Handlink Technologies WG-500P Hotspot in a Printer User Manual WG 500P 1025x

Handlink Technologies Inc. Hotspot in a Printer WG 500P 1025x

Contents

User Manual-2

WG‐500PHotspotinaPrinter60Address List‐ Display the filtering address(s).DeleteDisableSelect the check boxes and click ‘Delete’ to delete the filtering address(s). ClickAddtoListbuttontoaddanewentry.ClickApplybuttontosavethenewsettings.ClickDeleteAll&Applybuttontodeleteallentries.
WG‐500PHotspotinaPrinter613‐2‐4‐3 SecureRemoteThisfeatureallowsyoutocreateasecureconnectiontoaremotesiteorbackendsystemwithVPNPPTPClient.If“SecureRemote”isenabled,theRADIUSpacket/syslogwillbetransferredtothissecureconnection.Figure3‐2‐28SecureRemoteSettingScreenItemDefaultDescriptionAuto-connect at Start-up (Always connect) DisableEnable the check box to automatically establish the PPTP connection. PPTP Server IP address EmptyEnter the PPTP server IP address provided by your ISP.UsernameEmptyEnter the user name provided by your ISP. The user name can consist of up to 80 alphanumeric characters and is case sensitive.PasswordEmptyEnter the user password provided by your ISP. The password can consist of up to 80 alphanumeric characters and is case sensitive. start/stopconnectionClick on Start/Stop connection button to start/stop PPTP connection. VPN TunnelDisplay the status.Client IPDisplay the IP address.Clickrefreshbuttontodeleteallentries.
WG‐500PHotspotinaPrinter62325 SYSTEM3‐2‐5‐1 SystemDefinetheWG‐500PSystemconfiguration.Figure3‐2‐29SystemSettingScreen
WG‐500PHotspotinaPrinter63ItemDefaultDescriptionSystem/Host NameEmptyThe system name can consist of up to 40 alphanumeric characters. Domain NameEmptyThe Domain name can consist of up to 80 alphanumeric characters. Location InformationEmptyEnter your location information.Date/TimeTime ZoneGMTSelect the appropriate time zone for your location. Manual SettingClick Manual Setting to set the system date and time. DateYear/Month/DayEnter the Date for the system.TimeHour:Minute:Second Enter the Time for the system.NTP SettingEnable Enables or disables NTP (Network Time Protocol) Time Server. Network Time Protocol can be utilized to synchronize the time on devices across a network. A NTP Time Server is utilized to obtain the correct time from a time source and adjust the local time. Server IP/Domain NameEmpty Enter the IP address/domain name of NTP server. The maximum allowed characters length is 100. Update Time0 hours Enter the number of hours for update time.Daylight Saving TimeDisableEnables or disables Daylight Saving Time (DST).Month/DaySet the Daylight Saving Time (DST) on the WG-500P. Adjust the begin time and end time. NAT (Network Address Translation)NATEnableEnables or disables NAT Address Translation function.User Session LimitedEnable,300Enables or disables user session limit function. This feature provides you an ability to control a number of sessions allowed for particulars user(s) at the one time. IP Plug and Play (iPnP Technology) EnableEnables or disables plug & play function. When enabled, the user needn’t change their network configuration to access the Internet. Layer 2 Isolation SecurityEnableIf enable plug and play is selected, you can enable Layer 2 Isolation Security function. When the “Layer 2 Isolation Security” enabled, everyone cannot communicate with each other. Secure administrator IP AnyOptions: Any and Specify. Administrator can specify 5 IP
WG‐500PHotspotinaPrinter64Addresses addresses or a range to allow remote control access from network. Multicast Pass ThroughEnableThis function allows for multiple transmissions to specific recipients at same time. Allow remote user to ping the device EnableThis function allows remote user to ping the WG-500P through Internet. Ping is normally used to test the physical connection between two devices, to ensure that everything is working correctly. SSL CertificateEnableOption: default or customize certificate, These are two ways to create a certificate, one is purchase a certificate from a certificate authority (Ex. Verisign or Thawte), and another is creating a self-certificate (For example: Uses OpenSSL tool).Personal ID Recognition mode Disable Some countries or areas will ask WiFi users to offer personal ID recognition according to the law for the Internet crime investigation. If you would like to active PIR function, please refer to the Chapter 5 Personal ID Recognition. ClickApplybuttontosavethenewsettings.
