HENAN ESHOW ELECTRONIC COMMERCE RETEVISRT36 Walkie Talkie User Manual

HENAN ESHOW ELECTRONIC COMMERCE CO., LTD Walkie Talkie

UserManual.wiki >

HENAN ESHOW ELECTRONIC COMMERCE >

RETEVISRT36 User Manual

User Manual

RT36

1.Antenna12.PTT13.Lamp Key2.Volume Up3.Volume Down9.MENU10.Power Button11.Speaker14.Vox15.Power display16.Lock17.Lamp4.Channel Display 5.CTCSS/DCS 6.TX/RX Icon7.Volume8.MicrophoneNumber01

Instructions for use Specific recommendations:1.To avoid the risk of burns, do not use the device if the antenna is damaged in any way.2.Do not use the device in a potentially explosive environment.3.Switch off the device if on an airlane or in a hospital.4.Never use the device in close proximity to a radio to avoid interference.5.Remove the batteries if the device is not in use for an extended period of time. Never mix used and new batteries.6.Put the transmitter and antenna at least 5 cm from your face.7.Clean the device with a damp cloth. Do not use of cleaning agents and solvents.8.Do not modify the device in any way. If the device is damaged, Please make it checked by a qualified professional.9.The device cannot be used to contact the emergency services. 02

Unpacking and checking equipmentWelcome to use two-way radio. Carefully unpack the radio. We recommend you check the listed in the following table before discarding the package. If any item is missing, please contact us immediately.2 x Belt clip1 x Micro-USBAAAAAAAAAAAAAAAAAA 2 x two-way radioUser s Manual'1 x User's ManualSupplied accessories:6 x (AAA) NiMH rechargeable03

AAAAAAAAAAAAAAAAAA04

1.Requires 6 AAA batteries included. Batteries are to be changed by an adult. 2.Non-rechargeable batteries must be removed from toy before being recharged and rechargeable batteries shoud be charged under adult supervision. 3.Do not mix alkaline, standard(carbon zinc),or rechargeable(nickel cadmium) batteries. Do not mix used and new batteries together. Only batteries of the recommended type or of a similar type should be used. 4.Batteries must be inserted according to the correct polarity.Remove batteries from toy when storing for an extended period of time or if batteries are exhausted. 5.The supply terminals must not be short-circuited.1.Battery Precautions05

2.Product description1. 2. Automatic squelch3. Call tone (10 sets of call sounds to select )4. Keyboard lock (long press key to lock the keyboard misuse)5.LED flashlight6.7 kinds of LCD display7. Low battery alarm8.DCS 14,14 channels, each channel a digital coded squelch9. Vox function Civilian handheld license-free two-way radio........3.Functional operation3.1 To turn the devices on or off, press the on/off button for 3 seconds, there will be a BEEP sound to confirm.Turning the device on/off 10. Memory and restore factory settings function11.Communication distance, according to the actual situation around the mountains, trees, tall buildings and other judgments Intercom communication distance.06

3.3 Function option switchAfter pressing the power button to enter the menu settings:1.Changing the channel: press the button once, then change the channel with and . Press PTT to confirm .The two devices must use the same channel2.VOX:Press for VOX (voice) to select, close and 5 level options.3.P ▲ ▼.the button twice,ress the button three times, then choose one of the ten call tones and press PTT to confirm.4.Press the button three times, return to standby.3.4 Vox functionPress the button twice, for VOX (voice) to select, close and 5 level options.Note: The volume level (8) is displayed on the screen. 3.2 Adjusting the volumeTo increase the volume, press the Up adjustor button ▲and press the Down▼button to decrease volume.07

Note: 1. There will be a slight delay between starting speech and radio transmission.2. PTT auto-off when the voice-activated launch switch is turned on does not need to be pressed by PTT3. After the end of the speech two seconds after the launch automatically..5 = High sensitivity under low background noise.4 = Medium High Sensitivity Under Low Background Noise Use.3 = Sensitivity for most applications2 = Medium low sensitivity for high background noise.1 = low sensitivity for high background noise.3.5 CALL tone selectionPress the button three times, then choose one of the ten call tones and press PTT to confirm. a total of 10 kinds of CALL music, press the power button to launch. 3.6 Battery Charge LevelThe battery charge level is indicated by the number of square spresent inside the battery icon on the LCD screen. 08

Battery FullBattery 2/3 chargedBattery 1/3 chargedBattery emptyWhen the battery power is low, the battery icon will flash and there will be a beep indicating that the batteries need to be replaced or recharged .3.7 Memory functionThere is a memory function (including the on / off status) when the machine is turned off or off, and there is no need to reset the channel3.8 Restore factory settingsIn the shutdown state, press the key and the button at the same time, all settings are restored to factory settings..3.9 How to communicate with each otherMutual communication must be set to the same channel and sub-audio, the need to press the PTT call key,Please keep the mouth and distance of about 5 cm, two-way radio09

Europe4 Channel and frequency (MHz).DCS.Channel Frequency DCS Number 1 446.00625 N114 53 2 446.01875 N131 57 3 446.03125 N132 58 4 446.04375 N165 65 5 446.05625 N226 70 6 446.06875 N306 79 7 446.08125 N371 88 8 446.09375 N503 99 immediately after the release of the PTT button to release. Let the other party at any time call, note the same frequency for the radio, so when the letter can not write, Send no letter when the letter, in the launch of the signal when they can not hear each other to speak, the other side speaking time can not talk with each other, if forced to speak according to PTT, the other party will say can not hear, they said the other side can not hear.When the PTT is launched, the LCD has a transmission indicator ; the LCD is signed at reception.10

AmericaChannel Frequency DCS Number 1 462.5625 N43 44 2 462.5875 N65 48 3 462.6125 N116 55 4 462.6375 N205 68 5 462.6625 N261 75 6 462.6875 N265 77 7 462.7125 N271 78 8 467.5625 N306 79 9 467.5875 N311 80 10 467.6125 N331 82 11 467.6375 N365 87 12 467.6625 N431 93 13 467.6875 N466 98 14 467.7125 N503 99 11

Note:1.This warranty card is only applicable to two-way radio of the above-listed model and serial number.2.The warranty card is an important document for the end-user to enjoy warranty service, please keep it well.3.The warranty card shall be filled and chopped by thedealer ,or it is invalid.Name GenderAdd and postal code:12

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each product are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal. To maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to comply with the FCC RF exposure requirements, the antenna installation must comply with following: Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits. Your wireless hand-held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push-to-Talk (PTT) button is pressed. The device is authorized to operate at a duty factor not to exceed 50%.