HYUNDAI MOBIS AV2A0CSAN CAR AVN (BLUETOOTH) User Manual 2 of 3

HYUNDAI MOBIS CO., LTD. CAR AVN (BLUETOOTH) Users Manual 2 of 3

Contents

Users Manual (2 of 3)

NAVIGATION SYSTEM 3-19NAVIGATION SYSTEM(b) By city6.Press the City button.7. Input the city name and press the List button. If the number of matches with the input is less than 4 results, then the city list screen will be displayed automatically. 8.Select the desired city name.9. Input the name of the 1st street and press the List button. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically. 10. Select the desired 1st street menu from the list. 11. Input the name of the 2nd street and press the List button. If the number of matches with the input is less than 4 results, then the street list screen will be displayed automatically.
3-20 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM12. Select the desired 2nd street menu from the list. The corresponding position will be dis-played on the map. 13. If the selected 2nd street is within more than 2 cities, then the city list screen will be displayed. Select the desired city menu from the list. The corresponding position will be displayed on the map.Searching a POI There are 3 ways to set the destination through POI search - (a) by category, (b) by name, (c) by phone number. 1.Press the DEST key.2.Press the POI Search button.3.Press the State button.4. Input the state name and press the List button. If the number of matches with the input is less than 4 results, then the state list screen will be displayed automatically.If there is only one matching result, then the state will automatically be changed without having to manually select the state.5. Select the desired state from the list to change the state.
NAVIGATION SYSTEM 3-21NAVIGATION SYSTEM(a) By category Searches for facilities nearby the current posi-tion or from the city center.6.Press the Category button.7. Press the Near current position button to search for facilities nearby the current posi-tion, or press the Near city center button to search for facilities in the near city center. (a-1) Near current position Searches for facilities within a 50 mi (80Km) radius of the current position. 8.Press the desired main category menu. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Find nearest POI"[Find nearest POI], page 4-20.9. Press the desired sub category menu. 10.Select the desired menu button. The corresponding position will be dis-played on the map.
3-22 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM(a-2) Near city center Searches for facilities from the city center. 8. Input the city name and press the List button. If the number of matches with the input is less than 4 results, then the city list screen will be displayed automatically. 9.Press the desired city menu. 10.Press the desired main category. 11.Press the desired sub category.12. Select the desired menu button. The corresponding position will be dis-played on the map. INFORMATIONThe distance on each POI item button refers to the distance from the city center.
NAVIGATION SYSTEM 3-23NAVIGATION SYSTEM(b) By name6.Press the Name button.7. Input the name of the POI and press the List button. If the number of matches with the input is less than 4 results, then the facilities list screen will be displayed automatically. 8. Select the desired POI menu. The corresponding position will be dis-played on the map. INFORMATION When necessary, the search conditions for the city and category can be changed by pressing the Advanced button. ●Changing City 1.Press the City button.2. Input the city name and press the List button.3.Select the desired city name.●Changing Category1.Press the Category button.2.Select the desired main category menu. 3.Select the desired sub category menu. (c) By phone number6.Press the Phone # button.
3-24 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM7. Input the phone number and Press the Done button to complete. The corresponding position will be dis-played on the map. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command."Destination POI by Phone Number"[Destination POI by phone number], page 4-22.Searching from Address book1.Press the DEST key.2.Press the Address book button.3. Select the desired address book (user) menu. INFORMATIONThis system provides 5 address books. Each addresses book can hold up to 200 entries. 4. Select the desired address name from the list. The corresponding position will be displayed on the map. [Registering new address in address book], page 3-43.Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Destination by address book"[Destination by address book], page 4-24.
NAVIGATION SYSTEM 3-25NAVIGATION SYSTEMSearching for Emergency facilities1.Press the DEST key.2.Press the Emergency button.3.Select the desired facility category. 4.Select the desired facility. The corresponding position will be dis-played on the map. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Find emergency <Category>" [Find emergency <Category>], page 4-23. Searching your Home1.Press the DEST key.2.Press the HOME button. The Home position will be displayed on the map. INFORMATION If the Home address is not registered, then the HOME button will not be displayed. [Registering home address], page 3-48.Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command."Go home" [Go home], page 4-25.
3-26 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMSearching favorite places1.Press the DEST key.2. Select the desired button from 1 ~ 5 .The corresponding position will be dis-played on the map. INFORMATIONIf the address of the Favorite place is not regis-tered, then the 1 ~ 5 buttons without registered addresses will be disabled.[Registering favorite place], page 3-49.Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Destination by memory point <1 to 5>"[Destination by memory point <1 to 5>], page 4-25.Searching from MAP Position the scroll mark at the destination by scrolling the map on the map screen. Searching POI by local POI list1. Press the POI ▼ button on the map screen. 2.Press the Others button.3.Press the Local POI lists button.4.Select the desired POI menu. The corresponding position will be dis-played on the map. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Find nearest <POI name>"[Find nearest <POI name>], page 4-21.
NAVIGATION SYSTEM 3-27NAVIGATION SYSTEMOperating after searching a destinationChanging destination position : Changes the position of the destination by scrolling the map. [Scrolling map], page 3-11.Setting as Destination / waypoint :Sets the position as the destination or way-point. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Start guidance" (Sets the position of the scroll mark as the destination and begins route guidance.)Adding to address book : Saves the position in the address book. [Registering new address in address book], page 3-43. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Store Marked Location to <text tag>"
3-28 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMOperating after setting a destination Starting Route Guidance Press the Start Guidance button. Route Guid-ance will start. ●Route simulation• If the Start Guidance button is pressed and held for over 0.8 second, then the route simulation will start. • If the MAP VOICE key on the control panel is pressed during route simulation, then route simulation will be terminated. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Time to destination" "Distance to destination"Route guidance screen● Symbol guidance mode : if the button is pressed, then the following route guid-ance screen will be displayed. ● Turn-List mode : if the button is pressed, then the following route guidance screen will be displayed.
