Guangzhou Tendystar Telecom N2 Bluetoooth Headset User Manual

Guangzhou Tendystar Telecom Co.,Ltd Bluetoooth Headset Users Manual

Users Manual

User s GuideBluetooth Headset TENDYSTARBluetooth Headset TENDYSTARMODEL : N2
Introduction ····································································2Headset features ···························································3Charging ········································································4Wearing the headset ·····················································4Using the headset·To turn the headset on ····················································5·Turning the headset off ···················································5·Pairing the headset ·························································6·Making a call ··································································6 ·Redial the last number ····················································7 ·Voice Dialling ··································································7·Ending a call····································································7·Answering a call ······························································7·Adjusting the volume ·······················································8·Transferring a call from the Headset to the device ············8·Transferring a call from the device to the Headset ············8·How to change the housing ·············································8Limited Warranty·····························································9Disclaimer·····································································10ContentsIntroduction2The N2 headset is a wireless headset based on Bluetoothtechnology. Bluetooth technology is a standard for wireless short distanceradio communications. Devices such as a headset and a mobilephone or PDA, can communicate with each other without wires over a distance of approximately 10 meters. The N2 is a Bluetooth headset that supports two profiles: The Headset profile and the Hands-Free profile. It will work with any qualified Bluetooth device that supports the Headset profile or the Hands-Free profile. The N2 headset canbe used with a qualified Bluetooth mobile phone or PDA*(*) or another Bluetooth device supporting the Headset or Hands-Free profile. This user guide focuses on the use of this Bluetooth headset with a Bluetoothmobile phone.Your N2 will allow you to receive and make a call, adjust volume, without touching your mobile device. Bluetooth is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under its license term. All brand names are the property of their respective owners.
Headset features Charging / Wearing the headset3 4In the packageN2 Charging cable Housings User’s guideVolume downEar hook Talk/Power buttonCharging connectorMicrophoneVolume upWhen you receive your headsetthe battery will not be completelycharged. Before using the headset for thefirst time you should fully chargethe battery with the suppliedcharger.ChargingYou can put on the N2 Bluetoothheadset either on your left or right ear.To change ear, hold the headset firmlyand pull the ear hook away from the poston the back of the unit. Turn the ear hookover and replace on the small post.To wear the headset:extend the ear hook then slip it over the top of yourear, manoeuvre the speaker gently into your ear,squeeze the ear hook closed until the headset isheld securely on your ear.Wearing the headset
Using the headset5 6Press and hold the Talk button for 2~3 seconds, then theindicator light flashes according to the status of headset.(LED indication to check status.)To turn the headset onPress and hold the Talk button for 5 seconds, the indicator lightstops flashing.Turning the headset offDial a phone number on the mobile device's keypad.Press the Send/Call key.The call will automatically be transferred to the headset by pressing the Talk button.Making a call Before you use Bluetooth devices, some informations such asBluetooth address, pass code should be registered to bothdevices you are going to use. This process is called pairing.Once you have paired two devices, you don't need to do thisagain until you want to use the headset with another device.1. When you turn on, the headset is basically in waiting status. Press and hold the Volume Up/Down buttons at the same time until theheadset light rapidly flashes. 2. Now, the headset is in pairing mode.3. With your mobile device, search for headset as instructed in the device's user guide. 4. Enter the headset passkey of 0000.5. The N2 Bluetooth headset will now be ready to use with your mobile device.Pairing the headsetILED indications IHeadset Status LED indicationPairable v-v-v-v-v-v-v-v-vNot Connected ----v----v----v----vConnected vvvv-vvvv-vvvv-Audio Connected vvvvvvvvvvvvvvvv:light on, -:light out
Using the headset7 8When not in a call, press the Talk button until you hear the first beep.Redial the last number Ensure the headset is on and paired with a mobile device. Voice tags must have been recorded.When not in a call, press and hold the Talk button for a seconduntil you hear the second beep, and say one of your recordedvoice tags.The device will dial the number associated with the voice tag.Voice DiallingTo end a call, press the Talk button during a call.Ending a callOnce you hear an incoming call ring in the headset press the Talk button.Answering a callDuring a call press the Volume up or Volume down button to increase or decrease the volume. A beep will be heard for each step.Adjusting the volume Refer to your device's user manual.Transferring a call from the Headset to the deviceDuring a call press the Talk button.Transferring a call from the device to the HeadsetYou can pull out the existinghousing from the groove at thetop of the headset.Then, fix the included differentcolored housing into the headsetunit from the upper gap to theside & lower gap in a row.How to change the housing
Limited Warranty Disclaimer9101. This product was produced under strict quality management and inspection.2. All defective units within the applicable Warranty period/s will berepaired or replaced, in the case those faulty goods were handlednormally.3. To get Warranty service, return the unit to the outlet from which the unit was purchased.4. Fill in this Warranty card and keep it.5. Free of charge Warranty shall not apply to :-Defects or damage resulting from use of the unit in other than its normal and intended manner, eg, in excess of their maximum specifications or operating instructions.-Defects or damage from misuse, accident, neglect, improper testing,installation,alteration or modification of any kind, or spillage of food or liquid.Products name : Model number :Purchased date: Warranty period : 1yearOutlet the unit was purchased :Tel : Customer Address:Name :Tel :MODEL : N2The headset described in this guide is approved to be compliant with theBluetooth Specification and its profiles.is a trademark owned by Bluetooth SIG.All brand names are the property of their respective owners.FCC NOTICE TO USERS : FCC ID TNNN2< NOTICE >Section 15.19 Labelling requirementsThis device complies with part 15 of the FCC rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference and(2) This device must accept any interference received, including interferencethat may cause undesired operation.Section 15.21 Information to userThe changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.IMPORTANT NOTE: To comply with the FCC RF exposure compliancerequirements, no change to the antenna or the device is permitted. Any changeto the antenna or the device could result in the device exceeding the RFexposure requirements and void user's authority to operate the device.

Navigation menu