HYUNDAI MOBIS AV2A0CSAN CAR AVN (BLUETOOTH) User Manual 2 of 3
HYUNDAI MOBIS CO., LTD. CAR AVN (BLUETOOTH) Users Manual 2 of 3
Contents
- 1. Users Manual (1 of 3)
- 2. Users Manual (2 of 3)
- 3. Users Manual (3 of 3)
Users Manual (2 of 3)
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1444379 |
| Application ID | MfW3hHFnqpuCK5eCiR6Ieg== |
| Document Description | Users Manual (2 of 3) |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 448.15kB (5601873 bits) |
| Date Submitted | 2011-04-06 00:00:00 |
| Date Available | 2011-05-21 00:00:00 |
| Creation Date | 2011-03-18 18:45:57 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2011-04-06 14:57:55 |
| Document Title | Users Manual (2 of 3) |
| Document Creator | Adobe InDesign CS4 (6.0.5) |
(b) By city 8. Select the desired city name. 10. S elect the desired 1st street menu from NAVIGATION SYSTEM the list. 6. Press the City button. 9. I nput the name of the 1st street and press the 7. Input the city name and press the List List button. 11. Input the name of the 2nd street and press List If the number of matches with the input is the button. less than 4 results, then the street list screen If the number of matches with the input is If the number of matches with the input is will be displayed automatically. less than 4 results, then the street list less than 4 results, then the city list screen button. screen will be displayed automatically. will be displayed automatically. NAVIGATION SYSTEM 3-19 PART 3 NAVIGATION SYSTEM Searching a POI There are 3 ways to set the destination through POI search - (a) by category, (b) by name, (c) by phone number. 1. Press the DEST key. 12. Select the desired 2nd street menu from the list. 4. I nput the state name and press the 2. Press the POI Search button. List button. If the number of matches with the The corresponding position will be dis- input is less than 4 results, then the state list played on the map. screen will be displayed automatically. If there is only one matching result, then the state will automatically be changed without having to manually select the state. 3. Press the State button. 13. I f the selected 2nd street is within more than 2 cities, then the city list screen will be displayed. Select the desired city menu from the list. The corresponding position will be displayed on the map. 5. S elect the desired state from the list to change the state. 3-20 NAVIGATION SYSTEM (a) By category (a-1) Near current position Searches for facilities nearby the current posi- Searches for facilities within a 50 mi (80Km) tion or from the city center. radius of the current position. 9. Press the desired sub category menu. NAVIGATION SYSTEM 6. Press the Category button. 8. Press the desired main category menu. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command. "Find nearest POI" 10. Select the desired menu button. The corresponding position will be displayed on the map. [Find nearest POI], page 4-20. 7. P ress the Near current position button to search for facilities nearby the current position, or press the Near city center button to search for facilities in the near city center. NAVIGATION SYSTEM 3-21 PART 3 NAVIGATION SYSTEM (a-2) Near city center Searches for facilities from the city center. 10. Press the desired main category. 12. Select the desired menu button. The corresponding position will be displayed on the map. 8. Input the city name and press the List INFORMATION button. If the number of matches with the input is The distance on each POI item button refers less than 4 results, then the city list screen to the distance from the city center. will be displayed automatically. 11. Press the desired sub category. 9. Press the desired city menu. 3-22 NAVIGATION SYSTEM (b) By name ● Changing City 1. Press the City button. 2. Input the city name and press the List button. 3. Select the desired city name. 8. Select the desired POI menu. The corresponding position will be dis- 2. Select the desired main category menu. played on the map. 3. Select the desired sub category menu. INFORMATION (c) By phone number When necessary, the search conditions for the city and category can be changed by pressing the Advanced button. 7. I nput the name of the POI and press the List button. If the number of matches with the input is 6. Press the Phone # button. less than 4 results, then the facilities list screen will be displayed automatically. NAVIGATION SYSTEM 3-23 NAVIGATION SYSTEM 6. Press the Name button. ● Changing Category 1. Press the Category button. PART 3 NAVIGATION SYSTEM Searching from Address book 1. Press the DEST key. 2. Press the Address book button. 7. I nput the phone number and Press the Done 4. Select the desired address name from the list. button to complete. The corresponding position will be dis- The corresponding position will be played on the map. displayed on the map. [Registering new address in address Voice Command 1. Press the key on the steering wheel remote controller. book], page 3-43. 3. S elect the desired address book (user) menu. 2. After the beep sound, say a command. "Destination POI by Phone Number" [Destination POI by phone number], page 4-22. Voice Command 1. Press the INFORMATION This system provides 5 address books. Each addresses book can hold up to 200 entries. key on the steering wheel remote controller. 2. After the beep sound, say a command. "Destination by address book" [Destination by address book], page 4-24. 3-24 NAVIGATION SYSTEM Searching for Emergency facilities Voice Command 1. Press the 1. Press the DEST key. Searching your Home key on the steering wheel remote controller. 1. Press the DEST key. 2. After the beep sound, say a command. 2. Press the Emergency button. "Find emergency" [Find emergency ], page 4-23. 2. Press the HOME button. The Home position will be displayed on the map. HOME button will not be displayed. [Registering home address], page 3-48. 3. Select the desired facility category. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command. "Go home" [Go home], page 4-25. 4. Select the desired facility. The corresponding position will be displayed on the map. NAVIGATION SYSTEM 3-25 NAVIGATION SYSTEM INFORMATION If the Home address is not registered, then the PART 3 NAVIGATION SYSTEM Searching favorite places Searching from MAP Position the scroll mark at the destination by 1. Press the DEST key. scrolling the map on the map screen. 2. Select the desired button from 1 ~ 5 . Searching POI by local POI list The corresponding position will be displayed on the map. 1. P ress the POI ▼ button on the map screen. INFORMATION If the address of the Favorite place is not regis- The corresponding position will be dis2. Press the Others button. tered, then the 1 ~ 5 buttons without [Registering favorite place], page 3-49. 1. Press the 2. After the beep sound, say a command. key on the steering wheel "Find nearest " remote controller. [Find nearest ], page 4-21. 2. After the beep sound, say a command. page 4-25. 3-26 NAVIGATION SYSTEM key on the steering wheel remote controller. Voice Command "Destination by memory point <1 to 5>" [Destination by memory point <1 to 5>], played on the map. Voice Command registered addresses will be disabled. 