NAVIGATION SYSTEM 3-29NAVIGATION SYSTEM● Highway mode : if the button is pressed, then the following route guidance screen will be displayed.● Intersection zoom mode : this route guidance screen is automatically displayed during guidance at an intersection. Once guidance at the intersection is com-plete, the screen will automatically disappear and the previous guidance screen will be restored. ● Highway junction mode : this route guid-ance screen is automatically displayed dur-ing guidance at highway junctions. Once guidance at a highway junction is complete, this screen will automatically dis-appear and the previous guidance screen will be restored. Selecting other route1.Press the Altrenative Route button. 2. Other routes can be selected by pressing the or buttons.
3-30 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMRoute guidance Route menu screen and functionsPress the ROUTE key on the control panel. The ROUTE menu screen will be displayed. aCancel Route: deletes destination, way-points and terminates route guidance. [Finishing route guidance], page 3-30 .bRoute Overview: displays the entire route and route detailed.[Route overview], page 3-31 .cRoute Option: the route option can be changed. [Changing Route option], page 3-32 .dEdit Waypoint: waypoints can be added/deleted and the order can be changed. [Editing waypoints], page 3-32 . eDetour : searches detour routes. [Setting detour distance], page 3-35 .fAvoid Streets: searches routes which avoid the selected streets. [Setting avoid streets on route], page 3-35. Finishing route guidance (Delete Destination)1. Press the ROUTE key.2. Press the Cancel Route button. 3.Press the Yes button. The destination and waypoints are deleted and the route guidance is terminated.[Finishing route guidance], page 3-30 .adbecf
NAVIGATION SYSTEM 3-31NAVIGATION SYSTEMVoice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Cancel route"(Terminates route guidance and deletes the set destination and waypoints.)Route overview (View Entire Route)1.Press the ROUTE key.2.Press the Route Overview button.3.Press the Turn by Turn button.INFORMATIONIf the Return to guidance button is pressed, route guidance screen is displayed.4. The detailed route information can be viewed
3-32 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMChanging Route option1.Press the ROUTE key.2.Press the Route Option button.3. Press the button for the desired route guid-ance method. Guidance will be restarted after recalculat-ing the route with the selected guidance method. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Replan recommended route""Replan shortest route"Editing waypoints Adding waypointsThere are 2 ways to add waypoints - (a) searching for POI nearest to the route, (b) using advanced search.1.Press the ROUTE key.2.Press the Edit Waypoint button.3. Press the Press to add new waypoint but-ton.
NAVIGATION SYSTEM 3-33NAVIGATION SYSTEM(a) Searching POI lists near route 4.Press the Near POI Lists on Route button. 5.Select the desired category. 6.Select the desired sub category from list. 7. Select the desired POI from the list. The corresponding position will be dis-played on the map. 8.Press the Add as Waypoint button. 9. Press the Done button to complete. Guidance will restart after recalculating the route.
3-34 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM(b) Using advanced Search The method for searching waypoints through the Advanced(more) button is the same method as searching destination.[Searching a Destination], page 3-13.Deleting waypoints1. Press the ROUTE key.2.Press the Edit waypoint button. 3. Select the waypoint and press the Delete button. 4.Press the Yes button.5. After deleting, press the Done button to complete. Guidance will be restart after recalculating the route. Re-ordering waypoints1.Press the ROUTE key.2.Press the Edit waypoint button. 3. Select the desired waypoint and use the Move ▲, Move ▼ buttons to change the order. 4. Once re-ordering is complete, press the Done button to complete. Guidance will restart after recalculating the route.
NAVIGATION SYSTEM 3-35NAVIGATION SYSTEMSetting detour distance1.Press the ROUTE key.2.Press the Detour button. 3. Select the desired detour range.Guidance will restart after recalculating the detour route. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Detour <1 or 2 or 5 or 10> miles""Detour <1 or 2 or 5 or 10> kilometers"Setting avoid streets on route1.Press the ROUTE key.2.Press the Avoid streets button. 3. Select the desired streets to avoid( avoid, allow) and press the Done button to complete. Guidance will restarted after recalculating the route to avoid the selected streets.
3-36 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMSetup and Information Setup menu screen and functionsPress the SETUP key on the control panel to display the setup menu screen.aMain button : changes to the input key-board type, voice command feedback ON/OFF settings and system initialization can be made. [Main setting], page 3-36 .bVoice Setup button : adjusts the Navigation guidance volume. [Voice guidance volume setting], page 3-51.cNavigation button : navigation related set-tings can be set. [Navigation setting], page 3-38 .dClock Setup buttoneMy Places button : the Address book, Home address, Favorite places, Previous destination can be edited.[My places setting], page 3-43 .f Help button : the help contents can be viewed. [Help], page 3-54 .gTraffic Setup : sets to display traffic infor-mation on map, or to provide upcoming traffic information voice guidance, and or to display the detour route popup show-ing upcoming traffic information. abcdefg
NAVIGATION SYSTEM 3-37NAVIGATION SYSTEMMain setting1.Press the SETUP key.2.Press the Main button.3. Select the desired changes and press the Done button to complete. Setting keyboard for inputting letter Press the desired keyboard type button. The selection will be highlighted. Setting voice command feedback ON/OFFPress the desired setting button.Setting Language1.Press the Change button.2. Press the desired language. 3.Press the Done button to complete. System information and update1. Press the System Info button.Initializing system1.Press the Factory Default button.2.Press the menu desired for initialization.
3-38 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM3.Press the Yes buttoNavigation setting1. Press the SETUP key.2.Press the Navigation button.3. Select the desired changes and press the Done button to complete.Setting units (mile/ km)Select the desired distance unit. Setting arrival time and distance displaySelect the desired setting button. Registering avoid area1.Press the Avoid Area button.2.Press the Add new avoid area button.3. Set the start position of the avoid area and press the Next button.
NAVIGATION SYSTEM 3-39NAVIGATION SYSTEM4. Set the end position of the avoid area and press the Next button.5.Press the Done button to complete.6. If the Avoid area needs to be renamed, press the Rename button. 7. Rename the Avoid area and Press the Done button to complete. 8. Each time the Avoid button is pressed, the function will switch between avoid ( )or allow( ). 9. Press the Done button to complete the set-ting.
