Guangzhou Havit Technology H33 Wireless Charger User Manual
Guangzhou Havit Technology Co.,LTD Wireless Charger
User Manual
User Manual Product Introduction: Thanks for your choosing our wireless charger, this is wireless charger which supports quick charging for iPhone8/8 Plus/X, Before you use this product, Please read this manual carefully and save it. Mirco USB Specification: Product Name: Wireless Charger Product Model: H33 Input: 5V 2A/9V 1.67A(Max) Frequency: 111-205Khz Conversation Efficiency: >70%(Min) Charging distance: ≤8mm Product size: 85mm*85mm*7.6mm Applicable: Mobile phone (mobile phone with wireless charging function or built-in wireless charging ring) PS: these above information is based on real sample testing, it will be a little bit different for different products in different conditions. LED indication: 1. After plug this product into adaptor, white light will glitter and last 0.5S, then get into standby mode. 2. Charging mode: white light is breathing. 3. Fully charged for iPhone, white light is always on. 4. FOD: white light flicker fast. Caution: 1. To achieve best performance of this wireless charger, 5V 2A or 9V 1.5A adapter is suggested to adapted. 2. In the process of charging, do not put any metal materials like key, ring, metallic phone case etc.. on the back of phone device or wireless charger directly 3. It may occur occasional intermittent charging or serious heating due to the unjustified position of phone receiver coil and wireless charging, please try to cold your phone, then move your phone to carry out the alignment 4. This product has over current protection, it will be shut off or reduce output if used in incorrect way, Please check whether your device is abnormal or not. 5. Please use this product under temperature of -10 ° c-40 ° c, DO NOT Expose the product to water, fire, or overheated and lower temperature environment, the product will be unavailable, Do not let children to touch accessories. 6. Please use clean cloth to clear product surface, DO NOT use chemistry material and soap to clean. 7. Manufacturer will not be responsible for those defects which caused by users, Please kindly understand. 8. iPhone will NOT be quick charged in below three status: 9. The electricity power >60% 10. iPhone’s temperature: > 40°c FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Administrator Description : Title : Comments : Company : Source Modified : D:20180731142735+06'27' Create Date : 2018:07:31 14:27:35+06:00 Creator Tool : WPS Office Modify Date : 2018:08:06 18:19:29+08:00 Metadata Date : 2018:08:06 18:19:29+08:00 Keywords : Producer : Document ID : uuid:2a5bb95b-0e19-447e-8e88-5bd5230db3fc Instance ID : uuid:9fb57fc1-8cc3-4c8b-b99f-4711ac01a90e Page Count : 5 Author : Administrator Subject : Trapped : falseEXIF Metadata provided by EXIF.tools