HWM Water 485 EchoChirp AMR Transmitter User Manual User guide 3

HWM-Water Ltd EchoChirp AMR Transmitter User guide 3

User guide 3

485-022-V2 485-024-V2 FCC ID: RUZ-485 Temperature Part number : MAN-485-0030-B If further support or assistance is required, please contact FCS Technical Support on 1-800-531-5465 or e-mail sales@uidconservaon.com WARNING: - LITHIUM BATTERIES If baeries are exposed - do not short circuit, re-charge, puncture, incinerate, crush, immerse, force discharge or expose to temperatures above the declared operang temperature range of the product. Risk of re or explosion. These baeries are sealed units which are not hazardous when used according to the recommendaons of the manufacturer. 2. OPERATION The reed switch is located on the front right of the unit. The unit will normally be transming out of the box. If a restart is required or the unit doesn’t appear to transmit, use the reed switch to iniate transmission. Hold a magnet to close the reed switch and cause the rmware reset. A click from the reed switch may be heard followed by a transmission burst. Reed switch operaon can be veried using an RF scanner tuned to the transmission frequency, when transming a burst or blip can be heard. 1. INSTALLATION Opmum operang temperature should be below +50°C. We cannot guarantee the maxi-mum life; therefore it is recommended to keep within the opmum operaon tempera-ture range for maximum baery performance. If monitoring hot water systems it is not advisable to mount the transmier directly on the pipe without intervening insulaon. For maximum transmission range the antenna of the transmier should point upward (vercal polarizaon) and should be kept clear of obstrucons, parcularly metallic surfaces. Mounng brackets are available, to t the cavity at the rear of the transmier. Operang in extreme environmental condions will degrade the life-me of the baery.

Navigation menu