Green Point Jabil Design Services Branch TGPBA0010290 ZigBee Interface Module User Manual Atmel Module Product Manual Update by BVADT v2

Download:
Mirror Download [FCC.gov]
Document ID	1427994
Application ID	2mOlVygwY3hayw+P0rIegg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.66kB (83192 bits)
Date Submitted	2011-03-08 00:00:00
Date Available	2011-03-08 00:00:00
Creation Date	2011-03-08 15:35:12
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2011-03-08 15:43:38
Document Title	Atmel Module Product Manual_Update by BVADT_v2
Document Creator	PDFCreator Version 0.9.2
Document Author:	JESSIE

Product Manual
JABIL Technology Services
Design Services
Low Power ZigBee Module
(Atmel)
TABLE OF AUTHORISATION
Name
Role
Organisation
Signature
Thomas Chang
PM
PMO
Thomas
Frank Liu
Desing Manager
R&D
Frank
DOCUMENT HISTORY
Date
5/11/10
Version
1.0
Status
Draft
Author
Yao-Ling
Cheng
Change
Initial Release
TABLE OF CONTENTS
INTRODUCTION..........................................................................................................................................3
1.1
1.2
1.3
1.4
PURPOSE ..............................................................................................................................................3
SCOPE ...................................................................................................................................................3
INTENDED AUDIENCE ............................................................................................................................3
DEFINITIONS AND ABBREVIATIONS ........................................................................................................3
OVERVIEW..................................................................................................................................................4
CONSTRAINTS, ASSUMPTIONS, AND DEPENDENCIES ..................................................................5
FEATURES...................................................................................................................................................6
BLOCK DIAGRAM AND PORT FUNCTION ..........................................................................................7
5.1
5.2
5.3
UART PORT .........................................................................................................................................7
PROGRAMMING AND DEBUG PORT .......................................................................................................7
GPIO PORT ..........................................................................................................................................7
DETAIL SPECIFICATIONS ......................................................................................................................8
6.1
PIN ASSIGNMENT ...................................................................................................................................8
6.1.1 LPZigBee Module ..........................................................................................................................8
6.2
THE PCB OUTLINE FOR LPZIGBEE MODULE ..........................................................................................9
6.3
ELECTRICAL SPECIFICATION ................................................................................................................10
6.3.1 DC power supply range ..............................................................................................................10
6.3.2 System dBm max & min (maximum and minimum TX output at PCB antenna) and
System current & power drawn................................................................................................................10
6.3.3 System current & power drawn of TX@20dBm and RX ........................................................10
6.3.4
System Current and Power consumption during idle and hibernate mode ....................................10
6.3.5
System RX Sensitivity (dBm)...........................................................................................................11
1
INTRODUCTION
1.1
PURPOSE
The purpose of this document is to provide the product manual and Design
Specifications for low power ZigBee (LPZigBee) module.
1.2
SCOPE
The scope of this document is to produce the detail design of LPZigBee module.
1.3
INTENDED AUDIENCE
This document is intended primarily for the EE Hardware Design.
1.4
DEFINITIONS AND ABBREVIATIONS
Term
Meaning
ADC
GPIO
I2C
JTAG
FEM
SPI
UART
NF
LPZigBee
Analog to Digital Converter
General Purpose Input/Output
Inter Integrated Circuit
Joint Test Action Group
Front-end module
Serial Peripheral Interface
Universal Asynchronous Receiver Transmitter
Noise figure
Low power Zigbee Module
2
OVERVIEW
LPZigBee module mainly consists of three sections: the microcontroller
ATXmega256D3 and periphery, the radio transceiver AT86RF231 and the RF frontend with power amplifier and low-pass filtering.
The ATXmega256D3 controls the AT86RF231 radio transceiver and serves as an
SPI master. The radio transceiver handles all actions concerning RF
modulation/demodulation, signal processing, frame reception and transmission. MAC
hardware acceleration functions are implemented in the radio transceiver, too.
