HUNAN FN LINK TECHNOLOGY F11AMIM13-B1 WIFI Module User Manual

FN-LINK TECHNOLOGY LIMITED WIFI Module Users Manual

15_F11AMIM13-B1 UserMan,r1

Product SpecificationIEEE 802.11 b/g/n 2.4GHz 1T1R WiFi ModuleProject Name RTL8711AM IoT ModuleModel NO F11AMIM13-B1CustomerCustomer’s Part NOApproved: William Tan Checked: Jim Hu Drafted: Neal YuFeedback of customer’s ConfirmationWe accept the specification after Confirmed.Customer Customer signature Approved DateFN-LINK TECHNOLOGY LIMITEDA Building,HuiXin industrial park,No 31,YongHe road, Fuyong town, Bao'anDistrict,Shenzhen City, CHINATEL: 86-0755-29558186FAX: 86-0755-29558196Website: www.fn-link.com
FN-LINK TECHNOLOGY LIMITEDPage2/12CONTENTS0 REVESION HISTORY....................................................................................................................................31 INTRODUCTIONS.......................................................................................................................................... 41.1 OVERVEIW.............................................................................................................................................. 41.2 PRODUCT FEATURES..........................................................................................................................42 BLOCK DIAGRAM..........................................................................................................................................53 GENERAL SPECIFICATION.........................................................................................................................64 MECHANICAL AND ELECTRICAL SPECIFICATION.............................................................................. 74.1 OUTLINE DRAWING..............................................................................................................................74.2 PIN DEFINITION.....................................................................................................................................94.3 PCB LAY-OUT REFERENCE..............................................................................................................114.4 RECOMMENDED REFLOW PROFILE............................................................................................ 124.5 NOTICE.................................................................................................................................................. 12
FN-LINK TECHNOLOGY LIMITEDPage3/120. Revision HistoryREV NO Date Modifications Draft ApprovedRev0.1 2015-03-20 First Released Neal Yu William Tan
FN-LINK TECHNOLOGY LIMITEDPage4/121. Introduction1.1 OverviewF11AMIM13-B1 is a highly integrated module with low power 802.11n Wireless LAN(WLAN) networkcontroller. It combines an ARM-CM3 MCU, WLAN MAC, a 1T1R capable WLAN baseband, and RFfunction. It also provides a bunch of configurable GPIOs which are configured as digital peripherals fordifferent applications and control usage.F11AMIM13 integrates internal memories for complete WIFI protocol functions.1.2 Product FeaturesGeneral24mm*18mm*1.6mmCMOS MAC, Baseband PHY, and RF in the module for 802.11b/g/n compatible WLANComplete 802.11n solution for 2.4G band150Mbps receive PHY rate and 150Mbps transmit PHY rate using 40MHz bandwidthStandards Supported802.11b/g/n compatible WLAN802.11e QoS Enhancement(WMM)802.11i(WPA,WP2). Open, shared key, and pair-wise key authentication servicesWiFi Direct supportLight Weight TCP/IP protocolWLAN PHY Features802.11n OFDMOne Transmit and one Receive path(1T1R)20MHz and 40MHz bandwidth transmissionShort Guard Interval(400ns)Maximum data rate 54Mbps in 802.11g and 150Mbps in 802.11nHost Interface2 x UART1x I2C1x SPI3x PWM1x ADCGPIO
FN-LINK TECHNOLOGY LIMITEDPage5/122. Block diagramThe general block diagram for the module is shown in Figure 1Figure 1
