HYUNDAI MOBIS AN340ETAN CAR AVN User Manual 1
HYUNDAI MOBIS CO., LTD. CAR AVN 1
Contents
- 1. User manual -1
- 2. User manual -2
User manual -2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1768222 |
| Application ID | HCfTM4zhLQWjb0JAlYaHiQ== |
| Document Description | User manual -2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 415.6kB (5195018 bits) |
| Date Submitted | 2012-08-16 00:00:00 |
| Date Available | 2013-02-12 00:00:00 |
| Creation Date | 2012-08-16 10:09:55 |
| Producing Software | Adobe Acrobat Pro 9.0.0 |
| Document Lastmod | 2012-08-16 10:10:02 |
| Document Title | 슬ë¼ì´ë“œ 1 |
| Document Creator | Adobe Acrobat Pro 9.0.0 |
| Document Author: | auney |
BT Audio Bluetooth Audio Selecting Bluetooth Audio While playing ▶ Shortly push the controller left/right (under 0.8 seconds) or shortly press the [SEEK], [TRACK] key to select the previous/next song. Notice • The title/artist info may not be supported in some mobile phones. • Play/Pause, Previous/Next function may not be supported in some mobile phones. Auto Playlist Auto Playlist Auto Playlist Press the [MENU] key ▶ Select [Auto Playlist] The Auto Playlist feature is supported only within DISC CD, USB Audio, and Jukebox Audio modes. List of songs similar with the current song is displayed. Once the desired song is selected, then Auto Playlist mode will operate. Press Back to cancel viewing Auto Playlist. Notice • Auto Playlist is a Gracenote feature and will operate only after song information has been checked. Exiting Auto Playlist Auto Playlist mode can be exited by starting a different AV mode or by pressing [Exit Auto Playlist] within [MENU]. 3 Navigation Before Use Starting Navigation Searching Destinations Route Menus Navigation Settings GPS Information Navigation Before Use Safety Cautions • For safety, some functions will be inactive while the vehicle is in motion. Buttons that cannot be operated will be inactive. • Roads names and POI information may not always be completely updated. Some places may not include up-to-date information. • The route displayed for destination guidance is a reference that will take you to the vicinity of your destination. • The navigation system uses GPS information, various sensors, road map data, and other related information to display the current position. Errors may occur if the satellite is transmitting inaccurate signals or if which can only two or less satellite signals can be received. Errors which occur in such conditions cannot be corrected. • The current position may become displayed on at a place somewhat different from your actual location. The car position mark may differ from the actual location due to the state of the GPS satellites or the vehicle (driving location and conditions). In addition, the car position mark can become deleted from the actual position when driving on roads different from the map data, such as newly constructed roads. • Even if the car position mark on the map is different, map matching or GPS info are used to automatically update the current position. (In such cases, up to several minutes may be required.) Navigation About the Map Some roads, site names, facility information and fare rates may have changed after map data development and may differ with actual road conditions. About Map Scale If 100m is displayed on the left side of the map, this represents a map scale of 1/10,000. About Map DB Actual distance Level 10 11 12 13 14 mi / ft 150 ft 300 ft 700 ft 0.25 mi 0.5 mi 1 mi 2 mi 4 mi 8 mi 16 mi 32 mi 64 mi 130 mi 250 mi km / m 50 m 100 m 200 m 400 m 800 m 1.6 km 3.2 km 6.4 km 12 km 25 km 50 km 100 km 200 km 400 km Information • Turn the controller left/right to change the scale. About Map Icons Icons displayed on the map may be different with actual conditions. Also, display of multiple icons may be displayed under one mark. Unlicensed copying of the map in any form, in full or in part, is strictly prohibited. About Map Updates 1. Download the update file from http://www.mapnsoft.com to your computer then unzip it. 2. Move the update files to the root of your USB. 3. To learn more, refer to the ‘System Update’ section of this user’s manual. Navigation Guidance when using other modes About Voice Guidance During destination guidance, voice guidance will be provided when you reach an intersection or are near your destination.- Example of voice guidance when arriving at the destination You are near your destination. Voice guidance will end. -In front of an intersection Turn right in about 700m. Right turn ahead. -Upon entering a toll road Right turn ahead. You are entering a motorway. Toll gate ahead. ※ Please use voice guidance only as a reference to assist in your driving. Information • The above voice guidance examples are normal cases. However, the actual voice guidance may differ depending on the road type. • If the car position is not accurately measured, then voice guidance may not be given, or may be given later or improperly. • It is possible to adjust the Navigation guidance volume. Voice guidance will continue even when converting from the navigation screen to a different mode screen. Information Even when voice guidance has been muted, destination guidance will continued to be provided. Navigation Basic Mode Screen No. Name Car direction and Scale Map direction and GPS reception state and scale display Lane Info Recommended lanes taking the following intersection and expected route into consideration Preliminary Guidance Displays direction, ETA, remaining time and distance from current position to the destination Speed Limit Displayed at all times when driving on roads with speed limits Car Position Mark Displays the current vehicle position and direction Remaining Distance Remaining distance until next turn NAVI Home Displays the Navi menu screen MENU Destination, Route and NAVI Setup, GPS Info list Guidance Mode Changes the right Navi screen mode 10 Cancel Route Cancels the currently set route 11 Traffic Enters the Traffic List screen. Provides traffic information for areas nearby the current position and current route. Detour routes can be calculated in the existence of traffic conditions (Construction, Incident, Accident). 12 Map Mode Sets map display mode 13 POI Displays the POI list 14 Navigation Volume Controls navi voice guidance volume 15 Mute Mutes navi voice guidance 16 Add to My Places Add my places and user cameras to the current position 17 Route Options Used to recalculate route to the destination 10 11 12 13 14 15 16 17 Details Navigation Information • When riding in a new car or after replacing the battery terminal, the car position mark may appear at a location different from your actual current position. • Even if the car position mark on the map is different, map matching or GPS info are used to automatically update the current position. Starting Navigation Press the [MAP VOICE] key or press the [HOME] key ▶ Turn the controller left/right and select Navigation ▶ Navigation mode will start. Information • If you turn on AV mode while the Navigation is operating, only voice guidance will be provided. Changing the Map Mode Press the [MAP VOICE] key ▶ Press [MENU] ▶ Select [Map Mode] Displaying the Current Position Press the [MAP VOICE] key within any mode while using to system to display the current position, vicinity and the current position mark. No. Name Details Heading Up/Nort h Up Displays map in Vehicle Traveling Direction (Heading Up) or the North-Up direction Auto Zoom Sets whether to automatically adjust the map scale when the vehicle is in motion Navigation This feature is used to set map screen related options, such as Heading up/North up, Auto Zoom setting. Information • If the map scale is above 16mi, the map display mode will be changed automatically to 2D NorthUp. No. Name POI Icons Edit POI Icon Search by Local POI Details Sets POI facilities Sets the 6 POI icons to the desired genre through user editing Moves to Search by POI screen Add to My Places POI Press the [MAP VOICE] key ▶ Press [MENU] ▶ Select [POI] Press the [MENU] key ▶ Select [Add to My Places] Within the screen when the POI menus are displayed, pressing one of the 6 facility icon buttons will display the corresponding facilities. This feature is used to save the current position or the scrolled position as a My Place. To save the position, press the controller after selecting the desired group. Information • My Places are saved without distinction for the driving state or the scrolled state. • To edit or delete registered mark, refer to the ‘My places’ section. Navigation Searching Destinations No. Name Destination search by entering the Street, City and State Search by Address Search by POI POI searches for current position/scroll position/destination/region Previous Destinations Destination guidance for recently set locations Previous Start Position Destination guidance for recently set start position Previous Searches Destination guidance for recently searched locations Emergency Used to search nearby Police station, Hospital, Auto Services from current position My Places Destination guidance for recently added My Places Quick Menu Moves to Quick menu Favorites Displays Home/Office/Favorites list 10 Intersection Used to search destinations by selecting streets/intersections 11 Coordinates Destination search by entering latitude and longitude 12 Exit/Entrance 13 Previous Map Details 10 11 12 13 Used to search destinations by searching for expressway exits/entrances Moves to previous map screen Navigation Quick Menu These menus allow you to set frequently used menu to Quick List. To add or delete Quick list, select the [RHT] Edit Quick Menu button. Press the [DEST] key ▶ Press [LFT Quick Menu button. No. Name Favorites Press the [DEST] key ▶ Press [ ]Favorites button. Details Quick Lists Registered Quick menu lists Edit Quick Add and delete Quick menu lists Menu Menu Lists Editable Quick menu lists Deselect All Unmark all selected Quick menu Done Finishes editing Quick menu Information • Among 11 quick menus, Up to 7 quick menu can be added to Quick menu. This feature is used to register frequently visited positions to favorites. Select the [RHT] Edit Favorite Place to add or delete favorites. Navigation POI Search Address Search No. Name Details Favorites lists Registered Favorites lists Edit Favorites Add, edit, and delete Favorites Menu Lists Press the [DEST] key ▶ Select [Search by Address] Press the [DEST] key ▶ Select [Search by POI] ▶ Select the desired Category Editable Quick Menu lists Information • Up to 7 positions can be added to Favorites. This search feature is used to search destinations by addresses through Street/City/State. No. Name Details No. Name Category Details Search for POIs by selecting through POI categories Search for ZAGAT restaurant guide POIs from among POIs within the vicinity Street Destination search by entering the street address ZAGAT Select City Destination search by entering the city name Name Search POIs by name State Selects state Phone Number Destination search by entering the phone number State Selects state No. Name Details N e a r C u r r e n t Searc h e s PO I aro u n d t he Position vehicle's current position Near Scroll Mark searches facilities based on the current scrolled position Near Destination searches facilities based on the location of the destination Near city center searches facilities based on the selected location Category Selects POI categories POI Mark Selects POI marks Phone Number Press the [DEST] key ▶ Select [Search by POI] ▶ Select [Phone Number] This search feature is used to search destinations by criteria (Near current position, Near scroll mark, Near destination) This feature is used to search the locations of POIs by entering the phone number of the facility you wish to search. When entering the phone number, the area code must be included. Navigation Information • The telephone number and location may not the same for some POIs. In addition, the following types of facilities may be more frequently located in other locations. • Locations of department stores, museums, and amusement parks may somewhat differ from the set destination. Check the exact address when trying to reach such destinations. • Within general information newspapers, there are cases when phone numbers of concert halls list the numbers of managing companies. In such cases, searches will be to the managing company. • The telephone number and addresses may change at any time. Previous Destinations Press the [DEST] key ▶ Select [Previous Destinations] Previous Start Position Press the [DEST] key ▶ Select [Previous Start Position] Emergency Press the [DEST] key ▶ Select [Emergency] These search features allow you to search previous start points to use to set destinations or waypoints. Previous Searches Press the [DEST] key ▶ Select [Previous Searches] This menu is used to search nearby police stations, hospitals, and dealerships. These search features allow you to search previous routes to use to set destinations or waypoints. These search features allow you to search previous searches to use to set destinations or waypoints. Navigation My Places Intersection No. Press the [DEST] key ▶ Select [My Places] Name Details Sort Sort POIs and locations by name/symbol/date Add Adds a new place to My Place group Edit Edits selected place Delete Deletes selected place Delete All Deletes all registered places Edit group Edits My Places group name name Press the [DEST] key ▶ Select [Intersection] This search feature is used to search destinations by selecting previously saved My Places from the list to set as Destinations. This feature is used to set intersections as destinations by searching for the names of two streets and finding where they intersect. Navigation Coordinates Press the [DEST] key ▶ Select [Coordinates] Exit/Entrance Press the [DEST] key ▶ Select [Exit/Entrance] This feature is used to search the locations by entering longitude and latitude coordinate information. This search feature is used to search destinations by entering the Exits and Entrances of corresponding expressways. Information • When entering one digit number, 0(zero) should be entered first. Enter the name of the Freeway corresponding to the desired destination. Once search is complete, press the controller to select the desired location from the list. Navigation Set as Destination Previous Map Press the [DEST] key ▶ Select [Previous Map] After verifying the location of the searched position, select the [Set as Destination] button to calculate the route. The Route Overview or Multipath screen will be the displayed. The previously displayed position is displayed by scrolling the map. N0. Name Press the [DEST] key ▶ Search destination ▶ Select [Set as Destination] After searching for the destination according to the map search method, select the desired destination from the list. (For more information on destination search methods, refer to the Destination Search section.) Details Sets the facility or position where the cursor is positioned as the new destination Sets the facility or position where Add the cursor is positioned as a Waypoint waypoint Adds the facility or position where Add to My the cursor is positioned to My Places Places Set as Destination POI Sets destination by searching POI Call Makes a all to the facility or position where the cursor is positioned Navigation Within the Route Overview or Alternative Route screen, press the [Map VOICE] key or select the [Start Guidance] button to begin guidance. To add a destination, select the [Add Waypoint] button. Information • The Alternative Route display can be turned off at [Navi Setup] ▶ [Route Search] ▶ Use Alternative Route Search • If you select the [Set as Destination] button while a previous destination has already been set, the pop-up ‘Do you want to change the destination?’ is displayed. • If you select [Yes], then the previous destination is deleted and the new destination is set. • If you select [Add Waypoint], then a new waypoint is added. Information • To learn more about ‘Alternative Route’, ‘Route Overview’ or ‘Detailed Route Settings’, refer to the ‘Route Menu’ section. Simulation Once route calculation is complete, select the [Simulation] button to view a demo of the route guidance. Navigation Add Waypoint During Simulation, pressing the [Map] key will end the Simulation and display the current map position. If you start driving the vehicle while the simulation is in progress, simulation will end and route guidance will start. Route Options In the map screen ▶ Press the [MENU] key ▶ Select [Add Waypoint] In the map screen ▶ Press the [MENU] key ▶ Select [Route Options] Searching for the destination according to the map search method after searching for waypoints within the map screen, select the [Add Waypoint] button to add the waypoint to the current route. Selecting the [Route Options] will display a pop up that allows you to change route settings and conditions. Once the settings are changed, the route will be recalculated by reflecting the changes. Information • Simulation will not operate after route guidance has begun. When wishing to use the simulation feature, do so after calculating the route but prior to receiving route guidance. Information • For more information on Fastest, Shortest, and other calculating options, refer to the “Route Option” section. Navigation Cancel Route In the map screen ▶ Press the [MENU] key ▶ Select [Cancel Route] ▶ Select [Yes] Route Guidance The preliminary guidance, intersection guidance, turn list guidance, motorway mode screen are displayed depending on the current road condition. Information • Within all guidance mode screens, pressing [RHT] Guidance Mode button will change the route guidance mode. • Each time the [RHT] Guidance Mode button is selected, the guidance mode will change in order of single screen → motorway guidance → turn list mode. • Motorway and intersection zoom guidance are displayed on when receiving guidance at corresponding roads. Preliminary Guidance Mode The currently calculated route is canceled and deleted. Within the destination guidance map screen, if the current position is on route, then intersection guidance will be provided when nearby an intersection. In addition, when nearby an intersection, the intersection zoom screen is displayed. At the top right side of the screen, the first and second turn info, remaining distance, direction and other information are displayed. Navigation Intersection Zoom Mode Motorway Mode This mode provides detailed guidance nearby intersections before an expected turn. This mode will start displaying before the intersection. Turn List Mode This mode shows turn information for the current the route. Upon entering a motorway during route guidance, the motorway mode will automatically be displayed. This mode is displayed when driving on an expected route and display mainly motorway related POIs. Selecting [All], [Summary] at the bottom right side of the screen will change the route guidance mode. Press the controller left/right to switch display mode and check POI info list. Information • Some POIs may not be displayed if seven(7) or more POIs exist within the position. Navigation Route Menu No. Name Details Cancel Route Cancels the currently set route Route Overview View route overview to the current destination Route Option Route calculation features that include various route calculation options and settings Edit Waypoint Add/delete/change order of destinations/waypoints Destination Info. Shows the estimated arrival time and remaining distance to the destination Route Info Detailed info on the route to the current destination and provides detour routing options Avoid Area Edit route by adding Avoid Areas/Editing Avoid Areas and Deleting Avoid Areas Navigation Canceling the Route In the map screen ▶ Press the [LFT] NAVI Home button ▶ Select [Route] ▶ Select [Cancel Route] ▶ Select [Yes] Route Overview In the map screen ▶ Press the [LFT] NAVI Home button ▶ Select [Route] ▶ Select [Route Overview] Within the Route Overview screen, selecting the [Alt. Route] button or setting ‘Calculate Alternative Routes upon Calculation’ within Navigation Setup will display alternative routes on the screen. No. Guidance to the current route is canceled. Name Start Guidance Edit Waypoint Route Info. Alt. Route Simulation No. Fastest Recommended route that reflects distance and traffic conditions Shortest The shortest distance from start point to destination Details Starts route guidance to the destination Add/delete/change order of destinations/waypoints Route guidance information to the set destination and calculate detours Displays various alternative route options to select the desired route calculation method Route simulation to the set destination Name Details Navigation Route Option Shortest In the map screen ▶ Press the [LFT] NAVI Home button ▶ Select [Route] ▶ Select [Route Option] Fastest No. Details Minimize Freeway Route calculation with minimal use of motorways Minimize Toll Roads Route calculation with minimal use of toll roads Use Ferries Route calculation by including/not including ferries Use HOV/Car Route calculation by Pool lanes including use of HOV lanes This option provides guidance by calculating the shortest distance route to the destination. Use Toll pass Route calculation by including use of Easy Pass Advanced Settings Traffic Info Route calculation by considering traffic information This option provides calculates routes by reflecting the average speed of streets and roads to the destination. Name Advanced settings allow you to set whether to include motorways, toll roads or ferries within route calculation. Navigation Edit Waypoint In the map screen ▶ Press the [LFT] NAVI Home button ▶ Select [Route] ▶ Select [Edit Waypoint] This feature displays the start point, waypoints and thee destination in list format and is used to edit corresponding positions or edit the order of the destinations included within the route. Destination Info Route Info In the map screen ▶ Press the [LFT] NAVI Home button ▶ Select [Route] ▶ Select [Destination Info] In the map screen ▶ Press the [LFT] NAVI Home button ▶ Select [Route] ▶ Select [Route Info] This feature shows the estimated arrival time, remaining distance, waypoint information, and map of the destination. This feature is used to check the key routes and re-set the route by setting detours for a fixed distance from the current position Navigation Avoid Area In the map screen ▶ Press the [LFT] NAVI Home button ▶ Select [Route] ▶ Select [Avoid Area] If you press the [Detour] button, you can set the size of the area to detour in 1/2/5/10 mile units. A route will be calculated by avoiding the set distance starting from the current position. It is possible to add/edit/delete avoid areas. Use the controller to set the range of the area you wish to avoid. No. Name Details Edit Name Edit name of Avoid Area Edit Edit size and area of Avoid Area Delete Delete set Avoid Area Avoid Avoid the set area Done Finalize setting Navigation NAVI Settings No. Name Details Main Displays options related to Units display/Estimated time of/Distance and Time to/Fuel Type/Select Voice/Driving Speed/Previous Destination Display/Auto Zoom Display Displays options related to route indicator line color/map font size/map color and trace features Route Search Displays route calculation options related to calculating alternative routes and upon route recalculation Guidance Displays options related to driver alert guidance Defaults Displays options used to initialize settings/initialize saved information Navigation Main In the map screen ▶Press the [LFT] NAVI Home button ▶ Select [NAVI Setup]▶ Select [Main] No Name 1 Unit Estimated Time of This option is used to set the estimated arrival time or the remaining time to the destination. Distance and Time to This option is used to set the distance and time to the destination or waypoint Guidance Prompts This option is used to set the navigation voice. Driving Speed Setting This option is used to set the estim ated travel speeds within normal r oads and motorways. These menus are used to set general options related to Navigation mode. This option is used to set the unit when displaying the vehicle speed Details Display 6 Previous Dest. Upon Start-up This option is used to set whether to display previous destinations upon starting the Navigation This option is used to calculate Time restricted routes by considering for times of road restricted roads. Navigation Display Route Search Press the [ LFT] NAVI Home button ▶ Select [NAVI Setup] ▶ Select [Display] No Name Route