3-40 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMEditing avoid area1. Press the Avoid area button.2.Press the Edit avoid area button.3.Select the Avoid area button to edit.4. If the Avoid area needs to be renamed, press the Rename button.5. Rename the Avoid area and press the Done button to complete.6. Each time the Avoid button is pressed, the function will switch between avoid( )or allow( ). 7. Press the Done button once editing is complete.
NAVIGATION SYSTEM 3-41NAVIGATION SYSTEMDeleting avoid area1.Press the Avoid area button.2.Press the Edit avoid area button.3.Select the Avoid area button to delete. 4.Press the Delete button. 5.Press the Yes button.Deleting all avoid areas1.Press the Avoid area button.2 .Press the Delete all avoid area button.3.Press the Yes button.
3-42 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMSetting Q.POI icons1.Press the Edit Q.POI button.2.Select the desired menu. 3.Select the desired category. 4.Select the desired sub category. 5.Press the Done button to complete.INFORMATIONQ.POI stands for Quick POI and refers to the function which turns POI icon display on or off on the map. Setting estimate travel time1.Press the Travel Time button. 2. Pr ess th e or bu t ton on the Residential, Main street, and Freeway con-trols to adjust the speed. Press the Default butto n to set the speeds to the default settings. 3. Press the Done button to complete the set-ting.
NAVIGATION SYSTEM 3-43NAVIGATION SYSTEMMy places settingRegistering new address in address bookThere are 3 ways to register a new address in the address book - (a) by DEST menu, (b) by registering address in address book, (c) from map scroll. (a) by DEST menu1.Press the DEST key.2.Search through the desired method. The search process is the same as the meth-od for destination search.[Searching a destination], page 3-13.3.Press the Add to Address Book button.4. Press the desired address book (user) but-ton. 5.Input the name and telephone information and press the Done button to complete.[Editing an address of address book], page 3-45.(b) by registering in the address book 1.Press the SETUP key.2.Press the My Places button.3.Press the Address Book button.4. Press the desired address book (user) but-ton.
3-44 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM5.Press the New Address button.6. Press the Address button to search the address. [Searching an address], page 3-13.INFORMATION Press the Store current position button to input the address of the current position. 7. Input the name and telephone information and press the Done button to complete.[Editing an address of address book], page 3-45. (c) from map scroll1. In the map screen, scroll the map to the desired position. 2.Press the Add to Address Book button.3. Press the desired address book (user) but-ton. 4. Input the name and telephone information and press the Done button to complete.[Editing an address of address book], page 3-45.
NAVIGATION SYSTEM 3-45NAVIGATION SYSTEMEditing an address of address book1.Press the SETUP key.2. Press the My Places button.3.Press the Address Book button.4. Select the desired address book (user) but-ton .5.Select the desired address to edit. 6. Press the Name button to input the address name.7. Input the address name and press the Done button to complete.8. Press the Address button to search the address. The process is the same as the method for searching an address.[Searching an Address] , page 3-13.INFORMATIONPress the Store current position button to input the address of the current position.
3-46 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM9. Press the Phone button to input the phone number.10. Input the phone number and press the Done button to complete.11.Press the Done button to complete.Deleting an address of address book1.Press the SETUP key.2.Press the My Places button.3. Press the Address Book button.4. Select the desired address book (user) but-ton.5. Select the desired address button to delete. 6.Press the Delete button.
NAVIGATION SYSTEM 3-47NAVIGATION SYSTEM7.Press the Yes button.Deleting an address book1.Press the SETUP key.2.Press the My Places button.3. Press the Address Book button.4. Press the desired address book (user) but-ton.4.Press the Delete all button. 5.Press the Yes button.
3-48 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMRegistering home address1.Press the SETUP key.2.Press the My Places button.3.Press the Home Address button.4.Press the Search Address button.INFORMATIONPress the Store current position button to reg-ister the current position as Home. 5.Search the address. The process is the same method as search-ing an address. [Searching an Address], page 3-13.6.Press the Done button to complete.Deleting home address1.Press the SETUP key.2.Press the My Places button.3. Press the Home Address button.4.Press the Delete button.
NAVIGATION SYSTEM 3-49NAVIGATION SYSTEM5.Press the Yes button.Registering favorite place1. Press the SETUP key.2.Press the My Places button.3.Press the Favorite Places button.4. Press the number of the Favorite Place to register. 5. Press the Search Address button.INFORMATIONPress the Store current position button to reg-ister the current position as a Favorite place. 6.Search the address. The process is the same as the method for searching an address.[Searching an Address], page 3-13.
3-50 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEM7.Press the Done button to complete.Deleting favorite place1. Press the SETUP key.2.Press the My places button.3.Press the Favorite Places button.4. Select the desired favorite place button to delete. 5.Press the Delete button.6.Press the Yes button.
NAVIGATION SYSTEM 3-51NAVIGATION SYSTEMVoice guidance volume setting1.Press the SETUP key.2.Press the Voice Setup button.Voice guidance volume control● Set the desired volume level by using the or buttons and press the Listen button to verify the volume level. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Voice Guidance Louder" "Voice Guidance Softer" ● Press the Mute button when voice guid-ance is unnecessary. Voice guidance can be turned back on by pressing the or buttons or pressing the Mute button. Voice Command1. Press the key on the steering wheel remote controller.2. After the beep sound, say a command. "Voice Guidance On" "Voice Guidance Off"Adaptive volume control ON/OFF● Press the desired setting button. INFORMATIONAdaptive Volume ControlIf the speed of the vehicle is over approxi-mately 60 mi/h (100km/h), the volume level can be increased one level higher than the current level. If the speed of the vehicle falls under 60 mi/h (100km/h), the volume level will return to its original level.