FN-LINK TECHNOLOGY LIMITEDPage6/123. General specificationGeneral featuresMain Chipset Realtek RTL8711AMHost Interface UART,I2C,SPI,PWM,ADCWiFi Standards 802.11b/g/nOther RF Standards NoneDimension L24.0mm*W18.0mm*H0.8mmOperating conditionsOperating Voltage 3.3±10% VdcOperating Temperature 0°C to +70°CStorage Temperature -40°C to +80°CRF featuresOperating Frequency 2.400～2.4835GHzChannelsWiFi:USA/Canada: channel 1~11;Europe/China/Australia: channel 1~13;Japan: channel 1~14ModulationWiFi:802.11b(DSSS): CCK(11, 5.5Mbps), DQPSK(2Mbps), DBPSK(1Mbps);802.11g(OFDM): BPSK(9,6Mbps), QPSK(18,12Mbps),16QAM(36,24Mbps), 64QAM(54,48Mbps);802.11n(OFDM): BPSK, QPSK, 16QAM, 64QAM(150Mbps)PHY Data ratesWiFi:802.11b: 11,5.5,2,1 Mbps802.11g: 54,48,36,24,18,12,9,6 Mbps802.11n: up to 150MbpsOutput PowerWiFi:802.11b 16±2dBm802.11g 14±2dBm802.11n 13±2dBmEVM802.11b EVM≦35%802.11g EVM≦-25dB802.11n EVM≦-28dB
FN-LINK TECHNOLOGY LIMITEDPage7/12SensitivityWiFi:802.11b@8% PER1Mbps -88dBm2Mbps -87dBm5.5Mbps -85dBm11Mbps -82dBm802.11g@10% PER6Mbps -86dBm9Mbps -85dBm12Mbps -84dBm18Mbps -82dBm24Mbps -80dBm36Mbps -77dBm48Mbps -73dBm54Mbps -71dBm802.11n_HT20@10% PERMCS 0 -83dBmMCS 1 -82dBmMCS 2 -80dBmMCS 3 -78dBmMCS 4 -75dBmMCS 5 -71dBmMCS 6 -69dBmMCS 7 -67dBmOther featuresAntenna Internal AntennaNetwork ArchitectureWiFi:Ad-hoc mode (Peer-to-Peer )Infrastructure modeWiFi DirectSecurity 802.11i(WPA,WP2). Open, shared key, and pair-wise keyauthentication services4. Mechanical and Electrical Specification4.1 Outline Drawing(Unit: mm)Top Side Bottom SideNote:There Will be Changes in Layout ,But the Outline Will not Change,The Follow-up Will be Updated
FN-LINK TECHNOLOGY LIMITEDPage8/12(Top View)
FN-LINK TECHNOLOGY LIMITEDPage9/124.2 Pin Definition(Top View)Pin AssignmentPin# Name Description1 GND Ground2 GND Ground3 NC Not Connected4 NC Not Connected5 NC Not Connected6 NC Not Connected7 VDDIO GPIOE and GPIOC group IO power8 NC Not Connected9 GPIO_4 GPIO Pin10 GPIO_3 GPIO Pin11 GPIOE_2/PWM2 GPIO Pin, PWM(multiplexing)12 GPIOE_1/PWM1 GPIO Pin, PWM(multiplexing)13 GPIOE_0 GPIO Pin14 NC Not Connected15 ADC_CH2 AD converter input16 NC Not Connected17 GND Ground18 CHIP_EN 1: Enable Chip0: Disable chip in shutdown mode19 NC Not Connected
FN-LINK TECHNOLOGY LIMITEDPage10/1220 NC Not Connected21 NC Not Connected22 GPIOA_3 GPIO Pin23 NC Not Connected24 GPIOA_5 GPIO Pin25 GPIOA_6/UART0_RXD GPIO Pin, UART0_IN(multiplexing)26 GPIOA_7/UART0_TXD GPIO Pin, UART0_OUT(multiplexing)27 GND Ground28 NC Not Connected29 NC Not Connected30 GND Ground31 NC Not Connected32 NC Not Connected33 GND Ground34 VD33 3.3V Power Supply35 GND Ground36 GPIOC_3/SPI0_MISO GPIO Pin, SPI0_MISO(multiplexing)37 GPIOC_2/SPI0_MOSI GPIO Pin, SPI0_MOSI(multiplexing)38 GPIOC_1/SPI0_CLK GPIO Pin, SPI0_CLK(multiplexing)39 GPIOC_0/PWM0 GPIO Pin, PWM(multiplexing)40 GPIOC_4/SPI0_CS1 GPIO Pin, SPI0_CS1(multiplexing)41 GPIOC_5 GPIO Pin42 GPIOB_3/I2C_SDA GPIO Pin43 GPIOB_2/I2C_SCL GPIO Pin44 GPIOB_1/UART1_RXD GPIO Pin, UART1_IN(multiplexing)45 GPIOB_0/UART1_TXD GPIO Pin, UART1_OUT(multiplexing)46 NC Not Connected47 NC Not Connected48 GND Ground49 NFCIP_1 NFC input differential signal50 NFCIN_1 NFC input differential signal51 RF_1 WL RF signal52 GND Ground53 GND Ground54 GND Ground
FN-LINK TECHNOLOGY LIMITEDPage11/124.3 PCB Lay-out Reference
