Handlink Technologies WG-500P Hotspot in a Printer User Manual WG 500P 1025x

Handlink Technologies Inc. Hotspot in a Printer WG 500P 1025x

Contents

User Manual-1

WG‐‐500PHotspottinaPrinterWUse0WG-erM500PManHoPualotspotinaPrinter
WG‐500PHotspotinaPrinter1Copyright Notice Copyright©2013‐2022HandlinkTechnologiesInc.Allrightsreserved.Nopartofthisdocumentmaybecopied,reproduced,ortransmittedbyanymeans,foranypurposewithoutpriorwrittenpermission.ProtectedbyTWpatent223184,JPNpatent3099924,USApatentUS8,010,421B2,EUpatentEP1404056BI,ChinapatentZL03204640.5.Disclaimer Weshallnotbeliablefortechnicaloreditorialerrorsoromissionscontainedherein;norforincidentalorconsequentialdamagesresultingfromfurnishingthismaterial,ortheperformanceoruseofthisproduct.Wereservetherighttochangetheproductspecificationwithoutnotice.Informationinthisdocumentmaychangewithoutnotice.Trademarks MicrosoftWin98,Windows2000,WinXP,WinVistaandWin7areregisteredtrademarksofMicrosoftCorporation.General:Allotherbrandandproductnamesmentionedhereinmayberegisteredtrademarksoftheirrespectiveowners.Customersshouldensurethattheiruseofthisproductdoesnotinfringeuponanypatentrights.Trademarksmentionedinthispublicationareusedforidentificationpurposesonlyandarepropertiesoftheirrespectivecompanies.
WG‐500PHotspotinaPrinter2Contents1Introduction...........................................................................................................41‐1PackageContents...................................................................................51‐2Features.................................................................................................51‐3Precautions............................................................................................61‐4Outlook..................................................................................................61‐4‐1Printingatestpage........................................................................81‐4‐2Howtoloadpaperrolls..................................................................91‐5TechnicalSpecifications.......................................................................101‐5‐1HardwareSpecifications..............................................................101‐5‐2SoftwareSpecifications................................................................112Installation...........................................................................................................142‐1ConnectingtheAntennas....................................................................142‐2InstallationRequirements....................................................................142‐3GettingStart.........................................................................................163ConfiguringtheWG‐500P....................................................................................183‐1SettingWizard......................................................................................183‐2AdvancedSetup...................................................................................283‐2‐1AUTHENTICATION........................................................................293‐2‐1‐1Authentication.....................................................................293‐2‐1‐2RADIUS.................................................................................313‐2‐2BILLING.........................................................................................333‐2‐2‐1Billing....................................................................................333‐2‐2‐2Accounting...........................................................................363‐2‐2‐3CreditCard...........................................................................433‐2‐3MANAGEMENT.............................................................................473‐2‐3‐1Syslog....................................................................................473‐2‐3‐2SessionTrace........................................................................533‐2‐3‐3Bandwidth............................................................................553‐2‐3‐4SNMP....................................................................................563‐2‐4SECURITY......................................................................................573‐2‐4‐1PassThrough........................................................................573‐2‐4‐2Filtering................................................................................593‐2‐4‐3SecureRemote.....................................................................613‐2‐5SYSTEM.........................................................................................623‐2‐5‐1System..................................................................................62
WG‐500PHotspotinaPrinter33‐2‐5‐2WAN/LAN.............................................................................653‐2‐5‐3Server...................................................................................683‐2‐5‐4Customization......................................................................713‐2‐5‐5PortalPage...........................................................................823‐2‐5‐6Advertisement......................................................................833‐2‐5‐7WalledGarden.....................................................................843‐2‐5‐8DDNS....................................................................................853‐2‐5‐9Wireless................................................................................873‐3SystemStatus.......................................................................................903‐3‐1System..........................................................................................913‐3‐2AccountList..................................................................................923‐3‐3AccountLog..................................................................................933‐3‐4CurrentUser.................................................................................943‐3‐5DHCPClients................................................................................953‐3‐6SessionList...................................................................................953‐4SystemTools........................................................................................963‐4‐1Configuration...............................................................................973‐4‐2FirmwareUpgrade.......................................................................983‐4‐3BootCode...................................................................................1003‐4‐4ControllerBoardFirmware........................................................1003‐4‐5SystemAccount..........................................................................1013‐4‐6SSLCertificate............................................................................1053‐4‐7PingCommand...........................................................................1063‐4‐8Restart........................................................................................1063‐4‐9Logout........................................................................................1064QRCodeService.................................................................................................1074‐1QRcodesetting..................................................................................1074‐2AdditionalinformationforQRcodeuse............................................1084‐3UseQRcodetoaccesstheInternet...................................................1095PersonalIDRecognition.....................................................................................1125‐1PersonalIDRecognitionSetting.........................................................113AppendixASignalConnectionArrangements...........................................................117AppendixBRegulations/EMICompliance.................................................................118LIMITEDWARRANTY..................................................................................................119
WG‐500PHotspotinaPrinter41 IntroductionTheWG‐500Pisacompactintelligentgateway.ItprovidesPlug’PlayInternetaccess,advancedsecurityandnetworkmanagement.TheWG‐500Pisdesignedforserviceproviders,systemintegratororhotspotvenueoperatorwithoutbackend‐RADIUS‐Servertohaveintegratedsolutionforrapiddeployment,whichcanstarthotspotservicequicklyandeasilyandenhanceserviceperformance.TheWG‐500Pisanidealsolutionforhotellobbies,coffeebars,airportlounges,conferencefacilitiesandothersitesthatcommonlyhostbusinesstravelers,andoffersinstanthigh‐speedInternetconnections.WithitsIPPlugandPlaytechnology,itacceptsanyclientconfigurationlogin,whenclientopenbrowsertheWG‐500Pimmediatelyrecognizesnewend‐userandredirectstheirbrowsertocustomizedWebpages.There’snoneedforend‐usertochangeanyoftheirdefaultnetwork(StaticIP),e‐mail(SMTPServerbehindfirewall),orbrowsersettings(HTTPProxy)orloadanyspecialsoftwaretoaccesshotspotservice.It’scompletelyPlug’Playwithanybrowser.TheWG‐500PprovidesQRcodeservice.YoucaninstallanyQRcodeAPPtoyourmobiledevice,andthenscanQRcodeonthetickettogetaccessoftheInternet!Youcouldsavethetimetokeytheaccountandthepassword.