1. Press the 4. Select the desired POI menu. 3. Press the Local POI lists button. Operating after searching a destination Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command. "Start guidance" (Sets the position of the scroll mark as the destination and begins route guidance.) Adding to address book : Saves the position in the address book. [Registering new address in address book], page 3-43. Voice Command 1. Press the key on the steering wheel remote controller. "Store Marked Location to " Changing destination position : Changes the position of the destination by scrolling the map. [Scrolling map], page 3-11. Setting as Destination / waypoint : Sets the position as the destination or waypoint. NAVIGATION SYSTEM 3-27 NAVIGATION SYSTEM 2. After the beep sound, say a command. PART 3 NAVIGATION SYSTEM Operating after setting a destination Voice Command 1. Press the Route guidance screen key on the steering wheel remote controller. 2. After the beep sound, say a command. "Time to destination" "Distance to destination" ● Symbol guidance mode : if the button is pressed, then the following route guid- Starting Route Guidance ance screen will be displayed. Press the Start Guidance button. Route Guidance will start. ● Route simulation • If the Start Guidance button is pressed and held for over 0.8 second, then the route simulation will start. • If the MAP VOICE key on the control panel is ● T urn-List mode : if the button is pressed during route simulation, then route pressed, then the following route guidance simulation will be terminated. screen will be displayed. 3-28 NAVIGATION SYSTEM Selecting other route 1. Press the Altrenative Route button. ● H ighway mode : if the button is ● H ighway junction mode : this route guid- ance screen is automatically displayed dur- screen will be displayed. ing guidance at highway junctions. Once guidance at a highway junction is complete, this screen will automatically disappear and the previous guidance screen 2. O ther routes can be selected by pressing the or buttons. will be restored. ● Intersection zoom mode : this route guidance screen is automatically displayed during guidance at an intersection. Once guidance at the intersection is complete, the screen will automatically disappear and the previous guidance screen will be restored. NAVIGATION SYSTEM 3-29 NAVIGATION SYSTEM pressed, then the following route guidance PART 3 NAVIGATION SYSTEM Route guidance Cancel Route: deletes destination, waypoints and terminates route guidance. Route menu screen and functions inishing route guidance (Delete Destination) [Finishing route guidance], page 3-30 . Route Overview: displays the entire route 1. Press the ROUTE key. and route detailed. [Route overview], page 3-31 . 2. Press the Cancel Route button. R oute Option: the route option can be changed. [Changing Route option], page 3-32 . Edit Waypoint: waypoints can be added/ deleted and the order can be changed. [Editing waypoints], page 3-32 . e Press the ROUTE key on the control panel. The ROUTE menu screen will be displayed. Detour : searches detour routes. [Setting detour distance], page 3-35 . Avoid Streets: searches routes which avoid the selected streets. [Setting avoid streets on route], page 3-35. 3-30 NAVIGATION SYSTEM 3. Press the Yes button. The destination and waypoints are deleted and the route guidance is terminated. [Finishing route guidance], page 3-30 . Voice Command 1. Press the Route overview (View Entire Route) key on the steering wheel remote controller. 1. Press the ROUTE key. 2. After the beep sound, say a command. "Cancel route" 2. Press the Route Overview button. (Terminates route guidance and deletes the set destination and waypoints.) 4. T he detailed route information can be NAVIGATION SYSTEM viewed 3. Press the Turn by Turn button. INFORMATION If the Return to guidance button is pressed, route guidance screen is displayed. NAVIGATION SYSTEM 3-31 PART 3 NAVIGATION SYSTEM Changing Route option Voice Command 1. Press the 1. Press the ROUTE key. key on the steering wheel remote controller. 2. After the beep sound, say a command. 2. Press the Route Option button. Editing waypoints Adding waypoints There are 2 ways to add waypoints - (a) "Replan recommended route" searching for POI nearest to the route, (b) "Replan shortest route" using advanced search. 1. Press the ROUTE key. 2. Press the Edit Waypoint button. 3. Press the button for the desired route guidance method. Guidance will be restarted after recalculating the route with the selected guidance method. 3. Press the Press to add new waypoint button. 3-32 NAVIGATION SYSTEM (a) Searching POI lists near route 8. Press the Add as Waypoint button. 7. Select the desired POI from the list. ress the Done button to complete. 9. P NAVIGATION SYSTEM 6. Select the desired sub category from list. 4. Press the Near POI Lists on Route button. 5. Select the desired category. The corresponding position will be dis- Guidance will restart after recalculating the played on the map. route. NAVIGATION SYSTEM 3-33 PART 3 NAVIGATION SYSTEM Re-ordering waypoints (b) Using advanced Search The method for searching waypoints through 1. Press the ROUTE key. the Advanced(more) button is the same method as searching destination. 2. Press the Edit waypoint button. [Searching a Destination], page 3-13. Deleting waypoints 4. Press the Yes button. 1. Press the ROUTE key. 2. Press the Edit waypoint button. 3. S elect the desired waypoint and use the Move ▲ , Move ▼ buttons to change the order. 5. After deleting, press the Done button to complete. Guidance will be restart after recalculating the route. 3. Select the waypoint and press the Delete button. 3-34 NAVIGATION SYSTEM 4. O nce re-ordering is complete, press the Done button to complete. Guidance will restart after recalculating the route. Setting detour distance Setting avoid streets on route 1. Press the ROUTE key. 1. Press the ROUTE key. 2. Press the Detour 2. Press the Avoid streets button. button. Guidance will restart after recalculating the detour route. 3. Select the desired streets to avoid( avoid, allow) and press the Done button to complete. Voice Command 1. Press the NAVIGATION SYSTEM 3. Select the desired detour range. Guidance will restarted after recalculating the route to avoid the selected streets. key on the steering wheel remote controller. 2. After the beep sound, say a command. "Detour <1 or 2 or 5 or 10> miles" "Detour <1 or 2 or 5 or 10> kilometers" NAVIGATION SYSTEM 3-35 PART 3 NAVIGATION SYSTEM Setup and Information Setup menu screen and functions H elp button : the help contents can be viewed. [Help], page 3-54 . Traffic Setup : sets to display traffic information on map, or to provide upcoming traffic information voice guidance, and or to display the detour route popup show- ing upcoming traffic information. Main button : changes to the input keyboard type, voice command feedback ON/ OFF settings and system initialization can be made. [Main setting], page 3-36 . Press the SETUP key on the control panel to display the setup menu screen. V o i c e S e t u p b u t t o n : a d j u s t s t h e Navigation guidance volume. [Voice guidance volume setting], page 3-51. Navigation button : navigation related settings can be set. [Navigation setting], page 3-38 . lock Setup button y Places button : the Address book, Home address, Favorite places, Previous destination can be edited. [My places setting], page 3-43 . 3-36 NAVIGATION SYSTEM Main setting Setting Language 1. Press the Change System information and update button. 1. Press the System Info button. 1. Press the SETUP key. 2. Press the Main button. Initializing system 1. Press the Factory Default button. 3. S elect the desired changes and press the Done button to complete. Setting keyboard for inputting letter Press the desired keyboard type button. The selection will be highlighted. 3. Press the Done button to complete. Setting voice command feedback ON/OFF Press the desired setting button. 2. Press the menu desired for initialization. NAVIGATION SYSTEM 3-37 NAVIGATION SYSTEM 2. Press the desired language. PART 3 NAVIGATION SYSTEM Navigation setting 1. Press the SETUP key. Registering avoid area 1. Press the Avoid Area button. 2. Press the Navigation button. 3. Press the Yes butto 2. Press the Add new avoid area button. 3. S elect the desired changes and press the Done button to complete. Setting units (mile/ km) Select the desired distance unit. 3. Set the start position of the avoid area and Setting arrival time and distance display Select the desired setting button. 3-38 NAVIGATION SYSTEM press the Next button. 4. S et the end position of the avoid area and button. 6. I f the Avoid area needs to be renamed, press the Rename button. 8. Each time the Avoid button is pressed, the function will switch between avoid ( )or allow( ). 9. Press the Done button to complete the setting. 5. Press the Done button to complete. 7. Rename the Avoid area and Press the Done button to complete. NAVIGATION SYSTEM 3-39 NAVIGATION SYSTEM press the Next PART 3 NAVIGATION SYSTEM Editing avoid area 1. Press the Avoid area button. 4. I f the Avoid area needs to be renamed, press the Rename button. 6. Each time the Avoid button is pressed, the function will switch between avoid( )or allow( ). 2. Press the Edit avoid area button. 7. P ress the Done button once editing is complete. 5. R ename the Avoid area and press the Done 3. Select the Avoid area button to edit. 3-40 NAVIGATION SYSTEM button to complete. Deleting avoid area Deleting all avoid areas 1. Press the Avoid area button. 1. Press the Avoid area button. 4. Press the Delete button. 2 . Press the Delete all avoid area button. 5. Press the Yes button. 3. Select the Avoid area button to delete. 3. Press the Yes button. NAVIGATION SYSTEM 3-41 NAVIGATION SYSTEM 2. Press the Edit avoid area button. PART 3 NAVIGATION SYSTEM Setting Q.POI icons Setting estimate travel time 1. Press the Edit Q.POI button. 1. Press the Travel Time button. 4. Select the desired sub category. 2. Select the desired menu. 2. P r e s s t h e or button on the Residential, Main street, and Freeway controls to adjust the speed. Pre s s t h e Default b u t to n to s e t t h e speeds to the default settings. 5. Press the Done button to complete. 3. Press the Done button to complete the set- INFORMATION Q.POI stands for Quick POI and refers to the 3. Select the desired category. function which turns POI icon display on or off on the map. 3-42 NAVIGATION SYSTEM ting. My places setting 3. Press the Add to Address Book button. Registering new address in address book (b) by registering in the address book 1. Press the SETUP key. There are 3 ways to register a new address in 2. Press the My Places button. the address book - (a) by DEST menu, (b) by registering address in address book, (c) from map scroll. ress the desired address book (user) but4. P 1. Press the DEST key. ton. 2. Search through the desired method. The search process is the same as the meth- 3. Press the Address Book button. od for destination search. [Searching a destination], page 3-13. 5. Input the name and telephone information and press the Done button to complete. [Editing an address of address book], page 3-45. 4. Press the desired address book (user) button. NAVIGATION SYSTEM 3-43 NAVIGATION SYSTEM (a) by DEST menu PART 3 NAVIGATION SYSTEM 7. Input the name and telephone information and press the Done button to complete. [Editing an address of address book], page 3-45. (c) from map scroll 5. Press the New Address button. 1. I n the map screen, scroll the map to the desired position. 3. Press the desired address book (user) button. 4. Input the name and telephone information and press the Done button to complete. [Editing an address of address book], page 3-45. ress the Address button to search the 6. P address. [Searching an address], page 3-13. INFORMATION Press the Store current position button to input the address of the current position. 3-44 NAVIGATION SYSTEM 2. Press the Add to Address Book button. Editing an address of address book 1. Press the SETUP key. 2. Press the My Places button. 5. Select the desired address to edit. 7. I nput the address name and press the 3. Press the Address Book button to complete. button. 6. P ress the Name address name. button to input the 8. Press the Address button to search the address. The process is the same as the method for searching an address. [Searching an Address] , page 3-13. INFORMATION 4. S elect the desired address book (user) button . Press the Store current position button to input the address of the current position. NAVIGATION SYSTEM 3-45 NAVIGATION SYSTEM Done PART 3 NAVIGATION SYSTEM 9. P ress the Phone button to input the Deleting an address of address book phone number. 1. Press the SETUP key. 2. Press the My Places button. 5. S elect the desired address button to delete. 10. I nput the phone number and press the Done button to complete. 3. Press the Address Book button. 6. Press the Delete 11. Press the Done button to complete. 4. Select the desired address book (user) button. 3-46 NAVIGATION SYSTEM button. Deleting an address book 1. Press the SETUP key. 2. Press the My Places button. 7. Press the Yes button. 4. Press the Delete all Address Book NAVIGATION SYSTEM 3. Press the button. button. 5. Press the Yes button. 4. Press the desired address book (user) button. NAVIGATION SYSTEM 3-47 PART 3 NAVIGATION SYSTEM Registering home address INFORMATION Deleting home address Press the Store current position button to reg1. Press the SETUP key. ister the current position as Home. 1. Press the SETUP key. 2. Press the My Places button. 5. Search the address. 2. Press the My Places button. The process is the same method as searching an address. [Searching an Address], page 3-13. 3. Press the Home Address button. 3. Press the Home Address button. 6. Press the Done button to complete. 4. Press the Search Address button. 3-48 NAVIGATION SYSTEM 4. Press the Delete button. Registering favorite place 1. Press the SETUP key. 2. Press the My Places button. 5. Press the Yes button. 5. Press the Search Address button. ister the current position as a Favorite place. 3. Press the Favorite Places button. 6. Search the address. The process is the same as the method for searching an address. [Searching an Address], page 3-13. 4. Press the number of the Favorite Place to register. NAVIGATION SYSTEM 3-49 NAVIGATION SYSTEM INFORMATION Press the Store current position button to reg- PART 3 NAVIGATION SYSTEM Deleting favorite place 1. Press the SETUP key. 2. Press the My places button. 7. Press the Done button to complete. 5. Press the Delete button. 3. Press the Favorite Places button. 6. Press the Yes button. 4. S elect the desired favorite place button to delete. 3-50 NAVIGATION SYSTEM Voice guidance volume setting Voice guidance volume control ● Set 1. Press the SETUP key. Adaptive volume control ON/OFF the desired volume level by using the or buttons and press the Listen ● Press the desired setting button. button to verify the volume level. 