3-52 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMTraffic Setup1. Press the SETUP key.2.Press the Traffic Setup button.3. Select the desired changes and press the Done button. INFORMATION●  Display Traffic and Flow data on Map : select whether to display traffic information on the map. ●  Voice Prompt for traffic and flow warning : select whether to provide voice guidance in front of Traffic Information. (On route - 3mile)● Display Detour pop-up message : select whether to display Detour pop up in front of Traffic Information. (On route - 3mile)Traffic Information(a) Viewing Traffic Information1. When the Traffic option is active, press the button on the Map screen.Traffic Flow INFORMATION Normal, Free Flowing (46 mph ~) Moderate Congestion (26 ~ 45 mph) Heavy Traffic, Stop and Go (0 ~ 25 mph) Road Construction Accident Congestion/Slow Traffic Incient Hazardous Road Conditions Travel InformationINFORMATION●  Traffic information will be shown on the map up until the scale is ~4mile.● Displays the traffic information around vehi-cle for up to a radius of 50 miles. (Information exceeding 50 miles will not be displayed)● The above list can be sorted by either Distance (Default) or Category.2.Select the desired List button.
NAVIGATION SYSTEM 3-53NAVIGATION SYSTEM 3. The user can check points of accidents and traffic details.(b) Changing Traffic Category1.Press the Advabed button at No. 2.2. After selecting the desired menu among the six menus, press the Done button to save. Once returning to the previous List screen, the corresponding Category list will be shown and maintained until Category information is changed.
3-54 NAVIGATION SYSTEMPART 3 NAVIGATION SYSTEMHelp1.Press the SETUP key.2.Press the Help button.3.Press the Navigation button.4.Press the desired Help menu button.5. The full content of the help section can be viewed by using the top-down scroll but-tons.
VOICE COMMAND SYSTEM 4-1VOICE COMMAND SYSTEMPART 4VOICE COMMAND SYSTEM Operating voice command ………… 4-2Condition for voice command system …… 4-2Basic operation for voice command control ……………………… 4-2Voice command Help …………………… 4-3Setting up the voice command system 4-4Setting voice Prompt ON/OFF ………… 4-4Speaker adaptation …………………… 4-4Voice command list ………………… 4-6Command list of Help ………………… 4-6Command list of Audio system ………… 4-7FM/AM Radio ………………………… 4-7SIRIUS Radio ………………………… 4-8CD …………………………………… 4-9MP3 …………………………………… 4-10USB MP3 ……………………………… 4-11USB IMAGE …………………………… 4-12iPod …………………………………… 4-12Others ………………………………… 4-13Command list of Navigation system ……… 4-14Map …………………………………… 4-14Destination …………………………… 4-15Destination …………………………… 4-16Route ………………………………… 4-16Others ………………………………… 4-17POI Category list ……………………… 4-18Searching destination by voice command ………………………… 4-19Find address ………………………… 4-19Find nearest POI ……………………… 4-20Find nearest <POI name> …………… 4-21Destination POI by phone number … 4-22Find emergency <Category> ……… 4-23Destination by address book ………… 4-24Previous destination ………………… 4-24Previous start point ………………… 4-25Go home ……………………………… 4-25Destination by memory point <1 to 5> ……………………… 4-25
4-2 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMOperating voice command Condition for voice command systemMost of the functions within the Audio and Navigation system can be operated by voice. Please follow the following instructions for optimal voice recognition performance. ● Close all windows and the sunroof. The per-formance of the voice recognition can be improved if the environment of the car inte-rior is quiet. ● Press the voice recognition button and say the desired voice command after the sound of the beep.● The microphone is positioned above the driver so that voice commands can be spo-ken while maintaining a proper posture.● Pronounce the voice commands naturally and clearly as if in a normal conversation. Basic operation for voice command control1. Press the key on the steering wheel remote controller. A voice command win-dow will be displayed on the lower side of the screen followed by a "Command please" system voice comment. INFORMATIONThe System voice comment "Command Please" will not be provided when the Voice prompt is turned OFF. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say the desired voice command (ex : previous destination) [Voice command list], page 4-6. [Searching destination by voice com-mand], page 4-19.If the exact command is not known, use the "Help" command to view the commands list in detail. INFORMATIONPress the key shortly to input a voice command from among the system voice com-ments. The system voice instruction comment will immediately terminate. When the icon changes into the icon with a beep sound, input the desired voice command.
VOICE COMMAND SYSTEM 4-3VOICE COMMAND SYSTEM3. The inputted command is fed back to the screen and voice system. If the command was not recognized properly, say "Back". INFORMATION● The commands which can currently be inputted are displayed on the screen in yel-low.● To terminate the voice recognition system, either say "cancel" or press the for over 0.8 second. ● Be aware that during the operation of the voice recognition system, pressing the hard keys or the screen will terminate the voice recognition system. Voice command Help1. Press the key on the steering wheel remote controller. A voice command win-dow will be displayed on the lower side of the screen followed by a "Command please" system voice comment.INFORMATIONThe System voice comment "Command Please" will not be provided when the Voice prompt is turned OFF. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Help". If the proper Help menu is already known, voice commands, such as "destination help" can be inputted directly. INFORMATIONThe "help" command can be used even while voice recognition dialogue is operating. At such time, help instructions appropriate to the state of the dialogue will be provided. 3. Say the name of the desired menu. (ex : "Destination help")4. Say the desired voice command.
4-4 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMSetting up the voice command system Setting voice Prompt ON/OFF● Voice prompt ON : all system prompts are provided. ● Voice prompt OFF : most of the system prompts are not provided. 1. Press the key on the steering wheel remote controller. 2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice setup." The "voice prompt on" or "voice prompt off" can be directly inputted if the current state is already known.3. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice Prompt on".INFORMATIONIn the Voice Setup Help screen, the com-mands possible for input within the current mode are displayed. For example, if the Voice prompt is currently in Off state, then the com-mand Voice prompt ON will be displayed on the screen. Speaker adaptation INFORMATIONSpeaker adaptation will improve performance of voice recognition system to a particular user voice. This will degrade the performance for other users. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Voice setup." Or the "Speaker adapta-tion" command can be directly inputted. 3. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Speaker adaptation".