WG‐500PHotspotinaPrinter511 PackageContentsPleaseinspectyourpackage.Thefollowingitemsshouldbeincluded: WG‐500Pz OneWG‐500Pz OneThermalpapers(50meter)z OnePowerAdapterz OneEthernetCable(1.5meter)z OneQuickInstallationGuidez TwoDetachableAntennaz OneProductCD Ifanyoftheaboveitemsaredamagedormissing,pleasecontactyourdealerimmediately.12 Featuresz Wirelessdataratesupto300Mbpsz Supportsupto30simultaneousUsersz IPPlugandPlay(iPnP)z Comprehensivesecurity64/128‐bitWEPencryptionWPAencryptionWPA2EncryptionIP/URLfilteringz IntelligentManagementz Built‐inAAA(Authentication/Accounting/Authorization)andBillingmechanismz InternetaccessviaQRcodescanning Note:The"PnP"FunctiononlycanbeusedwithTCP/IP‐basedNetwork.
WG‐1314‐500PHotspot Precauz Neverthesez Neverz Useonseverez Avoidz Choos4 OutlootinaPrinterutionsrremoveorparts.rinstallthenlytheorigeelectricalsexposingthseawell‐veokropenthecsysteminthinalfittingAshock.heWG‐500PntilatedareFigu6cover.YoumhewetlocaACpoweraPtodirectseatopositioure1‐4‐1WG‐maysufferations.dapterothesunlightoraonyourWG500PseriousinjuerwisetheranotherheaG‐500P.uryifyoutoreisadangeatsource.oucherof
WG‐500PHotspotinaPrinter7Figure1‐4‐3RearPanel1. Paper roll housing 2. Printer Cover 3. Tear Bar, for paper cutting 4. Button A 5. Button B 6. Button C 7. Push Button, for printer cover opening 8. Reset Button 9. DC power supply connector 10. RJ45 port 11. Micro USB connector 12. WLAN LED (Green) 13. UPLINK LED(Yellow) 14. SMA connector 15. SMA connector z WLANLED:Off:Thewirelessisnotready.Greenlight:TheWG‐500Phasestablishedavalidwirelessconnection.GreenBlinking:Thewirelessconnectionisactive.Figure1‐4‐2FrontPanel
WG‐500PHotspotinaPrinter8z UPLINKLED:Off:Aporthasnotestablishedanynetworkconnection.Yellowlight:Aporthasestablishedavalid10/100Mbpsnetworkconnection.YellowBlinking:10/100Mbpstrafficistraversingtheport.z ResetButton:TheWG‐500Phasaresetbuttonattherearpanelofthedevice.Usethisfunctiontoresetthesystembacktofactorydefaults.z PowerJack:UsedtoconnecttheexternalpowersupplywiththeWG‐500P.141 PrintingatestpageAfteryouhaveinstalledyourprinter,youshouldprintatestpagetomakesuretheprinterisfunctioningproperly.Todothisactasfollows:1. Turntheprinteroff.2. HolddownthebuttonAforapproximatelyfiveseconds,andthenturntheprinteron.3. Theprinterwillprintatestpage.
WG‐500PHotspotinaPrinter9142 HowtoloadpaperrollsPleasefollowthestepstocorrectlyloadpaperrolls.1 2 3 Figure1‐4‐4Paperrollsloading  4 
WG‐500PHotspotinaPrinter1015 TechnicalSpecifications151 HardwareSpecificationsNetworkSpecificationz IEEE802.310BaseTEthernetz IEEE802.3u100BaseTXFastEthernetz IEEE802.11b/g/nWirelessLANz ANSI/IEEE802.3NWayauto‐negotiationz Wi‐FiCompatibleConnectorsz OneWANPort(10BaseT/100BaseTXAutocross‐over)z OneMicroUSBconnectorEncryptionz WEP(WiredEquivalentPrivacy)64/128‐bitRC4z WPA(Wi‐FiProtectedAccess)z WPA2(Wi‐FiProtectedAccess)ExternalAntennaTypez DualdetachablediversityantennawithreverseSMALEDIndicatorsz OnePOWERLEDz OneWAN10/100MLink/ActivityLEDz OneWirelessLink/ActivityLEDz OneSystemLEDPowerRequirementz ExternalPowerAdapterz Input:100‐240VAC,50/60Hzz Output:12V,1.5A EnvironmentConditionsz OperatingTemperature:0to50°C
WG‐500PHotspotinaPrinter11z StorageTemperature:‐10to60°Cz OperatingHumidity:20~80%non‐condensingz StorageHumidity:20%to90%non‐condensingCertificationsz FCCpart15ClassB,CE,C‐Tick,VCCIDimensionz Size:109×155×90(W×D×H)mmz Weight:About340g(Net) PrinterTrayz Pushbutton:pushtoopenprintercoverz Tearbar:cutsreceiptpaperz ButtonA:flashingwhenprintercoverisopenedz Paperrollhousing:putpaperrollherePaperRollandPrintingz Paperwidth:58(+0/‐1)mmz Paperlength:50M(max.)z Paperthickness:65umz Paperrolloutsidediameter:63(+2/‐2)mmz Paperrollinsidediameter:12(+0.5/‐0)mmz PaperDetection:Photointerrupterz Printingwidth:48mmz PrintingMethod:Directthermalz PrintingSpeed:25.4mm/secz Dotresolution(dots/mm):8(203dpi)z Thermalheadservicelife:1pulsesor50Km152 SoftwareSpecificationsNetworkingz IEEE802.310BaseTEthernetz IEEE802.3u100BaseTXFastEthernetz IEEE802.11bWirelessLANz IEEE802.11gWirelessLANz IEEE802.11nWirelessLAN
WG‐500PHotspotinaPrinter12z Supports30SimultaneousUsersz IPPlugandPlay(iPnP)z HTTPProxySupportz WEP64/128bitz WPA-PSK (TKIP)z WPA2-PSK(AES)z WPA/WPA2 Mix modez SMTPServerRedirectionz DHCPServer(RFC2131)z DHCPRelay(RFC1542)z StaticIPWANClientz DHCPWANClientz PPPoEWANClient(RFC2516)z PPTPWANClientz NAT(RFC1631)z IPRoutingz NTP(NetworkTimeProtocol)Supportz LocalAccount:256z MaxSessionNumber:upto16384MarketingCooperationz AdvertisementURLlinkz Walledgardenz Customizablelog‐onandlog‐offpagesz PortalPageUserAccountingandAuthenticationz Built‐inAuthenticationz Web‐basedAuthenticationz RADIUSAAASupport(RFC2865,2866)z SecondaryRADIUSz UserAuthenticationandAccountingz LogoutWindowTimerControlSecurityandFirewallz Layer2IsolationSecurityz SSLUserLoginpage/ConfigurationPage
