Guangzhou Tendystar Telecom N2 Bluetoooth Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	590283
Application ID	dQof4zaGiU+TwziDOzqsHA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.25kB (365596 bits)
Date Submitted	2005-10-11 00:00:00
Date Available	2005-10-11 00:00:00
Creation Date	2005-10-01 10:47:19
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2005-10-04 12:41:54
Document Title	Users Manual

Bluetooth Headset
TENDYSTAR
MODEL : N2
Bluetooth Headset
TENDYSTAR
User s Guide
Introduction
Contents
Introduction ····································································2
Headset features ···························································3
Charging ········································································4
Wearing the headset ·····················································4
Using the headset
·To turn the headset on ····················································5
·Turning the headset off ···················································5
·Pairing the headset ·························································6
·Making a call ··································································6
·Redial the last number ····················································7
·Voice Dialling ··································································7
·Ending a call····································································7
·Answering a call ······························································7
·Adjusting the volume ·······················································8
·Transferring a call from the Headset to the device ············8
·Transferring a call from the device to the Headset ············8
·How to change the housing ·············································8
Limited Warranty·····························································9
Disclaimer ·····································································10
The N2 headset is a wireless headset based on Bluetooth
technology.
Bluetooth technology is a standard for wireless short distance
radio communications. Devices such as a headset and a mobile
phone or PDA, can communicate with each other without wires
over a distance of approximately 10 meters.
The N2 is a Bluetooth headset that supports two profiles:
The Headset profile and the Hands-Free profile.
It will work with any qualified Bluetooth device that supports
the Headset profile or the Hands-Free profile. The N2 headset can
be used with a qualified Bluetooth mobile phone or PDA*
(*) or another Bluetooth device supporting the Headset or Hands-Free profile.
This user guide focuses on the use of this Bluetooth headset with a Bluetooth
mobile phone.
Your N2 will allow you to receive and make a call,
adjust volume, without touching your mobile device.
Bluetooth is a trademark owned by Bluetooth SIG, Inc.
and is used by the manufacturer under its license term.
All brand names are the property of their respective owners.
Headset features
Charging / Wearing the headset
Ear hook
Charging
Charging connector
When you receive your headset
the battery will not be completely
charged.
Before using the headset for the
first time you should fully charge
the battery with the supplied
charger.
Microphone
Wearing the headset
Volume up
You can put on the N2 Bluetooth
headset either on your left or right ear.
To change ear, hold the headset firmly
and pull the ear hook away from the post
on the back of the unit. Turn the ear hook
over and replace on the small post.
Volume down
Talk/Power button
In the package
To wear the headset:
N2
Charging cable
Housings
User’s guide
extend the ear hook then slip it over the top of your
ear, manoeuvre the speaker gently into your ear,
squeeze the ear hook closed until the headset is
held securely on your ear.
Using the headset
To turn the headset on
Pairing the headset
Press and hold the Talk button for 2~3 seconds, then the
indicator light flashes according to the status of headset.
(LED indication to check status.)
Before you use Bluetooth devices, some informations such as
Bluetooth address, pass code should be registered to both
devices you are going to use. This process is called pairing.
Once you have paired two devices, you don't need to do this
again until you want to use the headset with another device.
Turning the headset off
Press and hold the Talk button for 5 seconds, the indicator light
stops flashing.
ILED indications I
Headset Status
Pairable
Not Connected
Connected
Audio Connected
LED indication
v-v-v-v-v-v-v-v-v
----v----v----v----v
vvvv-vvvv-vvvvvvvvvvvvvvvvvvv
v:light on, -:light out
1. When you turn on, the headset is basically in waiting status.
Press and hold the Volume Up/Down buttons at the same time until the
headset light rapidly flashes.
2. Now, the headset is in pairing mode.
3. With your mobile device, search for headset as instructed in the device's
user guide.
4. Enter the headset passkey of 0000.
5. The N2 Bluetooth headset will now be ready to use with your mobile device.
Making a call
Dial a phone number on the mobile device's keypad.
Press the Send/Call key.
The call will automatically be transferred to the headset
by pressing the Talk button.
Using the headset
Redial the last number
Adjusting the volume
When not in a call, press the Talk button until you hear
the first beep.
During a call press the Volume up or Volume down button
to increase or decrease the volume. A beep will be heard
for each step.
Voice Dialling
Ensure the headset is on and paired with a mobile device.
Voice tags must have been recorded.
When not in a call, press and hold the Talk button for a second
until you hear the second beep, and say one of your recorded
voice tags.
The device will dial the number associated with the voice tag.
Transferring a call from the Headset to the device
Refer to your device's user manual.
Transferring a call from the device to the Headset
During a call press the Talk button.
How to change the housing
Ending a call
To end a call, press the Talk button during a call.
Answering a call
Once you hear an incoming call ring in the headset press
the Talk button.
You can pull out the existing
housing from the groove at the
top of the headset.
Then, fix the included different
colored housing into the headset
unit from the upper gap to the
side & lower gap in a row.
Limited Warranty
1. This product was produced under strict quality management
and inspection.
2. All defective units within the applicable Warranty period/s will be
repaired or replaced, in the case those faulty goods were handled
normally.
3. To get Warranty service, return the unit to the outlet from which
the unit was purchased.
4. Fill in this Warranty card and keep it.
5. Free of charge Warranty shall not apply to :
-Defects or damage resulting from use of the unit in other than its normal
and intended manner, eg, in excess of their maximum specifications
or operating instructions.
-Defects or damage from misuse, accident, neglect, improper testing,installation,
alteration or modification of any kind, or spillage of food or liquid.
Products name :
Model number :
Purchased date:
Warranty period : 1year
Outlet the unit was purchased :
Disclaimer
MODEL : N2
The headset described in this guide is approved to be compliant with the
Bluetooth Specification and its profiles.
is a trademark owned by Bluetooth SIG.
All brand names are the property of their respective owners.
FCC NOTICE TO USERS : FCC ID TNNN2
< NOTICE >
Section 15.19 Labelling requirements
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Section 15.21 Information to user
The changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Tel :
Customer
Address:
Name :
Tel :
IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any change
to the antenna or the device could result in the device exceeding the RF
exposure requirements and void user's authority to operate the device.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e1c163c9-2278-4c86-b7fa-2692a1f5df48
Producer                        : Acrobat Distiller 4.05 for Macintosh
Modify Date                     : 2005:10:04 12:41:54+09:00
Create Date                     : 2005:10:01 10:47:19Z
Metadata Date                   : 2005:10:04 12:41:54+09:00
Document ID                     : uuid:81614b42-9f20-4fb0-b0fe-2a9c6442389e
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools