Guangzhou Shirui Electronics RK3399 Android Module User Manual AP6255 datasheet V1 1 04262015
Guangzhou Shirui Electronics Co., Ltd Android Module AP6255 datasheet V1 1 04262015
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3395392 |
| Application ID | MjyzNnZDxkgBsMBm2QOXEA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 177.69kB (2221182 bits) |
| Date Submitted | 2017-05-18 00:00:00 |
| Date Available | 2017-11-15 00:00:00 |
| Creation Date | 2015-05-14 20:26:06 |
| Producing Software | GPL Ghostscript 8.15 |
| Document Lastmod | 2017-05-15 20:35:27 |
| Document Title | Microsoft Word - AP6255 datasheet_V1.1_04262015 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | user |
正基科技股份有限公司 正基科技股份有限公司 SPECIFICATION SPEC. NO.： ： DATE： ： REV： 1.1 04. 26. 2015 PRODUCT NAME： ： APPROVED AP6255 CHECKED PREPARED DCC ISSUE NAME AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information AMPAK AP6255 WiFi 11ac + Bluetooth 4.1 Module Spec Sheet AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet Revision History Date Revision Content Revised By Version 2015/04/09 - Preliminary Gary 1.0 2015/04/26 - Add GPIO pin definiion Gary 1.1 AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet Contents Contents ................................................................................................................... 3 1. Introduction......................................................................................................... 4 2. Features............................................................................................................... 5 3. Deliverables ........................................................................................................ 6 3.1 Deliverables .................................................................................................... 6 3.2 Regulatory certifications ................................................................................. 6 4. General Specification ......................................................................................... 7 4.1 General Specification ...................................................................................... 7 4.2 Voltages .......................................................................................................... 7 4.2.1 Absolute Maximum Ratings .................................................................... 7 4.2.2 Recommended Operating Rating ........................................................... 7 The module requires two power supplies: VBAT and VDDIO. ......................... 7 5. Wi-Fi RF Specification ........................................................................................ 8 5.1 2.4GHz RF Specification................................................................................. 8 5.1 5GHz RF Specification.................................................................................. 10 6. Bluetooth Specification.................................................................................... 13 6.1 Bluetooth Specification ................................................................................. 13 7. Pin Assignments ............................................................................................... 14 7.1 Pin Outline .................................................................................................... 14 7.2 Pin Definition ................................................................................................ 14 8. Dimensions ....................................................................................................... 16 8.1 Physical Dimensions .................................................................................... 16 8.2 Layout Recommendation .............................................................................. 17 9. External clock reference .................................................................................. 18 10.1 SDIO Pin Description .................................................................................. 