Haier US Appliance Solutions BLEC001 BT Module Ph2 with harness connection User Manual ITON BB2710 29 V1 3
Haier US Appliance Solutions, Inc. BT Module Ph2 with harness connection ITON BB2710 29 V1 3
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3625698 |
| Application ID | qyMztUhbprlN859WBaiQtw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 44.51kB (556372 bits) |
| Date Submitted | 2017-11-02 00:00:00 |
| Date Available | 2017-11-10 00:00:00 |
| Creation Date | 2017-11-01 16:08:50 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2017-11-01 16:09:04 |
| Document Title | ITON BB2710-29 è§„æ ¼ä¹¦ V1.3 |
| Document Creator | Acrobat PDFMaker 9.1 Word 版 |
| Document Author: | Administrator |
BT Module:ZGU36ESLSS MODULE SPECIFICATION Version: 1.0 Model No.:ZGU36ESLSS Part No.: 191D9618G001 HW Version: 1.1 FCC ID:ZKJ-BLEC001 Manufacturer:iTON Technology Corp. BT Module:ZGU36ESLSS CONTENT CONTENT......................................................................................................................... II 1.Summary........................................................................................................................ 1 2.Functional Block Diagram .............................................................................................. 1 3.Module Hardware Characteristic .................................................................................... 2 3.1 RF Specifications ..................................................................................................... 2 3.2 Electrical Characteristics ......................................................................................... 4 4. Connector pin definitions............................................................................................... 5 5. Module Size .................................................................................................................. 6 5.1 Sample Picture ........................................................................................................ 6 5.2 Mechanical Dimensions ........................................................................................... 6 6. FCC statements............................................................................................................7 II BT Module:ZGU36ESLSS III BT Module:ZGU36ESLSS 1.Summary The Module which use the Cypress® CYW20707UA2 that is a single-chip Bluetooth 4.2-compliant, stand-alone baseband processor with an integrated 2.4 GHz transceiver. The Module is the optimal solution for embedded and IoT applications. Built-in firmware adheres to the Bluetooth Low Energy (BLE) profile. Features： 1）Complies with Bluetooth Core Specification version 4.2 including BR/EDR/BLE 2）Supports Broadcom proprietary LE data rate up to 2 Mbps 3）BLE HID profile version 1.00 compliant 4）Bluetooth Device ID profile version 1.3 compliant 5）Supports Generic Access Profile (GAP) 6）Supports Adaptive Frequency Hopping (AFH) 7）Excellent receiver sensitivity 2.Functional Block Diagram BT Module:ZGU36ESLSS 3.Module Hardware Characteristic 3.1 RF Specifications 1.Receiver RF Specifications BT Module:ZGU36ESLSS BT Module:ZGU36ESLSS 2.Transmitter RF Specifications 3.BLE RF Specifications 4.Antenna：PCB Antenna. 5.Antenna Gain: 1.43dBi 3.2 Electrical Characteristics 1. Operation temperature range： -25℃~+85℃ 2. Storage temperature range：-40℃~+125℃ BT Module:ZGU36ESLSS 4. Connector pin definitions 7Pin connector（J101)model:TMM-107-01-F-S-SM 3Pin connector(J105) model:BM03B-XASS-TF J105_1Pin J101_1Pin J101 connector pin definition Pin Signal 3V3 TXD RXD RST RTS CTS GND Description Output voltage:3.3V typ 20707 HCI UART_TX: UART transmit data 20707 HCI UART_RX:UART receive data 20707 Reset :Active-low reset input 20707 HCI UART_RTS: UART request to send output 20707 HCI UART_CTS:UART clear to send input Ground Remark J105 connector pin definition Pin Signal 5V_IN GEA2 GND Description Power supply Range:4V~6.5V(5V typ) Communication signals Ground Remark BT Module:ZGU36ESLSS 5. Module Size 5.1 Sample Picture 5.2 Mechanical Dimensions BT Module:ZGU36ESLSS 6.FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. This device is intended only for OEM inltegrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users,and 2) The transmitter module may not be co-located with any other transmitter or antenna.As long as two conditions above are met,further transmitter test will not be required.However,the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring compliance with the module(s) installed and fully operational.For example,if a host was previously authorized as an unintentional radiator under the Declaration of Conformity procedure without a transmitter certifed module and a module is added,the host manufacturer is responsiblefor ensuring that the after the module is installed and operational the host continues to be compliant with the Part BT Module:ZGU36ESLSS 15B unintentional radiator requirements.The module is limited to OEM installation ONLY. The module is limited to installation in mobile or fxed application.We hereby acknowledge our responsibility to provide guidance to the host manufacturer in the event that they require assistance for ensuring compliance with the Part 15 Subpart B requirements. IMPORTANTNOTE: In the event that thesecond itions cannot be met (for example certain laptop confgurations or co-location with another transmitter),then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product.In these circumstances,the OEM integrator will be responsible for reevaluating the end product(including the transmitter) and obtaining a separate FCC authorization.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Company : P R C Create Date : 2017:11:01 16:08:50+08:00 KSO Product Build Ver : 2052-10.1.0.6930 Modify Date : 2017:11:01 16:09:04+08:00 Source Modified : D:20171101080832 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2017:11:01 16:09:04+08:00 Creator Tool : Acrobat PDFMaker 9.1 Word 版 Document ID : uuid:d30703ac-0879-42eb-927f-265216539486 Instance ID : uuid:160631b8-64f5-41a2-a2a4-85acb8f46ba2 Subject : 2 Format : application/pdf Title : ITON BB2710-29 规格书 V1.3 Creator : Administrator Producer : Adobe PDF Library 9.0 Page Layout : OneColumn Page Count : 11EXIF Metadata provided by EXIF.tools