HBC radiomatic P10004 Crane Remote Control Transmitter User Manual 1521 statement page

HBC-radiomatic GmbH Crane Remote Control Transmitter 1521 statement page

Contents

1521 statement page

Operating InstructionsRadio Transmitter patrol ( Industrial Version )BEPATRIUS-L.DOC [ Word 97 ] FL Page 6 / 14HBC-radiomatic, Inc. , Cincinnati , Ohio 45242 , USAHBC-radiomatic reserves the right to alter or amend the above information without any notice. 2001-09-13Radio Remote Control System2.2 Safety Notes Regarding Operation➪ Warning to our Users :In accordance to the rules and regulations of the FCC, any changes ormodifications made to our transmitter or receiver by you without the expresswritten consent of HBC-radiomatic, Inc. could void your authority to operate theequipment under FCC’s rule 15.21 !➪ Before using the radio control system for the first time, read these operatinginstructions completely and carefully.➪ In case of a defect, an emergency situation and whenever a malfunction occurs inthe working area of the radio system, it is required to de-energize the radioequipment immediately until the cause of the fault has been located and repaired !− Switch OFF the transmitter via the EMERGENCY-STOP pushbutton.− Disconnect the connecting cable from the receiver.➪ During breaks and at the end of work, disconnect the transmitter by means of thekey switch or the EMERGENCY-STOP pushbutton.➪ Be cautious when working with the radio control. – When using the radio control,choose a stable location from which you can see the entire working area.➪ Usage of radio remote control systems outside of manufacturer’s guidelines(section 3) may result in invalidity of the guarantee.2.3 Safety Notes when Operating the Transmitter➪ Before you start working, always verify the operation of the EMERGENCY-STOPpushbutton.➪ It is not allowed to leave a connected transmitter and not supervise it.➪ In case of an emergency and in case of all sorts of problems in the working rangeof the machinery or in case of a technical failure of the radio control, you muststop the crane or machine by pressing the EMERGENCY-STOP pushbutton !➪ During breaks and at the end of work, disconnect the transmitter by means of the"ON / OFF" toggle switch.➪ The operation of the transmitter is permissible only with the carrying set includedwith the transmitter (possibility of mixing up the controls) !

Navigation menu