HANWAY TECHNOLOGY QV50L VENTILATION FAN User Manual

HANWAY TECHNOLOGY CO., LTD. VENTILATION FAN Users Manual

USERS MANUAL

Quiet Ventilation Fan/Light/NightlightREAD AND SAVE THESE INSTRUCTIONSGENERAL SAFETY INFORMATION................................................ ................. ..........2......... ..................DESCRIPTION...................................................................................................................................3COMPONENT PARTS.........................................................................................................................3DIMENSIONS....................................................................................................................................4SPECIFICATIONS..............................................................................................................................4INSTALLATION..................................................................................................................................5CLEANING & MAINTENANCE..............................................................................................................7TROUBLE SHOOTING GUIDE.............................................................................................................7SERVICE PARTS................................................................................................................................8WARRANTY......................................................................................................................................9Models QV50L/QV80L/QV110L/QV150LINSTALLATION INSTRUCTIONSThe Honeywell trademark is used under license from Honeywell Intellectual Properties Inc.by Lonon Industry Company, Ltd.Honeywell International Inc. makes no representations or warranties with respect to this product.TABLE OF CONTENTSQuiet Decorative VentilationFan/Light/NightlightModels QDV70L/QDV80L/QDV90L/QDV110L/QDV130L/QDV150L
Page 2Fig.AWARNING:TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THEFOLLOWING:1. Use this unit only in the manner intended by . If you have questions, please contactat the address or telephone number listed in the warranty.2. Before servicing or cleaning unit, switch the power off at service panel and lock the servicedisconnecting means to prevent power from being switched on accidentally. When the servicedisconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, tothe service panel.3. Installation work and electrical wiring must be done by a qualified person(s) in accordance with allapplicable codes and standards, including fire-rated construction codes and standards.Lonon USA, LLCLonon USA, LLC4. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuelburning equipment to prevent back drafting. Follow the heating equipment manufacturer's guideline andsafety standards, such as those published by the National Fire Protection Association (NFPA) and theAmerican Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the localcode authorities.5. When cutting or drilling into wall or ceiling, make sure not to damage electrical wiring and other hiddenutilities.6. Ducted fans must always be vented to the outdoors.7. NEVER place a switch where it can be reached from a tub or shower.8. Please note that solid state controls may cause harmonic distortion that can cause motor hummingnoise.9. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.10. Not to be in a ceiling thermally insulated to a value greater than R40.11. Fluorescent models only: Do not use a dimmer switch to control the light of this unit.12. Motor and grille assembly must be installed with housing assembly that are marked (on their cartons) toindicate the suitability with this model. Other housing assembly cannot be substituted.13. To reduce the risk of fire use only these 18 watt fluorescent lamps and 4 watt maximum type Cincandescent lamp nightlight.1. Do not install this ventilating fan where air temperature may exceed 104 F (40 C).2. Make sure that the electric service supply voltage is 120V, 60Hz.3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and the OccupationSafety and Health