Guangzhou Havit Technology H33 Wireless Charger User Manual

Guangzhou Havit Technology Co.,LTD Wireless Charger

User Manual

User Manual
Product Introduction:Thanks for your choosing our wireless charger, this iswireless charger which supports quick charging foriPhone8/8 Plus/X, Before you use this product, Pleaseread this manual carefully and save it.Specification:Product Name: Wireless ChargerProduct Model: H33Input: 5V 2A/9V 1.67A（Max）Frequency: 111-205KhzConversation Efficiency: >70%（Min）Charging distance: ≤8mmProduct size: 85mm*85mm*7.6mmMirco USB
Applicable: Mobile phone (mobile phone with wirelesscharging function or built-in wireless charging ring)PS: these above information is based on real sample testing, itwill be a little bit different for different products in differentconditions.LED indication:1. After plug this product into adaptor, white light will glitterand last 0.5S, then get into standby mode.2. Charging mode: white light is breathing.3. Fully charged for iPhone, white light is always on.4. FOD: white light flicker fast.Caution:1. To achieve best performance of this wireless charger, 5V 2Aor 9V 1.5A adapter is suggested to adapted.2. In the process of charging, do not put any metal materialslike key, ring, metallic phone case etc.. on the back of phonedevice or wireless charger directly3. It may occur occasional intermittent charging or seriousheating due to the unjustified position of phone receiver coiland wireless charging, please try to cold your phone, thenmove your phone to carry out the alignment
4. This product has over current protection, it will be shut offor reduce output if used in incorrect way, Please checkwhether your device is abnormal or not.5. Please use this product under temperature of -10 °c-40° c,DO NOT Expose the product to water, fire, or overheated andlower temperature environment, the product will beunavailable, Do not let children to touch accessories.6. Please use clean cloth to clear product surface, DO NOT usechemistry material and soap to clean.7. Manufacturer will not be responsible for those defectswhich caused by users, Please kindly understand.8. iPhone will NOT be quick charged in below three status:9. The electricity power >60%10. iPhone’s temperature: > 40°cFCC STATEMENT :This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that maycause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. Thisequipment generates uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operatedwith minimum distance 20cm between the radiator & your body

Navigation menu