WG‐500PHotspotinaPrinter13z SSLAdministrationz VPNPassthrough(IPSec/PPTP)z CustomizeSSLCertificatez PassThroughIP/MAC/URLAddressz RestrictedDestinationFilteringIP/URLz VPN(IPSec/PPTP)Passthroughz PPTPVPNClientz WEPz WPAz WPA2z WPA/WPA2MixmodeManagementz Web‐basedManagementToolz FirmwareUpgradeviaHTTP/TFTPz Wizardsetupforstep‐by‐stepConfigurationz Backup/Restore/FactoryDefaultSettingz RemoteAuthorizedManagementz Real‐timeSessionListz Syslog(System/Subscriber/LANdevice)z E‐maillogsz SNMPv1/v2(MIBII,PrivateMIB)z SystemInformationTablez StatusReport(Daily/Monthly/System/Network)z SSLcertificateupload
WG‐500PHotspotinaPrinter142 Installation21 ConnectingtheAntennasTheWG‐500Pprovidestwoantennaconnectorsontherearoftheunit.22 InstallationRequirementsBeforeinstallingtheWG‐500P,makesureyournetworkmeetsthefollowingrequirements.SystemRequirementsTheWG‐500Prequiresoneofthefollowingtypesofsoftware:z Windows98SecondEdition/NT/2000/XP/Vistaz RedHatLinux7.3orlaterversionz MACOSX10.2.4orlaterversionz AnyTCP/IP‐enabledsystemslikeMacOSandUNIX(TCP/IPprotocolinstalled)z StandardphonelineforxDSLmodemOrCoaxialcableforCablemodemz WebBrowserSoftware(MicrosoftI.E5.0orlaterversionorNetscapeNavigator5.0orlaterversion)z Onecomputerwithaninstalled10Mbps,100Mbpsor10/100MbpsEthernetcardz UTPnetworkCablewithaRJ‐45connection(Packagecontents)Note:Preparetwisted‐paircableswithRJ‐45plugs.UseCat.5cableforallconnections.Makesureeachcablenotexceed328feet(Approximately100meters).ISPRequirementsVerifywhetheryourISPusefixedordynamicIP.IfitisafixedIP,besuretogettheIPfromyourISP.FordynamicIP,whichismostlyused,thePCwillgettheIPautomaticallywheneverithooksuponthemodem.
WG‐500PHotspotinaPrinter15DynamicIPz DynamicIPSettingFixedIPz YourfixedIPaddressfortheWG‐500Pz YoursubnetmaskfortheWG‐500Pz YourdefaultgatewayIPaddressz YourDNSIPaddressPPPoEz YourusernameandpasswordfromyourISPPPTPz PPTPServerIPAddressfromyourISPz PPTPLocalIPaddressfromyourISP.z PPTPLocalIPsubnetmaskfromyourISP.z YourusernamefromyourISPz YourpasswordfromyourISPz YourPCRequirementsTheStaticIPsettingsforthePCz YourPC’sfixedIPaddressz YourPC’ssubnetmaskz YourPC’sdefaultgatewayIPaddressz YourPC’sprimaryDNSIPaddressNote:1.Thegateway’sdefaultIPaddresssettingis“10.59.1.1”.2.Thegateway’sdefaultsubnetmasksettingis“255.255.255.0”.TheDynamicIPsettingsforthePCWerecommendthatyouleaveyourIPsettingsasautomaticallyassigned.Bydefault,theWG‐500PisaDHCPserver,anditwillgiveyourPCthenecessaryIPsettings.
WG‐500PHotspotinaPrinter1623 GettingStartWG‐500PConnection1. ConnecttheDCpoweradaptertotheWG‐500Pandplugitintoapowersocket.2. ConnectWG‐500PandxDSLmodemwithanEthernetCable.Figure2‐3‐1WG‐500PConnection
WG‐500PHotspotinaPrinter17ConfigureTCP/IPofyourcomputerForWindowsuser,1. ClickStart>ControlPanel,clickSwitchtoClassicViewanddoubleclickonNetworkConnections.2. RightclickontheLocalAreaConnectionandclickProperties.3. DoubleclickInternetProtocol(TCP/IP).4. ChooseObtainanIPaddressautomatically.5. ClickOKtoclosetheInternetProtocol(TCP/IP)PropertiesandclickOKagaintoclosetheLocalAreaConnection.Figure2‐3‐2TCP/IPSetting
WG‐500PHotspotinaPrinter183 ConfiguringtheWG500P31 SettingWizardStep1:TheESSID’snamebydefaultisrelatedtothelast4numbersofWlanMAC.IftheWlanMACis“00‐90‐0E‐00‐12‐34＂,thedefaultis“Wireless‐1234_1(2,3,4)".PleaseserachESSID“Wireless‐1234_1＂andconnectit.Step2:Startyourbrowser,andthenenterthefactorydefaultIPaddress10.59.1.1inyourbrowser’slocationbox.PressEnter.Figure3‐1‐1WebBrowserLocationField(FactoryDefault) Step3:TheWG‐500Pconfigurationtoolsmenuwillappear.IntheUsernameandPasswordfield,typethefactorydefaultusernameadminandpasswordadminandclickLogin.Ifyouarefirsttimesettingthesystem,thewizardsetupscreenwillappear.Youwillbeguided,step‐by‐step,throughabasicsetupprocedure.Figure3‐1‐2ConfigurationToolsMenu
WG‐500PHotspotinaPrinter19Figure3‐1‐3WizardSetupScreenFigure3‐1‐4SystemQuickViewNote:1. ThisWebagentisbestviewedwithIE5.0orNetscape6.0andabovebrowsers.2. UsernameandPasswordcanconsistofupto20alphanumericcharactersandarecasesensitive.3. Ifforsomereasonyourpasswordislostoryoucannotgainaccesstothe
WG‐500PHotspotinaPrinter20WG‐500PConfigurationProgram,pleasepresstheresetbuttontoloadthedevicetomanufacturerdefaults.4. IftheWG‐500Pdoesn’tsendpacketin5minutes(default),theWG‐500Pwillslogoutautomatically.5. ProxyneedstosetdisablefirstwhenadministratoraccessesadminUI. Step4:InternetConnectionSettingSelecttheappropriateInternetconnectiontypetoconnecttoyourISP.Figure3‐1‐5InternetConnectionSettingScreenDHCPClientThedevicecanworkasaDHCPclient.ThisallowsthedevicetoobtaintheIPaddressandotherTCP/IPsettingsfromyourISP.IfyourxDSL/Cablecomeswiththisfeature,pleaseenableUseDHCPClient.
WG‐500PHotspotinaPrinter21Figure3‐1‐6InternetConnectionSettingScreenStaticIPSettingIfStaticIPSettingisselected,thenthisscreenwillappear.EntertheIPaddressinformationprovidedbyyourISP.Figure3‐1‐7InternetConnectionSettingScreen—StaticIPSetting
WG‐500PHotspotinaPrinter22ItemDefaultDescriptionIP Address0.0.0.0Enter the IP address provided by your ISP.Subnet Mask0.0.0.0Enter the subnet mask for the IP address.Gateway IP Address 0.0.0.0Enter the Gateway IP Address provided by your ISP.Primary DNS Server EmptyEnter the primary DNS server IP address for the xDSL/Cable connection (provided by your ISP). Secondary DNS Server EmptyEnter the secondary DNS server IP address for the xDSL/Cable connection (provided by your ISP). If the primary DNS Server IP were not available, meanwhile, Secondary DNS Server IP would start in the same time. PPPoE(Point‐to‐PointProtocoloverEthernet)If“PPPoE”isselected,thenthisscreenwillappear.Entertheusername,passwordandothermajorfields.Figure3‐1‐8InternetConnectionSettingScreen—PPPoESettingItemDefaultDescriptionUsername Empty Enter the user name provided by your ISP. The user name can consist of up to 80 alphanumeric characters and is case sensitive.PasswordEmptyEnter the user password provided by your ISP. The password can consist of
WG‐500PHotspotinaPrinter23up to 80 alphanumeric characters and is case sensitive. PPP MTU Setting1492MTU (Maximum Transfer Unit) specifies maximum transmission unit size. TCP MSS Setting1452MSS (Maximum Segment Size) specifies maximum segment size.Service NameEmptyEnter the service name provided by your ISP. The service name can consist of up to 64 alphanumeric characters and is case sensitive. Connect on Demand and Max Idle TimeConnect on Demand EnableYou can configure your WG-500P to cut your connection with your ISP after a specified period of time (Max Idle Time). If you have been disconnected due to inactivity, Connect on Demand enables your WG-500P to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain, click the radio button of keep alive. The Max Idle Time maximum value is 65535 minutes. Max Idle Time10 Minutes Keep alive and Redial PeriodKeep aliveDisableThis option keeps your PPPoE enabled Internet access connected indefinitely, even when it sits idle. The Redial Period maximum value is 65535 seconds. Redial Period30 Seconds 
WG‐500PHotspotinaPrinter24PPTPClient(Point‐to‐PointTunnelingProtocol)IfPPTPSettingisselected,thenthisscreenwillappear.PleaseentertheIPaddress,UsernameandPasswordprovidedbyyourISP.Figure3‐1‐9InternetConnectionSettingScreen—PPPoESettingItemDefaultDescriptionUsernameEmptyEnter the user name provided by your ISP. The user name can consist of up to 80 alphanumeric characters and is case sensitive. PasswordEmptyEnter the user password provided by your ISP. The password can consist of up to 80 alphanumeric characters and is case sensitive. PPP MTU Setting1492MTU (Maximum Transfer Unit) specifies maximum transmission unit size. TCP MSS Setting1452MSS (Maximum Segment Size) specifies maximum segment size.Service NameEmptyEnter the service name provided by your ISP. The service name can consist of up to 64 alphanumeric characters and is case sensitive. Connect on Demand and Max Idle TimeConnect on Demand EnableYou can configure your WG-500P to cut your connection with your ISP after a specified period of time (Max Idle Time). If you have been disconnected due to inactivity, Connect on Demand Max Idle Time10 Minutes
WG‐500PHotspotinaPrinter25enables your WG-500P to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain, click the radio button of keep alive. The Max Idle Time maximum value is 65535 minutes. Keep alive and Redial PeriodKeep aliveDisableThis option keeps your PPPoE enabled Internet access connected indefinitely, even when it sits idle. The Redial Period maximum value is 65535 seconds. Redial Period30 Seconds 
WG‐500PHotspotinaPrinter26Step5:WirelessSettingWirelessSetting:ThispageallowsyoutoChannelIDand802.11Modeforwirelessconnection.Figure3‐1‐10WirelessSettingScreenItemDefaultDescriptionChannel 6 Enter the channel ID for wireless connection. 802.11 Mode 802. 11n + 802.11g + 802.11b Enter the 802.11 Mode for wireless connection. 
WG‐500PHotspotinaPrinter27Step6:SystemSettingSystemSetting:WG‐500Pallowstochangetheadministrator’sUsernameandPassword,andanNTPserversetting.Figure3‐1‐11SystemSettingScreenItemDefaultDescriptionUsername admin Enter the user name. The user name can consist of up to 80 alphanumeric characters and is case sensitive. Password admin Enter the user password. The password can consist of up to 80 alphanumeric characters and is case sensitive. Time ZoneGMTEnter the Time Zone for the system. Manual SettingYYYY/MM/DD HH:MM:SSClick Manual Setting to set the system date and time. NTP Setting Click Update button to correct the system date and time. Secure Administrator IP Address AllThis function allows remote user to management the device. You can specify one or any IP addresses for remote control the system. ClickFINISHbuttontosavethesettingsthenthesystemwillrestart.
WG‐32TheacceAUTBILLMASECSYS Notsett‐500PHotspot AdvaneAdvancedessingtheITHENTICATz AUTHEz RADIULINGz BILLINz ACCOUz CREDIANAGEMENTz SYSLOz SESSIOz BANDWz SNMPCURITYz PASSTz FILTERz SECURTEMz SYSTEz WAN/z SERVEz CUSTOz PORTAz ADVERz WALLEz DDNSz WIREL te:Afterchatings.tinaPrintercedSetupdSettingenternet,incIONENTICATIONUSNGUNTINGTCARDTOGONTRACEWIDTHPTHROUGHRINGREREMOTEM/LANEROMIZATIONALPAGERTISEMENTEDGARDENLESSangetheseenablesyocluding,NTNettingsofde28utoconfievice,pleasigureadvaseclickAppFigurencedsettinplybuttont3‐2‐1AdvancengsrelatedosavetheedSettingItedtonewm
WG‐500PHotspotinaPrinter29321 AUTHENTICATION3‐2‐1‐1 AuthenticationFigure3‐2‐2AuthenticationItemDefaultDescriptionAuthentication TypeNo Authentication Option: No Authentication, Built-in Authentication or User Agreement. No Authentication Subscriber can direct access the Internet without enter username and password. Built-in Authentication WG-500P provides “Built-in Authentication” for service provider to build up an Internet service without any extra authentication software. If “Built-in Authentication” is selected, service provider can generate the subscriber account inside the device, and the system will authenticate the subscriber login according to the generated account.User Agreement Subscriber must accept the service usage agreement before they can access the Internet. Redirect Login Page URL EmptyThe input format can be http://www.yahoo.com. The maximum character of the URL Link is 200. Code Copy and paste the following HTML Code into your home page to produce
WG‐500PHotspotinaPrinter30redirect subscriber login page. CopyandpastethefollowingHTMLCodeintoyourhomepagetoproduceuseragreementloginpage.Figure3‐2‐3PreviewRedirectLoginPageCodeItemDefaultDescriptionCurrent User Information Backup 1 Min(s)The system provides automatically backup account information and unused account to flash ROM. This function allow administrator to adjust the backup time. The default value is 1 minute. The Current User Information Backup valid range is 1 to 1440. SSL Login PageDisableEnables or disables SSL security of login page.User Idle Time Out5 MinutesThe user idle time out valid range is 1-1440.ClickApplybuttontosavethenewsettings.