WG‐500PHotspotinaPrinter653‐2‐5‐2 WAN/LANFigure3‐2‐30WAN/LANSettingScreen
WG‐500PHotspotinaPrinter66ItemDefaultDescriptionLANIP Address10.59.1.1The internal LAN IP address of your Wireless Subscriber Server Gateway. Subnet Mask255.255.255.0Enter the subnet mask for the IP address.WAN MAC AddressIP AddressThe default MAC address is set to the WAN physical interface on device.DHCP ClientThe device can work as a DHCP client. This allows the device to obtain the IP address and other TCP/IP settings from your ISP. If your xDSL/Cable comes with this feature, please enable Use DHCP Client. Static IPIP AddressEnter the IP address for the xDSL/Cable connection (provided by your ISP). Subnet MaskEnter the subnet mask for the IP address.Gateway IP GatewayEnter the Gateway IP address for the xDSL/Cable connection (provided by your ISP). Primary DNS ServerA primary DNS server IP address for the xDSL/Cable connection (provided by your ISP). Secondary DNS ServerA secondary DNS server IP address for the xDSL/Cable connection (provided by your ISP). If the primary DNS Server IP were not available, meanwhile, Secondary DNS Server IP would start in the same time. PPPoEUser NameEmptyEnter your PPPoE account name. The user name can consist of up to 80 alphanumeric characters and is case sensitive. PasswordEmptyEnter your PPPoE password. The password can consist of up to 80 alphanumeric characters and is case sensitive. PPP MTU Setting1492MTU (Maximum Transfer Unit) specifies maximum transmission unit size. TCP MSS Setting1452MSS (Maximum Segment Size) specifies maximum segment size. Service NameEmptyEnter the service name provided by your ISP. The service name can consist of up to 64 alphanumeric characters and is case sensitive. Connect on DemandEnableYou can configure your WG-500P to cut your connection with your ISP after a specified period of time (Max Idle Time). If you have been disconnected due to inactivity, Connect on Demand enables your WG-500P to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain, click the radio button of keep alive. The Max Idle Time maximum value is 65535 minutes. Max Idle Time10 Minutes
WG‐500PHotspotinaPrinter67Keep aliveDisableThis option keeps your PPPoE enabled Internet access connected indefinitely, even when it sits idle. The Redial Period maximum value is 65535 seconds. Redial Period30 Seconds
WG‐500PHotspotinaPrinter683‐2‐5‐3 ServerServerFigure3‐2‐31ServerSettingScreenItemDefaultDescriptionWeb ServerHTTP Port80Enter the HTTP port number. The HTTP port allowed range is 80 or 8010 to 8060. For access the WG-500P system under NAT, please tab the “http://HTTP Port IP Address: Port Number”. HTTPS Port443Enter the HTTPS port number. The HTTPS port allowed range is 443 or 4430 to 4440. For access the WG-500P system, please tab the “https://HTTPS Port IP Address: Port Number”. Administrator Idle-Timeout 5 MinutesThe idle time out valid range is 1-1440. If the idle time out is set as 5 minutes, it means if the administrator doesn’t send packet in 5 minutes, the administrator will logout automatically. DHCP ServerEnableThere are three types of DHCP Services. DHCP Disable—Disable the DHCP server function. DHCP Relay—Enable DHCP Relay function.
WG‐500PHotspotinaPrinter69DHCP Server—Enable DHCP server function.DHCP RelayTo route DHCP through an external server, the administrator needs to enable the DHCP relay and assign a valid DHCP server IP address. DHCP Server IP AddressEmptyEnter the IP address of DHCP server.DHCP ServerThe WG-500P's DHCP server is turned on and running by default when you install it in your network. DHCP Pool Starting Address10.59.1.2Enter the DHCP Pool Starting IP address.Pool Size253The DHCP pool size range is 1 to 512.Lease Time300 MinutesThe DHCP lease time. The DHCP lease time range is 1 to 71582788 minutes. Primary DNS Server168.95.1.1Enter the IP address of the network’s primary DNS server.Secondary DNS ServerEmptyEnter the IP address of a second DNS server on the network. Email Server RedirectTo prevent some subscriber’s original Email server may protect by firewall or NAT network. WG-500P provides an extra Email server parameter to forward the subscriber’s Email. The WG-500P not only forwards the subscribers’ E-mail via other E-mail server but also changes the SMTP header. The recipient of your E-mail sees the message as if you sent it from your local Internet Service Provide, not form the hotel or other place. Note: Before setting this sever, please make sure the e-mail sever relay function is opened. It must not exceed 50 characters. IP Address or Domain NameEmptyEnter the E-mail server IP address or domain name.SMTP Port25Enter the SMTP port number for mail server. The SMTP port allowed range is 25 or 2500 to 2599. ClickApplybuttontosavethenewsettings.
WG‐500PHotspotinaPrinter70StaticDHCPThisfunctionallowssubscribertoassignIPaddressontheLANtospecificindividualcomputersbasedontheirMACAddress.Figure3‐2‐32ServerSettingScreenItemDefaultDescriptionIP AddressEmptyEnter the IP address that subscriber want to assign to the computer on LAN with the MAC address the subscriber will also specify. MAC AddressEmptyEnter the MAC address of a computer on your LAN.ClickApplybuttontosavethenewsettings.
WG‐500PHotspotinaPrinter713‐2‐5‐4 CustomizationLoginPageTheWG‐500Pprovidesthreedifferentloginpageformats,includingstandard,redirect,advancedandframeformat.Figure3‐2‐33CustomizationSettingScreen
WG‐500PHotspotinaPrinter72ItemDefaultDescriptionStandardFor some service providers, they may hope to have a customize subscriber’s login page to the users. This function helps them to realize the ideal. The page elements are including login page title, background color, subtitle etc. LogoDisableSelect the check box to display service provider’s logo.TitleWelcomeEnter the title name of subscriber login page. The maximum allowed characters length is 80.SubtitleHot Spot Internet Service Enter the subtitle name of subscriber login page. The maximum allowed characters length is 80. FootnoteDisableAllow the administrator to input the footnote such like “Pleas Contact to our Customer Service Center, EXT 141”. The maximum character of the footnote is 240. CopyrightEnableThe copyright is allowed the administrator to input a paragraph in the subscriber login page for copyright information. The maximum character of the copyright is 80. Background ColorFFFFFFThe background text color can be specified color. For the specified text color format please views the color grid. The allowed format is Hexadecimal.Figure3‐2‐34LoginPageScreen RedirectThis allow service provider to redirect the subscriber’s browser to a specified home
WG‐500PHotspotinaPrinter73page.Copy and paste the following HTML Code into your home page to produce redirect subscriber login page. Figure3‐2‐35Preview Redirect Login Page Code AdvancedThis function allow user to design login page of WG-500P.Welcome SloganWelcomeThe maximum allowed characters length is 80.Page BackgroundNoneThe page background can be none or specified color. For the background color format please views the color grid. The allowed format is Hexadecimal. ArticleEmptyThe article is allowed the administrator to input a paragraph in the subscriber login page for advisement or announcement. The maximum character of the article is 1024. Article Text Color000000The article text color can be specified color. For the specified text color format please views the color grid. The allowed format is Hexadecimal. Article Background ColorNoneThe article background can be specified color. For the background color format please views the color grid. The allowed format is Hexadecimal. InformationEmptyAllow the administrator to input the text information such like address, telephone number and fax information. The maximum character of the information is 80. CommentsEmptyAllow the administrator to input the text comments such
WG‐500PHotspotinaPrinter74like “Please Contact to our Customer Service Center, EXT 141”. The maximum character of the comment is 80. FrameIf “Frame” is selected the subscriber login page will be separate into Top Frame and Bottom Frame. Bottom Frame is a default format for username and password input, Top Frame is allowed to be specified a URL to link.Top Frame URL LinkEmptyThe input format can be http://www.yahoo.com. The maximum character of the URL Link is 200. Bottom Frame‐ This frame will show the standard login page.Figure3‐2‐36Example‐LoginPageScreen
WG‐500PHotspotinaPrinter75LogoThisfunctionallowsserviceprovidertouploadthecustomer’slogoimagefilewhichcanbeshownonthestandardloginpageandaccountprintoutofPC‐connectedprinter.Figure3‐2‐37LogoSettingScreenItemDefaultDescriptionFile PathEmptyEnter the file pathname of the logo file in the File Path field.ClickApplybuttontosavethelogofiletosystem.ClickDeletebuttontodeletethelogofile.
WG‐500PHotspotinaPrinter76InformationWindowThisfunctionallowserviceprovidercandecidewhethertheywantan“InformationWindow”pop‐uponsubscriberPCwhenauthenticatesuccessfulornotandspecifiedtextofinformationwindow.Subscribercantype“http://1.1.1.1/info”toopentheinformationwindowagainorenter“http://1.1.1.1/logout”tologoutimmediatelyifaccumulationbillingselected.Figure3‐2‐38Example‐LoginPageScreenFigure3‐2‐39InformationWindow
WG‐500PHotspotinaPrinter77Billing Type=Time to Finish Can be replenished by subscriber=Enable Figure3‐2‐40InformationWindow Billing Type=Accumulation Can be replenished by subscriber=Disable Figure3‐2‐41InformationWindowBilling Type=Accumulation Can be replenished by subscriber=Enable Figure3‐2‐42InformationWindow
WG‐500PHotspotinaPrinter78AccountPrintoutThisfunctionallowserviceprovidertospecifiedtextofaccountprintout.Figure3‐2‐43AccountPrintoutCustomizationSettingScreenNote:Ifyoudon’tprintoutQRcodeontheticket,pleasedisable“QRCode”.
WG‐500PHotspotinaPrinter79CreditCardFigure3‐2‐44CreditCustomizationSettingScreen
WG‐500PHotspotinaPrinter80ItemDescription Standard Login PageThis function allow service provider to customize the additional credit card message for the standard login page. Service Selection PageThis function allow service provider to customize the additional credit card message for the standard login page. Fail PageThis function allow service provider to customize the message for the fail page.ClickApplybutton,thesuccessdialogboxappears.ClickonBacktoreturntoCreditCardCustomizationsettingscreen.
WG‐500PHotspotinaPrinter81UserAgreementPageThisfunctionallowusertodesignuseragreementpageofInternetSubscriberServer.Figure3‐2‐45UserAgreementPageSettingScreen
WG‐500PHotspotinaPrinter823‐2‐5‐5 PortalPageThisfeatureallowsredirectingsubscriber’sbrowsertoaspecifiedportalpageaftersuccessfullogin.Figure3‐2‐46PortalPageSettingScreenItemDefaultDescriptionURL LinkEmptyEnter the URL Link page. The input format can be “http://www.yahoo.com”. The maximum character of the URL Link is 200. ClickApplybutton,thesuccessdialogboxappears.ClickonBacktoreturntoPortalPagesettingscreen.
WG‐500PHotspotinaPrinter833‐2‐5‐6 AdvertisementThesystemallowserviceprovidertoinput5URLlinksforadvertisementlinkpurpose.Figure3‐2‐47AdvertisementURLLinkSettingScreenItemDefaultDescriptionFrequencyOne Time Only One Time Only—One Time Only means to send the advertisement link once after the subscriber Login. Every~Min(s)—The field means to send the advertisement link every interval minutes. The value range is 1 to 60 (minutes). SequenceRandomlyRandomly—Display the advertisement page in the random order. From 1 to 10 —Display the advertisement page in the order as setting. URL Link 1~5 EmptyThis function allows the administrator to input ten different websites in the table for advertisement. And these 5 websites will display to the subscribers at random when the subscribers login in the WG-500P system. The input format can be “http://www.yahoo.com”. The maximum character of the URL Link # is 200. ClickApplybutton,thesuccessdialogboxappears.ClickonBacktoreturntoAdvertisementURLLinksettingscreen.
WG‐500PHotspotinaPrinter843‐2‐5‐7 WalledGardenWepreparetenURLlinksthatallowssubscribertoaccessthespecificWebpageseventheydidn’thaveausernameorpassword.It’sfreetryingandcanuseforadvertisement.Figure3‐2‐48WalledGardenSettingScreenItemDescriptionNameThe name is allowed user to set the prompt string in user customize login page. The maximum allowed characters length is 80. URL 1~5 The input format can be “http://www.yahoo.com”. The maximum character of the Link# is 200. ClickApplybutton,thesuccessdialogboxappears.ClickonBacktoreturntoWalledGardensettingscreen.
WG‐500PHotspotinaPrinter853‐2‐5‐8 DDNSTheDDNSservice(DynamicDomainNameService),anIPRegistryprovidesapubliccentraldatabasewhereinformationsuchasemailaddresses,hostnames,IPaddressesetc.canbestoredandretrieved.ThissolvestheproblemsifyourDNSserverusesanIPassociatedwithdynamicIPaddresses.WhentheISPassignstheWG‐500PanewIP,theWG‐500PmustinformtheDDNSserverthechangeofthisIPsothattheservercanupdateitsIP‐to‐DNSentry.OncetheIP‐to‐DNStableintheDDNSserverisupdated,theDNSnameforyourwebserver(i.e.,xyz.dyndns.org)isstillusable.Figure3‐2‐49DDNSSettingScreen
WG‐500PHotspotinaPrinter86ItemDefaultDescriptionForce to update every~day(s) when WAN IP address keeps no change 1 dayEnter a number in the field to set the force update interval (in days). No01~03The index number of a DDNS account.ActiveDisableClick on check box, active or inactive the DDNS record.UpdateStatusNowClick the Update Status Now button to do manual update.SettingsEnter the account information of DDNS Server.StatusYY/MM/DD HH:MM:SSDisplay the update date, time and status. The Status area shows the update time and current state of the DDNS Client. N/A—DDNS Client service not installed. Update Successfully—DDNS Client service installed; service running. Update Fail—DDNS Client service installed; service not running. Service ProviderDyndns.org (www.dyndns.org)Select a DDNS service provider by clicking in the list box. Note: Before configuring the DDNS settings, you have to register a dynamic domain at one of the dynamic domain service providers’ list box. Registered Host NameEmptyEnter the host name of DDNS server. The maximum character of the registered host name is 100. Login NameEmptyEnter the user name of DDNS server.PasswordEmptyEnter the user password of DDNS server.Email AddressEmptyEnter your email address. The DDNS Server will e-mail you important information once your Internet Name has been successfully registered. Wildcards (optional)DisableEnable this function to be able to use *.mydomain.dyndns.org and not only mydomain.dyndns.org. ClickApplybutton,thesuccessdialogboxappears.ClickonBacktoreturntoDDNSsettingscreen.
WG‐500PHotspotinaPrinter873‐2‐5‐9 WirelessFigure3‐2‐50WirelessSettingScreen
WG‐500PHotspotinaPrinter88ItemDefaultDescriptionGeneral SettingsWireless ConnectionEnableTo Enable or Disable wireless connection.Channel6Select the channel ID for wireless connection. Multiple ESSID SettingClick Edit button for each of 4 ESSID setting.Figure3‐2‐51EDDIDSettingScreenGeneral SettingsESSIDThe ESSID’s name by default is related to the last 4 numbers of Wlan MAC. If the Wlan MAC is“00-90-0E-00-12-34＂, the default is“Wireless-1234_1(2,3,4)". It is case sensitive and must not exceed 32 characters. Security SettingsSecurityOpen Select Open to allow wireless station to communicate with the device without any data encryption. Select WPA / WPA2 / MixMode for data encryption. Group Key Re-Keying 86400 SecondsEnter a number in the field to set the force re-keying interval.Use WPA or WPA2 with Pre-shared Key Disable Pre-Shared Key Empty Enter a pre-shared key from 8 to 63 case sensitive ASCII characters. Use WPA or WPA2 with 802.1x Disable RADIUS Server IP/DomainEmptyEnter the RADIUS server IP address or domain name. The maximum allowed characters length is 15. Authentication PortEmptyEnter the authentication port number. The allowed numbers
WG‐500PHotspotinaPrinter89are from 0 to 65535. Share Secret KeyEmptyEnter the RADIUS secret keyBeacon Interval200This value valid range is 1 to 1000 indicates the frequency interval of the beacon. RTS Threshold2347This value valid range is 256-2342. This setting determines the packet size at which the WG-500P issues a request to send (RTS) before sending the packet. A low RTS Threshold setting can be useful in areas where many client devices are associating with the WG-500P, or in areas where the clients are far apart and can detect only the WG-500P and not each other. Fragmentation Threshold 2432This setting determines the size at which packets are fragmented. Enter a setting ranging from 256 to 2432 bytes. Use a low setting in areas where communication is poor or where there is a great deal of radio interference. Preamble Type Long Preamble The preamble type is a section of data at the head of a packet that contains information the WG-500P and client devices need when sending and receiving packets. The setting menu allows you to select a long, short or dynamic preamble type. ClickApplybutton,therestartdialogboxappears.ClickonApplytorestartthesystem.ClickDefaultbuttontoloadthedefaultmanufacturerconfigurationtothesystem.Allthispage(Wireless)configurationsetupwillbereplacedbydefaultsettings.
WG‐33Disp1. 2. 3. 4. 5. 6. ‐500PHotspot SystemplayWG‐50SystemAccountLisAccountLoCurrentUseDHCPClienSessionListtinaPrintermStatus00PsystembstogerntstbasicstatusFigure3‐3‐190s,including,SystemStatu,sItemScreenn
WG‐500PHotspotinaPrinter91331 SystemTheSystemInformationMenudisplayscurrentsystembasicinformationincludingtheserviceconnectionmessage,hostname,LAN,WAN,DHCPConfiguration,DNS,E‐mailRedirection,SSLCertificate,networktrafficInformationandthesystemfirmwareversionnumber.Figure3‐3‐2SystemStatusScreen
WG‐500PHotspotinaPrinter92332 AccountListYoucandisplayalistofalltheaccountinformationonthisdevice.Thistableincludestheusername,password,usagetime,timecreated,logintime,expirationtimeandstatus.Figure3‐3‐3AccountListClickrefreshbuttontoupdatetheaccountlistpage.Clickthecolumnbutton(S/N,Status,Username,….,etc.)tosortthecolumninascending/descendingorder.SelectthecheckboxesandclickDeletetodeletetheaccounts.ClickDeleteALLbuttontodeleteallaccountsinaccountlist.Note:Thispagewillrefreshautomaticallyevery5minutes.
WG‐500PHotspotinaPrinter93333 AccountLogTheaccountlogshowstheaccounts’loginformation.Figure3‐3‐4AccountLogClickExporttoexporttheaccountlogstoatextfileformat.(export.log)ClickClearLogbuttontoremoveallaccountlogentries.Clickrefreshbuttontoupdatetheaccountlogpage.Clickthecolumnbutton(S/N,Username,TimeCreated,…,etc.)tosortthecolumninascending/descendingorder.
WG‐500PHotspotinaPrinter94334 CurrentUserDisplaythecurrentlogged‐insubscribers’status.Itallowserviceprovidertodisconnectanysubscribers.Figure3‐3‐5CurrentUserListClickrefreshbuttontoupdatethecurrentuserlistpage.Clickthecolumnbutton(Interface,Type,Username,IPAddress,…,etc.)tosortthecolumninascending/descendingorder.Selectthecheckboxesandclick‘Delete’todeleteaccounts.ClickDeleteALLtodeleteallaccountsincurrentuserlist.
WG‐500PHotspotinaPrinter95335 DHCPClientsTheDHCPclienttableshowsthecurrentDHCPusersontheLAN.Figure3‐3‐6CurrentUserScreen336 SessionListTheremotesiteadministratorcouldmonitortherealtimeusagestatusofWG‐500Pviathispage.Figure3‐3‐7SessionListScreen
WG‐34Thispass1. 2. 3. 4. 5. 6. 7. 8. 9. ‐500PHotspot4 SystemsallowsserswordandConfiguratFirmwareBootCodeControllerSystemAccSSLCertificPingCommRestartLogouttinaPrintermToolsrviceprovidbackuporrtionBoardFirmcountcatemandderoradmirestoreconfmwareFigure3‐96inistratortofiguration.‐4‐1SystemToprocessFoolsItemFirmwareuppgrade,chaange
WG‐500PHotspotinaPrinter97341 ConfigurationUsetheConfigurationitemtosave,restoreorresetconfigurationparametersoftheWG‐500P.Figure3‐4‐2ConfigurationSettingScreenItemDefaultDescriptionBackupClick it to save the system configuration to your computer. (export.cfg)Remote TFTP Server IP Address EmptyEnter the IP address of TFTP Server.File NameEmptyEnter the file name in the File Name field.RestoreClick it to restore your system configuration.Local PC File PathEmptyEnter the file pathname of the system configuration file in the Local PC File Path field. Remote TFTP Server IP Address EmptyEnter the IP address of TFTP Server. File NameEmptyEnter the file name in the File Name field.Reset the system back to factory defaults Erase all setting and back to factory setting.Keep subscriber profileDisableClick the keep subscriber profile to change all the parameters into factory setting but still reserve the subscriber profiles. 
WG‐500PHotspotinaPrinter98342 FirmwareUpgradeTheFirmwareUpgrademenuloadsupdatedfirmwaretobepermanentinflashROM.Thedownloadfileshouldbeabinaryfilefromfactory;otherwisetheagentwillnotacceptit.Afterdownloadingthenewfirmware,theagentwillautomaticallyrestartit.ManualFirmwareUpgradeFigure3‐4‐3ManualFirmwareUpgradeSettingScreenItemDefault DescriptionThis allow administrator to upgrade the firmware via HTTP.Local PC File PathEmptyEnter the file name and location in the Local PC File Path field. This allows administrator use TFTP server to upgrade firmware.Remote TFTP Server IP Address EmptyEnter the IP address of TFTP Server.File NameEmptyEnter the file name in the File Name field.Note:1. Beforedownloadingthenewfirmware,usersmustsavetheconfigurationfileforrestoreconfigurationparametersofthedevice.2. Donotturnthepoweroffduringtheupgradeprocess.Thiswilldamagetheunit.
WG‐500PHotspotinaPrinter99ScheduledFirmwareUpgradeScheduledFirmwareUpgradeisaprogramthatenablesanautomaticupgradetothelatestfirmwareversionthroughtheTFTPserver.Figure3‐4‐4ScheduledFirmwareUpgradeSettingScreenItemDefaultDescriptionDisable/EnableDisables or enables the scheduled firmware upgrade function.TFTP Server IPEmptyEnter the IP address of TFTP Server.File SynchronizationEmptyEnter the file name and location in the File Synchronization field.ViewSampleFileClick the button to display synchronization file example.Figure3‐4‐5SynchronizationFileSampleCodeFrequencyWeeklySet the firmware upgrade time. The default value is “Weekly”. Note:Donotturnthepoweroffduringtheupgradeprocess.Thiswilldamagetheunit.
WG‐500PHotspotinaPrinter100343 BootCodeFigure3‐4‐6BootCodeUpgradeSettingScreen344 ControllerBoardFirmwareFigure3‐4‐7ControllerBoardFirmwareUpgradeSettingScreen
WG‐500PHotspotinaPrinter101345 SystemAccountUsetheSystemAccountscreentochangethesystemaccounts.Figure3‐4‐8SystemAccountSettingScreen
WG‐500PHotspotinaPrinter102ItemDescriptionUsernameThe username can consist of up to 20 alphanumeric characters and is sensitive.PasswordThe password can consist of up to 20 alphanumeric characters and is sensitive.ConfirmThe password for confirmationSuper SubscriberDisables or enables the super account function.Idle Time OutThe user idle time out valid is 1 to 1440 minutes. If the idle time out is set as 5 minutes, it means if the account doesn’t send packet in 5 minutes, the account will logout automatically.AdministratorAccountStep1:StartyourWebbrowserandenterthefactorydefaultIPaddress10.59.1.1inyourbrowser’slocationbox.PressEnter.Figure3‐4‐9WebBrowserLocationField(FactoryDefault)Step2:TheWG‐500Pconfigurationmainmenuwillappear.EnteradminastheUsernameandadminasthepasswordandclickLogin.Ifyouarefirsttimesettingthesystem,thewizardsetupscreenwillappear.Figure3‐4‐10AdministratorAccountLoginScreen(FirstTime)
WG‐500PHotspotinaPrinter103Web‐BasedAccountingManagerStep1:StartyourWebbrowserandenterthefactorydefaultIPaddress10.59.1.1inyourbrowser’slocationbox.PressEnter.Figure3‐4‐11WebBrowserLocationField(FactoryDefault)Step2:TheWG‐500Pconfigurationmainmenuwillappear.EnteraccountastheUsernameandaccountasthepasswordandclickLogin.Figure3‐4‐12Web‐BasedAccountingManagerLoginScreenStep3:Afteravalidusernameandpasswordhavebeenprovided,theaccountGeneratorPanelhomepagewillappear.Figure3‐4‐13AccountGeneratorPanel
WG‐500PHotspotinaPrinter104SupervisorAccountStep1:StartyourWebbrowserandenterthefactorydefaultIPaddress10.59.1.1inyourbrowser’slocationbox.PressEnter.Figure3‐4‐14WebBrowserLocationField(FactoryDefault)Step2:TheWG‐500Pconfigurationmainmenuwillappear.EntersupervisorastheUsernameandsupervisorasthepasswordandclickLogin.Figure3‐4‐15SupervisorAccountLoginScreenStep3:Afteravalidusernameandpasswordhavebeenprovided,theWG‐500Pconfigurationhomepagewillappear.“WIZARDSETUP”and“ADVANCEDSETUP”aredisabled.
WG‐500PHotspotinaPrinter105SuperSubscriberAccountStartyourWebBrowser;asubscriberloginpagewillappear.EntersuperastheUsernameandsuperasthepasswordandclickEnter,youcanuseInternetnow.Figure3‐4‐16SubscriberLoginPage346 SSLCertificateThefunctionallowsyoutodownloadtheregisteredCAcertificateintotheWG‐500P.Figure3‐4‐17SSLCertificateDownloadSettingScreenNote:ThepasswordfieldmustthesameastheCA’sregisteredpassword.
WG‐500PHotspotinaPrinter106347 PingCommandThePingfunctioncanchecktheWG‐500Pnetworkingconnectiveornot.Figure3‐4‐18PingCommandScreenItemDescriptionIP or URLEnter the IP address or the URL link.348 RestartIfyourWG‐500Pisnotoperatingcorrectly,youcanchoosethisoptiontodisplaytherestartWG‐500Pscreen.ClickingtheapplybuttonrestarttheWG‐500P,withallofyoursettingsremainingintact.Figure3‐4‐19RestartScreen349 LogoutIfyouwouldliketoleavetheconfigurationpage,pleaseclickapplytoexit.Figure3‐4‐20LogoutScreen
WG‐500PHotspotinaPrinter1074 QRCodeService41 QRcodesettingPleasefindAdvancesetting>Customization>AccountPrintout>QRcode.Ifyoudon’tprintouttheQRCodeontheticket,pleasedisableitandclickApplybutton.Figure4‐1‐1QRCodingSettingScreenStep1Step2:EnableQRCodeStep3:ClickApply
WG‐500PHotspotinaPrinter10842 AdditionalinformationforQRcodeuseIfyouwillactivateQRcodeserviceforAppleiOS6deviceandlater,1. PleasefindAdvancesetting>Security>PassThrough.2. Choose“Enable”.3. Addwww.apple.comintoPASSTHROUGHlistinWG‐500PbecauseiOS6deviceandlaterisrequired.4. ClickAddtoListbutton.5. ChooseActiveonthePassThroughList.ForcertainQRcodeApps,pleaseaddgo.redirectingat.comandfollowtheabovesteps.Figure4‐2‐1PassThroughSettingScreenStep1Step2:ChooseEnableStep3:Add“www.appale.com”Step4:ClickAddtoListStep5:ChooseActive
WG‐500PHotspotinaPrinter10943 UseQRcodetoaccesstheInternetPleasefollowthestepstoaccesstheInternetforclients.1. PrintouttheTicket.YoucanfindtheESSIDandWPA/WPA2printedontheticket.Figure4‐3‐1QRCodingTicket2. ConnecttotheESSID(ex:Handlink_WG‐500P),inputWPA/WPA2password(ex:1234567890).Figure4‐3‐2PasswordInputScreenVerifytoconnectthecorrectESSIDInputtheWPA/WPA2password
WG‐500PHotspotinaPrinter1103. OpenupQRcodeAPPandScan.Figure4‐3‐3Scan1Screen4. SomeAppsmayrequireusertoclick"GotoURL".Figure4‐3‐4Scan2ScreenScanQRcodeClick“GotoURL”
WG‐500PHotspotinaPrinter1115. ClientcanusetheInternetnow.Figure4‐3‐5ScanFinishScreen
WG‐500PHotspotinaPrinter1125 PersonalIDRecognitionSomecountriesorareaswouldaskuserstoshowtheirpersonalidentificationwhenaccessingWiFiserviceaccordingtolawsforthecybercrimeinvestigation.WG‐500PprovidesthefunctionPersonalIdentificationRecognition.Thedefaultisdisabled.Subscribersneedtoactivateitbythefollowingsteps.
WG‐500PHotspotinaPrinter11351 PersonalIDRecognitionSettingStep1.Activethefunction:GotoAdvancedSetup‐>System‐>System.EnablethePersonalIDRecognitionMode.PleaserefertheChapter3‐2‐5‐1System.Figure5‐1‐1SystemSetting
WG‐500PHotspotinaPrinter114Step2.ThefirstbillingprofileyouactivateisthePersonalIDRecognitionselection.ThereisonlyONEbillingprofileinthePersonalIDRecognitionmode.PleaserefertheChapter3‐2‐2‐1Billingtomodifyyourfirstbillingprofile.Figure5‐1‐2BillingSettingScreenStep3:Startyourbrowser,andthenenterthefactorydefaultIPaddress10.59.1.1inyourbrowser’slocationbox.PressEnter.Figure5‐1‐3WebBrowserLocationField(FactoryDefault) 
WG‐500PHotspotinaPrinter115Step4:TheWG‐500Pconfigurationtoolsmenuwillappear.IntheUsernameandPasswordfield,typethefactorydefaultusername“account”andpassword“account”andclickLogin.Figure5‐1‐4ConfigurationToolsMenuStep5:ONLYaccountmanagercanoperatePIRandprintouttheticket.Thereare3typesfortheaccountmanagertochoose,includingDriverLicenseNO.,PassportNo.andIdentifycardNo.Fillinnumbersandclick“+”or“‐”forusagetime.ClickthePrintbuttontoprintouttheticket.ClickViewAccountListtoseeallaccountswhichareprintedout.Figure5‐1‐5PIR
WG‐500PHotspotinaPrinter116Figure5‐1‐6PIRTicketStep6:ClickLogoutandthenclicktheApplybuttontofinishit.Figure5‐1‐7Logout
WG‐500PHotspotinaPrinter117AppendixASignalConnectionArrangementsRJ‐45EthernetPort TheWG‐500PRJ‐45EthernetportcanconnecttoanynetworkingdevicesthatuseastandardLANinterface,suchasaHub/SwitchHuborRouter.Useunshieldedtwisted‐pair(UTP)orshieldtwisted‐pair(STP)cabletoconnectthenetworkingdevicetotheRJ‐45Ethernetport. Dependingonthetypeofconnection,10Mbpsor100Mbps,usethefollowingEthernetcable,asprescribed.10Mbps:UseEIA/TIA‐568‐100‐Category3,4or5cables.100Mbps:UseEIA/TIA‐568‐100‐Category5cable. Figure RJ-45 Connector and Cable Pins Note:Topreventlossofsignal,makesurethatthelengthofanytwisted‐pairconnectiondoesnotexceed100meters.
