HWM Water 485 EchoChirp AMR Transmitter User Manual User guide 3

HWM-Water Ltd EchoChirp AMR Transmitter User guide 3

User guide 3

Download: HWM Water 485 EchoChirp AMR Transmitter User Manual User guide 3
Mirror Download [FCC.gov]HWM Water 485 EchoChirp AMR Transmitter User Manual User guide 3
Document ID2498189
Application IDKGwWsHyNXOBiE/gtVh4nag==
Document DescriptionUser guide 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize79.51kB (993836 bits)
Date Submitted2015-01-13 00:00:00
Date Available2015-01-13 00:00:00
Creation Date2014-12-19 10:59:30
Producing SoftwareMicrosoft® Publisher 2013
Document Lastmod2014-12-19 10:59:30
Document TitleUser guide 3
Document CreatorMicrosoft® Publisher 2013
Document Author: matt_h

FCC ID: RUZ-485
1. INSTALLATION
Optimum operating temperature should be below +50°C. We cannot guarantee the maximum life; therefore it is recommended to keep within the optimum operation temperature range for maximum battery performance.
If monitoring hot water systems it is not advisable to mount the transmitter directly on the
pipe without intervening insulation.
For maximum transmission range the antenna of the transmitter should point upward
(vertical polarization) and should be kept clear of obstructions, particularly metallic
surfaces. Mounting brackets are available, to fit the cavity at the rear of the transmitter.
Operating in extreme environmental conditions will degrade the life-time of the battery.
485-022-V2
485-024-V2
Temperature
WARNING: - LITHIUM BATTERIES
If batteries are exposed - do not short circuit, re-charge, puncture, incinerate, crush, immerse, force
discharge or expose to temperatures above the declared operating temperature range of the product.
Risk of fire or explosion. These batteries are sealed units which are not hazardous when used according
to the recommendations of the manufacturer.
2. OPERATION
The reed switch is located on the front right of the unit. The unit will normally be
transmitting out of the box. If a restart is required or the unit doesn’t appear to transmit,
use the reed switch to initiate transmission. Hold a magnet to close the reed switch and
cause the firmware reset. A click from the reed switch may be heard followed by a
transmission burst.
Reed switch operation can be verified using an RF scanner tuned to the transmission
frequency, when transmitting a burst or blip can be heard.
If further support or assistance is required, please contact FCS
Technical Support on 1-800-531-5465
or e-mail sales@fluidconservation.com
Part number : MAN-485-0030-B


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-GB
Tagged PDF                      : Yes
Author                          : matt_h
Create Date                     : 2014:12:19 10:59:30+00:00
Modify Date                     : 2014:12:19 10:59:30+00:00
Producer                        : Microsoft® Publisher 2013
Creator                         : Microsoft® Publisher 2013
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RUZ-485

Navigation menu