GuangZhou SunFieldAimo Electronic Technology CG-1301 Single Axis Wireless Mini Controller User Manual Mini Fingerwheel Controller Manual
GuangZhou SunFieldAimo Electronic Technology Co., Ltd Single Axis Wireless Mini Controller Mini Fingerwheel Controller Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3653559 |
| Application ID | 3hyt7zdxkswRIMxRduileA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 102.37kB (1279658 bits) |
| Date Submitted | 2017-11-27 00:00:00 |
| Date Available | 2017-11-27 00:00:00 |
| Creation Date | 2017-09-07 16:39:50 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2017-11-20 13:49:02 |
| Document Title | Mini_Fingerwheel_Controller_Manual |
| Document Creator | Adobe Illustrator CC 2017 (Macintosh) |
Single Axis Wireless Mini Controller MANUAL BOOK Product Name: Single Axis Wireless Mini Controller Brand: CINEGEARS Model:CG-1301,CG-2107 Manufacture: GuangZhou SunFieldAimo Electronic Technology Co., Ltd © 2017 Cine Gears INC. All Rights Reserved. Instructions Turn On/Off the Fingerwheel Controller Hold the (REC) button for three seconds to turn the Fingerwheel Controller On/Off. Hold the (REC) button on your Fingerwheel controller for three seconds to turn it on. When your Fingerwheel Controller is on, hold the (REC) button for three seconds to turn it off. The number that shows up on your Fingerwheel controller when you turn it on will show the Fingerwheel controller’s battery percentage. Synchronize the Fingerwheel Controller Hold the button on the motor for three seconds then hold all three buttons on the Fingerwheel switch controller for three seconds. Hold the button on your motor for three seconds, when it changes from flashing blue to green, press and hold all three buttons, (REC), (A) and (B) on your Fingerwheel controller for three seconds. In this way, it synchronizes both the Fingerwheel controller and motor together. Automatic Lens Calibration Hold the (REC) and (A) button for three seconds. After your Fingerwheel controller and motor are synchronized, press and hold (REC) and (A) button on your Fingerwheel controller at the same time for three seconds, this activates the automatic lens calibration. This option is for the camera lens that has the hard stops. For the camera lens that does not have the hard stops, read the following manual lens calibration below. Manual Lens Calibration Hold the (REC) and (B) button for three seconds. Press the (A) button to rotate the lens clockwise, and then press the (A) button again to stop the rotation and press the (REC) button to set the start point. Press the (B) button to rotate counter clockwise and press the (B) button again to stop the rotation, and then press the (REC) button to choose the end point. After your Fingerwheel controller and motor are synchronized, press and hold the (REC) and the (B) button on your Fingerwheel Controller at the same time for three seconds until S-1 flashes.Then press and hold the (A) button for three seconds until the gear rotates. When your camera lens reaches the minimum focus distance, press on the (A) button again which makes the gear stop rotating. Then press the (REC) button to set your camera minimum focus distance point. After you set the minimum focus distance point, S-2 should be flashing. Then press and hold the (B) button for three seconds, the gear will then rotate to the opposite direction. When it reaches your camera’s maximum focus distance point, you have to press the (B) button again to stop the rotation of the gear. Then press the (REC) button to set the camera’s maximum focus distance. Remember, you can always press on the (A) button or the (B) button for the micro adjustments when it passes the camera’s focus distance. Setting up Two Preset Points Push the switch, press and hold (A) and (B) button for three seconds Push the Fingerwheel switch on your Fingerwheel controller to a lens focus distance point, then press and hold the (A) button for three seconds to record that point. Then move on to the next lens focus distance point, press and hold the (B) button for three seconds to record your second lens focus distance point. © 2017 Cine Gears INC. All Rights Reserved. Instructions Setting up a Preset Hold the (A) and (B) button for three seconds to get the accessibility to the espresso function manual. F01 is the motor rotating speed option. F03 is the manual lens calibration option. F05 is the recalibrating focus controller option. When you press and hold the (A) and (B) button on your Fingerwheel controller for three seconds, this gives you the accessibility to your espresso controller’s function manual. To enter each function you can just simply press the (REC) button. The F01 Function is the speed control which makes the gear rotate at a different range of speeds. Press on the (A) button or (B) button to change the number, the larger the number goes, the faster the gear rotates. After you choose a speed number, press the (REC) button again to let your Fingerwheel controller to record that number. Recalibrating the Focus Controller After you get to your Fingerwheel controller function manual, go to the F05 function. Push your Fingerwheel switch to the beginning point then press the (REC) button. Push your Fingerwheel switch again to a distance that you want then press the (REC) button again. First, go to your Fingerwheel function manual by pressing and holding the (A) and (B) button for three seconds at the same time. Then, go to the F05 function by pressing the (B) button for four times and press the (REC) button to enter that function. Push your Fingerwheel switch to beginning point and hold the (REC) button to record that rotation angle. Then push the switch again to your designated rotation angle, and hold the (REC) button again to record your second rotation angle. This sets up your full camera lens traveling distance to the angle you have set. In other words, the rotating distances of your camera lens will length while the distance of the controller will shorten. Manual Function Controls To access the function menu, hold down the A and B buttons for 3 seconds. You can navigate between functions with the A (Back) and B (Forward) buttons. Select function to adjust with REC button. Some functions are adjusted with the A (Reduce) and B (Increase) buttons, while others are adjusted with the Fingerwheel Switch itself. F01 – Speed Adjustment setting. Choose from 1 -15 using the A and B buttons, 1 being the slowest speed and 15 being the fastest. F02 – Automatic Motor Calibration. Yields the same result as holding down REC, A and B for 3 seconds. F03 – Manual lens Calibration. Allows you to manually set the maximum and minimum motor positions. F04 – EXIT. This function exits the menu without any changes. F05 – Manual Range. This will allow you to set the effective range of your Fingerwheel Switch. F06 – Reverse Spin Direction. Determines which way the motor will spin, it yields the same result as the button on the motor itself. F07 – Flip the LED display. This function flips the LED display upside-down, for those who prefer to use the Fingerwheel Switch in different ways. © 2017 Cine Gears INC. All Rights Reserved. FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : Mini_Fingerwheel_Controller_Manual Metadata Date : 2017:11:20 13:49:02+08:00 Modify Date : 2017:11:20 13:49:02+08:00 Create Date : 2017:09:07 16:39:50-07:00 Creator Tool : Adobe Illustrator CC 2017 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 112 Thumbnail Format : JPEG Thumbnail Image : (Binary data 10976 bytes, use -b option to extract) Instance ID : uuid:4f40721b-8cc6-4eb2-a6a1-452321928749 Document ID : xmp.did:f8441841-37fd-4678-9925-3302a896995c Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:9cd437a4-161b-4d87-8890-8195f69c8cec Derived From Document ID : xmp.did:9cd437a4-161b-4d87-8890-8195f69c8cec Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:eb85f5c8-6e1b-49bf-b733-27c1cc609100, xmp.iid:f8441841-37fd-4678-9925-3302a896995c History When : 2017:09:07 16:26:51-07:00, 2017:09:07 16:39:50-07:00 History Software Agent : Adobe Illustrator CC 2017 (Macintosh), Adobe Illustrator CC 2017 (Macintosh) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 612.000000 Max Page Size H : 792.000000 Max Page Size Unit : Points Font Name : ArialMT, Arial-BoldMT, Impact, MyriadPro-Regular Font Family : Arial, Arial, Impact, Myriad Pro Font Face : Regular, Bold, Regular, Regular Font Type : Open Type, Open Type, Open Type, Open Type Font Version : Version 5.01.2x, Version 5.01.2x, Version 5.00x, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329 Font Composite : False, False, False, False Font File Name : Arial.ttf, Arial Bold.ttf, Impact.ttf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group, Grays, Brights Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100 Producer : Adobe PDF library 15.00 Page Count : 5 Creator : Adobe Illustrator(R) 17.0 For : aivfx inc, Bounding Box : -9 -784 1872 26 Container Version : 11 Creator Version : 21EXIF Metadata provided by EXIF.tools