2. Press the Voice Setup button. INFORMATION Voice Command 1. Press the Adaptive Volume Control key on the steering wheel If the speed of the vehicle is over approximately 60 mi/h (100km/h), the volume level remote controller. can be increased one level higher than the "Voice Guidance Louder" current level. If the speed of the vehicle falls "Voice Guidance Softer" under 60 mi/h (100km/h), the volume level will return to its original level. ● Press the Mute button when voice guid- ance is unnecessary. Voice guidance can be turned back on by pressing the the Mute or buttons or pressing button. Voice Command 1. Press the key on the steering wheel remote controller. 2. After the beep sound, say a command. "Voice Guidance On" "Voice Guidance Off" NAVIGATION SYSTEM 3-51 NAVIGATION SYSTEM 2. After the beep sound, say a command. PART 3 NAVIGATION SYSTEM Traffic Setup Traffic Information INFORMATION ● T raffic 1. Press the SETUP key. (a) Viewing Traffic Information 2. Press the Traffic Setup button. ● Displays the traffic information around vehi- 3. S elect the desired changes and press the Done information will be shown on the map up until the scale is ~4mile. cle for up to a radius of 50 miles. (Information exceeding 50 miles will not be button. displayed) ● T he above list can be sorted by either Distance (Default) or Category. 1. When the Traffic option is active, press the button on the Map screen. INFORMATION Traffic Flow INFORMATION ● Display Traffic and Flow data on Map : select whether to display traffic information on the map. ● Voice Prompt for traffic and flow warning : Normal, Free Flowing (46 mph ~) Moderate Congestion (26 ~ 45 mph) Heavy Traffic, Stop and Go (0 ~ 25 mph) select whether to provide voice guidance in Road Construction front of Traffic Information. (On route - Accident 3mile) Congestion/Slow Traffic ● D isplay Detour pop-up message : select Incient whether to display Detour pop up in front Hazardous Road Conditions of Traffic Information. (On route - 3mile) Travel Information 3-52 NAVIGATION SYSTEM 2. Select the desired List button. 3. The user can check points of accidents and the six menus, press the Done NAVIGATION SYSTEM traffic details. 2. After selecting the desired menu among button to save. Once returning to the previous List (b) Changing Traffic Category screen, the corresponding Category list will be shown and maintained until Category information is changed. 1. Press the Advabed button at No. 2. NAVIGATION SYSTEM 3-53 PART 3 NAVIGATION SYSTEM Help 1 . Press the SETUP key. 4 . Press the desired Help menu button. 2 . Press the Help button. 5 . T he full content of the help section can be viewed by using the top-down scroll buttons. 3 . Press the Navigation button. 3-54 NAVIGATION SYSTEM PART 4 VOICE COMMAND SYSTEM Operating voice command …………… 4-2 Command list of Navigation system… ……… 4-14 Condition for voice command system……… 4-2 Map……………………………………… 4-14 Basic operation for voice Destination……………………………… 4-15 command control… ……………………… 4-2 Destination……………………………… 4-16 Voice command Help……………………… 4-3 Route… ………………………………… 4-16 Others…………………………………… 4-17 Setting up the voice command system …4-4 POI Category list………………………… 4-18 Searching destination by Speaker adaptation… …………………… 4-4 voice command… ………………………… 4-19 Find address… ………………………… 4-19 Voice command list …………………… 4-6 Find nearest POI………………………… 4-20 Command list of Help… ………………… 4-6 Find nearest ……………… 4-21 Command list of Audio system…………… 4-7 Destination POI by phone number… … 4-22 FM/AM Radio… ………………………… 4-7 Find emergency … ……… 4-23 SIRIUS Radio… ………………………… 4-8 Destination by address book…………… 4-24 CD… …………………………………… 4-9 Previous destination… ………………… 4-24 MP3……………………………………… 4-10 Previous start point… ………………… 4-25 USB MP3………………………………… 4-11 Go home………………………………… 4-25 USB IMAGE……………………………… 4-12 Destination by memory iPod……………………………………… 4-12 point <1 to 5>… ……………………… 4-25 Others…………………………………… 4-13 VOICE COMMAND SYSTEM 4-1 VOICE COMMAND SYSTEM Setting voice Prompt ON/OFF… ………… 4-4 PART 4 VOICE COMMAND SYSTEM Operating voice command Condition for voice command system Basic operation for voice command control Most of the functions within the Audio and Navigation system can be operated by voice. Please follow the following instructions for 2. O nce the optimal voice recognition performance. icon changes into the icon on the pop-up screen with a beep sound, say the desired voice command (ex : ● Close all windows and the sunroof. The per- 1. Press the key on the steering wheel previous destination) formance of the voice recognition can be remote controller. A voice command win- improved if the environment of the car inte- dow will be displayed on the lower side of [Voice command list], page 4-6. [Searching destination by voice com- rior is quiet. the screen followed by a "Command mand], page 4-19. ● Press the voice recognition button and say please" system voice comment. the desired voice command after the sound INFORMATION of the beep. ● T he If the exact command is not known, use the microphone is positioned above the The System voice comment "Command driver so that voice commands can be spo- Please" will not be provided when the Voice ken while maintaining a proper posture. prompt is turned OFF. ● Pronounce the voice commands naturally and clearly as if in a normal conversation. "Help" command to view the commands list in detail. INFORMATION Press the key shortly to input a voice command from among the system voice comments. The system voice instruction comment will immediately terminate. When the icon changes into the icon with a beep sound, input the desired voice command. 4-2 VOICE COMMAND SYSTEM Voice command Help INFORMATION The "help" command can be used even while key on the steering wheel voice recognition dialogue is operating. At remote controller. A voice command win- such time, help instructions appropriate to dow will be displayed on the lower side of the state of the dialogue will be provided. 1. Press the the screen followed by a "Command please" system voice comment. 3. The inputted command is fed back to the screen and voice system. If the command was not recognized properly, say "Back". INFORMATION The System voice comment "Command Please" will not be provided when the Voice ● T he prompt is turned OFF. commands which can currently be inputted are displayed on the screen in yellow. ●T o for over 0.8 second. ●B e icon changes into the icon on the pop-up screen with a beep sound, terminate the voice recognition system, either say "cancel" or press the 2. Once the 3. Say the name of the desired menu. (ex : "Destination help") say "Help". If the proper Help menu is already known, voice commands, such as "destination help" can be inputted directly. aware that during the operation of the voice recognition system, pressing the hard keys or the screen will terminate the voice recognition system. 4. Say the desired voice command. VOICE COMMAND SYSTEM 4-3 VOICE COMMAND SYSTEM INFORMATION PART 4 VOICE COMMAND SYSTEM Speaker adaptation Setting up the voice command system INFORMATION Setting voice Prompt ON/OFF Speaker adaptation will improve performance of voice recognition system to a particular ● Voice user voice. This will degrade the performance prompt ON : all system prompts are for other users. provided. ● Voice prompt OFF : most of the system prompts are not provided. 3. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice Prompt on". 1. Press the 1. Press the key on the steering wheel remote controller. key on the steering wheel remote controller. INFORMATION In the Voice Setup Help screen, the com- 2. O nce the icon changes into the mands possible for input within the current icon on the pop-up screen with a beep mode are displayed. For example, if the Voice sound, say "Voice setup." The "voice prompt prompt is currently in Off state, then the com- on" or "voice prompt off" can be directly mand Voice prompt ON will be displayed on inputted if the current state is already the screen. known. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice setup." Or the "Speaker adaptation" command can be directly inputted. 3. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Speaker adaptation". 4-4 VOICE COMMAND SYSTEM ● Reset Speaker adaptation: Returns to previ- ous state prior to applying Speaker adaptation. 1. Press the key on the steering wheel remote controller. 4. Once the icon changes into the icon 2. O nce the icon changes into the on the pop-up screen with a beep sound, icon on the pop-up screen with a beep say "Yes". sound, say "Reset Speaker adaptation". VOICE COMMAND SYSTEM 5. L isten and repeat the 20 commands (approximate) as instructed by the device. VOICE COMMAND SYSTEM 4-5 PART 4 VOICE COMMAND SYSTEM Voice command list Command list of Help The voice commands for this system are divided into Global commands and Local commands. ● G lobal command () : Commands which operate in all operating modes. ● L ocal command () : Commands which operate only when the corresponding mode is operating or when the mode screen to the corresponding mode is displayed. 4-6 VOICE COMMAND SYSTEM Command Operation ● Help Displays the main Help screen. ● Destination Help Displays the Destination related command list. ● Map Help Displays the Map related command list. ● Radio Help Displays the FM/AM radio related command list. ● SIRIUS Help Displays the SIRIUS radio related command list. ● Disc Help Displays the DISC mode related command list for the disc inserted in the CD Player. ● iPod Help Displays the iPod related Command list. ● USB Help Displays the USB related command list. ● Phone Help Displays the Phone help screen. ● Voice setup Help Displays the Voice prompt settings and speaker-adaptive commands on the screen. Command list of Audio system FM/AM Radio Command Operation Radio Plays the most recent frequency for the most recently operated band. ● (Radio) AM Plays the most recent frequency for the corresponding band. ● (Radio) FM lays the most recent frequency for the corresponding band. In the case of FM, the most recent frequency within the most recently played FM1 or FM2 band is played. ● FM <1 or 2> Plays the most recent frequency for the corresponding band. ● AM frequency <530 to 1710> (ex. AM frequency 1310) Plays the desired AM band frequency. ● FM frequency <87.5 to 107.9> (ex. FM frequency 99.1) Plays the desired FM band frequency. ● AM Preset <1 to 6> Plays the desired AM band preset frequency. ● FM <1 or 2> Preset <1 to 6> Plays the desired preset frequency of FM1 or FM2 band. ○ Preset <1 to 6> Plays the desired preset frequency for the current band. ○ Seek Up Searches and plays the next frequency of the current band. ○ Seek Down Searches and plays the previous frequency of the current band. ○ Preset Up Plays the next preset frequency of the current band. ○ Preset Down Plays the previous preset frequency of the current. ○ Scan Scans all frequencies within the current band. ○ Preset Scan Scans the 6 preset frequencies of the current band. VOICE COMMAND SYSTEM ● VOICE COMMAND SYSTEM 4-7 PART 4 VOICE COMMAND SYSTEM SIRIUS Radio Command Operation ● SIRIUS Plays the last channel within the last band from SIRIUS1, SIRIUS2, and SIRIUS3. ● SIRIUS <1 or 2 or 3> Plays the most recent channel for the corresponding Band. ● SIRIUS Channel <0 to 223> Plays the desired SIRIUS band channel. ● SIRIUS <1 or 2 or 3> Preset <1 to 6> Plays the desired preset channel for SIRIUS1 or SIRIUS2 or SIRIUS3 band. ○ Channel < 0 to223 > Plays the desired channel of the current band. ○ Preset <1 to 6> Plays the desired preset channel of the current band. ○ Channel Up Plays the next channel of the current band. ○ Channel Down Plays the previous channel of the current band. ○ Preset Up Plays the next preset channel of the current band. ○ Preset Down Plays the previous preset channel of the current band. ○ Scan Scans all channels within the current band. ○ Preset Scan Scans all preset channels within the current band. 4-8 VOICE COMMAND SYSTEM CD Command Operation DISC Plays the DISC already inserted in the CD Player. ● CD If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played. ● CD track <1 to 665> If the DISC inserted in the CD Player is a CD, then CD Mode will start and plays the desired track. ○ Track <1 to 665> Plays the desired track. ○ Next track Plays the next track. ○ Previous track Plays the previous track. ○ Scan Scans all tracks on the CD DISC. ○ Repeat track Repeats the current playing track. ○ Random Plays the tracks of the CD DISC in random order. ○ Normal play Turns off the Scan, Repeat, and Random functions. ○ Pause Pauses the CD. ○ Play The command will only be enabled when the CD is paused. VOICE COMMAND SYSTEM ● VOICE COMMAND SYSTEM 4-9 PART 4 VOICE COMMAND SYSTEM MP3 Command Operation ● DISC Plays the DISC already inserted into the CD Player. ● CD If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played. ● MP3 If the DISC inserted in the CD Player is an MP3 DISC, then the MP3 will be played. ○ Next file Plays the next file. ○ Previous file Plays the previous file. ○ Next folder Plays the first file in the next folder. ○ Previous folder Plays the first file in the previous folder. ○ Scan Scans all files within the MP3 DISC. ○ Folder Scan Plays all songs in the folder in which the current playing file is located for 10 seconds each. ○ Repeat File Repeats the current playing file. ○ Repeat Folder Repeats all tracks within the current playing folder. ○ Random Plays all files within the MP3 DISC in random order. ○ Random Folder Plays all files within the current playing folder in random order. ○ Normal play Turns off the Scan, Repeat, and Random functions. ○ Pause Pauses the MP3 DISC. ○ Play The command will only be enabled when the MP3 DISC is paused. 4-10 VOICE COMMAND SYSTEM USB MP3 Command Operation USB If the USB has been connected to the device, plays the MP3 files within the USB. ○ Next file Plays the next file. ○ Previous file Plays the previous file. ○ Next folder Plays the first chapter of the next folder. ○ Previous folder Plays the first chapter of the previous folder. ○ Scan Scans all files within the USB. ○ Folder Scan Plays all songs in the folder in which the current playing file is located for 10 seconds each. ○ Repeat File Repeats the current playing file. ○ Repeat Folder Repeats all songs within the current playing folder. ○ Random Plays all files within the USB in random order. ○ Random Folder Plays all files within the current playing folder in random order. ○ Normal play Turns off the Scan, Repeat, and Random functions. ○ Pause Pauses the USB. ○ Play The command will only be enabled when the USB is paused. VOICE COMMAND SYSTEM ● VOICE COMMAND SYSTEM 4-11 PART 4 VOICE COMMAND SYSTEM USB IMAGE Command Operation ● USB If the USB IMAGE has been connected to the device, plays the image files within the USB. ○ Next Image Moves to the next Image. ○ Previous Image Moves to the previous Image. ○ Next folder Moves to the next folder. ○ Previous folder Moves to the previous folder. iPod Command Operation ● iPod Plays the songs within the iPod if the iPod has been connected to the device. ○ Next song Plays the next song. ○ Previous song Plays the previous song. ○ Repeat song Repeats the current playing song. ○ Random Plays all songs within the iPod in random order. ○ Random Album Plays all songs within the current playing album in random order. ○ Normal play Turns off the Repeat and Random functions. ○ Pause Pauses the iPod. ○ Play The command will only be enabled when the iPod is paused. 4-12 VOICE COMMAND SYSTEM Others Command Operation ● Line in Plays the unit connected with the AUX terminal. ● Audio on Turns on the Audio/Video. ● Audio off Turns off the Audio/Video. Command list of Phone Operation ● Call Name Makes the call to the name. ● Dial Number makes the callto the number. ● Redial The recently called number is redialed. ● Recent Calls The user can select a number from the outgoing, incoming, and missed calls. VOICE COMMAND SYSTEM 4-13 VOICE COMMAND SYSTEM Command PART 4 VOICE COMMAND SYSTEM Command list of Navigation system Navigation commands will operate only agreeing to the terms and conditions for the Navigation system. Map Command Operation ● Map Current location Displays the current position of the vehicle. ● Zoom In Decreases the map zoom by one level. ● Zoom Out Increases the map zoom by one level. ● Zoom minimum Displays the map screen in the maximum zoom level. ● Zoom maximum Displays the map screen in the minimum zoom level. ● Zoom level <1 to 14> Displays the map in the zoom level selected from the 14 levels. ● Zoom Displays the map in the corresponding zoom. 150 feet / 50 meters 300 feet /100 meters 700 feet / 200 meters 0.25 miles / 400 meters 0.5 miles / 800 meters 1 mile / 1.6 kilometers 2 miles / 3.2 kilometers 4 miles / 6.4 kilometers 8 miles / 12 kilometers 16 miles / 25 kilometers 32 miles / 50 kilometers 64 miles / 100 kilometers 130 miles / 200 kilometers 250 miles / 400 kilometers (ex.Zoom 0.25 miles, zoom 400 meters) 4-14 VOICE COMMAND SYSTEM Command Operation ○ North up Displays the map in North Up mode. ○ Heading up Displays the map in Heading Up mode. ○ Show (ex. Show ATM) Displays the selected POI categories. [POI Category list], page 4-18. ○ Hide (ex. Hide ATM) Hides the selected POI categories. [POI Category list], page 4-18. ○ Hide all Hides all POI categories. ○ Daylight mode Converts the map display into daylight mode. ○ Night mode Converts the map display into night mode. ○ Auto mode Converts the map display is between daylight/night modes automatically. Command Operation ● Find address Sets the destination through address search for route guidance. ● Find nearest POI Sets a POI near the current position as the destination for route guidance through POI category search. ● Find nearest S ets a POI near the current position as the destination by directly inputting the POI name for route guidance. [POI Category list], page 4-18. ● Destination POI by phone number Sets the destination by searching the phone number of the facility. ● Find Emergency (ex. Find Emergency Hospital) S earches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. ● Destination by address book S ets one of the list of previously registered addresses in the address book for the user as the destination. VOICE COMMAND SYSTEM 4-15 VOICE COMMAND SYSTEM Destination PART 4 VOICE COMMAND SYSTEM Destination Command Operation ● Previous destination Sets one of the previous destination as the current destination. ● Previous start point Sets the previous start point as the current destination. ● Go home Sets the previously registered home address as the destination for route guidance. ● Destination by memory point <1 to 5> Sets a previously registered memory point as the destination for route guidance Route Command Operation ● Cancel route Deletes the designated destination and terminates the route guidance. ● Repeat voice guidance Repeats the route guidance. ● Detour <1 or 2 or 5 or 10> miles Searches detour routes within a <1|2|5|10> mile radius. ● Detour <1 or 2 or 5 or 10> kilometers Searches detour routes within a <1|2|5|10> kilometer radius. ● Replan recommended route Recalculates the route with the recommended route. ● Replan shortest route Recalculates the route with the shortest route. ● Distance to destination Reports the remaining distance until destination by voice. ● Time to destination Reports the remaining time until destination by voice. ○ View route If the destination has been set, displays the whole route screen until the destination. ○ Start guidance Sets the scroll mark displayed on the map as the destination and starts route guidance. 4-16 VOICE COMMAND SYSTEM Others Command Operation ● Voice guidance on Turns the Voice Guidance On. ● Voice guidance off Turns the Voice Guidance Off. ● Voice guidance louder Increases the Voice Guidance volume by 1 level. ● Voice guidance softer Decrease the Voice Guidance volume by 1 level. ● Store marked location to (ex. Store marked location to user 1) Registers the selected location into the selected Address book. VOICE COMMAND SYSTEM VOICE COMMAND SYSTEM 4-17 PART 4 VOICE COMMAND SYSTEM POI Category list All restaurants Fast Food restaurant American restaurant French restaurant Italian restaurant Continental restaurant Mexican restaurant Japanese restaurant Chinese restaurant Korean restaurant Vegetarian Food restaurant Seafood restaurant Latin American restaurant Asian restaurant African restaurant Coffee Shop Other restaurants All automotive Gas Station Parking Auto service Road Assistance Kia Dealership Automobile Dealership Auto Parts Rest Area 4-18 VOICE COMMAND SYSTEM Car Wash Motorcycle Dealership All Travel Airport Hotel Tourist Information Travel Agent Tourist Attraction City Cnter Rental Car Agency Campground Ferry Terminal Bus Station Local Transit Train Station All Shopping Department Store Convenience Store Shopping Center Music Store Grocery Store Bookstore Electronics Store Hardware Store Gifts shop Sporting Goods store Home Specialty Store Clothing shop Shoe Store Pharmacy All Recreation Amusement Park Museum Cinema Sports Activities Sports Complex Golf Course Winery Video & Game Rental Ski Resort Recreation Area Other Recreation All Financial Service Bank ATM Check Cashing Service Money Transfer Business Facility All Community Police Station Post Office Library Court House Fire Department Convention Center City Hall Civic Center School Government Offices Waste & Sanitary Utilities All Services Hospital Dentist Photography Tax Service Medical Service Attorney Funeral Director Hair & Beauty Cleaning & Laundry Social Service Physician Communication services Tailor & Alteration Mover services Searching destination by voice command Find address Sets the destination through address search for route guidance. 1. P ress the key on the steering wheel 4. Say the state name. 6. Say the street name. 5. Say the city name. 7. S ay the House number. Here, the range remote controller. 2. Once the icon changes into the icon say "Find address". which can be inputted will be displayed. 8. S ay "Start guidance" if guidance to the selected position is desired, or say "Show 3. Say "Change state" to change the state. map" to verify the location of the selected position on the map. VOICE COMMAND SYSTEM 4-19 VOICE COMMAND SYSTEM on the pop-up screen with a beep sound, PART 4 VOICE COMMAND SYSTEM INFORMATION Pick-List(n-best list) Spell recognition Find nearest POI Sets a POI near the current position as the destination for route guidance through POI category search. 1. P ress the key on the steering wheel remote controller. ● If there are more than one voice result, then ● It is possible to search the state, city, street names through the text line inputted by the user. ● To enter spell search mode, say the "Spell state, city, street names" command as displayed on the screen. ● Text lines can be inputted continuously. 2. O nce the icon changes into the a pick-list which can be selected by the user icon on the pop-up screen with a beep will be displayed. sound, say "find nearest POI". ● There may be more than one list page. The desired page can be viewed by using commands such as "next page" or "previous page". ● Here, the "Line + number" voice command can be used to select the desired result, such as "Line one". Pressing the desired result is not supported. ● Also, selectable areas will be highlighted in yellow, allowing the user to easily see which results can be selected. 4-20 VOICE COMMAND SYSTEM 3. Select the desired main category. Find nearest Sets a POI near the current position as the destination by directly inputting the POI name for route guidance. 1. Press the 4. Select the desired sub category. 6. S ay "Start guidance" if guidance to the key on the steering wheel remote controller. selected position is desired, or say "Show map" to verify the location of the selected position on the map. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, 5. S elect the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1". 3. Select the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1". VOICE COMMAND SYSTEM 4-21 VOICE COMMAND SYSTEM say "Find nearest Parking". PART 4 VOICE COMMAND SYSTEM Destination POI by phone number INFORMATION Continuous recognition of phone numbers is Sets the destination by searching the phone possible, and the recognized result will be dis- number of the facility. played in block units. To correct a block unit, say "correct". To delete the entire result, say 1. Press the key on the steering wheel "delete". To have the input read back, say "repeat". remote controller. 4. S ay "Start guidance" if guidance to the selected position is desired, or say "Show 2. O nce the icon changes into the icon map" to verify the location of the selected on the pop-up screen with a beep sound, position on the map. say "Destination POI by Phone number". 4. Say "Show list" to view the resulting search list. 3. Input the 10 numbers for the phone number. 4-22 VOICE COMMAND SYSTEM 5. Select the desired location from the list and say the line command. Find emergency : Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. 1. Press the key on the steering wheel 4. S ay "Start guidance" if guidance to the selected position is desired, or say "Show remote controller. map" to verify the location of the selected 6. S ay "Start guidance" if guidance to the 2. O nce the icon changes into the icon on the pop-up screen with a beep sound, map" to verify the location of the selected say the voice command. position on the map. ex)“Find emergency hospital” position on the map. VOICE COMMAND SYSTEM selected position is desired, or say "Show 3. Select the desired location from the list and say the line command. VOICE COMMAND SYSTEM 4-23 PART 4 VOICE COMMAND SYSTEM Destination by address book Previous destination Sets one of the list of previously registered Sets one of the previous destination as the addresses in the address book for the user as current destination. the destination. 1. P ress the 1. P ress the key on the steering wheel key on the steering wheel remote controller. remote controller. 4. Select the desired location from the list and 2. O nce the icon changes into the icon say the line command. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Previous destination". on the pop-up screen with a beep sound, say "Destination by address book". 5. S ay "Start guidance" if guidance to the selected position is desired, or say "Show 3. Select the desired user name(Address book name). 4-24 VOICE COMMAND SYSTEM map" to verify the location of the selected position on the map. 3. Select the desired location from the list and say the line command. Previous start point Go home Sets the previous start point as the current Sets the previously registered home address destination. as the destination for route guidance. 1. P ress the key on the steering wheel remote controller. 4. S ay "Start guidance" if guidance to the 2. Once the icon changes into the 1. P ress the key on the steering wheel remote controller. icon 2. O nce the icon changes into the icon selected position is desired, or say "Show on the pop-up screen with a beep sound, on the pop-up screen with a beep sound, map" to verify the location of the selected say "Previous start point". say "Go home". position on the map. Sets a previously registered memory point as the destination for route guidance. 1. P ress the key on the steering wheel remote controller. 3. Say "Start guidance" if guidance to the 2. O nce the icon changes into the icon selected position is desired, or say "Show on the pop-up screen with a beep sound, map" to verify the location of the selected say "Destination by memory point 1". position on the map. VOICE COMMAND SYSTEM 4-25 VOICE COMMAND SYSTEM Destination by memory point <1 to 5> PART 5 BLUETOOTH® HANDSFREE PART 5 BLUETOOTH® HANDSFREE Before using the Bluetooth® Handsfree… ……………………………… 5-2 Bluetooth® Handsfree screen layout…… 5-9 Operating menus during a call… …… 5-14 Bluetooth® Handsfree screen and Switching call to the mobile phone… ……… 5-14 What is Bluetooth®?… ……………………… 5-2 functions……………………………………… 5-9 hen there is no mobile phone Activating Call waiting… …………………… 5-14 Functions supported by Bluetooth® Handsfree… …………………… 5-2 Ending a call… ……………………………… 5-15 connected… ……………………………… 5-9 When a mobile phone is connected……… 5-9 Phone Book… ………………………… 5-16 Converting Bluetooth® Handsfree mode… …………………………………… 5-2 When receiving an incoming call… ……… 5-10 Making a call from the Phone book… ……… 5-16 When already on a call… ………………… 5-10 Searching the Phone Book…………………… 5-17 Converting from Audio/Navigation mode to When there is a call waiting … …………… 5-10 Searching by name … …………………… 5-17 Bluetooth® Handsfree mode… ……………… 5-2 Searching by number … ………………… 5-18 Converting from Bluetooth® Handsfree Making a call…………………………… 5-11 mode to Audio/Navigation mode…………… 5-3 Making a call by dialing a phone Call History List………………………… 5-19 number… …………………………………… 5-11 Making a call from Call history… …………… 5-19 Making a call from Speed Dial… …………… 5-11 Sorting call history…………………………… 5-19 Making a call by redialing… ………………… 5-12 Dialed number … ………………………… 5-20 Pairing and connecting a Bluetooth® phone……………………………………… 5-4 Received number… ……………………… 5-20 Pairing a mobile phone… …………………… 5-4 Deleting a paired phone… ………………… 5-6 Answering a call… …………………… 5-13 Connecting a mobile phone… ……………… 5-7 Answering an incoming call… ……………… 5-13 Disconnecting a mobile phone……………… 5-8 Rejecting an incoming… …………………… 5-13 Missed number… ………………………… 5-20 PART 5 BLUETOOTH® HANDSFREE Phone Music… ………………………… 5-21 Important information … …………… 5-30 Before playing Phone music… ……………… 5-21 About pairing mobile phones… …………… 5-30 Starting Phone Music………………………… 5-21 About