Further information about the radio transceiver and the microcontroller are available
in the appropriate datasheets, refer to 1.5 references.
The RF front-end incorporates signal amplification and filtering of the transmit signal.
The degree of filtering depends on operating conditions as well as regional aspects.
Switching between reception and transmission is directly controlled by the radio
transceiver.
3
CONSTRAINTS, ASSUMPTIONS, AND DEPENDENCIES
(1) Unless otherwise specified, all resistors, capacitors, inductors, & ferrite beads are
0402 size
(2) C202, C400, L200, and L300 are 0603 size
(3) The operating temperature range for all electrical components of LPZigBee
module is -40°C to +85°C.
(4) With FEM function: remove R200 & R203 & R208 and install R201 & R205 &
R207
(5) Bypass FEM function for MMCX: remove U201 & R201 & R205, R207 & R202
& R204 & C200 & C201 & C202 &C203 and install R200 & R203 & R208
(6) Bypass FEM function for PCB Antenna: remove U201 & R207 & R201 & R202
& R204 & R208 & C200 & C201 & C202 &C203 and install R200 & R203 & R205
(7) The impedances of Nets (RF_1, RF_2, RF_FEM, RF_BYPASS, ANT_1, ANT_2,
ANT_F, and MMCX) are 50 ohm in PCB layout.
(8) The following clocks of Nets (SPI_CLK, I2C_SCL, SCLK, MEM_SCK, CLKM and
CLK_OUT) should follow the 3W rule for layout.
4
FEATURES
Ultra compact size
High RX sensitivity (-103 dBm)
Outperforming link budget (123 dB)
Up to +20 dBm output power
Very low power consumption:
 <6 µA in Sleep mode,
 18 mA in RX mode,
 132 mA in TX mode@Pout is +20 dBm
Ample memory resources (256 bytes of flash memory, 16K bytes RAM, 4K bytes
EEPROM)
Wide range of interfaces (both analog and digital):
 8 spare GPIO,
 2 ADC lines
 UART
 I2C
 SPI
 JTAG
Capability to use MAC address written into EEPROM
IEEE 802.15.4 compliance
2.4 GHz ISM band
BitCloud embedded software, including UART bootloader and AT command set
5
BLOCK DIAGRAM AND PORT FUNCTION
5.1
UART PORT
LPZigBee Module provides four signals (RX, TX) of standard RS-232 protocol to
support user applications. The UART port is set the DCE port and connected with
other devices by D-Sub-9 Female connector. But the RX, TX connection between
RS-232 Transceiver and D-Sub-9 Female connector can be reversed by Jumpers,
allowing use of connecting straight-though or cross-wires cable.
5.2
PROGRAMMING AND DEBUG PORT
The LPZigBee module can be programmed and debugged by JTAG port. It is a 20
pins header and connects with Atmel’s debugging tool.
5.3
GPIO PORT
The GPIO connectors provide the SPI, I2C, UART and GPIO interface for external
system testing. The recommended operation voltage is +3.3Vdc.