WG‐500PHotspotinaPrinter313‐2‐1‐2 RADIUSFigure3‐2‐4AuthenticationSettingScreenItemDefaultDescriptionRADIUS AuthenticationDisableOption: No Authentication or RADIUS Server. Disable (No Authentication) Subscriber can direct access the Internet without enter username and password. Enable (RADIUS Authentication) WG-500P provides “RADIUS Authentication” for service provider to build up an Internet service with RADIUS server. If RADIUS Authentication is enabled, all subscribers’ authentication will send to RADIUS Server by RADIUS protocol (RFC 2865, 2866). Time to Finish/ AccumulationEnableService provider provides two different accounting calculate for the Internet service. Primary RADIUS ServerServer IPEmptyEnter the IP address of RADIUS server.Authentication Port1812Enter the authentication port number; the authentication port number must match with the RADIUS server setting. The allowed numbers are from 0 to 65535.
WG‐500PHotspotinaPrinter32Accounting Port1813Enter the accounting port number; the accounting port number must match with the RADIUS server setting. The allowed numbers are from 0 to 65535. Share Secret KeyEmptyThe share secret key, the key number also has to match with the Server setting. Up to 64 characters are allowed. Secondary RADIUS ServerServer IPEmptyEnter the IP address of RADIUS server.Authentication Port1812Enter the authentication port number; the authentication port number must match with the secondary RADIUS server setting. The allowed numbers are from 0 to 65535.Accounting Port1813Enter the accounting port number; the accounting port number must match with the secondary RADIUS server setting. The allowed numbers are from 0 to 65535.Share Secret KeyEmptyThe share secret key, the key number also has to match with the secondary RADIUS Server setting. Up to 64 characters are allowed. Retry times when Primary fail1Specify the retry times when primary fail.Retry Frequency ~ Seconds3The field default value is 3 seconds.Accounting ServiceDisableEnables or disables the accounting service.Interim Update Time5 MinutesSpecify the interim update time.Authentication MethodCHAPCHAP Enter the authentication method of RADIUS server.WISPr Smart ClientEnableDisableEnables or disables WISPr Smart Client roaming function.Login ModeDirectly Reply Options: Directly Reply, Proxy Reply with “Redirect Login Page” URL and Proxy Reply with Specific URL. The login mode information for the IPASS GIS connection. (Provided by your ISP). 
WG‐500PHotspotinaPrinter33322 BILLING3‐2‐2‐1 BillingThefunctionisusedtosetupabillingprofile.Abillingprofileisadescriptionofhowyouwanttochargeyourcustomer.Figure3‐2‐5BillingSettingScreenItemDefaultDescriptionEnable Credit Card ServiceDisableEnables or disables the credit card service. Before you enable credit card service, make sure that your credit service is configured to work and the currency is American dollars. You must be converting all prices on your billing page into American dollars (U.S. dollars). For details, see section 3-2-2-3 Credit Card. The credit card function only supports the American dollars. Time to FinishEnableThe subscriber can access Internet only one time with one account. Once subscriber login, the pre-defined usage time will start until run out even the subscriber stop to access the Internet before run out. AccumulationAccumulationDisableThe subscriber can access Internet many times with one account. The
WG‐500PHotspotinaPrinter34system can keep and accumulate every single usage time until the pre-defined usage time run out. Idle Time Out5 Min(s)The idle time out valid range is 1-1440. If the idle time out is set as 5 minutes, it means if the account doesn’t send packet in 5 minutes, the account will logout automatically. Billing Profile Currency $ Enter the appropriate currency unit or currency symbol. Number of decimals places 2 Enter the number. The field maximum value is 3. Tax Percentage Disable This check box is used to indicate the taxable status of the account. 5% Enter the tax rate (i.e. a 5% sales tax is entered as 5). Active - Click on check box, active or inactive the billing profile. Name - It is the name of billing profile. The maximum allowed characters length is 12. Account Usage time - The duration of the billing period. When this period expires, user account will be discontinued. Charge - Enter the unit rate amount (i.e. 35.00) that most of your accounts are charged for one day of service. 
WG‐500PHotspotinaPrinter35Figure3‐2‐6AccumulationandTimetoFinishFigure3‐2‐7Pre‐paidProcedureDiagram
WG‐500PHotspotinaPrinter363‐2‐2‐2 AccountingThisfunctionallowserviceprovidertogeneratethesubscriberaccounts.Figure3‐2‐8AccountingSettingScreenItemDefaultDescriptionExpirationUn-used account will be deleted after ~hours automatically 24 hoursEnter the number of hours/minutes/days. The field maximum value is 30 hours/minutes/days. Accumulation account will be deleted after last logged in ~ 3 monthsEnter the number and select time unit from list box. The field maximum value is 30 month/ days/ hours. PrintoutNumber of copies to print 1 The system allows you to print all your bills. Select one number of copies by clicking in the list box. Can be Top Up by subscriber Click the check box to enable the Top Up function.
WG‐500PHotspotinaPrinter37Figure3‐2‐9AccountProcessDiagramCanbereplenishedbysubscriber=EnableItemDefaultDescriptionButton A~CDefine each button’s billing profile. Select one billing profile by clicking in the list box. Print to…Account Generator Printer Select a printer to print out your account.Use ~ for Discount Price Plan based on “Button Presses” Button A, Disable Select one button (A~C) by clicking in the list box to assign the base charge and select enable to active the discount price plan. ClickPreview/Operatebuttontopreviewandoperateaccountgeneratorpanel.Figure3‐2‐10AccountGeneratorPanel
WG‐500PHotspotinaPrinter38Figure3‐2‐11AccountGeneratorPrinter(TimetoFinish)Figure3‐2‐12AccountGeneratorPrinter(Accumulation)Note:Beforeconfiguringtheaccounting,youhavetosettingthebillingprofileofWeb‐basedaccountgeneratorpanel.
WG‐500PHotspotinaPrinter39Example: If press 7 times z Discount Price Plan based on “Button Presses” is disabled.Figure3‐2‐13Example1Amount: 7 x $2.00= $14.00Figure3‐2‐14AccountPrintout
WG‐500PHotspotinaPrinter40z DiscountPricePlanbasedon“ButtonPresses”isenabled.z TheChargebylevelisdisabled.Figure3‐2‐15Example2Amount: 7 x $ 1 = $ 7.00 Belowisanexampleoftheaccountprintout.Figure3‐2‐16AccountPrintout
WG‐500PHotspotinaPrinter41z DiscountPricePlanbasedon“ButtonPresses”isenabled.z Chargebylevelisenabled.Figure3‐2‐17Example3 Amount: 2 x $2.00 + 4 x$ 1.50+1x$1= $11.00 Belowisanexampleoftheaccountprintout.Figure3‐2‐18AccountPrintout
WG‐500PHotspotinaPrinter42z DiscountPricePlanbasedon“ButtonPresses”Figure3‐2‐19DiscountPricePlanSettingScreenItemDefaultDescriptionCharge by levelsEnableEnables or disables the charge by levels function.Level1‐10This field displays the level number of charge rate.ConditionsWhen>=The discount conditionButton Presses-Enter the times of pressing buttonUnit Price-Enter the amount of charge levelClickApplybuttontosavethenewsettingsandthesuccessdialogboxappears.ClickonBacktoreturntoAccountingsettingscreen.
WG‐500PHotspotinaPrinter433‐2‐2‐3 CreditCardWG‐500Pprovidesthreecreditcardservices(Authorize.net,iValidate.net,SecurePay,PaypalandWorldPay)thatallowserviceprovidertoauthorize,process,andmanagecredittransactionsdirectlyfromInternet.Figure3‐2‐20CreditCardSettingScreen
WG‐500PHotspotinaPrinter44ItemDefaultDescriptionAuthorize.netVersion3.1This field displays the merchant version.Merchant IDEmptyEnter your Merchant ID. This is a Merchant Identification Number that you’re received from your Merchant Provider. The maximum character of the Merchant ID is 50. Merchant PasswordThis is a Merchant password that you’re received from your Merchant Provider. NeedDisableIf your Merchant Provider need password to authorize, click the check box to enable this function.PasswordEmptyEnter your Merchant password.Merchant Transaction Key EmptyThe Merchant Transaction Key can be obtained directly from “Authorize.net”. The Merchant Transaction Key is similar to a password and is used by the Payment Gateway to authenticate transactions. The maximum character of the Merchant Transaction Key is 50. Payment Gatewayhttps://secure.authorize.net/gateway/transact.dll Enter the address of Payment Gateway.Email Additional Information The Email Additional Information included subscriber username and password would be sent to subscriber. Email Additional Information DisableIndicates whether Email additional information should be sent to the subscriber (customer). Merchant NameEmptyEnter the merchant’s company name. The maximum allowed characters length is 40. Username and Password Enable/Disable DisableThe Email Additional Information included subscriber username and password would be sent to subscriber. Usage Time Enable/Disable DisableThe Email Additional Information included subscriber usage time would be sent to the subscriber. iValidate.netMerchant IDEmptyEnter your Merchant ID. This is a Merchant Identification Number that you’re received from your Merchant Provider. The maximum character of the Merchant ID is 20. Device IDEmptyEnter your Device ID. This is a Device Identification Number that you’re received from your Merchant Provider. The maximum character of the Device ID is 20. Secure Server Addresshttps://www.vious.net/ Enter the secure server address.
WG‐500PHotspotinaPrinter45merchant/processcc.asp Secure PayMerchant IDEmptyEnter your Merchant ID. This is a Merchant Identification Number that you’re received from your Merchant Provider. The maximum character of the Merchant ID is 7. Secure Pay Addresshttps://www.securepay.com.au/securepay/payments/process2.asp Enter the address of SecurePay Payment Gateway.PaypalBusinessEmptyEnter your Merchant PayPal account. This is a Merchant Identification account that you’re register on PayPal. The maximum character of the Business is 127. Currency CodeAustralia dollarTo Drop-down the list. It’s includes Australia dollar, Canadian Dollar, Euro, Pound Sterling, Japanese Yen , U.S. Dollars, Czech Koruna, Danish Kroner, Hong Kong Dollars, Hungarian Forint, New Zealand Dollars, Norwegian Kroner, Polish Zloty, Singapore Dollars, Swedish Kronor, Swiss Francs. Identity TokenEmptyEnter the Identities token form merchants profile in the Paypal site. The maximum character of the Identity Token is 160. Payment Gatewayhttps://www.paypal/cgi-bin/webscr Enter the address of Payment Gateway. The maximum character of the payment gateway is 100. World Pay Payment Gatewayselect.worldpay.com/wcc/purchase Enter the payment gateway address. Installation IDEmptyThe unique reference number, assigned by WorldPay, for a particular Select installation. This is the number you send to WorldPay in your payment form. You will probably have at least two of these; one for the live installation and one for testing. Currency CodeEmptyEnter the currency codeDescriptionEmptyEnter a description of payment pageTest ModeDisable, Success Enables or disables test mode function. Select test mode by clicking in the list box. Success─to make a successful test transaction. Fail─for a failed transaction.Credit Card icons to be Click on check box to display credit card icon on the login page.
WG‐500PHotspotinaPrinter46displayed on the login page ClickApplybuttontosavethenewsettingsandthesuccessdialogboxappears.ClickonBacktoreturntoAccountingsettingscreen.Note:PleaseleavetheAdministrator＇sEmailaddressinAdvanced/Syslog/Emailportion.
WG‐500PHotspotinaPrinter47323 MANAGEMENT3‐2‐3‐1 SyslogThefunctionallowsthedevicetotransmiteventmessagestoyoursyslogserveroryouremailaddressformonitoringandtroubleshooting.SyslogSettingFigure3‐2‐21SyslogSettingScreenItemDefaultDescriptionSend to Syslog Server DisableEnables or disables the syslog server function.Syslog on LANServer IP AddressEmptyEnter syslog server’s IP address. The WG-500P will send all of its logs to the specified syslog server. Server MAC AddressEmptyEnter the syslog server’s MAC address. The WG-500P will send all of its logs to the specified syslog server.