Indicator Line This feature is used to set the color of the route indicator line. Map Font Size This option is used to set the size of the font shown in the map between 3 levels. Map Display The map color can be set according to Day/Night/Auto modes. Trace This option is used to set whether to display the trace on the map Details Press the [LFT] NAVI Home button ▶ Select [NAVI Setup] ▶ Select [Route Search] These menus are used to set options displayed within the Navigation screen. No Name Details Use Alternative Search for alternative routes when Route Search calculating routes Upon Route recalculation, Sets whether to display routing display options upon recalculating routes search options Navigation Guidance Press the [LFT] NAVI Home button ▶ Select [NAVI Setup] ▶ Select [Guidance] This menu is used to reset saved changes and user preferences. No This menu is used to set options on driver alerts. Name Initialize Settings Memory Points Details used to initialize previous set navigation settings back to the default state used to initialize all searched lists, memory points and saved navigation information Traffic No Press the [LFT] NAVI Home button ▶ Select [NAVI Setup] ▶ Select [Traffic] Default Press the [LFT] NAVI Home button ▶ Select [NAVI Setup] ▶ Select [Default] Name Details Display Traffic and Flow Data on Map Select whether to display traffic information on the map Voice Prompt for Traffic and Flow Warning Select whether to provide voice guidance in front of Traffic Information. (On route - 3mile) Provide Traffic rerouting option Select whether to display Detour pop up in front of Traffic Information. (On route - 3mile) Navigation Traffic Information In the map screen ▶ Press the [MENU] key ▶ Select [Traffic] Traffic information will be shown on the map up until the scale is ~4mile. Displays the traffic information around vehicle for up to a radius of 50 miles. (Information exceeding 50 miles will not be displayed) The above list can be sorted by either Distance (Default) or Category. Select the [RHT] Select a Category button to display the screen in which traffic information categories can be selected. After selecting the desired menu among the six menus, press the [RHT] Done button to save. Once returning to the previous List screen, the corresponding Category list will be shown and maintained until Category information is changed. Information • Traffic Flow Information Normal, Free Flowing (46 mph ~) Moderate Congestion (26 ~ 45 mph) Selecting the list button will display the map of the corresponding point and a pop-up showing detailed traffic information is displayed on the right. Heavy Traffic, Stop and Go (0 ~ 25 mph) Road Construction Accident Congestion/Slow Traffic Incident Hazardous Road Conditions Travel Information Navigation GPS Info About GPS GPS (Global Positioning System) is a system developed and operated by the United States which determines the current location of the user (longitude ·latitude, etc) by generally using 3 or more satellites. This system is used with related GPS information, various sensors, road map data, and other related information for the purposes of navigation Information • For continued map updates, information collection and surveys are continuously being conducted to check for changes to roads and new road construction. Nonetheless, roads, facilities, and fares are under constant change. Consequently, it is impossible to completely delete any errors, including road updates, names, facilities, and fares. Keep such matters in mind when using GPS. • Roads with widths less than 3m are not included within the map data. Roads including sections with widths less than 3m may be deleted upon updating the map data When GPS information cannot be used GPS information may not operate under the following conditions. GPS Info In the map screen ▶ Press the [LFT] NAVI Home button ▶ Select [GPS Info] - When buildings, tunnels, or other obstructions block satellite signals - When materials are placed above the GPS antenna and block satellite signals - When the satellite is not transmitting - When a digital cellular phone (1.5GHz) is placed near the GPS antenna Errors unavoidable due to system characteristics The navigation system uses GPS information, various sensors, road map data, and other related information to display the current position. Errors may occur if the satellite is transmitting inaccurate signals or if which can only two or less satellite signals can be received. Errors which occur in such conditions cannot be corrected. This option is used to display the GPS satellite reception state, car speed and position. 4 Bluetooth® Before Use Starting Bluetooth® Dial Mode Screen Using Bluetooth® Operating Menus during a Call Contacts Call history Settings Bluetooth® Before Use Before Using the Bluetooth® Handsfree Precautions for Safe Driving What is Bluetooth®? Bluetooth® refers to a short-distance wireless networking technology which uses a 2.45GHz frequency to connect various devices within a certain distance. Supported within PCs, external devices, Bluetooth® phones, PDAs, various electronic devices, and automotive environments, Bluetooth® allows data to be transmitted at high speeds without having to use a connector cable. Bluetooth® Handsfree refers to a device which allows the user to conveniently make phone calls with Bluetooth® mobile phones through the AV/Navigation system. Bluetooth® Handsfree may not be supported in some mobile phones. To learn more about mobile device compatibility, visit www.hyundaiusa.com. Bluetooth® Handsfree is a feature that enables drivers to practice safe driving. Connecting the head unit with a Bluetooth® phone allows the user to conveniently make and receive calls and use contacts. Before using Bluetooth®, carefully read the contents of this user‟s manual. Excessive use or operations while driving may lead to negligent driving practices and result in accidents. Refrain from excessive operations while driving. Viewing the screen for prolonged periods of time is dangerous and may lead to accidents. When driving, view the screen only for short periods of time. Bluetooth® Cautions when connecting a Bluetooth® Phone Before connecting the head unit with the mobile phone, check to see that the mobile phone supports Bluetooth®® features. The passkey needed to connect the mobile phone can be verified/changed at PHONE ▶ Settings ▶ Change Passkey. Even if the phone supports Bluetooth®®, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth® power is turned off. Disable the hidden state or turn on the Bluetooth® power prior to searching/connecting with the Head unit. If the Bluetooth® audio is not operating, go to PHONE ▶ Settings ▶ Bluetooth Audio. If the feature is set to Off , turn On and try again. If Auto Connection is used, the Bluetooth® phone is automatically connected when the ignition is turned on, making it unnecessary to have to connect the phone with the head unit every time. Bluetooth® connection may become intermittently disconnected in some mobile phones. Follow these steps to try again. 