WG‐500PHotspotinaPrinter118AppendixBRegulations/EMICompliance FCCRegulatoryStatementPart15‐ClassBcompliantdeviceThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingconditions:1. Thisdevicemaynotcauseharmfulinterference,and2. Thisdevicemustacceptanyinterferencereceived,includingthatwhichmaycauseundesiredoperation.Thisequipmenthasbeentestandfoundtocomplywiththelimitsforacomputingdevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:1. Reorientorrelocatethereceivingantenna.2. Increasetheseparationbetweentheequipmentandreceiver.3. Theequipmentandthereceivershouldbeconnectedtheoutletsonseparatecircuits.4. Consultthedealeroranexperiencedradio/televisiontechnicianforhelp.Changesormodificationnotexpresslyapprovedbethepartyresponsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment.FCCRFRadiationExposureStatement1. ThisTransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.2. ThisequipmentcomplieswithFCCRFradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithaminimumdistanceof20centimetersbetweentheradiatorandyourbody.
WG‐500PHotspotinaPrinter119LIMITEDWARRANTYWG‐500PWhatthewarrantycovers:Wewarrantitsproductstobefreefromdefectsinmaterialandworkmanshipduringthewarrantyperiod.Ifaproductprovestobedefectiveinmaterialorworkmanshipduringthewarrantyperiod,wewillatitssoleoptionrepairorreplacetheproductwithalikeproductwithalikeproduct.Replacementproductorpartsmayincluderemanufacturedorrefurbishedpartsorcomponents.Howlongthewarrantyiseffective:TheWG‐500Piswarrantedforoneyearforallpartsandoneyearforalllaborfromthedateofthefirstconsumerpurchase.Whothewarrantyprotects:Thiswarrantyisvalidonlyforthefirstconsumerpurchaser.Whatthewarrantydoesnotcover:1. Anyproduct,onwhichtheserialnumberhasbeendefaced,modifiedorremoved.2. Damage,deteriorationormalfunctionresultingfrom:a. Accident,misuse,neglect,fire,water,lightning,orotheractsofnature,unauthorizedproductmodification,orfailuretofollowinstructionssuppliedwiththeproduct.b. Repairorattemptedrepairbyanyonenotauthorizedbyus.c. Anydamageoftheproductduetoshipment.d. Removalorinstallationoftheproduct.e. Causesexternaltotheproduct,suchaselectricpowerfluctuationsorfailure.f. Useofsuppliesorpartsnotmeetingourspecifications.g. Normalwearsandtears.h. Anyothercausethatdoesnotrelatetoaproductdefect.3. Removal,installation,andset‐upservicecharges.Howtogetservice:1. Forinformationaboutreceivingserviceunderwarranty,contactourCustomerSupport.2. Toobtainwarrantedservice,youwillberequiredtoprovide(a)theoriginaldatedsalesslip,(b)yourname,(c)youraddress(d)adescriptionoftheproblemand(e)theserialnumberoftheproduct.3. Takeorshiptheproductprepaidintheoriginalcontainertoyourdealer,andourservicecenter.4. Foradditionalinformation,contactyourdealerorourCustomerServiceCenter.Limitationofimpliedwarranties:THEREARENOWARRANTIED,EXPRESSEDORIMPLIED,WHICHEXTENDBEYONDTHEDESCRIPTIONCONTAINEDHEREININCLUDINGTHEIMPLIEDWARRANTYOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE.Exclusionofdamages:
WG‐500PHotspotinaPrinter120OurLIABILITYISLIMITEDTOTHECOSTOFREPAIRORREPLACEMENTOFTHEPRODUCT.WeSHALLNOTBELIABLEFOR:1. DAMAGETOOTHERPROPERTYCAUSEDBYANYDEFECTSINTHEPRODUCT,DAMAGESBASEDUPONINCONVENCE,LOSSOFUSEOFTHEPRODUCT,LOSSOFTIME,LOSSOFPROFITS,LOSSOFBUSINESSOPPORTUNITY,LOSSOFGOODWILL,INTERFERENCEWITHBUSINESSRELATIONSHIPS,OROTHERCOMMERCIALLOSS,EVENIFADVISEDOFTHEPOSSIBLITYOFSUCHDAMAGES.2. ANYOTHERDAMAGES,WHETHERINCIDENTAL,CONSEQUENTIALOROTHERWISE.3. ANYCLAIMAGAINSTTHECUSOMERBYANYOTHERPARTY.

Navigation menu