HYUNDAI TELECOM HCH-H2PT loT Home Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3901273
Application ID	RssgGTiZf0VwFqVHjy9Abw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.24kB (1003039 bits)
Date Submitted	2018-06-26 00:00:00
Date Available	2018-06-26 00:00:00
Creation Date	2018-06-12 15:19:32
Producing Software	Microsoft® Word 2010
Document Lastmod	2018-06-12 15:19:32
Document Title	Users Manual
Document Creator	Microsoft® Word 2010
Document Author:	Bonnie.Jiang

HYUNDAI TELECOM
Smart Home Camera
Quick Star t Guide
COPY RI G HT
©2017 Hyundai Telecom
Co., Ltd.ALL RIGHT S RESE RV E D.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hyundai Telecom Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hyundai Telecom”). This user manual (hereinafter referred to be “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without
the prior written permission of Hyundai Telecom. Unless otherwise stipulated, Hyundai
Telecomdoesnotmakeanywarranties,guaranteesorrepresentation s,e xpressorimplied,
regarding to the Manual.
● While in delivery, pack the camera in its original, or equivalent, packing, packing
materials. Or packing of the same texture.
● Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment
shall be replaced regularly according to their average endurance. The average time
varies because of differences between operating environments and usage history, so
regular checking is recommended for all users. Please contact your dealer for more
details.
● Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instruction s provided by the battery manufacturer.
● If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibilit y for problems caused by unauthorized repair or maintenance .)
▶ Trademar ks Ackno wl ed g em en t
Hyundai Telecom and other Hyundai Telecom’s trademarks and logos are the properties
of Hyundai Telecom in various jurisdictions. Other trademarks and logos mentioned
below are the properties of their respective owners.
▶ Regulator y Informatio n
FCC Informatio n
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance:This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected .
—Consul t the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformit y Statemen t
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/E U, Radio Equipment Directive 2014/53/E U.
Safety Instructi on
These instructions are intended to ensure that a user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Step 1
P ower on the Cam era
Connect the cam era to the power adapter with the M icro US B cable, and
then plug the power adapter into the power outlet. When the blue light
flashes, the cam era is powered on. You can set the Wi-Fi connection.
▶Appearance
▶ About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts,
imagesandallotherinformationhereinafterarefordescriptionandexplanationonly.The
information contained in the Manual is subject to change, without notice, due to firmware
updates or other reasons. Please find the latest version in the company website (http://
www.hyundaitel.co. kr/eng/). Visit the company website (http://www.hyundaitel .co .kr /
eng/) to get the manuals, client software, and developing tools. Please use this user
manual under the guidance of profession al s.
▶ Legal Discl ai m er
TO THE MAXIM UM EXTE NT PERMI T T E D BY APPLI CA B L E LAW, THE PRODUCT
DESCRI B E D, WITH ITS HARDWA R E, SOFTWA RE AND FIRM WA RE , IS PROVI DE D
“AS IS”, WITH ALL FAULTS AND ERRORS , AND HYUNDA I TELECO M MAKE S
NO WARRA N TI E S , EXPRE S S OR IMPLIE D, INCLUDI NG WITHO UT LIMITATI O N,
MERCHA NT A B I LI T Y, SATISF A CT O RY QUALIT Y, FITNE S S FOR A PARTICUL A R
PURP O S E, AND NON-INF RI NG E M E NT OF THIRD PARTY. IN NO EVENT WILL
HYUND AI TELECO M , ITS DIRE CT O RS , OFFICE RS , EMPLO Y E E S , OR AGENT S
BE LIABLE TO YOU FOR ANY SPECI A L, CONS E Q U E NT I AL , INCI DE NT A L, OR
INDIRE CT DAMAG E S , INCLUDI NG, AMONG OTHERS , DAMA G E S FOR LOSS
OF BUSI NE S S PROFI T S , BUSI NE S S INTE RRU PT I O N, OR LOSS OF DATA OR
DOCUM E NTA TI O N, IN CONNE CT I O N WITH THE USE OF THIS PRODUCT, EVEN
IF HYUNDA I TELECO M HAS BEEN ADVI S E D OF THE POSSI B IL I T Y OF SUCH
DAMA G E S .