1. Turn the Bluetooth® function within the mobile phone off/on and try again. 2. Turn the mobile phone power Off/On and try again. 3. Completely remove the mobile phone battery, reboot, and then again. 4. Reboot the Audio Video Navigation System and try again. 5. Delete all paired devices, pair and try again. If you do not want automatic connection with your Bluetooth® device, turn off the Bluetooth® feature within your mobile phone. The Handsfree call volume and quality may differ depending on the mobile phone. To set Auto Connection, go to PHONE ▶ Settings ▶ Auto Connection. The car name can be set at PHONE ▶ Settings ▶ Device Information. Park the vehicle when connecting the head unit with the mobile phone. Handsfree call quality and volume may differ depending on the model of your mobile phone. Bluetooth® Starting Bluetooth® Press the [PHONE] key Pairing and Connecting a Phone When no phones have been paired Press the [PHONE] key Press the [LFT] Add New button ▶ Enter passkey in Bluetooth® device When the „Search from Phone‟ screen is displayed, search for the system on your mobile device and enter the passkey. The default passkey is set to „0000‟. Information • Press the [Help] button on the screen to view the help section with information related to pairing and connecting Bluetooth® devices, and using Handsfree related features. • To learn more about searching from Bluetooth® devices and pairing, refer to the user's manual for your Bluetooth® device. • If the system becomes unstable or the authentication popup is not displayed due to some communication error, please wait or reset the Bluetooth® device and try again. Bluetooth® When a phone is already paired Connect Select the device you want to connect and press the [LFT] Connect button. If the phone you want to connect does not exist, press the [Add New] button to pair a new Bluetooth® device. Information • Bluetooth® features supported within the vehicle are as follows. Some features may not be supported depending on your Bluetooth® device. - Outgoing/Incoming Handsfree calls - Operations during a call (Switch to Private, Switch to call waiting, MIC on/off) - Downloading Call History - Downloading Mobile Contacts - Downloading USIM Contacts - Bluetooth® device auto connection - Bluetooth® Audio Streaming • Up to five Bluetooth® devices can be paired to the Car Handsfree system. • Only one Bluetooth® device can be connected at a time. • Other devices cannot be paired while a Bluetooth® device is connected. • Bluetooth® device connection cannot be canceled while a device is being connected. • Only Bluetooth® Handsfree and Bluetooth® audio related features are supported. Information • Normal operations are possible only within devices that support Handsfree or audio features, such as a Bluetooth® mobile phone or a Bluetooth® audio device. • If a connected Bluetooth® device becomes disconnected due to being out of communication range, turning the device OFF, or a Bluetooth® communication error, corresponding Bluetooth® devices are automatically searched and connected. • If the system becomes unstable due to communication errors between the car Handsfree and the Bluetooth® device, reset the Bluetooth® and try again. Upon resetting Bluetooth®, the system is restored to its factory release state. Information • New devices cannot be paired while a Bluetooth® device is connected. To pair a new device, first disconnect the currently connected device. Bluetooth® Disconnecting a Device Delete a Device Select the device you want to disconnect ▶ Press the [RHT] Disconnect button. Press the [MENU] key▶ Select [Delete] The currently connected Bluetooth® device is disconnected. A device cannot be deleted when it is connected. To delete a paired device, first disconnect the Bluetooth® connection. Press [Delete All] to delete all paired Bluetooth® devices. Information • If a paired phone is deleted, the call history and contacts will also be deleted. Bluetooth® Dial Mode Screen Dialing a Number No Name Number Field Shows entered numbers Send Calls the number End Ends the current call Search Moves to the contacts search screen Dial Pad Used to enter/delete numbers MENU Displays popup menu Call Connection Info Displays the other party‟s name/number, call time, battery strength/reception level Private Switches call to the mobile phone MIC Off Mutes call volume Description During a call Information • The mobile phone battery and signal strength icons may not be supported in some mobile phones. • The remaining battery level displayed on your mobile phone battery icon may slightly differ with the device display. • The speed dial feature may not be supported in some mobile phones. • The name of the other party is displayed if the other party‟s number is saved within your contacts. If not, only the phone number is displayed.. Bluetooth® Using Bluetooth® Making a Call from Speed Dial Making a Call Enter the 1 or 2 digit speed dial number with the Dial Pad (Press and hold the last number) Turn the controller left/right to dial numbers ▶ Press the [LFT] Send button. If you press the [LFT] Send button without entering a number, the Call History screen is displayed. Select the [←] button to delete dialed numbers. Press and hold the dial pad +0 (over 