6
DETAIL SPECIFICATIONS
6.1
PIN ASSIGNMENT
6.1.1
LPZigBee Module
Pin
Signal
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
SPI_MISO
SPI_MOSI
SPI_SCK
SPI_SS_L
UART_RXD
UART_TXD
I2C_SCL
I2C_SDA
JTAG_TCK
JTAG_TMS
JTAG_TDO
JTAG_TDI/PDI
RESET_L
CLK_OUT
ADC1
ADC2
PWM1_DC1
PWM1_DC2
PWM2_DC1
PWM2_DC2
GPIO1
GPIO2
GPIO3
GPIO4
GPIO5
GPIO6
GPIO7
GPIO8
VCC
VCC
VCC
VCC
GND
GND
GND
GND
GND
Connection for 2-chip solution
(ATxmega256D3)
PD6/MISO
PD5/MOSI
PD7/SCK
PD4/SSN
PE2/RXD0
PE3/TXD0
PE1/SCL
PE0/SDA
nc
nc
nc
PDI
RESET
PR0/xtal1
PB0/ACD8
PB1/ACD9
PF0/OC0A
PF1/OC0B
PE4/OC1A
PE5/OC1B
PF2/INT/OC0C
PF3/INT/OC0D
PF4/INT
PF5/INT
PF6/INT
PF7/INT
PB2/INT/ADC10
PB3/INT/ADC11
Power Plane
Power Plane
Power Plane
Power Plane
Ground Plane
Ground Plane
Ground Plane
Ground Plane
Ground Plane
38
39
40
6.2
GND
SPARE1
SPARE2
Ground Plane
THE PCB OUTLINE FOR LPZIGBEE MODULE
6.3
ELECTRICAL SPECIFICATION
6.3.1
DC power supply range
6.3.2
System module
power supply range
Ateml solution w/o FEM
1.8~3.6V
Ateml solution with SE2431L@
NF of LNA=2 dB
Gain of LNA=12.5 dB
1.8~3.6V (Transceiver)
2.0~3.6V (FEM)
System dBm max & min (maximum and minimum TX output at
PCB antenna) and System current & power drawn.
System module
maximum TX output
minimum TX output
Ateml solution w/o FEM
2.1dBm@I=14mA
(-17.9)dBm@I=7.4mA
Ateml solution with SE2431L@
NF of LNA=2 dB
Gain of LNA=12.5 dB
21dBm@Icc=134.13mA
5.6dBm@>37.4mA
6.3.3
System current & power drawn of TX@20dBm and RX
System module
TX@20dBm
RX
Ateml solution w/o FEM
NA
I=12.3 mA
Ateml solution with SE2431L@
NF of LNA=2 dB
Gain of LNA=12.5 dB
6.3.4
I=130.83 mA I=17.3 mA
System Current and Power consumption during idle and hibernate
mode
System module
Ateml solution w/o FEM
Ateml solution with SE2431L@
NF of LNA=2 dB
Gain of LNA=12.5 dB
Idle mode Hibernate
mode
7mA @
32MHz
7mA @
32MHz
100nA
100nA
6.3.5
System RX Sensitivity (dBm)
System module
Sensitivity
(dBm)
Ateml solution w/o FEM
(-99.6)
Ateml solution with SE2431L@
NF of LNA=2 dB
Gain of LNA=12.5 dB
(-103.63)
Federal Communication Commission Interference Statement
This module has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device is intended only for OEM integrators under the following conditions:
1)
The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2)
The transmitter module may not be co-located with any other transmitter or
antenna,
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed (for example,
digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain
laptop configurations or co-location with another transmitter), then the FCC authorization is
no longer considered valid and the FCC ID can not be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final end
product must be labeled in a visible area with the following: “Contains FCC ID: ZARTGPBA0010290”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’s manual of the end
product which integrates this module.
The end user manual shall include all required regulatory information/warning as
show in this manual.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
About                           : 264b3771-4bb2-11e0-0000-0fb7c752dd49
Producer                        : AFPL Ghostscript 8.54
Modify Date                     : 2011:03:08 15:43:38+08:00
Create Date                     : 2011:03:08 15:35:12+08:00
Creator Tool                    : PDFCreator Version 0.9.2
Metadata Date                   : 2011:03:08 15:43:38+08:00
Document ID                     : 264b3771-4bb2-11e0-0000-0fb7c752dd49
Instance ID                     : uuid:aed2d104-627e-4568-b12d-1cc19ea92f5e
Format                          : application/pdf
Title                           : Atmel Module Product Manual_Update by BVADT_v2
Creator                         : JESSIE
Page Count                      : 12
Author                          : JESSIE

EXIF Metadata provided by EXIF.tools