REGARDI NG TO THE PRODUCT WITH INTE RNE T ACCE S S , THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS . HYUNDA I TELECO M
SHALL NOT TAKE ANY RESP O NS I B IL I T E S FOR ABNO RM AL
OPERA T I O N,
PRIVA CY LEAKA G E OR OTHE R DAMA G E S RESULT I NG FROM CYBE R ATTACK ,
HACK E R ATTACK , VIRUS INSP E CT IO N, OR OTHER INTERN E T SECURI T Y RISK S ;
HOWE V E R, HYUND AI TELECO M WILLPRO VI D E TIMELYT E C HNI CAL S U P P O RT IF
REQUI R E D.
SURV EI LL A NC E LAWS VARY BY JURIS DI CT I O N. PLEAS E CHECK ALL RELEV A NT
LAWS IN YOUR JURIS DI CT IO N BEFORE USING THIS PRODUCT IN ORDER
TO ENSURE THAT YOUR USE CONFO RM S THE APPLI CA BL E LAW. HYUNDA I
TELECO M SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED
WITH ILLEGIT I M AT E PURP O S E S .
IN THE EVENT OF ANY CONFLI CT S
BETWE E N THIS MANUAL AND THE
APPLI CA B L E LAW, THE LATER PREVA IL S .
▶Operations
Name
S tatus Indicator
IR Light
Auto light source for night vision. The light is behind the
anti-reflectio n panel. You can see the light when it is on.
- Launch the app and register for a HT Hom e V iewer user account.
Use of the product is subject to your registration with HT Hom e V iewer
and your agreem ent to the Term s of S ervice found at
Micro USB for power supply, 5V. Plug the power cable
into the power input interface to power on the camera.
For microSD card. If a memory card is used, video files
will be stored in the memory card. You would need to
initialize it in the Hik-Connect app.
P ower Input
M em ory
Card S lot
WP S /RE S E T
Descrip tio n
Steady red: The camera is starting up.
Flashing blue: The camera is started, and is ready for
Wi-Fi set-up.
Steady blue: Wi-Fi configuratio n is completed and the
camera is running properly.
Flashing red: network communica tion is abnormal.
Step 2
HT Hom e V iewer S etup
- Connect your m obile device to Wi-Fi.
- Download and install the HT Hom e V iewer app by searching the “HT
Hom e V iewer” in A pp S tore or Google P layTM .
WPS: Set Wi-Fi connectio n via WPS (Wi-Fi Protected
Setup) function.
RESET: Hold down the button for 4 seconds when the
camera is running.
Step 3
A dd the Cam era to Your HT Hom e V iewer A ccount
S tart the adding process only when the indicator flashes blue.
- Connect your m obile phone to a Wi-Fi (5G Wi-Fi is not supported yet).
- Log into the HT Hom e V iewer app.
- In the Hom e page, tap “+” on the upper-right corner to add a cam era.
- S can the QR code on the bottom of the cam era or on the Quick S tart
Guide.
- Tap Connect to a Network button in the popup interface.
- Choose Wired Connection or Wireless Connection on your dem and in
the popup interface.
● Wireless Connection
Input the Wi-Fi password that your m obile phone has connected to,
and tap Next to start the Wi-Fi connection process. (Locate the cam era
within 3 m eters from the router when setting up the Wi-Fi.)
● Wired Connection
➋ Open the cover to expose the m em ory card slot, and insert the
Connect the cam era to the router with a network cable and tap
m em ory card.
Connected in the Result interface.
The router should be the sam e one that your m obile phone has connected
to.
▶Installation
1.Install memory card (optional).
➊ A djust the tilting position of the cam era to expose the rem ovable
cover.
➌ Install the rem ovable cover back.
2. Install the camera.
➊ Take out the drill tem plate from the package. P aste it to the desired
m oungting place.
➋ Drill two screw holes according to the drill tem plate if you use
expansion screws.