0.8 seconds) to enter a "+". Information Some features will not operate during a Bluetooth® Handsfree call. Information • For speed dials saved within mobile phones, up to 2 digits are supported. • The speed dial feature may not be supported in some mobile phones. Calling through Redial Press the hold (over 0.8 seconds) the [LFT] Send button or the [☎] key on the steering remote controller. A call is made to the most recently called number. Redialing is not possible when there is no call history or the Bluetooth® phone has not been connected. Bluetooth® Answering a Call Incoming call notice ▶ Press the [Accept] button or the [☎] key on the steering remote controller. Rejecting a Call Incoming call notice ▶ Press the [Reject] button or press and hold the [☎] key(over 0.8 seconds) on the steering remote controller. When a call is received on the connected phone, the bell will sound and the phone number of the other party will be displayed on the incoming call pop-up, as shown here. Information • When the incoming call pop-up is displayed, most functions within AV mode will not operate. Only the call volume and Navigation screens can be operated. • The telephone number may not be displayed in some mobile phones. The incoming call is rejected. Information • The reject call function may not be supported in some mobile phones. Bluetooth® Operating features during a Call Switching Call to Bluetooth® Phone During Handsfree call ▶ Press the [Private] button or press the [☎] key on the steering remote controller. Switching Call to the Handsfree During call on mobile phone ▶ Press the [Use Handsfree] button or press the [☎] key on the steering remote controller. End a Call While on a call▶ Press the [RHT] End button or press the [☎] key (over 0.8 seconds) on the steering remote controller. The Bluetooth® Handsfree call will end. The call will be switched from the Bluetooth® mobile phone to the car Handsree. The call will be switched from the Handsfree to the Bluetooth® mobile phone. Bluetooth® Switching to Call Waiting If another person calls while you are already on a call, the current call must be placed on hold or ended to answer the new call. No Name Description Hold 1st call Places current call on call waiting and answer new call End 1st call Ends current call and answer new call Reject Rejects new call and maintains current call Switch If there is a call waiting, switches to the waiting call waiting call Turning MIC On/Off While on a call ▶ Select [MIC Off] Information • Call waiting is a feature that allows the caller to answer a second call while already on a call. When call waiting is used, the first call is placed on waiting mode. • The Call Waiting feature may not be supported in some mobile phones. If there is waiting call, press the [MODE] key on the steering remote controller or press the [LFT] Switch button on the Phone screen. If you press the [MIC Off] button, The outgoing volume is muted and blocked to the other party. Bluetooth® Adjusting Ring/Call Volume Contacts While on a call ▶ Turn the [O] VOLUME knob on the head unit or press the [+], [-] keys on the steering remote controller ▶ Adjust the ring/call volume Press [PHONE] key▶ Select Contacts button. Name Information • The call volume as heard by the other party may differ depending on your mobile phone. Description Send Call the corresponding number Search Search contacts by name or number Download D ow n l o a d co n t ac t s f ro m Bluetooth® device Contacts List List of Downloaded Contacts MENU Displays popup menu Bluetooth® Information • Mobile phone contacts can only be searched when a Bluetooth® device is connected. • Up to 5,000 contacts saved in your Bluetooth® phone or USIM can be downloaded into the car contacts. Contacts that have been downloaded to the car cannot be edited or deleted. • Mobile phone contacts are managed separately for each paired Bluetooth® device (max 5 devices x 5,000 contacts each). Previously downloaded data is maintained even if the Bluetooth® device has been disconnected. (However, the contacts and call history saved to the phone will be deleted if a paired phone is deleted.) • It is possible to download contacts even during a call or during Bluetooth® streaming audio. • When downloading contacts, the icon will be displayed within the status bar. • It is not possible to commence download when the contacts download feature has been turned of within the Bluetooth® device. In addition, some devices may require device authorization upon attempting to download contacts. If downloading does not normally occur, check the Bluetooth® device settings or the screen state. • The download feature may not be supported in some mobile phones. Check to see that the Bluetooth® device supports the download feature. For more information of supported Bluetooth® devices and function support, visit www.hyundaiusa.com. Downloading Mobile Contacts Press the [MENU] key▶ Select [Download] Contacts saved within the mobile phone can be downloaded to the car system. Bluetooth® Searching Contacts (By Name) Select the [Search] button ▶ Select [Search by Name] Information • Upon downloading mobile phone contacts, the previous corresponding data is deleted. • This feature may not be supported in some mobile phones. • Upon downloading, contacts saved in your USIM and mobile phone are simultaneously downloaded. • Voice Recognition may not operate for several moments while contacts are being downloaded. • When using Contacts Sync, the contacts and call histories within your mobile phone are automatically downloaded upon connecting Bluetooth®. If you do not wish to use this feature, turn Contacts Sync Setting off. After inputting is complete, press the [LFT] Done button to search contacts. Information Upon search, it is possible to search by entering a part of the name. Bluetooth® Searching Contacts (By Number) Select the [Search] button ▶ Select [Search by Number] Information When searching a number, it is possible to search by entering a part of the entire number. (ex: if you enter “1234”, all numbers with “1234” will be searched. Call History Entering Call History Screen Press the [PHONE] key ▶ Select the Call