HAICOM Electronics HI-601VT GPS/GSM Tracking Device - Decoder Unit User Manual Manual 8
HAICOM Electronics Corp. GPS/GSM Tracking Device - Decoder Unit Manual 8
Contents
Manual 8
HI-601VT 27 Feature SIM interface Implementation • Supported SIM card: 3V • External SIM card reader has to be connected via interface connector Audio interfaces Two analog audio interfaces, one digital audio interface(DAI) Audio features Speech code modes: • Half Rate (ETS 06.20) • Full Rate (ETS 06.10) • Enhanced Full Rate (ETS 06.50 / 06.60 / 06.80) • Adaptive Multi Rate (AMR) Handsfree operation • Echo cancellation • Noise reduction Two serial interfaces: • 2.65V level, bi-directional bus for AT commands and ASC0,ASC1 data • ASC0 - full- featured 8-wire serial interface. Supports RTS0/CTS0 hardware handshake and software XON/XOFF flow control. Multiplex ability according to GSM 07.10 Multiplexer Protocol. • ASC1 - 4-wire serial interface. Supports RTS1/CTS1 hardware handshake and software XON/XOFF flow control. • Baud rate: 300bps… 230kbps on ASC0 and ASC1 • Autobauding (on ASC0 only) detects 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bps SIM Application SIM Application Toolkit Supports SAT class3, GSM 11.14 Toolkit Release 98, support of letter class ”c” Ringing tones Offers a choice of 7 different ringing tones / melodies, easily selectable with AT command Real time clock Implemented Timer function Programmable via AT command Support of TTY/CTM To benefit from TTY communication via GSM, CTM equipment can be connected to one of the three audio interfaces. Firmware upgrade Firmware upgradable over serial interface and SIM interface 27 28 HI-601VT Decoder How to Use: A. Connect the inclusive phone jack/PSII to mini1394 Y cable to the decoder: Mini1394 connector to the side of the decoder, phone jack to the phone jack outlet) B. As soon as turn on the power switch, the red LED light start blinking once per second. The updated coordinates will be sent out from “mini-1394 output” and “Bluetooth output” each second. PS. The data format is 4800, 8, N, 1 and computer will take the RS232 data from COM 1, COM2 or other com port. C. Start mapping software and activate the GPS signal receiving. The most update location (or the last location) will be shown on the mapping software. D. The orange LED light (GPS in 3D fixed) followed by the red light meaning the data is valid and is the real time location coordinate. The status also means that the car or the person should be in outdoor and the GPS receiver able to gets and lock more than 4 satellites. If the yellow light not lighted meaning the GPS data is not the real time coordinate (could be the old location coordinate) The status also means that the car or the person should be indoor and the GPS receiver unable to gets and lock more than 4 satellites. 28 HI-601VT 29 Decoder LED indicator Symbol LED Color Orange Bluetooth Red Green Stay on Blinking GPS data valid (3D fixed) GPS data not valid Bluetooth Connected Bluetooth no connected Decoding (4 seconds interval) Receiving data 29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2007:07:24 17:23:49+08:00 Create Date : 2007:07:24 17:23:41+08:00 Creator : Adobe Illustrator 10.0.3 Producer : Adobe PDF library 5.00 For : aa, aa Title : h26.pdf Bounding Box : -9 -9 293 434 Creator Version : 10 Container Version : 9 Page Count : 4 Mod Date : 2007:07:24 17:23:49+08:00 Creation Date : 2007:07:24 17:23:41+08:00 Metadata Date : 2007:07:24 17:23:49+08:00EXIF Metadata provided by EXIF.tools