Act (OSHA).4. Always disconnect the power source before working on or near the fan, motor or junction box or light fixture.5. Protect the power cord from sharp edges, oil, grease, hot surfaces, chemicals or other objects.6. Do not kink the power cord.7. This unit is approved for use over a bathtub or shower when installed in a GFCI protected branch circuit.8. This unit must be grounded.9. This unit is U.L. Listed. Type I.C. Inherently protected.10. These models are UL listed for tub and shower enclosures.11. Provide suction parts with proper ventilation.12. Do not install the unit where ducts are configured as shown in Fig.A.GENERAL SAFETY INFORMATION
1. For general ventilating use only.2. This product is designed for ceiling installation only. Thisproduct is designed for installation in ceilings up to a 12/12pitch. Ductwork must point up. DO NOT MOUNT THISPRODUCT ON A WALL.3. The light fixture assembly must be mounted to the fanhousing assembly included with this product. Do not mountthe fight fixture assembly to a wiring outlet box.4. To avoid motor bearing damage and noisy and / orunbalanced impellers, keep drywall spray, constructiondust, etc. off power unit.5. Please read specification label on product for furtherinformation and requirements.6. Not for use in cooking area (Fig. B).Do not use to exhausthazardous or explosive materials and vapors.CAUTION:Fig.B(Cooking area)Do not install above orinside this areaCookingequipmentFloor4545Page 3DESCRIPTIONThank you for selecting this high quantity Honeywell ventilation fan. Honeywell ventilation fans were designed withyour comfort in mind. With many different features, Honeywell fans fit your needs whether your bathroom is big orsmall, needs a light, no light or even a nightlight, Honeywell fans have the features you need.Honeywell ceiling mounted ventilation fans use a high-capacity sirocco fan driven by a capacitor motor. The siroccofan reduces the noise level.Honeywell ventilation fans incorporate a thermal cut off for safety.The grille unit can be quickly detached from the main unit for cleaning.A damper for preventing air backdraft is incorporated into every fan.The light unit is an energy efficient lighting device which uses two 18W compact fluorescent lamps.The motor is designed to have an extended service life with reduced energy consumption.GENERAL SAFETY INFORMATION ( Continued )COMPONENT PARTS18 Wfluorescent lamp2Part namePicturePart namePictureQuantity QuantityGrille 1821Suspensionbracket A(12.6inches/320mm)Suspensionbracket B(9.5inches/240mm)Suspensionbracket C(6.3inches/160mm)QV110L/150Lnot suppliedSuspensionbracket D(2.95inches/75mm)QV110L/150Lnot suppliedSuspensionbracket E(5.3inches/135mm)QV50L/80Lnot supplied1111Screw AST4X30Screw BM4X104 WNight lampGlass sub-1( glass grille )Screw EM5X20Grille sub-21411
QDV70L 120V/60Hz21.036.0 4.0 70 <0.3 4QDV80L 120V/60Hz 23.0 36.0 4.0 80 0.5 4QDV90L 120V/60Hz 24.0 36.0 4.0 90 0.5 4QDV110L 120V/60Hz32.036.0 4.0 110 0.3 6QDV130L 120V/60Hz 35.0 36.0 4.0 130 0.6 6QDV150L 120V/60Hz 41.0 36.0 4.0 150 1.0 615.3215.3215.3219.2919.2919.29Page 4SPECIFICATIONS*At 0.0" Static pressure (Pa).Specifications are based on HVI standard.Power consumption*(W)QV50L 120V/60Hz17.036.0 4.0 50 <0.3 4QV80L 120V/60Hz 21.0 36.0 4.0 80 0.3 4QV110L 120V/60Hz33.036.0 4.0 110 0.9 6QV150L 120V/60Hz 39.0 36.0 4.0 150 0.9 6DuctDiameter(inch)Weight(lb.)Noise(sone)AirMovement0.1" WG(CFM)Light UnitLight Night LightFanUnitPowerSupplyModelNo.9.99.912.512.5254-584mmGHIJBACDEFDIMENSIONSCDEABFGHIJ254-584mmModel No. ABCDEQV50LQV80LQV90LQV110LQV130LQV150L10 9/16 10 5 1/2 4 12 3/16"""" "FG3 1/2 ½11 7/16 6 3/8 613 3/4¾12 5/16 """""4 5/16""12 3/16"3 1/83 1/8HI4 1/84 1/8""""J7 7/87 7/8 ½""13 3/4¾"QDV70LQDV80LQDV90LQDV110LQDV130LQDV150L10 9/16 10 5 1/2 4 12 3/16"""" " 3 1/2 ½11 7/16 6 3/8 613 3/4¾12 5/16 """""4 5/16""12 3/16"3 1/83 1/84 1/84 1/8""""7 7/87 7/8 ½""13 3/4¾"QV90L 120V/60Hz 24.0 36.0 4.0 90 0.5 49.9QV130L 120V/60Hz 36.0 36.0 4.0 130 0.8 612.5