FN-LINK TECHNOLOGY LIMITEDPage12/124.4 Recommended Reflow ProfileReferred to IPC/JEDEC standard.Peak Temperature : <250°CNumber of Times : ≤2 times4.5 Patch WIFI modules installed before the notice:WIFI module installed note:1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open astencil2. Take and use the WIFI module, please insure the electrostatic protective measures.3. Reflow soldering temperature should be according to the customer the main size of the products,such as the temperature set at 250 + 5 ℃for the MID motherboard.About the module packaging, storage and use of matters needing attention are as follows:1. The module of the reel and storage life of vacuum packing: 1). Shelf life: 8 months, storageenvironment conditions: temperature in: < 40 ℃, relative humidity: < 90% r.h.2. The module vacuum packing once opened, time limit of the assembly:Card: 1) check the humidity display value should be less than 30% (in blue), such as: 30% ~ 40%(pink), or greater than 40% (red) the module have been moisture absorption.2.) factory environmental temperature humidity control: ≦30 ℃,≦60% r.h..3). Once opened, the workshop the preservation of life for 168 hours.3. Once opened, such as when not used up within 168 hours:1). The module must be again to remove the module moisture absorption.2). The baking temperature: 125 ℃, 8 hours.3.) After baking, put the right amount of desiccant to seal packages.
WARING: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) T his devic e ma y n ot ca use h armful interference. ( 2) T his device must accept any interfer ence received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital dev ice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfe rence in a residential installation. This equipment generates uses and ca n radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause ha rmful interference to radio or televi sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: C hanges or modifications not expressly approved by the party responsible for comp liance could void the user's authority to operate the equipment. LABEL OF THE END PRODUCT: The final end prod uct must be lab elled in a visible are a with the foll owing "Co ntains TX F CC ID: 2AATL-F11AMIM13-B1". If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operati on is sub ject to the following two conditions: (1) this d evice may not cause harmfu l interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure This device has been eval uated and sho wn compli ant with the F CC R F Exposur e limits under fix ed exposure c onditions ( antennas are greater than 20cm from a p erson's body) when i nstalled in certa in specific OEM configurations. IMPORTANT NOTE: This device is intended only for OEM integrators under the following conditions: (1) According to F CC Part 15 Subpart C Se ction 15.212, the rad io elements of the mod ular transmitter must have the ir o wn s hielding. Ho wever, d ue to t here is no shiel ding for this W IFI/BT module, this module is granted as a Limited Modular Approval. (2) This modul e has be en d esigned to op erate with E xternal anten na（I-PEX connector ） havi ng a maximum gain of 0dBi. The module is only certif ied with the installed antenna. An y change of the antenna will void the certification. (3) Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under control of the Grantee . The modul e will be res ponsible to satisfy SAR/RF Exp osure req uirements, when the module int egrated into any (portable, mob ile, fix ed) h ost device. T his modu le is int ended for OEM integrator on ly and the OEM integr ators an d instructe d to ensure th at the e nd us er h as no ma nual instructions to remove or install the device. T he OEM i ntegrator is still res ponsible for the FC C compliance requirement of the end product, which integrates this module. The module has no sh ielding an d tested s tand alone. This modu le is te sted an d approved as Limited modular ap proval with stand alon e configuration, an y OE M incorpor ated this radio m odule into a ny system are require additional testing and evaluation. EU Regulatory Conformance Hereby, we (F N-Link T echnology Limited) declared that this device is in compliance with the essenti al requirements and other relevant provisions of Directive 1999/5/EC.

Navigation menu