HENAN ESHOW ELECTRONIC COMMERCE RETEVISRT36 Walkie Talkie User Manual
HENAN ESHOW ELECTRONIC COMMERCE CO., LTD Walkie Talkie
User Manual
RT36 1.Antenna 11.Speaker 2.Volume Up 12.PTT 13.Lamp Key 14.Vox 15.Power display 3.Volume Down 4.Channel Display 5.CTCSS/DCS Number 6.TX/RX Icon 7.Volume 16.Lock 17.Lamp 8.Microphone 9.MENU 10.Power Button 01 Instructions for use Specific recommendations: 1.To avoid the risk of burns, do not use the device if the antenna is damaged in any way. 2.Do not use the device in a potentially explosive environment. 3.Switch off the device if on an airlane or in a hospital. 4.Never use the device in close proximity to a radio to avoid interference. 5.Remove the batteries if the device is not in use for an extended period of time. Never mix used and new batteries. 6.Put the transmitter and antenna at least 5 cm from your face. 7.Clean the device with a damp cloth. Do not use of cleaning agents and solvents. 8.Do not modify the device in any way. If the device is damaged, Please make it checked by a qualified professional. 9.The device cannot be used to contact the emergency services. 02 Unpacking and checking equipment Welcome to use two-way radio. Carefully unpack the radio. We recommend you check the listed in the following table before discarding the package. If any item is missing, please contact us immediately. Supplied accessories: 1 x Micro-USB AAA AA A 2 x two-way radio 2 x Belt clip User ' s Manual AA A 6 x (AAA) NiMH rechargeable 1 x User's Manual 03 AA A 04 AAA AA A 1.Battery Precautions 1.Requires 6 AAA batteries included. Batteries are to be changed by an adult. 2.Non-rechargeable batteries must be removed from toy before being recharged and rechargeable batteries shoud be charged under adult supervision. 3.Do not mix alkaline, standard(carbon zinc),or rechargeable(nickel cadmium) batteries. Do not mix used and new batteries together. Only batteries of the recommended type or of a similar type should be used. 4.Batteries must be inserted according to the correct polarity.Remove batteries from toy when storing for an extended period of time or if batteries are exhausted. 5.The supply terminals must not be short-circuited. 05 2.Product description 1. Civilian handheld license-free two-way radio. 2. Automatic squelch . 3. Call tone (10 sets of call sounds to select ) 4. Keyboard lock (long press key to lock the keyboard misuse) . 5.LED flashlight . 6.7 kinds of LCD display. 7. Low battery alarm . 8.DCS 14,14 channels, each channel a digital coded squelch . 9. Vox function . 10. Memory and restore factory settings function 11.Communication distance, according to the actual situation around the mountains, trees, tall buildings and other judgments Intercom communication distance. 3.Functional operation 3.1 Turning the device on/off To turn the devices on or off, press the on/off button for 3 seconds, there will be a BEEP sound to confirm. 06 3.2 Adjusting the volume To increase the volume, press the Up adjustor button▲and press the Down▼button to decrease volume. Note: The volume level (8) is displayed on the screen. 3.3 Function option switch After pressing the power button to enter the menu settings: 1.Changing the channel: press the button once, then change the channel with▲and ▼. Press PTT to confirm .The two devices must use the same channel . 2.VOX:Press the button twice, for VOX (voice) to select, close and 5 level options. 3.P ress the button three times, then choose one of the ten call tones and press PTT to confirm. 4.Press the button three times, return to standby. 3.4 Vox function Press the button twice, for VOX (voice) to select, close and 5 level options. 07 5 = High sensitivity under low background noise. 4 = Medium High Sensitivity Under Low Background Noise Use. 3 = Sensitivity for most applications 2 = Medium low sensitivity for high background noise. 1 = low sensitivity for high background noise. Note: 1. There will be a slight delay between starting speech and radio transmission. 2. PTT auto-off when the voice-activated launch switch is turned on does not need to be pressed by PTT. 3. After the end of the speech two seconds after the launch automatically. 3.5 CALL tone selection Press the button three times, then choose one of the ten call tones and press PTT to confirm. a total of 10 kinds of CALL music, press the power button to launch. 3.6 Battery Charge Level The battery charge level is indicated by the number of square spresent inside the battery icon on the LCD screen. 08 Battery Full Battery 2/3 charged Battery 1/3 charged Battery empty When the battery power is low, the battery icon will flash and there will be a beep indicating that the batteries need to be replaced or recharged . 3.7 Memory function There is a memory function (including the on / off status) when the machine is turned off or off, and there is no need to reset the channel . 3.8 Restore factory settings In the shutdown state, press the key and the button at the same time, all settings are restored to factory settings. 3.9 How to communicate with each other Mutual communication must be set to the same channel and sub-audio, the need to press the PTT call key,Please keep the mouth and two-way radio distance of about 5 cm, 09 immediately after the release of the PTT button to release. Let the other party at any time call, note the same frequency for the radio, so when the letter can not write, Send no letter when the letter, in the launch of the signal when they can not hear each other to speak, the other side speaking time can not talk with each other, if forced to speak according to PTT, the other party will say can not hear, they said the other side can not hear.When the PTT is launched, the LCD has a transmission indicator ; the LCD is signed at reception . 4 . Channel and frequency (MHz).DCS Europe Channel Frequency DCS Number 446.00625 N114 53 446.01875 N131 57 446.03125 N132 58 446.04375 N165 65 446.05625 N226 70 446.06875 N306 79 446.08125 N371 88 446.09375 N503 99 10 America Channel Frequency DCS Number 462.5625 N43 44 462.5875 N65 48 462.6125 N116 55 462.6375 N205 68 462.6625 N261 75 462.6875 N265 77 462.7125 N271 78 467.5625 N306 79 467.5875 N311 80 10 467.6125 N331 82 11 467.6375 N365 87 12 467.6625 N431 93 13 467.6875 N466 98 14 467.7125 N503 99 11 Name Gender Add and postal code: Note: 1.This warranty card is only applicable to two-way radio of the above-listed model and serial number. 2.The warranty card is an important document for the end-user to enjoy warranty service, please keep it well. 3.The warranty card shall be filled and chopped by the dealer ,or it is invalid. 12 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each product are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal. To maintain compliance with the FCC’s RF exposure guidelines, hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to comply with the FCC RF exposure requirements, the antenna installation must comply with following: Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits. Your wireless hand-held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push-to-Talk (PTT) button is pressed. The device is authorized to operate at a duty factor not to exceed 50%.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : likui Create Date : 2017:04:22 17:59:32+08:00 Modify Date : 2017:08:24 16:06:38-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : likui Title : 备份备份备份RT36英文说明书-170420 Creator Tool : CorelDRAW Metadata Date : 2017:08:24 16:06:38-07:00 Producer : Corel PDF Engine Version 14.0.0.701 Document ID : uuid:6bbc9093-e603-41a4-a482-d76558fe47f1 Instance ID : uuid:277b02c0-8aed-4a45-9a47-53bb7482d94c Page Count : 14EXIF Metadata provided by EXIF.tools