- Tap A dd button in the next interface to finish adding.
▶HT Home Viewer
With HT Hom e V iewer service, you can realize som e certain functions of
this product (including, but not lim ited to, live view, and rem ote playback)
, which depend on the internet and telecom value-added services.
➌ Take out the bracket from the package. A lign the screw holes and fix
the B racket
Live View
Launch the HT Hom e V iewer app and you can get the live view of the
connected devices.
Recording
Warnin g s : Follow these safeg u ar d s
to preven t seriou s injury or death .
Cauti o n s: Follow these precau ti o n s
to preven t potenti al injury or
materi al damag e.
Bracket
●
●
●
●
●
●
●
●
●
●
●
●
●
Warnings
Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for
detailed information .
Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket. When the
product is mounted on wall or ceiling, the device shall be firmly fixed.
If smoke, odor, or noise rise from the device, turn off the power at once and unplug the
power cable, and contact the service center.
Caution s
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth
with a bit of ethanol and wipe it gently. If the camera will not be used for an extended
period, replace the lens cap to protect the sensor from dirt.
Do not aim the camera at the sun or extra bright places. Blooming or smearing may
occur(whichisnotamalfunction),andaffe ct thesen sor’sendurancea tthe sameti me.
The sensor may be burned out by a laser beam, so when any laser equipment is in
use, make sure that the surface of sensor will not be exposed to the laser beam.
Do not place the camera in extremely hot, cold (the operating temperature shall be
-10°Cto+40°C),dusty,ordamplocations,anddonote xpo seittohighele ctromagne tic
radiation.
To avoid heat accumulat ion , ensure that there is good ventilatio n to the device.
Keep the camera away from liquids.
➍ Fit the bracket into the cam era bottom , and rotate the cam era base
clockwise to get it fixed.
- Check the m em ory card status by tapping on the S torage S tatus in the
Device S ettings interface.
- If the m em ory card status displays as Uninitialized, tap to initialize it.
The status will then change to Norm al. You can then start recording any
event-triggered video in the cam era such as m otion detection.
Playback
Launch the HT Hom e V iewer app, tap a connected device and tap
Gallery button to play back.
Alarm Notification
Launch the HT Hom e V iewer app and tap M essage to see the alarm
m essages.
3. Adjust the surveillance angle.
➊ Rotate the cam era body to adjust the panning position.
➋ M ove the dom e drive upwards or downwards to adjust tilting position.
This equipm ent should be installed and operated with a m inim um distance 20cm
between the rad iator and your body
HYUNDAI TELECOM
Smart Home Camera
Quick Star t Guide
COPY RI G HT
©2017 Hyundai Telecom
Co., Ltd.ALL RIGHT S RESE RV E D.
Any and all information, including, among others, wordings, pictures, graphs are the
properties of Hyundai Telecom Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hyundai Telecom”). This user manual (hereinafter referred to be “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without
the prior written permission of Hyundai Telecom. Unless otherwise stipulated, Hyundai
Telecomdoesnotmakeanywarranties,guaranteesorrepresentation s,e xpressorimplied,
regarding to the Manual.
▶ About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts,
imagesandallotherinformationhereinafterarefordescriptionandexplanationonly.The
information contained in the Manual is subject to change, without notice, due to firmware
updates or other reasons. Please find the latest version in the company website (http://
www.hyundaitel.co. kr/eng/). Visit the company website (http://www.hyundaitel .co .kr /
eng/) to get the manuals, client software, and developing tools. Please use this user
manual under the guidance of profession al s.
● While in delivery, pack the camera in its original, or equivalent, packing, packing
materials. Or packing of the same texture.
● Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment
shall be replaced regularly according to their average endurance. The average time
varies because of differences between operating environments and usage history, so
regular checking is recommended for all users. Please contact your dealer for more
details.
● Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instruction s provided by the battery manufacturer.
● If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibilit y for problems caused by unauthorized repair or maintenance .)