19 10. Host Interface Timing Diagram ........................................................................ 20 10.1 Power-up Sequence Timing Diagram ......................................................... 20 10.2 SDIO Default Mode Timing Diagram........................................................... 22 10.3 SDIO High Speed Mode Timing Diagram ................................................... 23 10.4 SDIO Bus Timing Specifications in SDR Modes ......................................... 24 10.5 SDIO Bus Timing Specifications in DDR50 Mode ....................................... 26 11. Recommended Reflow Profile ......................................................................... 28 Solder Paste definition .......................................................................................... 29 12. Package Information ........................................................................................ 30 12.1 Label ........................................................................................................... 30 Label C Inner box label . .................................................................................... 30 Label D Carton box label . ................................................................................. 30 AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet 12.2 Dimension................................................................................................... 31 12.3 MSL Level / Storage Condition ................................................................... 33 1. Introduction AMPAK Technology would like to announce a low-cost and low-power consumption module which has all of the Wi-Fi, Bluetooth functionalities. The highly integrated module makes the possibilities of web browsing, VoIP, Bluetooth headsets applications. With seamless roaming capabilities and advanced security, also could interact with different vendors’ 802.11a/b/g/n/ac Access Points in the wireless LAN. The wireless module complies with IEEE 802.11 a/b/g/n/ac standard and it can achieve up to a speed of 433.3Mbps with single stream in 802.11ac draft to connect to the wireless LAN. The integrated module provides SDIO interface for Wi-Fi, UART / PCM interface for Bluetooth. This compact module is a total solution for a combination of Wi-Fi + BT technologies. The module is specifically developed for Smart phones and Portable devices. AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet 2. Features IEEE 802.11a/b/g/n/ac dual-band radio with virtual-simultaneous dual-band operation Single-stream spatial multiplexing up to 433.3 Mbps data rate. Supports 20, 40, 80 MHz channels with optional SGI(256 QAM modulation) Bluetooth V4.0+EDR with integrated Class 1 PA and Low Energy (BLE) support Concurrent Bluetooth, and WLAN operation Simultaneous BT/WLAN receive with single antenna Supports standard SDIO v3.0 and backward compatible with SDIO v2.0 host interfaces. - SDIO v3.0(4-bit) — up to 208 MHz clock rate in SDR104 mode BT host digital interface: - UART (up to 4 Mbps) IEEE Co-existence technologies are integrated die solution ECI — enhanced coexistence support, ability to coordinate BT SCO transmissions around WLAN receives A simplified block diagram of the module is depicted in the figure below. AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet 3. Deliverables 3.1 Deliverables The following products and software will be part of the product. Module with packaging Evaluation Kits Software utility for integration, performance test. Product Datasheet. Agency certified pre-tested report with the adapter board. 