in a
network
www.grandstream.com
Speciications
WiFi Standards IEEE 802.11 a/b/g/n/ac (Wave-2)
Antennas
2x 2.4 GHz, gain 3 dBi, internal antenna
2x 5 GHz, gain 3 dBi, internal antenna
IEEE 802.11ac: 6.5 Mbps to 877 Mbps
IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
IEEE 802.11n: 6.5 Mbps to 300 Mbps
WiFi Data Rates IEEE 802.11b: 1, 2, 5.5, 11 Mbps
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
*Actual throughput may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment and mix of devices in the network
Frequency Bands
Channel Bandwidth
2.4GHz radio : 2.412 - 2.462 GHz
5GHz radio: 5.150 - 5.250 GHz, 5.725-5.850 GHz
2.4G: 20 and 40 MHz
5G: 20,40 and 80 MHz
WEP, WPA/WPA2-PSK, WPA/WPA2 Enterprise (TKIP/AES), anti-hacking secure boot and critical
WiFi and System Security data/control lockdown via digital signatures, unique security certiicate and random default
password per device
MIMO 2x2:2 2.4GHz (MIMO), 2x2:2 5GHz (MU-MIMO)
Coverage Range Up to 541 ft. (165 meters)
Maximum TX Power
5G: 802.11a:22.53dBm,802.11n-HT20:22.36dBm;802.11n-HT40:22.38dBm;802.11ac20:22.34dBm
802.11ac40:22.30dBm;802.11ac80:22.15dBm;
2.4G: 802.11b:20.14dBm;802.11g:22.40dBm,802.11n-HT20:22.14dBm;802.11n-HT40:22.0dBm;
802.11b:17.69dBm;802.11g:19.78dBm,802.11n-HT20:19.62dBm;802.11n-HT40:19.64dBm;
Receiver Sensitivity
2.4G
802.11b:-99dBm @1Mbps,-91dBm @11Mbps;802.11g:-93dBm @6Mbps,-75dBm @54Mbps;
80.11n 20MHz:-72dBm @MCS7;802.11n 40MHz:-69dBm @MCS7
5G
802.11a:-91dBm @6Mbps,-74dBm @54Mbps;802.11ac 20MHz:-67dBm @MCS8;802.11ac
HT40:-63dBm @MCS9;802.11ac 80MHz:-60dBm @MCS92
SSIDs 16 SSIDs per radio
Concurrent Clients
Network Interfaces
Auxiliary Ports
Mounting
450+
2x autosensing 10/100/1000 Base-T Ethernet Ports
1x USB 2.0 port, 1x Reset Pinhole, 1x Kensington lock
Indoor wall mount or ceiling mount, kits included
LEDs 3 tri-color LEDs for device tracking and status indication
Network Protocols
IPv4, 802.1Q, 802.1p, 802.1x, 802.11e/WMM
QoS 802.11e/WMM, VLAN, TOS
Network Management
Embedded controller in GWN7600 allows it to auto-discover, auto-provision and manage up to 30
GWN7600s in a network
DC Input: 24VDC/1A
Power and Green Energy Eiciency Power over Ethernet (802.3af) compliant
Maximum Power Consumption:13.8W
Environmental
Physical
Package Content
Compliance
www.grandstream.com
Operation:-20°C to 40°C
Storage: -10°C to 60°C
Humidity: 10% to 90% Non-condensing
Unit Dimension: 205.3 x 205.3 x 45.9mm; Unit Weight: 526g
Unit + Mounting Kits Dimension : 205.3 x 205.3 x 53.9mm; Unit + Mounting Kits Weight : 610g
Entire Package Dimension: 228.5 x 220 x 79mm; Entire Package Weight: 854g
GWN7600 Wave-2 802.11ac Wireless AP, Mounting Kits, Quick Start Guide
FCC, CE, RCM, ISEDC
EN
OVERVIEW
GWN7600 PORTS
To ensure easy installation and management, the GWN7600 uses a controller-less distributed network management design in which the controller is embedded within the product’s
web user interface. This allows each access point to manage a network of up to 30 GWN7600
series APs independently without needing separate controller hardware/software and without a single point-of-failure. This wireless access point can be paired with any third party
routers as well as Grandstream GWN series routers. With support for advanced QoS,
low-latency real-time applications, 450+ concurrent client devices per AP and
dual Gigabit network ports with PoE, the GWN7600 is an ideal WiFi access point
for medium wireless network deployments with medium-to-high user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -20°C to 40 °C.
• Do not expose the GWN7600 to environments outside of the following humidity range:
10-90% RH (non-condensing).
• Do not power cycle your GWN7600 during system boot up or irmware upgrade. You
may corrupt irmware images and cause the unit to malfunction.