History button. After inputting is complete, press the [RHT] Done button to search saved numbers. Bluetooth® Settings Name Ringtones Description Received Displays the incoming call history list Dialed Displays the outgoing call history list Missed Displays the missed call history list Send Dial to selected number Delete All Delete entire call history Information • The call history may not be saved in the call history list in some mobile phones. • Calls received with hidden caller ID will not become saved in the call history list. • Calling through the call history is not possible when there is no call history or the Bluetooth® phone has not been connected. • Up to 20 received, dialed and missed calls are each saved. • The time of received/dialed calls and call time information are not saved. In the Settings screen ▶ Select [Ringtones] Auto Connection In the Settings screen ▶ Select [Auto Connection] If auto connection is turned on, a Bluetooth® device will automatically be connected according to the selected setting. No Name Off Previous Phone User Selected Phone Connect by Priority Description Disables auto connection Automatically connects with the previously connected Bluetooth® phone Automatically connects to a user selected Bluetooth®® device Automatically connects according to the set Bluetooth® phone priority This option is used to select ringtones for the connected phone. Information • When set to [Mobile Ringtone], the ringtone set within the connected mobile phone will sound. • The Mobile Ringtone feature may not be supported in some mobile phones. • For mobile phones that do not support the Mobile Ringtone feature, the ring tone set within the system will sound. • For more information on mobile phones that support the Mobile Ringtone feature, visit www.hyundaiusa.com. Bluetooth® Contacts Sync In the Settings screen ▶ Select [Contacts Sync] You can play music files saved in your Bluetooth® device from the car. Device Information Change Passkey In the Settings screen ▶ Select [Device Information] In the Settings screen ▶ Select [Change Passkey] When connecting a Bluetooth® device, it is possible to automatically download contacts. Bluetooth Audio In the Settings screen ▶ Select [Bluetooth Audio] This option is used to check information about the handsfree device, such as device name, address, and type. This option is used to change the passkey needed upon connecting a Bluetooth® phone. The default passkey is set to „0000‟. Bluetooth® Data Initialization In the Settings screen ▶ Select [Data Initialization] Data Initialization is used to delete all call histories/paired phones, or initialization information related to the Bluetooth® Handsfree. Name Description Delete all call Histories Delete all dialed / received / missed call lists Delete All Phones Delete all registered phones Factory Defaults Reset Bluetooth® settings and data to factory state 5 Voice Recognition Using Voice Recognition Voice Command List Using Voice Recognition Using Voice Recognition Creating a suitable cabin environment When using the voice recognition feature, only commands listed within the user's manual are supported. Be aware that during the operation of the voice recognition system, pressing any key other than the [■VR] key will terminate voice recognition mode. For superior voice recognition performance, position the microphone used for voice recognition above the head of the driver’s seat and maintain a proper position when saying commands. Within the following situations, voice recognition may not function properly due to external sound. • When the windows and sunroof are open • When the wind of the cooling / heating device is strong • When entering and passing through tunnels • When driving on rugged and uneven roads • During severe rain (heavy rains, windstorms) After downloading the Bluetooth® contacts, it takes some times to convert the contacts into voice information. During this time, voice recognition may not properly operate. Pronounce the voice commands naturally and clearly as if in a normal conversation. The system may slow down slightly when using the Navigation to calculate a new route or re-calculating an existing route. In such cases, use voice recognition features after waiting a few moments. Using Voice Recognition Starting Voice Recognition Starting Voice Recognition Information • To change the Normal/Expert setting, refer to the Info/Settings section. Shortly press the [■VR] key on the steering remote controller (under 0.8 seconds) ▶ Say a command Screen displayed when Voice Recognition is Expert Mode. Once voice recognition starts, the voice command entry window and the six representative commands are displayed. • If voice recognition is in Normal Mode, then the system will say “Please say a command. (Beep)” • If voice recognition is in Expert Mode, then the system will only sound a beep tone. Screen displayed when Voice Recognition is Normal Mode (Six commands are displayed on the screen) Notice • For proper recognition, say the command after the voice instruction and beep tone. Using Voice Recognition Illustration on Using Voice Recognition Starting Voice Recognition Shortly press the [■VR] key (under 0.8 seconds). Skipping Prompts Ending Voice Recognition Shortly press the [■VR] key (under 0.8 seconds). Shortly press the [■VR] key (under 0.8 seconds). Please say a command (BEEP) Please say a command While prompt message is being stated Please say a command (BEEP) Help Shortly press the [■VR] key (under 0.8 seconds). Help. Please say a command (BEEP) Help Help. Please say a command Help Press and hold the [■VR] key (over 0.8 seconds) ▶ Ends Voice Recognition. Help. Please say a command
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Modify Date : 2012:08:16 10:10:02-07:00 Create Date : 2012:08:16 10:09:55-07:00 Metadata Date : 2012:08:16 10:10:02-07:00 Creator Tool : Adobe Acrobat Pro 9.0.0 Format : application/pdf Title : 슬라이드 1 Creator : auney Document ID : uuid:f4aa8015-c9dc-4430-97bc-7c7de1ba1335 Instance ID : uuid:0c05fee7-2d36-4e26-bb03-fcd43cbdca19 Producer : Adobe Acrobat Pro 9.0.0 Page Count : 54 Author : auneyEXIF Metadata provided by EXIF.tools