3.2 Regulatory certifications The product delivery is a pre-tested module, without the module level certification. For module approval, the platform’s antennas are required for the certification. AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet 4. General Specification 4.1 General Specification Model Name AP6255 Product Description Support Wi-Fi/Bluetooth functionalities Dimension L x W x H: 12 x 12 x 1.5 (typical) mm WiFi Interface SDIO v2.0/v3.0 BT Interface UART / PCM Operating temperature -30°C to 85°C Storage temperature -40°C to 85°C Humidity Operating Humidity 10% to 95% Non-Condensing Storage Humidity 5% to 95% Non-Condensing 4.2 Voltages 4.2.1 Absolute Maximum Ratings Symbol VBAT VDDIO Description Min. Max. Unit Input supply Voltage -0.5 Digital/Bluetooth/SDIO/ I/O Voltage -0.5 3.9 4.2.2 Recommended Operating Rating The module requires two power supplies: VBAT and VDDIO. Min. Typ. Max. Unit -30 25 85 VBAT 3.13 3.6 4.8 deg.C VDDIO 1.71 1.8 3.63 Operating Temperature AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet 5. Wi-Fi RF Specification 5.1 2.4GHz RF Specification Conditions : VBAT=3.6V ; VDDIO=3.3V ; Temp:25°C Feature Description WLAN Standard IEEE 802.11b/g/n/ac, WiFi compliant Frequency Range 2.400 GHz ~ 2.497 GHz (2.4 GHz ISM Band) Number of Channels 2.4GHz：Ch1 ~ Ch14 Modulation 802.11b : DQPSK, DBPSK, CCK 802.11g/n : 64-QAM,16-QAM, QPSK, BPSK 802.11ac : 256-QAM, 64-QAM,16-QAM, QPSK, BPSK 802.11b /CCK Output Power : 16 dBm ± 1.5 dB @ EVM ≤ -9dB 802.11g /64-QAM(R=3/4) : 15 dBm ± 1.5 dB @ EVM ≤ -25dB 802.11n /64-QAM(R=5/6) : 14 dBm ± 1.5 dB @ EVM ≤ -28dB Receive Sensitivity (11b) @8% PER Receive Sensitivity (11g) @10% PER Receive Sensitivity (11n,20MHz) @10% PER Receive Sensitivity (11n,40MHz) AMPAK Technology Inc. Doc. NO: 1Mbps PER @ -96 dBm, typical 2Mbps PER @ -90 dBm, typical - 5.5Mbps PER @ -88 dBm, typical - 11Mbps PER @ -87 dBm, typical 6Mbps PER @ -90 dBm, typical 9Mbps PER @ -88 dBm, typical - 12Mbps PER @ -87 dBm, typical - 18Mbps PER @ -85 dBm, typical - 24Mbps PER @ -83 dBm, typical - 36Mbps PER @ -80 dBm, typical - 48Mbps PER @ -76 dBm, typical - 54Mbps PER @ -74 dBm, typical - MCS=0 PER @ -89 dBm, typical - MCS=1 PER @ -85 dBm, typical - MCS=2 PER @ -84 dBm, typical - MCS=3 PER @ -80 dBm, typical - MCS=4 PER @ -77 dBm, typical - MCS=5 PER @ -75 dBm, typical - MCS=6 PER @ -72 dBm, typical - MCS=7 PER @ -71 dBm, typical - MCS=0 PER @ -89 dBm, typical - MCS=1 PER @ -85 dBm, typical www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet @10% PER Receive Sensitivity (11ac,20MHz) @10% PER Receive Sensitivity (11ac,40MHz) @10% PER - MCS=2 PER @ -84 dBm, typical - MCS=3 PER @ -80 dBm, typical - MCS=4 PER @ -76 dBm, typical - MCS=5 PER @ -72 dBm, typical - MCS=6 PER @ -70 dBm, typical - MCS=7 PER @ -69 dBm, typical - MCS=0 PER @ -90 dBm, typical - MCS=1 PER @ -87 dBm, typical - MCS=2 PER @ -86 dBm, typical - MCS=3 PER @ -82 dBm, typical - MCS=4 PER @ -79 dBm, typical - MCS=5 PER @ -75 dBm, typical - MCS=6 PER @ -73 dBm, typical - MCS=7 PER @ -72 dBm, typical - MCS=8 PER @ -67 dBm, typical - MCS=0 PER @ -88 dBm, typical - MCS=1 PER @ -85 dBm, typical - MCS=2 PER @ -83 dBm, typical - MCS=3 PER @ -80 dBm, typical - MCS=4 PER @ -77 dBm, typical - MCS=5 PER @ -72 dBm, typical - MCS=6 PER @ -71 dBm, typical - MCS=7 PER @ -69 dBm, typical - MCS=8 PER @ -65 dBm, typical - MCS=9 PER @ -64 dBm, typical 802.11b : -10dBm Maximum Input Level 802.11g/n : -20dBm 802.11ac : -30dBm Antenna Reference AMPAK Technology Inc. Doc. NO: Small antennas with 0~2 dBi peak gain www.ampak.com.tw Proprietary & Confidential Information AP6255 Datasheet 5.1 5GHz RF Specification Conditions : VBAT=3.6V ; VDDIO=3.3V ; Temp:25°C Feature Description WLAN Standard IEEE 802.11a/b/g/n/ac, Wi-Fi compliant Frequency Range 4.900 GHz ~ 5.845 GHz (5.0 GHz ISM Band) Number of Channels 5.0GHz：Please see the table1 Modulation 802.11a/n : 64-QAM,16-QAM, QPSK, BPSK 802.11ac : 256-QAM, 64-QAM,16-QAM, QPSK, BPSK 802.11a /64-QAM(R=3/4) : 14 dBm ± 1.5 dB @ EVM ≤ -25dB Output Power 802.11n /64-QAM(R=5/6) : 13 dBm ± 1.5 dB @ EVM ≤ -28dB 802.11ac/256-QAM(R=3/4) : 12 dBm ± 1.5 dB @ EVM ≤ -30dB 802.11ac/256-QAM(R=5/6) : 10 dBm ± 1.5 dB @ EVM ≤ -32dB Receive Sensitivity (11a, 20MHz) @10% PER Receive Sensitivity (11n,20MHz) @10% PER Receive Sensitivity (11n,40MHz) @10% PER AMPAK Technology Inc. Doc. NO: 6Mbps PER @ -91 dBm, typical 9Mbps PER @ -89 dBm, typical - 12Mbps PER @ -88 dBm, typical - 18Mbps PER @ -86 dBm, typical - 24Mbps PER @ -82 dBm, typical - 36Mbps PER @ -79 dBm, typical - 48Mbps PER @ -74 dBm, typical - 54Mbps