VOICE COMMAND SYSTEM 4-5VOICE COMMAND SYSTEM4. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Yes". 5. Listen and repeat the 20 commands (approximate) as instructed by the device. ● Reset Speaker adaptation: Returns to previ-ous state prior to applying Speaker adapta-tion. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Reset Speaker adaptation".
4-6 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMVoice command list The voice commands for this system are divid-ed into Global commands and Local com-mands. ● Global command () : Commands which operate in all operating modes. ● Local command () : Commands which operate only when the corresponding mode is operating or when the mode screen to the corresponding mode is dis-played. Command list of HelpCommand Operation●Help Displays the main Help screen. ●Destination Help Displays the Destination related command list. ●Map Help Displays the Map related command list. ●Radio Help Displays the FM/AM radio related command list. ●SIRIUS Help Displays the SIRIUS radio related command list. ●Disc Help Displays the DISC mode related command list for the disc inserted in the CD Player. ●iPod Help Displays the iPod related Command list. ●USB Help Displays the USB related command list. ●Phone Help Displays the Phone help screen. ●Voice setup Help Displays the Voice prompt settings and speaker-adaptive commands on the screen.
VOICE COMMAND SYSTEM 4-7VOICE COMMAND SYSTEMCommand Operation● Radio Plays the most recent frequency for the most recently operated band.● (Radio) AM Plays the most recent frequency for the corresponding band. ● (Radio) FM Plays the most recent frequency for the corresponding band. In the case of FM, the most recent frequency within the most recently played FM1 or FM2 band is played. ● FM <1 or 2> Plays the most recent frequency for the corresponding band. ● AM frequency <530 to 1710>(ex. AM frequency 1310) Plays the desired AM band frequency. ● FM frequency <87.5 to 107.9>(ex. FM frequency 99.1) Plays the desired FM band frequency.● AM Preset <1 to 6> Plays the desired AM band preset frequency. ●FM <1 or 2> Preset <1 to 6> Plays the desired preset frequency of FM1 or FM2 band. ○ Preset <1 to 6> Plays the desired preset frequency for the current band. ○ Seek Up Searches and plays the next frequency of the current band. ○ Seek Down Searches and plays the previous frequency of the current band. ○ Preset Up Plays the next preset frequency of the current band. ○ Preset Down Plays the previous preset frequency of the current.○ Scan Scans all frequencies within the current band. ○ Preset Scan Scans the 6 preset frequencies of the current band. Command list of Audio systemFM/AM Radio
4-8 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMCommand Operation● SIRIUS Plays the last channel within the last band from SIRIUS1, SIRIUS2, and SIRIUS3. ● SIRIUS <1 or 2 or 3> Plays the most recent channel for the corresponding Band. ● SIRIUS Channel <0 to 223> Plays the desired SIRIUS band channel. ● SIRIUS <1 or 2 or 3> Preset <1 to 6> Plays the desired preset channel for SIRIUS1 or SIRIUS2 or SIRIUS3 band. ○ Channel < 0 to223 > Plays the desired channel of the current band.○ Preset <1 to 6> Plays the desired preset channel of the current band. ○ Channel Up Plays the next channel of the current band. ○ Channel Down Plays the previous channel of the current band. ○ Preset Up Plays the next preset channel of the current band. ○ Preset Down Plays the previous preset channel of the current band. ○ Scan Scans all channels within the current band. ○ Preset Scan Scans all preset channels within the current band.SIRIUS Radio
VOICE COMMAND SYSTEM 4-9VOICE COMMAND SYSTEMCommand Operation●DISC Plays the DISC already inserted in the CD Player. ●CD If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played.●CD track <1 to 665> If the DISC inserted in the CD Player is a CD, then CD Mode will start and plays the desired track. ○Track <1 to 665> Plays the desired track. ○Next track Plays the next track. ○Previous track Plays the previous track. ○Scan Scans all tracks on the CD DISC. ○Repeat track Repeats the current playing track.○Random Plays the tracks of the CD DISC in random order.○Normal play Turns off the Scan, Repeat, and Random functions. ○Pause Pauses the CD.○PlayThe command will only be enabled when the CD is paused.CD
4-10 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMCommand Operation● DISC Plays the DISC already inserted into the CD Player. ● CD If the DISC inserted in the CD Player is either a CD or MP3 DISC, then the CD or MP3 will be played.● MP3 If the DISC inserted in the CD Player is an MP3 DISC, then the MP3 will be played. ○ Next file Plays the next file. ○ Previous file Plays the previous file. ○ Next folder Plays the first file in the next folder. ○ Previous folder Plays the first file in the previous folder. ○ Scan Scans all files within the MP3 DISC. ○ Folder Scan Plays all songs in the folder in which the current playing file is located for 10 seconds each. ○ Repeat File Repeats the current playing file. ○ Repeat Folder Repeats all tracks within the current playing folder. ○ Random Plays all files within the MP3 DISC in random order. ○ Random Folder Plays all files within the current playing folder in random order. ○ Normal play Turns off the Scan, Repeat, and Random functions.○ PausePauses the MP3 DISC.○ PlayThe command will only be enabled when the MP3 DISC is paused.MP3
VOICE COMMAND SYSTEM 4-11VOICE COMMAND SYSTEMUSB MP3Command Operation● USB If the USB has been connected to the device, plays the MP3 files within the USB.○ Next file Plays the next file.○ Previous file Plays the previous file.○ Next folder Plays the first chapter of the next folder.○ Previous folder Plays the first chapter of the previous folder.○ Scan Scans all files within the USB.○ Folder Scan Plays all songs in the folder in which the current playing file is located for 10 seconds each.○ Repeat File Repeats the current playing file.○ Repeat Folder Repeats all songs within the current playing folder.○ Random Plays all files within the USB in random order.○ Random Folder Plays all files within the current playing folder in random order.○ Normal play Turns off the Scan, Repeat, and Random functions.○ Pause Pauses the USB.○ Play The command will only be enabled when the USB is paused.
4-12 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMiPodCommand Operation● iPod Plays the songs within the iPod if the iPod has been connected to the device. ○ Next song Plays the next song. ○ Previous song Plays the previous song. ○ Repeat song Repeats the current playing song. ○ Random Plays all songs within the iPod in random order. ○ Random Album Plays all songs within the current playing album in random order.○ Normal play Turns off the Repeat and Random functions.○Pause Pauses the iPod.○Play The command will only be enabled when the iPod is paused.USB IMAGECommand Operation● USB If the USB IMAGE has been connected to the device, plays the image files within the USB.○Next Image Moves to the next Image.○Previous Image Moves to the previous Image.○Next folder Moves to the next folder. ○Previous folder Moves to the previous folder.
VOICE COMMAND SYSTEM 4-13VOICE COMMAND SYSTEMOthersCommand Operation● Line in Plays the unit connected with the AUX terminal.● Audio on Turns on the Audio/Video. ● Audio off Turns off the Audio/Video.Command list of PhoneCommand Operation●Call Name Makes the call to the name.●Dial Number makes the callto the number.●Redial The recently called number is redialed.●Recent Calls The user can select a number from the outgoing, incoming, and missed calls.
4-14 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMCommand list of Navigation systemNavigation commands will operate only agreeing to the terms and conditions for the Navigation system. MapCommand Operation●Map Current location Displays the current position of the vehicle.●Zoom In Decreases the map zoom by one level. ●Zoom Out Increases the map zoom by one level. ●Zoom minimum Displays the map screen in the maximum zoom level. ●Zoom maximum Displays the map screen in the minimum zoom level. ●Zoom level <1 to 14> Displays the map in the zoom level selected from the 14 levels. ●Zoom <scale factor> Displays the map in the corresponding zoom.150 feet / 50 meters300 feet /100 meters700 feet / 200 meters0.25 miles / 400 meters0.5 miles / 800 meters1 mile / 1.6 kilometers2 miles / 3.2 kilometers4 miles / 6.4 kilometers8 miles / 12 kilometers16 miles / 25 kilometers32 miles / 50 kilometers64 miles / 100 kilometers130 miles / 200 kilometers250 miles / 400 kilometers(ex.Zoom 0.25 miles, zoom 400 meters)
VOICE COMMAND SYSTEM 4-15VOICE COMMAND SYSTEMCommand Operation○ North up Displays the map in North Up mode. ○ Heading up Displays the map in Heading Up mode. ○ Show <POI name> (ex. Show ATM) Displays the selected POI categories. [POI Category list], page 4-18.○ Hide <POI name> (ex. Hide ATM) Hides the selected POI categories. [POI Category list], page 4-18.○ Hide all Hides all POI categories. ○ Daylight mode Converts the map display into daylight mode. ○ Night mode Converts the map display into night mode. ○ Auto mode Converts the map display is between daylight/night modes automatically.DestinationCommand Operation●Find address Sets the destination through address search for route guidance.●Find nearest POI Sets a POI near the current position as the destination for route guidance through POI category search.●Find nearest <POI name> Sets a POI near the current position as the destination by directly inputting the POI name for route guidance. [POI Category list], page 4-18.●Destination POI by phone number Sets the destination by searching the phone number of the facility.●Find Emergency <Category>(ex. Find Emergency Hospital) Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. ●Destination by address book Sets one of the list of previously registered addresses in the address book for the user as the destination.
4-16 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMDestinationRouteCommand Operation●Previous destination Sets one of the previous destination as the current destination.●Previous start point Sets the previous start point as the current destination.●Go home Sets the previously registered home address as the destination for route guidance. ●Destination by memory point <1 to 5> Sets a previously registered memory point as the destination for route guidanceCommand Operation●Cancel route Deletes the designated destination and terminates the route guidance.●Repeat voice guidance Repeats the route guidance. ●Detour <1 or 2 or 5 or 10> miles Searches detour routes within a <1|2|5|10> mile radius. ●Detour <1 or 2 or 5 or 10> kilometers Searches detour routes within a <1|2|5|10> kilometer radius. ●Replan recommended route Recalculates the route with the recommended route. ●Replan shortest route Recalculates the route with the shortest route. ●Distance to destination Reports the remaining distance until destination by voice. ●Time to destination Reports the remaining time until destination by voice.○ View route If the destination has been set, displays the whole route screen until the destination. ○Start guidance Sets the scroll mark displayed on the map as the destination and starts route guidance.
VOICE COMMAND SYSTEM 4-17VOICE COMMAND SYSTEMOthersCommand Operation●Voice guidance on Turns the Voice Guidance On. ●Voice guidance off Turns the Voice Guidance Off.●Voice guidance louder Increases the Voice Guidance volume by 1 level. ●Voice guidance softer Decrease the Voice Guidance volume by 1 level. ●Store marked location to <text tag>(ex. Store marked location to user 1) Registers the selected location into the selected Address book.
4-18 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMPOI Category listAll restaurants Car Wash Home Specialty Store Court HouseFast Food restaurant Motorcycle Dealership Clothing shop Fire DepartmentAmerican restaurant All Travel Shoe Store Convention CenterFrench restaurant Airport Pharmacy City HallItalian restaurant Hotel All Recreation Civic CenterContinental restaurant Tourist Information Amusement Park SchoolMexican restaurant Travel Agent Museum Government OfficesJapanese restaurant Tourist Attraction Cinema Waste & SanitaryChinese restaurant City Cnter Sports Activities UtilitiesKorean restaurant Rental Car Agency Sports Complex All ServicesVegetarian Food restaurant Campground Golf Course HospitalSeafood restaurant Ferry Terminal Winery DentistLatin American restaurant Bus Station Video & Game Rental PhotographyAsian restaurant Local Transit Ski Resort Tax ServiceAfrican restaurant Train Station Recreation Area Medical ServiceCoffee Shop All Shopping Other Recreation AttorneyOther restaurants Department Store All Financial Service Funeral DirectorAll automotive Convenience Store Bank Hair & BeautyGas Station Shopping Center ATM Cleaning & LaundryParking Music Store Check Cashing Service Social ServiceAuto service Grocery Store Money Transfer Physician Road Assistance Bookstore Business Facility Communication servicesKia Dealership Electronics Store All Community Tailor & AlterationAutomobile Dealership Hardware Store Police Station Mover servicesAuto Parts Gifts shop Post OfficeRest Area Sporting Goods store Library
VOICE COMMAND SYSTEM 4-19VOICE COMMAND SYSTEMSearching destination by voice commandFind addressSets the destination through address search for route guidance. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Find address".3. Say "Change state" to change the state.4. Say the state name.5. Say the city name.6. Say the street name.7. Say the House number. Here, the range which can be inputted will be displayed. 8. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.
4-20 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMINFORMATIONSpell recognition● It is possible to search the state, city, street names through the text line inputted by the user. ● To enter spell search mode, say the "Spell state, city, street names" command as dis-played on the screen. ● Text lines can be inputted continuously.Pick-List(n-best list) ● If there are more than one voice result, then a pick-list which can be selected by the user will be displayed. ● There may be more than one list page. The desired page can be viewed by using com-mands such as "next page" or "previous page". ● Here, the "Line + number" voice command can be used to select the desired result, such as "Line one". Pressing the desired result is not supported. ● Also, selectable areas will be highlighted in yellow, allowing the user to easily see which results can be selected. Find nearest POISets a POI near the current position as the destination for route guidance through POI category search. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "find nearest POI".3. Select the desired main category.
VOICE COMMAND SYSTEM 4-21VOICE COMMAND SYSTEM4. Select the desired sub category. 5. Select the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1".6. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map. Find nearest <POI name> Sets a POI near the current position as the destination by directly inputting the POI name for route guidance.1.  Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Find nearest Parking".3. Select the desired POI from the list and say the line number for the corresponding menu. Ex) "Line 1".
4-22 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEM4. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Destination POI by phone numberSets the destination by searching the phone number of the facility.1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination POI by Phone number".3. Input the 10 numbers for the phone num-ber. INFORMATIONContinuous recognition of phone numbers is possible, and the recognized result will be dis-played in block units. To correct a block unit, say "correct". To delete the entire result, say "delete". To have the input read back, say "repeat".4. Say "Show list" to view the resulting search list.
VOICE COMMAND SYSTEM 4-23VOICE COMMAND SYSTEM5. Select the desired location from the list and say the line command.6. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Find emergency <Category> : Searches for an emergency facility which is nearby the current position and sets it as the destination for route guidance. Emergency facilities are police stations, hospitals, and dealerships. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say the voice command. ex)“Find emergency hospital”3. Select the desired location from the list and say the line command. 4. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.
4-24 VOICE COMMAND SYSTEMPART 4 VOICE COMMAND SYSTEMDestination by address bookSets one of the list of previously registered addresses in the address book for the user as the destination. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination by address book".3. Select the desired user name(Address book name).4. Select the desired location from the list and say the line command. 5. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Previous destinationSets one of the previous destination as the current destination. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Previous destination".3. Select the desired location from the list and say the line command.
VOICE COMMAND SYSTEM 4-25VOICE COMMAND SYSTEM4. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Previous start point Sets the previous start point as the current destination. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Previous start point".3. Say "Start guidance" if guidance to the selected position is desired, or say "Show map" to verify the location of the selected position on the map.Go home Sets the previously registered home address as the destination for route guidance. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Go home".Destination by memory point <1 to 5>Sets a previously registered memory point as the destination for route guidance. 1. Press the key on the steering wheel remote controller.2. Once the icon changes into the icon on the pop-up screen with a beep sound, say "Destination by memory point 1".
PART 5 BLUETOOTH® HANDSFREEPART 5BLUETOOTH® HANDSFREEBefore using the Bluetooth® Handsfree ……………………………… 5-2What is Bluetooth®? ……………………… 5-2Functions supported by Bluetooth® Handsfree …………………… 5-2Converting Bluetooth® Handsfree mode …………………………………… 5-2Converting from Audio/Navigation mode to Bluetooth® Handsfree mode ……………… 5-2Converting from Bluetooth® Handsfree mode to Audio/Navigation mode ………… 5-3Pairing and connecting a Bluetooth® phone …………………………………… 5-4Pairing a mobile phone …………………… 5-4Deleting a paired phone ………………… 5-6 Connecting a mobile phone ……………… 5-7Disconnecting a mobile phone …………… 5-8Bluetooth® Handsfree screen layout … 5-9Bluetooth® Handsfree screen andfunctions …………………………………… 5-9When there is no mobile phone connected ……………………………… 5-9When a mobile phone is connected …… 5-9When receiving an incoming call ……… 5-10When already on a call ………………… 5-10When there is a call waiting …………… 5-10Making a call ………………………… 5-11Making a call by dialing a phone number …………………………………… 5-11Making a call from Speed Dial …………… 5-11Making a call by redialing ………………… 5-12Answering a call …………………… 5-13Answering an incoming call ……………… 5-13Rejecting an incoming …………………… 5-13Operating menus during a call …… 5-14Switching call to the mobile phone ……… 5-14Activating Call waiting …………………… 5-14Ending a call ……………………………… 5-15Phone Book ………………………… 5-16Making a call from the Phone book ……… 5-16Searching the Phone Book ………………… 5-17 Searching by name …………………… 5-17Searching by number ………………… 5-18Call History List ……………………… 5-19Making a call from Call history …………… 5-19Sorting call history ………………………… 5-19Dialed number ………………………… 5-20Received number ……………………… 5-20Missed number ………………………… 5-20
BLUETOOTH® HANDSFREE 5-1BLUETOOTH® HANDSFREEPART 5BLUETOOTH® HANDSFREEPhone Music ………………………… 5-21Before playing Phone music ……………… 5-21Starting Phone Music ……………………… 5-21Phone music screen layout ……………… 5-22Selecting Phone music files ……………… 5-23Bluetooth® settings ………………… 5-24Pairing and connecting a mobile phone …… 5-24Setting mobile phone auto connect priority …………………………………… 5-24Setting Handsfree volume ………………… 5-25Setting Audio streaming ………………… 5-25Advanced settings ………………………… 5-26Setting Contacts Auto Download (Sync) …………………………………… 5-27Searching and modifying my device properties ……………………………… 5-27Changing passkey ……………………… 5-28Deleting all paired phones …………… 5-28Initializing Bluetooth® handsfree ……… 5-29Important information …………… 5-30About pairing mobile phones …………… 5-30About making/answering phone calls …… 5-31About Bluetooth® device environment …… 5-31
5-2 BLUETOOTH® HANDSFREEPART 5 BLUETOOTH® HANDSFREEBefore using the Bluetooth® HandsfreeWhat is Bluetooth®?● Bluetooth® allows wireless transmission of information between PC, mobile phones, headsets, PDAs, printers and other devices within close ranges by using 2.45Ghz fre-quency short-distance wireless telecommu-nication technologies.● Within this vehicle, users can make hands-free calls, transmit mobile phone data, and play audio streaming files by connecting a mobile phone with the system.Functions supported by Bluetooth® Handsfree● Pairing mobile phones (Up to 5 phones)● Connecting/disconnecting mobile phones● Making/Answering phone calls● Downloading a Phone Book●Downloading a Call history list● Playing music saved in a Bluetooth® phone in the vehicleSome functions may not be supported in some mobile phone. Converting Bluetooth® Handsfree modeConverting from Audio/Navigation mode to Bluetooth® Handsfree 1. While in Audio mode or Navigation mode, press the PHONE key or the key on the steering wheel. Bluetooth® is a trademark owned byBluetooth® SIG, Inc.
BLUETOOTH® HANDSFREE 5-3BLUETOOTH® HANDSFREE2. The system will change to Bluetooth® Handsfree mode and display the PHONE screen. 3. The following screen will become displayed if no mobile phone has been connected.Converting from Bluetooth® Handsfree mode to Audio/Navigation mode1. While in Bluetooth® Handsfree mode, press an Audio/Navigation mode key, such as FM/AM or MAP VOICE .2.The corresponding mode will be displayed.INFORMATIONMost of the functions of the Audio or SETUP modes are not supported while on a Bluetooth® Handsfree call. The call volume and Navigation (MAP VOICE, DEST, ROUTE) screens can be operated.
5-4 BLUETOOTH® HANDSFREEPART 5 BLUETOOTH® HANDSFREEPairing and connecting a Bluetooth® phonePairing a mobile phone1. Press the Settings button on the PHONE screen. 2. Press the Pairings button on the Settings screen. 3. The list of currently paired phones will be displayed. Press the Add to button to pair a new mobile phone.INFORMATIONFor safety reasons, pairing a Bluetooth® phone is not possible when the vehicle is in motion. Park the vehicle in a safe location to pair a new phone. It is possible to pair up to five mobile phones. In order to pair a new phone when there are already five mobile phones paired, you must first delete one of the pre-viously paired phones.4. From the Bluetooth® device list within the mobile phone, add the car handsfree. The default name of the car system is KIA MOTORS.For more information on registering Bluetooth® devices from the mobile phone, please refer to the mobile phone user's manual. INFORMATIONWhile conducting a Bluetooth® device search from the mobile phone, operating to another screen will prevent the car handsfree from being found in the mobile phone. Always con-duct searches for Bluetooth® devices with the Search Bluetooth® device screen displayed.
BLUETOOTH® HANDSFREE 5-5BLUETOOTH® HANDSFREE5. When pairing the car handsfree from the mobile phone, a passkey input window will become displayed on the mobile phone screen. Input the passkey set within the car system into the mobile phone input win-dow. (The factory state passkey is 0000.) As shown in the figure, once the passkey becomes successfully inputted, the Bluetooth® connection between the car sys-tem and mobile phone will start.6. Once Bluetooth® connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth® handsfree functions will operate.INFORMATIONSome functions may not be supported due to limited Bluetooth® compatibility between the car system and mobile phone.
5-6 BLUETOOTH® HANDSFREEPART 5 BLUETOOTH® HANDSFREEDeleting a paired phone1. Press the Settings button on the PHONE screen. 2. Press the Pairings button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to delete from the list and press the Delete button.4. A pop-up asking whether you wish to dele-te the paired phone will be displayed. Press the Yes button to delete the paired phone and the No button to cancel. CAUTION!A mobile phone cannot be deleted if it is currently connected to the car system. To delete the phone, first disconnect the mobile phone and try again.
BLUETOOTH® HANDSFREE 5-7BLUETOOTH® HANDSFREE Connecting a mobile phone1. Press the Settings button on the PHONE screen. 2. Press the Connections button on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to co nn ect from the list and pres s th e Connect button. INFORMATIONWhen there are no paired phones, pair the mobile phone through [Settings>Pairings> Add to]. For more information on pairing mobile phones, refer to the user's manual [Pairing and Connecting a Bluetooth® phone > Pairing a mobile phone]. 4. The Bluetooth® connection between the car system and mobile phone will start.5. Once Bluetooth® connection is successful, the name of the connected mobile phone will become displayed on the PHONE screen and Bluetooth® handsfree functions will operate.
5-8 BLUETOOTH® HANDSFREEPART 5 BLUETOOTH® HANDSFREE4. If the connection between the mobile phone and Bluetooth® fails, the following pop-up will be displayed. If problems occur while connecting Bluetooth®, check for the following conditions.● Whether the mobile phone you wish to con-nect is in the vicinity of the car system● Whether the power of the mobile phone Bluetooth® has been turned off● Whether the mobile phone Bluetooth® has been set to hidden state● Whether there are Bluetooth® compatibility issues between the car system and another mobile phoneDisconnecting a mobile phone1. Press the Settings button on the PHONE screen. 2. Press the Connections butto n on the Settings screen. 3. The list of currently paired phones will be displayed. Select the phone you wish to dis-co nn ect from the list and pres s th e Disconnect button.4. pop-up asking whether you wish to discon-nect the mobile phone will be displayed. Press the Yes button to disconnect the mobile phone and the No button to cancel.

Navigation menu