PACKAGE CONTENTS
GWN7600 Access Point
1 x Quick Installation Guide
1 x GPL Statement
Mounting Bracket
Port
Description
POWER
Power adapter connector (DC24V, 1A)
Note: Power adapter is not provided.
NET/POE
Ethernet RJ45 port (10/100/1000Mbps) supporting
PoE.
NET
Ethernet RJ45 port (10/100/1000Mbps) to your
router or another GWN76xx.
Ceiling Mounting Bracket 3 x Plastic Expansion Bolt
USB 2.0 port (for future IOT & location based
applications)
RESET
3 x M3 NUT
3 x Screw (PM 3.0 x 50)
3 x Screw (PA 3.5 x 20 )
Factory reset button. Press for 7 seconds to reset
factory default settings.
HARDWARE INSTALLATION
GWN7600 can be mounted on the wall or ceiling, Please refer to the following steps for
the appropriate installation.
Wall Mount
1. Position the mounting bracket at the desired location on the wall with the arrow pointing
up.
2. Use a pencil to mark the four mounting holes (screw holes DIA 5.5mm, reticle hole DIA
25mm).
3. Insert screw anchors into the 5.5 mm holes. Attach the mounting bracket to the wall by
inserting the screws into the anchors.
4. Connect the power cable and the ethernet cable (RJ45) to the correct ports of your
GWN7600.
Ceiling Mount
1. Remove the ceiling tile.
2. Place the ceiling backing plate in the center of the ceiling tile and mark the mounting
screw holes (screw holes DIA 5.5mm, reticle hole DIA 25mm).
5. Align the arrow on the GWN7600 with the arrow on the locking tab of the mounting
bracket and ensure that your GWN7600 is frmly seated on the mounting bracket.
6.Turn the GWN clockwise until it locks into place and its the locking tab.
3. Insert the screws through the mounting bracket.
Ceiling Mounting Bracket
M3 nut
M3.0x50 screw
4. Connect the power cable and the Ethernet cable (RJ45) to the correct ports of your
GWN7600.
POWERING AND CONNECTING THE GWN7600
GWN7600 can be powered on using PoE switch using following steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of the GWN7600
Step 2: Plug the other end into the uplink port of the power over Ethernet (PoE) switch.
Network
Port
5. Align the arrow on the GWN7600 with the arrow on the locking tab of the mounting
bracket and ensure that your GWN7600
GWN is irmly
is irmly
seated
seated
on the
onmounting
the mounting
bracket
bracket
and connect
and connect
the network and power cables.
6.Turn the GWN clockwise until it locks into place and its the locking tab.
RJ45 Ethernet Cable
to Power over Ethernet
(PoE) Switch
Note: Ceiling mounting is recommended for optimal coverage performance.
CONNECT TO GWN7600 DEFAULT WIFI NETWORK
GWN7600 can be used as standalone access point out of box, or after factory reset with
Wi-Fi enabled by default.
After powering the GWN7600 and connecting it to the network, GWN7600 will broadcast
a default SSID based on its MAC address GWN[MAC’s last 6 digits] and a random
password.
Note: GWN7600’s default SSID and password information are printed on the MAC tag of
the unit.
Method 2: Discover GWN7600 using GWN DiscoveryTool.
1. Download and install GWN DiscoveryTool from the following link:
http://www.grandstream.com/support/tools
2. Open the GWN DiscoveryTool, and click on Scan.
3. The tool will discover all GWN7600 Access Points connected on the network showing
their MAC and IP addresses.
4. Click on Manage Device to be redirected directly to the GWN7600’s coniguration interface, or type in manually the displayed IP address on your browser.
ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7600’s SSID, or to the same network as the GWN7600
can discover and access its coniguration interface using one of the below methods:
Using one of the above methods, the login screen will appear. Type in “admin” in both
Username and Password ields and click on Sign In.
Method 1: Discover GWN7600 using its MAC Address.
1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the
device, or on the package.
2. From a computer connected to same network as the GWN7600, type in the following
address using the GWN7600’s MAC address on your browser https://gwn_.local
Example: if a GWN7600 has the MAC address 00:0B:82:8B:4E:28, this unit can be accessed by typing https://gwn_000b828b4e28.local on the browser.
Notes :
- Make sure that the GWN7600 is not already paired with another GWN7600/GWN7610
Access Point as slave, otherwise the coniguration interface cannot be accessed.
- If the GWN7600 is already paired, make sure to unpair it irst, or do a factory reset.
- For more information, please download the GWN7600 User Manual from:
http://www.grandstream.com/support
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:dd6e7575-a048-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:14 00:35:20Z
Create Date                     : 2017:07:14 00:35:20Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:dd6e7575-a048-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled

EXIF Metadata provided by EXIF.tools