PER @ -73 dBm, typical - MCS=0 PER @ -90 dBm, typical - MCS=1 PER @ -88 dBm, typical - MCS=2 PER @ -85 dBm, typical - MCS=3 PER @ -82 dBm, typical - MCS=4 PER @ -78 dBm, typical - MCS=5 PER @ -74 dBm, typical - MCS=6 PER @ -72 dBm, typical - MCS=7 PER @ -71 dBm, typical - MCS=0 PER @ -88 dBm, typical - MCS=1 PER @ -85 dBm, typical - MCS=2 PER @ -83 dBm, typical - MCS=3 PER @ -79 dBm, typical - MCS=4 PER @ -76 dBm, typical - MCS=5 PER @ -71 dBm, typical - MCS=6 PER @ -70 dBm, typical - MCS=7 PER @ -68 dBm, typical www.ampak.com.tw Proprietary & Confidential Information 10 AP6255 Datasheet Receive Sensitivity (11ac,20MHz) @10% PER Receive Sensitivity (11ac,40MHz) @10% PER Receive Sensitivity (11ac,80MHz) @10% PER Maximum Input Level Antenna Reference AMPAK Technology Inc. Doc. NO: - MCS=0 PER @ -89 dBm, typical - MCS=1 PER @ -87 dBm, typical - MCS=2 PER @ -84 dBm, typical - MCS=3 PER @ -81 dBm, typical - MCS=4 PER @ -77 dBm, typical - MCS=5 PER @ -73 dBm, typical - MCS=6 PER @ -71 dBm, typical - MCS=7 PER @ -70 dBm, typical - MCS=8 PER @ -66 dBm, typical - MCS=0 PER @ -87 dBm, typical - MCS=1 PER @ -83 dBm, typical - MCS=2 PER @ -81 dBm, typical - MCS=3 PER @ -78 dBm, typical - MCS=4 PER @ -75 dBm, typical - MCS=5 PER @ -70 dBm, typical - MCS=6 PER @ -68 dBm, typical - MCS=7 PER @ -66 dBm, typical - MCS=8 PER @ -64 dBm, typical - MCS=9 PER @ -63 dBm, typical - MCS=0 PER @ -83 dBm, typical - MCS=1 PER @ -80 dBm, typical - MCS=2 PER @ -78 dBm, typical - MCS=3 PER @ -74 dBm, typical - MCS=4 PER @ -71 dBm, typical - MCS=5 PER @ -69 dBm, typical - MCS=6 PER @ -65 dBm, typical - MCS=7 PER @ -63 dBm, typical - MCS=8 PER @ -60 dBm, typical - MCS=9 PER @ -59 dBm, typical 802.11a/n : -20dBm 802.11ac : -30dBm Small antennas with 0~2 dBi peak gain www.ampak.com.tw Proprietary & Confidential Information 11 AP6255 Datasheet 5GHz Channel table Band (GHz) 5.15GHz~5.25GHz 5.25GHz~5.35GHz 5.5GHz~5.7GHz 5.725GHz~5.825GHz AMPAK Technology Inc. Doc. NO: Operating Channel Numbers 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165 www.ampak.com.tw Channel center frequencies(MHz) 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 5805 5825 Proprietary & Confidential Information 12 AP6255 Datasheet 6. Bluetooth Specification 6.1 Bluetooth Specification Conditions : VBAT=3.6V ; VDDIO=3.3V ; Temp:25°C Feature Description General Specification Bluetooth Standard Bluetooth V4.0 of 1, 2 and 3 Mbps. Host Interface UART Antenna Reference Small antennas with 0~2 dBi peak gain Frequency Band 2402 MHz ~ 2480 MHz Number of Channels 79 channels Modulation FHSS, GFSK, DPSK, DQPSK RF Specification Min. Typical. Output Power (Class 1.5) 9 dBm Output Power (Class 2) 2 dBm Sensitivity @ BER=0.1% for GFSK (1Mbps) -86 dBm Sensitivity @ BER=0.01% for π/4-DQPSK (2Mbps) -86 dBm Sensitivity @ BER=0.01% for 8DPSK (3Mbps) -80 dBm Max. GFSK (1Mbps) :-20dBm Maximum Input Level π/4-DQPSK (2Mbps) :-20dBm 8DPSK (3Mbps) :-20dBm AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 13 AP6255 Datasheet 7. Pin Assignments 7.1 Pin Outline < TOP VIEW > 7.2 Pin Definition NO Name Type Description GND － Ground connections WL_BT_ANT I/O RF I/O port GND － Ground connections NC － Floating (Don’t connected to ground) NC － Floating (Don’t connected to ground) BT_WAKE HOST wake-up Bluetooth device BT_HOST_WAKE Bluetooth device to wake-up HOST NC － Floating (Don’t connected to ground) VBAT Main power voltage source input 10 XTAL_IN Crystal input 11 XTAL_OUT Crystal output 12 WL_REG_ON Power up/down internal regulators used by WiFi section 13 WL_HOST_WAKE WLAN to wake-up HOST AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 14 AP6255 Datasheet 14 SDIO_DATA_2 I/O SDIO data line 2 15 SDIO_DATA_3 I/O SDIO data line 3 16 SDIO_DATA_CMD I/O SDIO command line 17 SDIO_DATA_CLK I/O SDIO clock line 18 SDIO_DATA_0 I/O SDIO data line 0 19 SDIO_DATA_1 I/O SDIO data line 1 20 GND － Ground connections 21 VIN_LDO_OUT Internal Buck voltage generation pin 22 VDDIO I/O Voltage supply input 23 VIN_LDO Internal Buck voltage generation pin 24 LPO External Low Power Clock input (32.768KHz) 25 PCM_OUT