making/answering phone calls… …… 5-31 Phone music screen layout… ……………… 5-22 About Bluetooth® device environment……… 5-31 Selecting Phone music files… ……………… 5-23 Bluetooth® settings…………………… 5-24 Pairing and connecting a mobile phone……… 5-24 Setting mobile phone auto connect priority… …………………………………… 5-24 Setting Handsfree volume…………………… 5-25 Setting Audio streaming… ………………… 5-25 BLUETOOTH® HANDSFREE Advanced settings…………………………… 5-26 Setting Contacts Auto Download (Sync)… …………………………………… 5-27 Searching and modifying my device properties… ……………………………… 5-27 Changing passkey… ……………………… 5-28 Deleting all paired phones… …………… 5-28 Initializing Bluetooth® handsfree… ……… 5-29 BLUETOOTH® HANDSFREE 5-1 PART 5 BLUETOOTH® HANDSFREE Before using the Bluetooth® Handsfree What is Bluetooth®? Functions supported by Bluetooth® Handsfree Converting Bluetooth® Handsfree mode Converting from Audio/Navigation mode to Bluetooth® Handsfree ● Pairing mobile phones (Up to 5 phones) ● Connecting/disconnecting mobile phones ● Bluetooth® allows wireless transmission of ● Making/Answering phone calls information between PC, mobile phones, ● Downloading a Phone Book headsets, PDAs, printers and other devices ● Downloading a Call history list within close ranges by using 2.45Ghz fre- ● Playing quency short-distance wireless telecommu- music saved in a Bluetooth® phone in the vehicle nication technologies. ● Within this vehicle, users can make hands- free calls, transmit mobile phone data, and Some functions may not be supported in some mobile phone. play audio streaming files by connecting a mobile phone with the system. hile in Audio mode or Navigation mode, 1. W press the PHONE key or the the steering wheel. Bluetooth® is a trademark owned by Bluetooth® SIG, Inc. 5-2 BLUETOOTH® HANDSFREE key on Converting from Bluetooth® Handsfree mode to Audio/ Navigation mode INFORMATION Most of the functions of the Audio or SETUP modes are not suppor ted while on a Bluetooth® Handsfree call. The call volume and Navigation (MAP VOICE, DEST, ROUTE) screens can be operated. 2. T he system will change to Bluetooth® Handsfree mode and display the PHONE screen. hile in Bluetooth® Handsfree mode, press 1. W an Audio/Navigation mode key, such as FM/AM or MAP VOICE . BLUETOOTH® HANDSFREE 3. The following screen will become displayed if no mobile phone has been connected. 2. The corresponding mode will be displayed. BLUETOOTH® HANDSFREE 5-3 PART 5 BLUETOOTH® HANDSFREE Pairing and connecting a Bluetooth® phone Pairing a mobile phone 3. T he list of currently paired phones will be displayed. Press the Add to button to pair a new mobile phone. 4. F rom the Bluetooth® device list within the mobile phone, add the car handsfree. The default name of the car system is KIA MOTORS. INFORMATION 1. Press the Settings button on the PHONE screen. For more information on registering For safety reasons, pairing a Bluetooth® phone Bluetooth® devices from the mobile phone, is not possible when the vehicle is in motion. please refer to the mobile phone user's Park the vehicle in a safe location to pair a manual. new phone. It is possible to pair up to five mobile phones. In order to pair a new phone INFORMATION when there are already five mobile phones While conducting a Bluetooth® device search paired, you must first delete one of the pre- from the mobile phone, operating to another viously paired phones. screen will prevent the car handsfree from being found in the mobile phone. Always conduct searches for Bluetooth® devices with the 2. Press the Pairings button on the Settings screen. 5-4 BLUETOOTH® HANDSFREE Search Bluetooth® device screen displayed. hen pairing the car handsfree from the 5. W 6. Once Bluetooth® connection is successful, mobile phone, a passkey input window will the name of the connected mobile phone become displayed on the mobile phone will become displayed on the PHONE screen. Input the passkey set within the car screen and Bluetooth® handsfree functions system into the mobile phone input win- will operate. dow. (The factory state passkey is 0000.) As shown in the figure, once the passkey INFORMATION Some functions may not be supported due to Bluetooth® connection between the car sys- limited Bluetooth® compatibility between the tem and mobile phone will start. car system and mobile phone. BLUETOOTH® HANDSFREE b e c o m e s s u c c e s s f u l l y i n p u t t e d, t h e BLUETOOTH® HANDSFREE 5-5 PART 5 BLUETOOTH® HANDSFREE Deleting a paired phone CAUTION! A mobile phone cannot be deleted if it is currently connected to the car system. To delete the phone, first disconnect the mobile phone and try again. 3. T he list of currently paired phones will be displayed. Select the phone you wish to 1. Press the Settings button on the PHONE screen. 2. Press the Pairings delete from the list and press the Delete button. button on the Settings screen. 4. A pop-up asking whether you wish to delete the paired phone will be displayed. Press the Yes button to delete the paired phone and the No 5-6 BLUETOOTH® HANDSFREE button to cancel. Connecting a mobile phone 3. T he list of currently paired phones will be displayed. Select the phone you wish to 1. Press the Settings button on the PHONE system and mobile phone will start. co n n e c t f ro m t h e l i s t a n d p re s s t h e Connect screen. 4. T he Bluetooth® connection between the car button. INFORMATION When there are no paired phones, pair the mobile phone through [Settings>Pairings> mobile phones, refer to the user's manual [Pairing and Connecting a Bluetooth® phone > Pairing a mobile phone]. ress the 2. P Connections Settings screen. button on the 5. Once Bluetooth® connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth® handsfree functions will operate. BLUETOOTH® HANDSFREE 5-7 BLUETOOTH® HANDSFREE Add to]. For more information on pairing PART 5 BLUETOOTH® HANDSFREE Disconnecting a mobile phone 3. T he list of currently paired phones will be 4. I f the connection between the mobile displayed. Select the phone you wish to dis- phone and Bluetooth® fails, the following pop-up will be displayed. If problems occur while connecting Bluetooth®, check for the ress the Settings button on the PHONE 1. P c o n n e c t f ro m t h e l i s t a n d p re s s t h e Disconnect screen. button. following conditions. ● Whether the mobile phone you wish to con- nect is in the vicinity of the car system ● W hether the power of the mobile phone Bluetooth® has been turned off ● Whether the mobile phone Bluetooth® has been set to hidden state ● Whether there are Bluetooth® compatibility issues between the car system and another mobile phone re s s t h e Connections 2. P Settings screen. b u t to n o n t h e op-up asking whether you wish to discon4. p nect the mobile phone will be displayed. Press the Yes button to disconnect the mobile phone and the cancel. 5-8 BLUETOOTH® HANDSFREE No button to
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Tagged PDF : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Modify Date : 2011:04:06 14:57:55-07:00 Create Date : 2011:03:18 18:45:57+09:00 Metadata Date : 2011:04:06 14:57:55-07:00 Creator Tool : Adobe InDesign CS4 (6.0.5) Format : application/pdf Document ID : uuid:323de890-4f71-4860-a2bf-64ea21c392ae Instance ID : uuid:0c645a25-7ebe-4427-8ad1-036f94948713 Producer : Adobe PDF Library 9.0 Has XFA : No Page Count : 70 Creator : Adobe InDesign CS4 (6.0.5) Trapped : FalseEXIF Metadata provided by EXIF.tools