Wiring DiagramLight unitElectricBallastNight lamp18W Lamp18W LampFan unitMotorCondenserBlueWhiteBlackEarth GroundWiring boxBlackWhiteBlackWhiteWhiteBlackGreenGreen terminalEarth GroundBlackWhiteBlackWhiteWhiteBlackGreenEarth GroundEarth GroundPower supply(120V~60Hz)Power supply(120V~60Hz)Power supply(120V~60Hz)S1. Select the suspension bracket and insert them into the housing according to the table-1 as below.Page 5S4. Remove the wiring cover and the knockout hole, make the electrical cable through the knockout hole, andconnect the house power wires to wires of the product according to the wiring diagram. Then secure the circularduct ( 4 inches duct for QV50L/80L/90L QDV70L/80L/90L and 6 inches duct for QV110L//130L/150LQDV110L/130L/150L ) with duct tape (Fig.6).S2. Choose the location for your fan in the ceiling. For best possible performance, use the shortest possible duct runand minimum number of elbows. Mark the keyhole slot on both suspension brackets and keep the distance B forthe thickness of the ceiling board (Fig.3).S3. Set housing aside and drive the screw A (ST4 30) partially into joists at the top of both keyhole marks (Fig.4).Hang housing from the screw A and drive the screw A tight. To ensure a noise-free mount, drive other screw Athrough the round holes of suspension brackets. Secure the suspension brackets to the housing by screw B(M4 10) (Fig.5).Circular ductDuct tapeWiring coverKnockout holeHousingFig.6Electrical cableINSTALLATION ( The housing is in the middle of joists )Fig.1SuspensionBracket BSuspensionBracket CSuspensionBracket DHousingFig.2SuspensionBracket ASuspensionBracket BSuspension Bracket C(for models QV50L/80L/90L)(for models QDV70L/80L/90L)Suspension Bracket E(for models QV110L/130L/150L)(for models QDV110l/130l/150l)HousingFig.54-Screw A(ST4 30)2-Screw B(M4 10)2-Screw A(ST4 30)HousingScrew A(ST4 30)Fig.4JoistsAtable-1The joists center distance A Insert the suspension bracket method Remark16 inches19.2 inches or 24 inchesRefer to Fig.1 insertRefer to Fig.2 insertThis method is not fit theproducts QV110L/130L/150LQDV110L/130L/150LKeyhole slotBFig.3Keyhole slot
INSTALLATION ( The housing is in the middle of joists )( Continued )S6. For models QV50L/80L/90L/110L/130L/150L, insert the grille springs into the slots of the casing and mount thegrille unit. Finish the installation work (Fig.9.1).For models QDV70L/80L/90L/110L/130L/150L, secure the grille sub-2 to the housing by screw E (M5 20). Insertthe sliding shaft to the grille sub-2, then turn the grille sub-1 along the arrow mark and finish the installation work(Fig.9.2).S2. Choose the location for your fan in the ceiling. For best possible performance, use the shortest possible duct runand minimum number of elbows. Lock the flange of the product and the suspension bracket A tightly to the I-joistby screw A (ST4 30) (Fig.11).S1. Insert the suspension bracket A into the housing and secure it to housing by screw B (M4 10) according to thedistance C in table-2 (Fig.10).S3. Please follow S4 to S6 of installation, ( page 5, page 6 ), to finish the installation work.INSTALLATION ( I-joists mounting )Table-2C1C2C3C44 kinds of I-joistinches(mm)C1 9/16 (14.3)CC2 11/16 (17.5)C3 31/32 (24.6)C4 1 17//32 (38.9)The suspension bracket A can accommodatedifferent kinds of I-joist.Page 6S5. Finish the ceiling work, ceiling hole should be kept for the product (Fig.7). Then insert the 18 watt fluorescentlamps into the lighting unit and screw the 4 watt nightlight into the lighting unit (Fig.8).Fig.9.1Ceiling boardGrille unitCeiling boardGrille springSlotFig.8Ceiling boardFluorescent LampHousingLighting HousingFig.7Ceiling boardLighting unitHousingFig.10Housing2-Screw B(M4 10)Suspension bracket AFig.11HousingI-joist4-Screw A(ST4 30)Fig.9.2Grille sub-2Housing4-Screw E(M5 20Ceiling board Grille sub-1Grille sub-2Sliding shaftSliding shaftTurning way of sliding shaft
