Guangzhou Tendystar Telecom N2 Bluetoooth Headset User Manual
Guangzhou Tendystar Telecom Co.,Ltd Bluetoooth Headset Users Manual
Users Manual
User s Guide
Bluetooth Headset
TENDYSTAR
Bluetooth Headset
TENDYSTAR
MODEL : N2
Introduction ····································································2
Headset features ···························································3
Charging ········································································4
Wearing the headset ·····················································4
Using the headset
·To turn the headset on ····················································5
·Turning the headset off ···················································5
·Pairing the headset ·························································6
·Making a call ··································································6
·Redial the last number ····················································7
·Voice Dialling ··································································7
·Ending a call····································································7
·Answering a call ······························································7
·Adjusting the volume ·······················································8
·Transferring a call from the Headset to the device ············8
·Transferring a call from the device to the Headset ············8
·How to change the housing ·············································8
Limited Warranty·····························································9
Disclaimer·····································································10
Contents
Introduction
2
The N2 headset is a wireless headset based on Bluetooth
technology.
Bluetooth technology is a standard for wireless short distance
radio communications. Devices such as a headset and a mobile
phone or PDA, can communicate with each other without wires
over a distance of approximately 10 meters.
The N2 is a Bluetooth headset that supports two profiles:
The Headset profile and the Hands-Free profile.
It will work with any qualified Bluetooth device that supports
the Headset profile or the Hands-Free profile. The N2 headset can
be used with a qualified Bluetooth mobile phone or PDA*
(*) or another Bluetooth device supporting the Headset or Hands-Free profile.
This user guide focuses on the use of this Bluetooth headset with a Bluetooth
mobile phone.
Your N2 will allow you to receive and make a call,
adjust volume, without touching your mobile device.
Bluetooth is a trademark owned by Bluetooth SIG, Inc.
and is used by the manufacturer under its license term.
All brand names are the property of their respective owners.
Headset features Charging / Wearing the headset
3 4
In the package
N2 Charging cable Housings User’s guide
Volume down
Ear hook
Talk/Power button
Charging connector
Microphone
Volume up
When you receive your headset
the battery will not be completely
charged.
Before using the headset for the
first time you should fully charge
the battery with the supplied
charger.
Charging
You can put on the N2 Bluetooth
headset either on your left or right ear.
To change ear, hold the headset firmly
and pull the ear hook away from the post
on the back of the unit. Turn the ear hook
over and replace on the small post.
To wear the headset:
extend the ear hook then slip it over the top of your
ear, manoeuvre the speaker gently into your ear,
squeeze the ear hook closed until the headset is
held securely on your ear.
Wearing the headset
Using the headset
5 6
Press and hold the Talk button for 2~3 seconds, then the
indicator light flashes according to the status of headset.
(LED indication to check status.)
To turn the headset on
Press and hold the Talk button for 5 seconds, the indicator light
stops flashing.
Turning the headset off
Dial a phone number on the mobile device's keypad.
Press the Send/Call key.
The call will automatically be transferred to the headset
by pressing the Talk button.
Making a call
Before you use Bluetooth devices, some informations such as
Bluetooth address, pass code should be registered to both
devices you are going to use. This process is called pairing.
Once you have paired two devices, you don't need to do this
again until you want to use the headset with another device.
1. When you turn on, the headset is basically in waiting status.
Press and hold the Volume Up/Down buttons at the same time until the
headset light rapidly flashes.
2. Now, the headset is in pairing mode.
3. With your mobile device, search for headset as instructed in the device's
user guide.
4. Enter the headset passkey of 0000.
5. The N2 Bluetooth headset will now be ready to use with your mobile device.
Pairing the headset
I
LED indications
I
Headset Status LED indication
Pairable v-v-v-v-v-v-v-v-v
Not Connected ----v----v----v----v
Connected vvvv-vvvv-vvvv-
Audio Connected vvvvvvvvvvvvvvv
v:light on, -:light out
Using the headset
7 8
When not in a call, press the Talk button until you hear
the first beep.
Redial the last number
Ensure the headset is on and paired with a mobile device.
Voice tags must have been recorded.
When not in a call, press and hold the Talk button for a second
until you hear the second beep, and say one of your recorded
voice tags.
The device will dial the number associated with the voice tag.
Voice Dialling
To end a call, press the Talk button during a call.
Ending a call
Once you hear an incoming call ring in the headset press
the Talk button.
Answering a call
During a call press the Volume up or Volume down button
to increase or decrease the volume. A beep will be heard
for each step.
Adjusting the volume
Refer to your device's user manual.
Transferring a call from the Headset to the device
During a call press the Talk button.
Transferring a call from the device to the Headset
You can pull out the existing
housing from the groove at the
top of the headset.
Then, fix the included different
colored housing into the headset
unit from the upper gap to the
side & lower gap in a row.
How to change the housing
Limited Warranty Disclaimer
910
1. This product was produced under strict quality management
and inspection.
2. All defective units within the applicable Warranty period/s will be
repaired or replaced, in the case those faulty goods were handled
normally.
3. To get Warranty service, return the unit to the outlet from which
the unit was purchased.
4. Fill in this Warranty card and keep it.
5. Free of charge Warranty shall not apply to :
-Defects or damage resulting from use of the unit in other than its normal
and intended manner, eg, in excess of their maximum specifications
or operating instructions.
-Defects or damage from misuse, accident, neglect, improper testing,installation,
alteration or modification of any kind, or spillage of food or liquid.
Products name : Model number :
Purchased date: Warranty period : 1year
Outlet the unit was purchased :
Tel :
Customer Address:
Name :
Tel :
MODEL : N2
The headset described in this guide is approved to be compliant with the
Bluetooth Specification and its profiles.
is a trademark owned by Bluetooth SIG.
All brand names are the property of their respective owners.
FCC NOTICE TO USERS : FCC ID TNNN2
< NOTICE >
Section 15.19 Labelling requirements
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Section 15.21 Information to user
The changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any change
to the antenna or the device could result in the device exceeding the RF
exposure requirements and void user's authority to operate the device.