PCM Data output 26 PCM_CLK I/O PCM clock 27 PCM_IN PCM data input 28 PCM_SYNC I/O PCM sync signal 29 SDIO_VSEL I/O SDIO mode selection pin 30 NC － Floating (Don’t connected to ground) 31 GND － Ground connections 32 NC － Floating (Don’t connected to ground) 33 GND － Ground connections 34 BT_REG_ON Power up/down internal regulators used by BT section 35 NC － Floating (Don’t connected to ground) 36 GND － Ground connections 37 GPIO_6 I/O GPIO configuration pin 38 GPIO_3 I/O GPIO configuration pin 39 GPIO_5 I/O GPIO configuration pin 40 GPIO_2 I/O GPIO configuration pin 41 UART_RTS_N Bluetooth UART interface 42 UART_TXD Bluetooth UART interface 43 UART_RXD Bluetooth UART interface 44 UART_CTS_N Bluetooth UART interface 45 TP1(NC) － Floating (Don’t connected to ground) 46 TP2(NC) － Floating (Don’t connected to ground) 47 TP3(NC) － Floating (Don’t connected to ground) AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 15 AP6255 Datasheet 8. Dimensions 8.1 Physical Dimensions (Unit: mm) < TOP VIEW > < Side View > < TOP VIEW > AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 16 AP6255 Datasheet 8.2 Layout Recommendation (Unit: mm) < TOP VIEW > AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 17 AP6255 Datasheet 9. External clock reference External LPO signal characteristics Parameter Specification Units 32.768 kHz ± 30 ppm 30 - 70 Input signal amplitude 400 to 1800 mV, p-p Signal type Square-wave Nominal input frequency Frequency accuracy Duty cycle Input impedance >100k <5 pF Clock jitter (integrated over 300Hz – 15KHz) <1 Hz 0.7Vio - Vio Output high voltage AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Ω Proprietary & Confidential Information 18 AP6255 Datasheet 10.1 SDIO Pin Description All three package options of the WLAN section provide support for SDIO version 3.0 including the new UHS-I modes: DS: Default speed up to 25MHz (3.3V signaling). HS: High speed up to 50MH (3.3V signaling). SDR12: SDR up to 25MHz (1.8V signaling). SDR25: SDR up to 50MHz (1.8V signaling). SDR50: SDR up to 100MHz (1.8V signaling). SDR104: SDR up to 208MHz (1.8V signaling). DDR50: DDR up to 50MHz (1.8V signaling). The SDIO interface also has the ability to map the interrupt signal on to a GPIO pin for applications requiring an interrupt different from the one provided by SDIO interface. The ability to force control of gated clocks from within the device is also provided. The following three functions are supported: Function 0 Standard SDIO function (Max BlockSize / ByteCount = 32B) Function 1 Backplane Function to access the internal System On Chip (SOC) address space (Max BlockSize / ByteCount = 64B) Function 2 WLAN Function for efficient WLAN packet transfer through DMA (Max BlockSize/ByteCount=512B) SDIO Pin Description SD 4-Bit Mode DATA0 Data Line 0 DATA1 Data Line 1 or Interrupt DATA2 Data Line 2 or Read Wait DATA3 Data Line 3 CLK Clock CMD Command Line AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 19 AP6255 Datasheet 10. Host Interface Timing Diagram 10.1 Power-up Sequence Timing Diagram The module has signals that allow the host to control power consumption by enabling or disabling the Bluetooth, WLAN and internal regulator blocks. These signals are described below. Additionally, diagrams are provided to indicate proper sequencing of the signals for carious operating states. The timing value indicated are minimum required values: longer delays are also acceptable. ※ WL_REG_ON: Used by the PMU to power up or power down the internal regulators used by the WLAN section. When this pin is high, the regulators are enabled and the WLAN section is out of reset. When this pin is low the WLAN section is in reset. ※ BT_REG_ON: Used by the PMU to power up or power down the internal regulators used by the BT section. Low asserting reset for Bluetooth. This pin has no effect on WLAN and does not control any PMU functions. This pin must be driven high or low (not left floating). WLAN=ON, Bluetooth=ON AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 20 AP6255 Datasheet WLAN=OFF, Bluetooth=OFF WLAN=ON, Bluetooth=OFF