説明
Name
Statu s Indica to r
*赤 色 に 点 灯 ： カ メ ラ の 起 動 準 備 中 で す 。
* 青 色 の 点 滅 ： カ メ ラ が 起 動 し 、 Wi-Fi セ ッ ト ア ッ プ の 準 備
ができました。
*青 色 の 点 灯 ： Wi-Fi 構 成 が 完 了 し 、 正 常 に 動 作 し て い ま す 。
*赤 く 点 滅 ： ネ ッ ト ワ ー ク 通 信 エ ラ ー 。
IR Light
夜 間 環 境 で 自 動 的 に 付 く 光 源 （ 赤 外 線 ）。 こ れ は 反 射 パ ネ
ル の 後 ろ に あ り ,周 り が 暗 く な る と ラ イ ト オ ン 状 態 が 確 認 で
きます。
Power
Input
Memor y
Card Slot
WPS / RE S E T
電 源 用 マ イ ク ロ USB、 5V プ ラ グ を 差 し 込 み 、 電 源 コ ー ド を 電
源入力インターフェイスに接続します。
カメラの電源を入れます。
microSD カ ー ド 用 で メ モ リ カ ー ド を 使 用 す る 場 合 は 、 ビ デ オ
ファイルはメモリカードに保 存さ れま す。あ なた はそ れ を
HT Home Viewer ア プ リ で 初 期 化 す る 必 要 が あ り ま す 。
WPS： WPS（ Wi-FiProtected Setup） 機 能 を 通 じ て Wi-Fi 接 続
を設定する
リセット：カメラの電源がオンの状態でボ タンを 4 秒間押 し
続ける。
▶設置
1.メ モ リ ー カ ー ド の 設 置 （ オ プ シ ョ ン ）
➊ Removable Cover が 取 り外 せ るよ うに カメ ラの 回 転位 置を 調整 し ます 。
▶ Regulator y Informatio n
FCC Informatio n
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance:This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected .
—Consul t the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformit y Statemen t
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/E U, Radio Equipment Directive 2014/53/E U.
Safety Instructi on
These instructions are intended to ensure that a user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Step 1
カメラの電源を入れる。
カ メ ラ を 電 源 ア ダプ タ に接 続し ます 。 マイ クロ USB ケ ーブ ルを 接 続し 、電 源ア
ダ プ タ を プ ラ グ に 差し 込み ま す。 青色 のラ イ トが 点滅 する と 、カ メラ の 電源
がオンになっている状態です。
こ れ で Wi-Fi 接 続 の 設 定 準 備 が で き ま し た 。
▶外観
▶ Trademar ks Ackno wl ed g em en t
Hyundai Telecom and other Hyundai Telecom’s trademarks and logos are the properties
of Hyundai Telecom in various jurisdictions. Other trademarks and logos mentioned
below are the properties of their respective owners.
▶ Legal Discl ai m er
TO THE MAXIM UM EXTE NT PERMI T T E D BY APPLI CA B L E LAW, THE PRODUCT
DESCRI B E D, WITH ITS HARDWA R E, SOFTWA RE AND FIRM WA RE , IS PROVI DE D
“AS IS”, WITH ALL FAULTS AND ERRORS , AND HYUNDA I TELECO M MAKE S
NO WARRA N TI E S , EXPRE S S OR IMPLIE D, INCLUDI NG WITHO UT LIMITATI O N,
MERCHA NT A B I LI T Y, SATISF A CT O RY QUALIT Y, FITNE S S FOR A PARTICUL A R
PURP O S E, AND NON-INF RI NG E M E NT OF THIRD PARTY. IN NO EVENT WILL
HYUND AI TELECO M , ITS DIRE CT O RS , OFFICE RS , EMPLO Y E E S , OR AGENT S
BE LIABLE TO YOU FOR ANY SPECI A L, CONS E Q U E NT I AL , INCI DE NT A L, OR
INDIRE CT DAMAG E S , INCLUDI NG, AMONG OTHERS , DAMA G E S FOR LOSS
OF BUSI NE S S PROFI T S , BUSI NE S S INTE RRU PT I O N, OR LOSS OF DATA OR
DOCUM E NTA TI O N, IN CONNE CT I O N WITH THE USE OF THIS PRODUCT, EVEN
IF HYUNDA I TELECO M HAS BEEN ADVI S E D OF THE POSSI B IL I T Y OF SUCH
DAMA G E S .
REGARDI NG TO THE PRODUCT WITH INTE RNE T ACCE S S , THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS . HYUNDA I TELECO M
SHALL NOT TAKE ANY RESP O NS I B IL I T E S FOR ABNO RM AL
OPERA T I O N,
PRIVA CY LEAKA G E OR OTHE R DAMA G E S RESULT I NG FROM CYBE R ATTACK ,
HACK E R ATTACK , VIRUS INSP E CT IO N, OR OTHER INTERN E T SECURI T Y RISK S ;
HOWE V E R, HYUND AI TELECO M WILLPRO VI D E TIMELYT E C HNI CAL S U P P O RT IF
REQUI R E D.
SURV EI LL A NC E LAWS VARY BY JURIS DI CT I O N. PLEAS E CHECK ALL RELEV A NT
LAWS IN YOUR JURIS DI CT IO N BEFORE USING THIS PRODUCT IN ORDER
TO ENSURE THAT YOUR USE CONFO RM S THE APPLI CA BL E LAW. HYUNDA I
TELECO M SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED
WITH ILLEGIT I M AT E PURP O S E S .
IN THE EVENT OF ANY CONFLI CT S
BETWE E N THIS MANUAL AND THE
APPLI CA B L E LAW, THE LATER PREVA IL S .
▶作動
➋ カバーを取り外してメモリカードをスロットに挿入します。
Step 2
HT Home Viewer Setup .
- モ バ イ ル デ バ イ ス を Wi-Fi に 接 続 し ま す 。
- App Store ま た は Google Play で 「 HT Home Viewer」 を 検 索 し 、
アプリをダウンロードしてインストールします。
- ア プ リ ケ ー シ ョ ンを 起 動し 、HT Home Viewer ユー ザー ア カウ ント に 登録 しま
す。
製 品 の 使 用 に つ い ての 登録 及 び HT Home Viewer サ ー ビ スを ご利 用 する には 利
用 規 約 を 必 ず 熟 知 して 下さ い 。詳 しい 内容 は 下記 の QR コー ドで ご 確認 して く
ださい。
Step 3
HT Ho me V iew er ア カ ウ ン ト に カ メ ラ を 追 加 す る 。
インジケーターが青色で点滅しているときに追加設定を行ってください。
- 携 帯 電 話 を Wi-Fi に 接 続 し ま す 。
（ 5G Wi-Fi は 接 続 で き ま せ ん の で ご 注 意 く だ さ い ）
- HT Home Viewer ア プ リ に ロ グ イ ン し ま す 。
- ホ ー ム 画 面 で 、 右 上 の 「 +」 を ク リ ッ ク プ し て カ メ ラ を 追 加 す る 。
- カ メ ラ 底 面 又 は ク イッ ク スタ ート ガ イド カバ ーに あ る QR コ ー ドを スキ ャ ン
して下さい。
- ポ ッ プ ア ッ プ イ ンタ ー フェ イス の[Connect to a Network]をク リ ック して く
ださい。
- ポ ッ プ ア ッ プ イ ンタ ー フェ イス 画面 か ら有 ・無 線の 接 続方 法を 選 択し て下
さい。
● ワイヤレス接続
携 帯 電 話 に Wi-Fi の パ スワ ー ドを 入力 し て下 さい 。そ し て[次 へ]を クリ ック
す る と Wi-Fi 接 続 が 開 始し ま す。（カ メ ラを Wi-Fi 設 定 する とき は 無線 ルー
タから 3 メートル以内に配置します）
● 有線接続
ネ ッ ト ワ ー ク ケ ー ブル でカ メ ラを ルー タ に接 続す る Result イ ンタ ーフ ェイ
ス で Connected を タ ッ プ し ま す 。
携 帯 電 話 の Wi-Fi と ル ー タ の Wi-Fi が 同 じ か 確 認 し て く だ さ い 。
（ 同 じ Wi-Fi に 設 定 し て く だ さ い ）
➌ カバーを元に閉じます。
2. カ メ ラ の 設 置
➊ パッケージからドリルテンプレートを取り出します。
希望の場所に貼り付けてください。
➋ ド リ ル テ ン プ レ ート に合 わ せて 2 つ のネ ジ 穴を ドリ ルで 作っ て くだ さい 。
- 次 の イ ン タ ー フ ェ イ ス で [追 加 ]ボ タ ン を ク リ ッ ク す る と 追 加 完 了 で す 。
▶ HT Ho me V iew er
HT Home Viewer は 、 イ ン タ ーネ ット 環 境で （ラ イブ ビ ュー 、リ モ ート 再生 な
ど）のサービスができます。
➌ パ ッ ケ ー ジ か ら ブラ ケッ ト を取 り出 しま す 。ネ ジ穴 に合 わせ 、 ブラ ケッ
トを固定します。
ライブビュー