Page 7CLEANING & MAINTENANCEWARNINGCAUTIONCLEANINGMAINTENANCEREPLACEMENT OF LAMP1. Disconnect power source before working on unit.2. The lamp's glass is fragile. Please handle with care. To remove lamp, grasp at base and move back and force toloosen.3. Do not pull hard on the lamp or you may break the glass.4. 4W night lamp has threaded base. Remove by turning counterclockwise.1. Never use petrol, benzene, thinner or any other such chemicals for cleaning the ventilating fan.2. Do not allow water to enter motor.3. Metal and electrical parts should never be immersed in water.4. Do not immerse resin parts in water over 140 F (60 C).5. Allow bulb and lamps to cool before replacing.Squeeze grill springs and pull grille down carefully. Use non-abrasive kitchen detergent wash, and wipe grille dry withnew cloth.Remove bulbs, if necessary. Remove dust and dirt on fan body using vacuum cleaner. Using a cloth dampened withmild dish soap, remove any dirt from fan body. Wipe dry with new cloth.Replace bulbs and grille.The motor is permanently lubricated and never needs oiling. If the motor bearings are making excessive or unusualnoises, replace the motor with the exact service motor. You must replace the impeller at the same time.Remove grille. Disconnect the connectors of light unit from fan unit. Change the 18W fluorescent bulb or the 4Wincandescent lamp, connect the connectors and replace the grille.TROUBLE SHOOTING GUIDEProblem:Solution:Problem:Solution:Problem:Solution:Fan does not come on.Honeywell ventilation fans are extremely quiet. To confirm that the fan is running, place your hand near the ventsto feel the air movement.Turn power on, replace fuse, or reset breaker.Check all plug connections to be sure they are secure.Check the wiring to make sure it matches the wiring diagram.Light does not come on.Replace the light bulb with a new bulb.Turn power on, replace fuse, or reset breaker.Check all plug connections to be sure they are secure.Check the wiring to make sure it matches the wiring diagram.Fan is noisy.Check and tighten all fasteners.Check the flapper to make sure it moves freely.
SERVICE PARTS (FOR QV50L/80L/90L/110L/130L/150L)Page 8202122232425262728293078 4569101112 3 213114 15 16 17 18 19363531 32 33 3437383940414243444546No. Part name No. Part nameDamperCondenserAdaptor setting screwWiring box setting screwWiring boxMotor setting screwMotorMotor support281234562425262729AdaptorCasing setting screwCondenser boxHousingBallast box supportLampholder setting screwBallast box support setting screwBracket cover A setting screwSuspension bracket ACondenser box setting screwFluorescent lampNight lamp347891011123031323335Bracket cover ALampholderLampholder cover setting screwSuspension bracket BCasing support setting screwBallast box cover setting screw ACasing supportBracket cover BLampholder coverBallast boxBallast1314151636373839Wiring coverBracket cover B setting screwSpring hookWiring cover setting screwCasingBlower wheel setting nutBallast box coverBallast box cover setting screw BSpring hook setting screw441718192021224041424345Suspension bracket CGrille springGrilleBlower wheel setting washerBlower wheel Lamper cover23 46
SERVICE PARTS (FOR QDV70L/80L/90L/110L/130L/150L)*These instructions may be printed in English ("the English version") and one or more other languages ("other versions"), inwhich case the English version shall prevail if there is any inconsistency between the English version and any one or more ofthe other versions.202122232425262728293078 4569101112 3 213114 15 16 17 18 19363531 32 33 34373839404142434445484647No. Part name No. Part nameDamperCasing setting screwAdaptor setting screwWiring box setting screwWiring boxMotorMotor supportCondenser291234562526272830AdaptorCondenser boxCondenser box setting screwHousingBallast box supportLampholderBallast box support setting screwBracket cover A setting screwSuspension bracket AFluorescent lampNight lampLampholder setting screw357891011123132333436Bracket cover ALampholder cover setting screwLampholder coverSuspension bracket BCasing support setting screwBallast box coverCasing supportBracket cover BBallast boxBallastBallast box cover setting screw A1314151637383940Wiring coverBracket cover B setting screwSliding shaftWiring cover setting screwCasingBlower wheel setting nutBallast box cover setting screw BGrille sub-2Nut (M5)451718192021224142434446Suspension bracket CNut (M5)BoltBlower wheel setting washerBlower wheel Glass grille hook23 47Motor setting screw Glass grille24 48Page 9
Page 10WARRANTYLONON USA, LLCLIMITED WARRANTYProduct Name: Model Number:Date of purchase: Dealer:Date of installation: Builder/ Installer:Warranty Period (from date of original purchase) ("Warranty Period"): Five (5) years for the motor; One (1) year forother parts.LIMITED WARRANTY.THIS WARRANTYSHALL BE VALID ONLY IF THE PRODUCT IS PURCHASED AND INSTALLED IN THE UNITED STATES.Lonon USA, LLC ("LONON") gives this limited warranty ("this Warranty") to the originalpurchaser of the Product ("Buyer"), subject to the following terms: LONON warrants that the Product will be freefrom original defects in materials and workmanship for the Warranty Period, PROVIDED (i) that the Product has beenproperly stored, installed, serviced, maintained and operated; (ii) that the Product has not been altered or repaired inany way which, in LONON's reasonable judgment, will affect its performance or reliability; and (iii) that the Producthas not been improperly installed or subjected to misuse, negligence, or accident, or incorrectly used in combinationwith other articles. Save where provided otherwise in this Warranty, Buyer assumes all risks and liability for resultsof use of the Product. Where applicable, warranties on purchased parts are limited to the terms of the warrantiesextended by LONON's supplier(s). Without prejudice to the limitations and exclusions below,WARRANTY SERVICE. All claims under this Warranty shall be made in writing and delivered to LONON at theaddress set out below within 15 days after discovery of the defect and prior to the expiration of the Warranty Period.Buyer shall be barred from any remedy if Buyer fails to make such claim within such period. Within 30 days afterreceipt of a timely claim, LONON shall have the option either to inspect the Product while in Buyer's possession or torequest Buyer to return the Product to LONON at Buyer's expense for inspection by LONON. Subject to the terms ofthis Warranty, LONON will, during the Warranty Period, at its option replace or repair, free of charge, the Product orpart thereof which LONON determines is defective under normal use and maintenance.This Warranty does not cover and LONON is not responsible for : (i) normal maintenance and service; (ii) any Productwhich has been subjected to misuse, improper maintenance or modification, neglect, electrical current fluctuations,negligence, accident, improper or faulty operation or installation or installation contrary to the installationinstructions, use of parts or supplies other than LONON's that cause damage to the Product, defacement, alteration,or removal of a product serial number; (iii) the cost of removal of the defective Product or part, damages due toremoval, or any expenses incurred in shipping the defective Product or part to or from LONON's service centre, orthe installation of the repaired or replacement product or part; (iv) any glass component, light bulb, fluorescent lamp,starter, tube, filter, duct, roof cap, wall cap or other ducting accessories even where the Product is equipped with anyof the same.Subject to the above warranty, to the maximum extent permitted by applicable law: (i) LONON and its suppliersprovide the Product as is and hereby disclaim all other warranties and conditions whether express implied orstatutory, including without limitation implied warranties or conditions of merchantability and of fitness for aparticular purpose, and any responsibility for any loss of revenues or profits, inconvenience, expense for substituteequipment or service, storage charges, or loss or corruption of data; (ii) implied warranties, when applicable, shallcommence upon the same date as the express warranty provided above, and shall, except for warranties of title,extend only for the duration of the express warranty above; (iii) LONON assumes no liability on account of anyrecommendations, opinions or advise as to the choice, installation or use of the Product, and any suchrecommendations, opinions or advice given are accepted at the original purchaser's own risk and shall notconstitute any warranty or guarantee concerning any matter; (iv) in no event shall LONON and its suppliers be liablefor any special, incidental, punitive, indirect, or consequential damages whatsoever arising out of or in any wayrelated to the use of or inability to use the Product for whatever reason and based on whatever cause of action;
WARRANTY ( Continued ) (v) the entire liability of LONON and its suppliers in relation to the manufacture and supply of the Product is limited to the amount actually paid by the original purchaser for the Product. Damages are limited to the purchase price of the Product. This Warranty gives the Buyer specific legal rights. Some states do not allow limitation on how long an implied warranty lasts, or exclusion of or limitation on incidental or consequential damages. The extent to which the above limitations and exclusions are valid may vary from state to state. No agent, dealer, employee or other person is authorized to give any other warranties or assume any other liability on LONON's behalf in connection with the Product except in writing signed by an authorized officer of LONON. Notwithstanding any past practice or dealings or any custom of the trade, the supply of the Product does not include the provision of any technical advice or system design, which may be provided at LONON's sole option and subject to additional charges. This Warranty may be printed in English ("the English version") and one or more other languages ("other versions"), in which case the English version shall prevail if there is any inconsistency between the English version and any one or more of the other versions. FOR ASSISTANCE: PLEASE CONTACT Lonon USA, LLC Customer Service Centre: 4320 Winfield Road, Suite 200 Warrenville, IL 60555 Opening hours: Mon. - Fri. (except public holidays): 8:00 am to 3:30 pm Toll free service hotline: 1-888-566-6687 IMPORTANT: The original invoice for the purchase of the Product together with this warranty card must be presented in order to quality for service under this Warranty. FCC NOTE The manufacture is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30MHz. Page 11
Version:A Revision Data: 12/14/2005Description: Electronic ballast for compact fluorescent Lamp (2)T4quad 4pin 13W or (2) T5 linear 13W/14W/28W• Line Voltage : 120Vac, 60Hz • Rapid Start• Series Lamp Connection WS-3Input Power CrestVolts Freq-Hz Watts* Factor Factor293030130*ANSI measured wattage,25℃ ambient,benchtop,lamps base up ; Enclosed fixture, wattage may change depending on fixture type.Application and Performance Specification Information Subject to Change without Notification.Performance: Safety:• Meets ANSI Standard C82.11-1993 • No PCB's• Meets ANSI Standard C62.41-1991 • UL listed (Class P)• Meets UL 935 • UL # 221323• Meets FCC Part 18 (Class B) for EMI• Operating Frequency Range: 45-55 kHz• Abnormal Protection Circuit • End of lamp life protection Circuit • Auto-Reset Shutdown Circuit - lamp(s) should be replaced at end of lamp life- Lamp relights upon insertion in socketApplication: Physical Parameters• Minimum Starting Temperature: 5° F (-15° C) Case: CM-31(#90-5B)• Maximum Ambient Temperature: 122° F(50° C) Overall Length(L): 3.86"(99mm)• Maximum Case Temperature (@ tc): 158° F(70° C) Width(W): 2"(52mm)• Sound Rated: A Mounting(M): 3.5"(90mm)Height(H): 1.00"(25.4mm)Weight: 0.55bs(0.25kg)Qty/Carton: 30Color: BlackCan Material: MetalBlack 320mmWire length: White 300mm (±25.4mm) Blue 240mm*2Red 240mm*2Yellow 250mm*2Install in accordance withthe National Electrical Code Ballast must be grounded.FCC NOTE:The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or othercritical navigation or communication equipment operating between 0.450-30MHz.Warranty:Universal Lighting China warrants to the purchaser that each electronic ballast will be free from defects in material orworkmanship for a period of 3 years from date of manufacture when properly installed and under normal conditions of use. Call 8621-64808118*218,128 for technical assistance.○○○○☆☆ Manufactured in China0.44CBT-213L-120S 120 60 T5 linear 13W <1.7 #90-5BT5 linear 14WT5 linear 28W0.440.440.44213W/6T4/Q/G24q-1(Quad 4pin/PL-C 13W)0.56CBT-213L-120SAPPLICATION and PERFORMANCE SPECIFICATIONLine Case ULC #No.oflampsModel LampType** Line AmpsNominalBALLASTRedBlueWhiteBlack

Navigation menu