WG‐500PHotspotinaPrinter48ItemDefaultDescriptionSyslog on WANServer 1 IP AddressEmptyEnter IP address of first syslog server.Server 2 IP AddressEmptyEnter IP address of second syslog server. Send to EmailDisableEnables or disables the send to e-mail function.E-mail ServerIP Address or Domain Name EmptyEnter the SMTP server IP address or domain name. The maximum allowed characters length is 50. SMTP Port25The SMTP port allowed range is 25 or 2500 to 2599.E-mail (SMTP) Server needs to check my account DisableIf your SMTP server requires authentication before accepting e-mail, click on check box. These values (username and password) are supplied by your network administrator, SMTP server provider or ISP. UsernameEmptyEnter the username for the SMTP server. The maximum allowed characters length is 64. PasswordEmptyEnter the password for the SMTP serverEmail FromNameEmptyEnter the name you would like to appear in the “message from” field of your outgoing message. The maximum allowed characters length is 20. Email AddressEmptyEnter your e-mail address. This is the address others will use to send email to Email Address 1/Email Address 2. Email ToEmail Address 1EmptyEnter your first e-mail address to receive the logs.Email Address 2EmptyEnter your second e-mail address to receive the logs.ClickApplybuttontosavethenewsettingsandthesuccessdialogboxappears.ClickonBacktoreturntoSyslogsettingscreen.
WG‐500PHotspotinaPrinter49LogCategoriesFigure3‐2‐22LogSettingsScreenItemDefaultDescriptionSystemDevice InformationEvery 10 minute(s)The range is 5~60 minutes. The log included system information would be sent according to specified interval time. Format： PRODUCT=WG-500P:VER=2.00.00;LOGNAME=DVI; DATE=07Mar26;TIME=11:30:00; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; SYS_UP_TIME=14D23H34M21S;WANTXOK=99999; WANRXOK=99999;WANTXERROR=99999;WANRXERROR=99999; LANTXOK=99999;LANRXOK=99999;LANTXERROR=99999; LANRXERROR=99999;WIRELESSTXOK=99999;WIRELESSRXOK=99999; WIRELESSTXERROR=99999;WIRELESSRXERROR=99999; WAN_QUALITY=5; System Up Notice When system If device have been rebooted or restarted, the log would be
WG‐500PHotspotinaPrinter50rebooted or restarted sent. Format： PRODUCT=WG-500P;VER=2.00.00;LOGNAME=SUN; DATE=07Mar26;TIME=15:23:32; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; SYS_NAME=Cafehotspot;LOCATION=East;CITY=Taipei; COUNTRY=Taiwan; FIRMWARE=v1.01.02;MESSAGE=System_Up; Message = System_Reboot System Account Activity Information When system manager login orlogout A log will be sent if system manager (Administrator) login to or logout from the device Format： PRODUCT=WG-500P;VER=2.00.00;LOGNAME=SUN; DATE=07Mar26;TIME=15:23:32; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; SYS_NAME=Cafehotspot;LOCATION=East;CITY=Taipei; COUNTRY=Taiwan; FIRMWARE=v1.01.02;MESSAGE=System_Up; Account Name = Admin | Supervisor | Operator Status= Login | Logout | Idle_Time_Out Firmware Update Notice When firmware update completed A log will be sent if firmware update completed Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=FUN; DATE=07Mar26;TIME=15:23:32; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; MESSAGE=Success;OLD_FRIMWARE=v1.00.01; NEW_FIRMWARE=v1.00.02 Message = Success | Fail Wireless Association Information Every 10 minute(s) The range is range 5~60 minutes. A log including wireless users information will be sent according to specified interval time. Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=WAI;
WG‐500PHotspotinaPrinter51DATE=07Mar26;TIME=15:23:32; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; USER_NUM=15;SEQ=1-5;USER_MAC=02-34-3e-01-00; User User Login When user logged-in A log including users information will be sent when user logged–in Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=ULI;DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12;USER_IP=10.59.1.1; USER_MAC=02-34-3e-01-00;INTERFACE=Ethernet; USER_TYPE=Dynamic; User Type = Dynamic / Super / User Agreement / Radius / No-Auth When User Replenish login format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=URP;DATE=07Mar26;TIME=15:23:32; WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12; REP_USER_NAME=kifm2fs3;USER_IP=10.59.1.1; USER_MAC=02-34-3e-01-00; INTERFACE=Ethernet; USER_TYPE=Dynamic; USED_TIME=24:00:00;TIME_LEFT=24:00:00 User Type = Dynamic / Radius User Logout When user logged-out A log including users information will be sent when user logged –out Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=ULO;DATE=07Mar26;TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12;USER_IP=10.59.1.1; USER_MAC=02-34-3e-01-00;INTERFACE=Ethernet; USER_TYPE=Dynamic;RXDATA=1234; TXDATA=1234; USED_TIME=24:00:00;LOGOUT_TYPE=Time_Up;TIME_LEFT=24:00:0
WG‐500PHotspotinaPrinter520 User Type = Dynamic / Super / User Agreement / Radius / No-Auth Current User List Every 10 minute(s) The range is Range 5~60 minutes. A log including logged-in users information will be sent according to specified interval time Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=CUL;DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NUM=0;SEQ=1-5; USER_NAME=asdfg12,USER_IP=10.59.1.2,USER_MAC=02-34-3e-01-00, INTERFACE=Ethernet,USER_TYPE=Dynamic,RXDATA=1234, TXDATA=1234,USED_TIME=24:00:00,SESSION=100,WLAN_SIG=N/A;USER_NAME=dk6uf2eg,USER_IP=10.59.1.3,USER_MAC=02-34-3e-01-02, INTERFACE=Wireless,USER_TYPE=Dynamic,RXDATA=1234, TXDATA=1234,USED_TIME=24:00:00,SESSION=100,WLAN_SIG=100%; User Type = Dynamic / Super / User Agreement / Radius / No-Auth User Name = If the type of user is Super/User Agreement/No-Auth , the username=**** Account and Billing Account Information When an account is created A log will be sent when an account is created Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=ACI;DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12; ACCOUNT_TYPE=TimetoFinish; ACCOUNT_SERIAL=000002; ACCOUNT_PRICE= USD20.00; ACCOUNT_USAGE_TIME=10:59:59; BILLING_INDEX=1;BILLING_UNIT=2; Account Type = TimeToFinish / Accumulation / PostPaid Account Price = Currencyxx.xx Currency = AUD | CHF | EUR | GBP | JPY | RIY | USD Billing Amount When received amount A log will be sent when received amount Format:
WG‐500PHotspotinaPrinter53PRODUCT=WG-500P;VER=2.00.00;LOGNAME=BLA; DATE=07Mar26;TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=username; BILL_TYPE=Cash, BILL_AMOUNT= USD50.00 Billing Type= Cash | Credit_Card； Billing Amount = xx.xx Currency = AUD | CHF | EUR | GBP | JPY | RIY | USD…… ClickApplybuttontosavethenewsettingsandthesuccessdialogboxappears.ClickonBacktoreturntoLogssettingscreen.3‐2‐3‐2 SessionTraceSessionTraceisanintelligentfunctiontohelpserviceprovidertotraceeveryuser’saccessbehavior.When“sessiontrace”isenable,thesystemwillcollectinformationsuchlikedestinationIP,destinationport,sourceIP,sourceMAC,sourceportbyeveryuserandsendthecollectedinformationintextformatfiletospecifiedTFTPserverorEmailServer.Figure3‐2‐23SessionTraceSettingScreen
WG‐500PHotspotinaPrinter54ItemDefaultDescriptionTFTP Server Session TraceDisableDisables or enables session trace function.Primary TFTP Server IP Address EmptyEnter the IP address of the primary TFTP server.Secondary TFTP Server IP Address EmptyEnter the IP address of the second TFTP server. Send Session Trace log file every~ minutes. 10 minutesThe field means to send the session trace log file every interval minutes. The value range is 5 to 1440 (minutes). Send to EmailDisableEnables or disables the send to e-mail function.E-mail ServerIP Address or Domain Name EmptyEnter the SMTP server IP address or domain name. The maximum allowed characters length is 50. SMTP PortEmptyThe SMTP port allowed range is 25 or 2500 to 2599.E-mail (SMTP) Server needs to check my account DisableIf your SMTP server requires authentication before accepting e-mail, click on check box. These values (username and password) are supplied by your network administrator, SMTP server provider or ISP. UsernameEmptyEnter the username for the SMTP server. The maximum allowed characters length is 64. PasswordEmptyEnter the password for the SMTP serverEmail FromNameEmptyEnter the name you would like to appear in the “message from” field of your outgoing message. The maximum allowed characters length is 20. Email AddressEmptyEnter your e-mail address. This is the address others will use to send email to Email Address 1/Email Address 2. Email ToEmail Address 1EmptyEnter your first e-mail address to receive the logs.Email Address 2EmptyEnter your second e-mail address to receive the logs.