WLAN=OFF, Bluetooth=ON AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 21 AP6255 Datasheet 10.2 SDIO Default Mode Timing Diagram AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 22 AP6255 Datasheet 10.3 SDIO High Speed Mode Timing Diagram AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 23 AP6255 Datasheet 10.4 SDIO Bus Timing Specifications in SDR Modes Clock timing (SDR Modes) Card Input timing (SDR Modes) AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 24 AP6255 Datasheet Card output timing (SDR Modes up to 100MHz) Card output timing (SDR Modes 100MHz to 208MHz) AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 25 AP6255 Datasheet ∆t OP Consideration for Variable Data Window (SDR 104 Mode) 10.5 SDIO Bus Timing Specifications in DDR50 Mode AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 26 AP6255 Datasheet Data Timing AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 27 AP6255 Datasheet 11. Recommended Reflow Profile Referred to IPC/JEDEC standard. Peak Temperature : <250°C Number of Times : ≤2 times ℃ 250 2.5°C/sec 40~70 sec ℃ 2.5 /sec AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 28 AP6255 Datasheet Solder Paste definition AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 29 AP6255 Datasheet 12. Package Information 12.1 Label Label A Anti-static and humidity notice Label B MSL caution / Storage Condition Label C Inner box label . Label D Carton box label . AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 30 AP6255 Datasheet 12.2 Dimension AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 31 AP6255 Datasheet Humidity indicator Desiccant AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 32 AP6255 Datasheet 12.3 MSL Level / Storage Condition ※NOTE : Accumulated baking time should not exceed 96hrs AMPAK Technology Inc. Doc. NO: www.ampak.com.tw Proprietary & Confidential Information 33 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. This End equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2AFG6-RK3399”. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Caution Exposure: This device meets the exemption from the routine evaluation limits in section 2.5 of RSS102 and users can obtain Canadian information on RF exposure and compliance. Le dispositif répond à l'exemption des limites d'évaluation de routine dans la section 2.5 de RSS102 et les utilisateurs peuvent obtenir des renseignements canadiens sur l'exposition aux RF et le respect. the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) des bandes de 5 250 à 5 350 MHz et de 5 650 à 5 850 MHz et, d’autre part, que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs de RL-EL. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. The final end product must be labelled in a visible area with the following: The Industry Canada certification label of a module shall be clearly visible at all times when installed in the host device, otherwise the host device must be labelled to display the Industry Canada certification number of the module, preceded by the words “Contains transmitter module”, or the word “Contains”, or similar wording expressing the same meaning, as follows: Contains transmitter module IC: 22166-RK3399 The module must be installed in Android Module This End equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps. The end user manual shall include all required regulatory information/warning as show in this manual. This radio transmitter (RK3399) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (RK3399) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. 2.4G: 5G:
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : user Create Date : 2015:05:14 20:26:06Z Modify Date : 2017:05:15 20:35:27+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : user Title : Microsoft Word - AP6255 datasheet_V1.1_04262015 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:05:15 20:35:27+08:00 Producer : GPL Ghostscript 8.15 Document ID : uuid:c9ea642f-e10e-4e3c-880a-9f8120fae9dd Instance ID : uuid:cddd0c06-77bf-4d85-97a9-a830385d73f4 Page Count : 36EXIF Metadata provided by EXIF.tools