HWM Water 553 USB Transceiver User Manual User Guide

Download:
Mirror Download [FCC.gov]
Document ID	3580592
Application ID	bGIOSPuEr7gBtdhzEsxceg==
Document Description	User Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	36.88kB (460969 bits)
Date Submitted	2017-09-26 00:00:00
Date Available	2017-09-27 00:00:00
Creation Date	2017-07-25 14:59:43
Producing Software	Microsoft® Publisher 2013
Document Lastmod	2017-07-31 15:05:13
Document Title	User Guide
Document Creator	Microsoft® Publisher 2013
Document Author:	matt_h

HWM Water Ltd
Ty Coch House
Llantarnam Park Way
Cwmbran
NP44 3AW
UK
DDI:+44 (0)1633 627842
Tel: +44 (0)1633 489479
This guide covers only
the most basic operations.
For other features and
more details, see
www.hwmglobal.com
USB TRANSCEIVER QUICK START GUIDE
This guide covers only the most basic operations including connections and commissioning.
1. INTRODUCTION
The USB Transceiver is a setup and configuration tool for various HWM devices. Please refer
to your main product guide for more details.
HWM reserves the right to change any product specification without prior notice.
Quick Start Guide
USB Transceiver
2. SETUP INSTRUCTIONS
LEDs will illuminate.
3.
Insert USB into computer.
2.
Attach antenna.
1.
3. INSTALLATION
For maximum transmission range the antenna of the transmitter should point upward
(vertical polarization) and should be kept clear of obstructions, particularly metallic surfaces.
Do not expose the USB Transceiver to moisture.
If further support or assistance is required, please contact HWM
Technical Support on 01633 489479
or e-mail cservice@HWM-Water.com
Part number : MAN-553-0003-A
WARNINGS:
4. OPERATION
Power
Receiving from
antenna
Antenna
USB
Ready
Transmitting from
antenna




Communicating with
PC—in / out
‘Power’ LED indicates device is plugged in to the PC and is on.
‘Ready’ shows that the device is not currently performing an action, so is available to
start receiving or transmitting.
‘Receiving’ and ‘Transmitting’ LEDs show the device is communicating with the target
device.
The ‘Communicating’ LEDs indicate that the device is communicating with the PC;
Red = data in to the PC, Green = data from the PC.
SIMPLIFIED DECLARATION OF CONFORMITY
This simplified EU declaration of conformity referred to in article 10(9) shall
be provided as follows:
Hereby, HWM Ltd declares that the radio equipment type transceiver is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
www.hwmglobal.com
FCC warning statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et
d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement
d'une communication satisfaisante.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Warranty
All equipment is warranted by HWM-Water Ltd to be free from defect in materials and workmanship under normal
use for a period of one year from the data shipped to the original customer. This warranty in only valid if the equipment:
1.
is properly installed and operated under conditions of normal use in accordance with HWM’s published
instructions set out in the manual;
is operated in compliance with federal, state, county and local codes and,
is operated in accordance with standard industry practices.
2.
3.
4.
As the exclusive remedy for any breach of warranty, HWM will repair or replace (at HWM’s option) the nonconforming equipment. HWM shall have no liability for incidental, special, punitive or consequential damages arising
from any defect in, or malfunction of, the equipment to any party. This warranty does not cover any costs incurred for
the removal or installation of equipment.
If any problems occur, you should notify HWM or its authorised representative, giving full details of the problem, the
model and serial numbers of the equipment and the HWM invoice number the equipment was shipped against. You
will receive technical advise and / or shipping instructions depending on the nature of the problem. If the problem
cannot be resolved you will be issued with an RMA number and a return address label so that the products can be
shipped back to HWM for inspection. Once we have reviewed and confirmed that the product is in warranty, we will
contact you to confirm what action we will be taking to resolve the issue.
All warranty and service activity must be undertaken by an authorised representative of HWM.
The express warranty is in-lieu of all other representations or warranties, express, implied or statutory and specifically excludes and warranty of merchantability or fitness for a particular purpose. There are no warranties that
extend beyond the description on the face hereof. No parties or affiliates can make any warranty, promises or
representations either written or oral to the quality of products other than what is set out herein.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : matt_h
Create Date                     : 2017:07:25 14:59:43+01:00
Modify Date                     : 2017:07:31 15:05:13+01:00
Language                        : en-GB
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : matt_h
Creator Tool                    : Microsoft® Publisher 2013
Metadata Date                   : 2017:07:31 15:05:13+01:00
Producer                        : Microsoft® Publisher 2013
Document ID                     : uuid:d81db977-8670-416b-8a4a-b850659f52d9
Instance ID                     : uuid:f5defa6c-c49a-4cf3-b9ef-a6baa5e938aa
Page Count                      : 2

EXIF Metadata provided by EXIF.tools