WG‐500PHotspotinaPrinter553‐2‐3‐3 BandwidthThefunctionenablesadministratortolimitbandwidthusageonaperuserbasis(MACaddress).Thatpreventsusersfromconsumingadisproportionatelylargeamountofbandwidthsoeveryusergetsafairshareoftheavailablebandwidth.Figure3‐2‐24BandwidthSettingScreenItemDefaultDescriptionBandwidthDisableEnables or disables Bandwidth Management.Maximum Upstream64KbpsSpecify the amount of upstream bandwidth.Maximum Downstream128KbpsSpecify the amount of downstream bandwidth.
WG‐500PHotspotinaPrinter563‐2‐3‐4 SNMPTheSNMPAgentConfigurationscreenenablesyoutoaccesstoyourdeviceviaSimpleNetworkManagementProtocol.IfyouarenotfamiliarwithSNMP,pleaseconsultyourNetworkAdministratororconsultSNMPreferencematerial.YoumustfirstenableSNMPontheSNMPAgentConfigurationscreen.Figure3‐2‐25SNMPSettingScreenItemDefaultDescriptionSNMPDisableDisables or enables the SNMP management.SNMP Port161If the SNMP enables, also allowed to specific the SNMP port number via NAT. The allowed SNMP port numbers are 161(default), 16100-16199 and Trap port numbers are 162 (default), 16200-16299. This Port setting is useful for remote control via NAT network. Trap Port162ConfigurationCommunity Namepublic/privateEvery unit with SNMP enable must be configured to recognize one or more community names up to 20 characters. The default setting for the community of entry 1 is “public” and for the entry 2 is “private” and others are empty. NMS AddressANYThe address of the NMS. The default settings for the NMS Networking are “ANY”. PrivilegesRead/WriteChoose “Read”, “Write”, “Trap Recipients” and “All” for different privileges. The default setting of the entry 2 is “write” and others are “read”. Status Valid/Invalid Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are valid and others are invalid.
WG‐500PHotspotinaPrinter57324 SECURITY3‐2‐4‐1 PassThroughThisfunctionallowadministratortosetsomespecialdevicespassthroughtheWG‐500Psystem.BecausesomenetworkdevicesmightbeconstructedundertheWG‐500P.Howeverthesedevicesneedn’tbecheckedandauthorized.TheWG‐500Pprovidesapassthroughlistandtheadministratorcancontrolwhichdevicescanbepassthroughwithauthentication.Figure3‐2‐26PassthroughSettingScreenItemDefaultDescriptionPass ThroughDisableEnables or disables the pass through function.Destination URL/IP Address Pass ThroughURL or WebsiteEmptyEnter the URL Page; please use this format such like “http://www.yahoo.com”. The maximum character of the URL Page is 50. Note: 1. Please add www.apple.com into PASS THROUGH list in WG-500P. (iOS 6 device and later is required.) 2. Please add go.redirectingat.com for certain QR code apps.
WG‐500PHotspotinaPrinter58Start / End IP AddressEmptyEnter the start / end IP address of you wants pass through. Subscriber IP/MAC Address or LAN Device Pass ThroughStart / End IP AddressEmptyEnter the start / end IP address of you wants pass through.IP AddressEmptyEnter the IP address of you wants pass through.Subnet MaskEmptyEnter the subnet mask of you wants pass through.MAC AddressEmptyEnter the MAC address of you wants pass through.MaskEmptyEnter the subnet mask of you wants pass through.Pass Through ListDisplay the pass through Information of WG-500P.No.-The index number of pass through address.ActiveDisableClick on check box, active or inactive the pass through address.Address List-Display the pass through address(s).Type - Display the type of pass through address. Delete Disable Select the check boxes and click ‘Delete’ to delete the pass through address(s). ClickAddtoListbuttontoaddanewentry.ClickApplybuttontosavethenewsettings.ClickDeleteAll&Applybuttontodeleteallentries.Note:Thepriorityof"passthrough"ishigherthan"Filtering".
WG‐500PHotspotinaPrinter593‐2‐4‐2 FilteringFilteringallowsthesystemadministratortohavealistofrestricteddestinations,whichisusefultoblockspecifiedInternetwebsitesorIntranetareas.Figure3‐2‐27FilteringSettingScreenItemDefaultDescriptionFilteringDisableEnables or disables filtering function.HTTP Message to display when a website is blocked The Web Site is blocked by SystemEnter the http message. The maximum character of the HTTPmessage is 200.Restrict DestinationURL or WebsiteEmptyEnter the URL Page of you wants to filter; please use this format such like “http://www.yahoo.com”. The maximum character of the URL Page is 50. Start IP AddressEmptyEnter the start IP address of you wants to filter.IP AddressEmptyEnter the destination IP address of you wants to filter.Subnet MaskEmptyEnter the destination subnet mask.No‐ The index number of filtering address.ActiveDisableClick on check box, active or inactive the filtering address.

Navigation menu