HT Home Viewer ア プ リ を 起 動す る と、 接続 した デ バイ スの ラ イブ ビュ ーが で
きます。
Cauti o n s: Follow these precau ti o n s
Warnin g s : Follow these safeg u ar d s
to preven t potenti al injury or
to preven t seriou s injury or death .
materi al damag e.
Warnings
● Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
● In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for
detailed information .
● Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
● Please make sure that the plug is firmly connected to the power socket. When the
product is mounted on wall or ceiling, the device shall be firmly fixed.
● If smoke, odor, or noise rise from the device, turn off the power at once and unplug the
power cable, and contact the service center.
●
●
●
●
●
●
●
●
Caution s
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth
with a bit of ethanol and wipe it gently. If the camera will not be used for an extended
period, replace the lens cap to protect the sensor from dirt.
Do not aim the camera at the sun or extra bright places. Blooming or smearing may
occur(whichisnotamalfunction),andaffe ct thesen sor’sendurancea tthe sameti me.
The sensor may be burned out by a laser beam, so when any laser equipment is in
use, make sure that the surface of sensor will not be exposed to the laser beam.
Do not place the camera in extremely hot, cold (the operating temperature shall be
-10°Cto+40°C),dusty,ordamplocations,anddonote xpo seittohighele ctromagne tic
radiation.
To avoid heat accumulat ion , ensure that there is good ventilatio n to the device.
Keep the camera away from liquids.
Bracket
➍ ブ ラ ケ ッ ト を カ メラ の底 に はめ 込み 、カ メ ラベ ース を時 計回 り に回 して
固定します。
録画
デ バ イ ス 設 定 イ ン ター フ ェイ スの スト レ ージ ステ ータ ス を押 して メ モリ カー
ド の ス テ ー タ ス を 確認 して 下 さい 。メ モリ カ ード のス テー タ スが 初期 化 され
て い な い 場 合 は 、 初期 化ボ タ ンを 押し て下 さ い。 そう する と モー ショ ン など
イベントが発生した場合、正常に録画します。
再生
HT Home Viewer ア プリを 起動し、 繋がっ ているデ バイス をクリ ックしま す。
そ し て 「 ギ ャ ラ リ ー 」 ボ タ ン を ク リ ック す る と 再生 で き ま す。
アラーム通知
HT Home Viewer ア プ リ を 起 動し 、 メッ セー ジを ク リッ クし て アラ ーム メッ セ
ージ内容を確認します。
3. 監 視 角 度 を 調 整 し ま す 。
➊ パ ン ニ ン グ ポ ジ ショ ンを 調 整す るに は、 カ メラ 本体 を回 転さ せ ます 。
➋ ドームドライブを上または下に動かして傾動位置を調整します。


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Bonnie.Jiang
Creator                         : Microsoft® Word 2010
Create Date                     : 2018:06:12 15:19:32+08:00
Modify Date                     : 2018:06:12 15:19:32+08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools