Hangzhou Hikvision Digital Technology D0211504 Dual-tech Detector User Manual RINS1691 3 KX15DTAM A3 EXPORT 040716
Hangzhou Hikvision Digital Technology Co., Ltd. Dual-tech Detector RINS1691 3 KX15DTAM A3 EXPORT 040716
User Manual
DS-PD2-D15AME START 15m DualͲƚĞĐŚ Detector Diagram references detect when both PIR and Microwave technologies are Masked. The detector is sensors. The Mask is adjustable between 0 to 1M. /ĨƚŚĞDĂƐŬŝŶŐĂƌĞĂŝƐĞŶƚĞƌĞĚƚŚĞůƵĞ>ƐƚĂƌƚƐŇĂƐŚŝŶŐƚŽƐŚŽǁƚŚĂƚƚŚĞ MASK and ALARM relay will open and the Green and Orange LEDs will be and a walk test must be done. Blocking: 15m when the panel is disarmed. When blocking is detected the alarm relay MASK/ALARM EOL LINK blocking, the DS-PD2-D15AME must be walk tested so that the PIR and MW sensors NOTE: remains at 15m. GENERAL WIRING 85° 74zones 7planes,Curtain 15m/18m/30m 1.8-2.4m yes 3EOL yes yes yes yes yes yes yes yes yes n/a N/C DEOL A A T T EOL INPUT 1 COM A A T T EOL INPUT 1 COM A A T T EOL INPUT 1 COM HIK -10°C / +40°C 125g 117 x 69 x 55 mm GENERIC CONTROL PANEL Z1 COM Z2 Z3 Z1 COM Z2 Z3 CE 2 years Max: 1M 30% Mask ч1m OFF >1m wholly, byregarding any means, or implied, to thewithout Manual. the About this Manual This manual is applicable to video security control panel. Please use this user manual under the guidance of professionals. Trademarks Acknowledgement website For electrical products sold within the European Community. At the end of the electrical Please uselife, thisituser manual under the guidance of professionals. products should not be disposed of with household waste. Please recycle where Trademarks Acknowledgement country. This product operates in a European non-harmonised frequency band. Hereby This product and - if applicable - the supplied accessories too are marked with "CE" at www.pyronix.com/product-compliance.php and comply therefore with the applicable harmonized European standards listed 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K About this Manual This manual is applicable to detector. 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 30% 1M MAX yes yes yes 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 10.515, 10.525, 10.535GHz 2.5 second 0.3 - 3m/s 6500 Lux Sealed 3D User Manual COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd. Co., Ltd. ALL RIGHTS RESERVED. ALL RIGHTS RESERVED. Commercial and Light Industrial Environment. GENERAL HIK CONTROL PANEL 9-16 DC (12DC nominal) 23mA 30mA Solid state 60DC, 50mA protec on 12DC max, 50mA max 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K Coverage Maximum range Op mal installa on height Creep-zone protec on Key features Adjustable an -masking (an -spray) An blocking technology Blue Wave Technology Automa c sensi vity Digital temperature compensa on Separate indica on: microwave, PIR and alarm 3 microwave frequencies to avoid interference DEOL resistors on board Tamper protec on included Signal Strength Indicators (SSI) Wired Power supply Current consump on at rest Current consump on in alarm Relay type Output relay Tamper terminal Electrical speciĮca ons Microwave frequency Alarm response Detec on speed Direct light Įlter Op cs Geometric lens conĮgura on Other details Opera ng temperature Weight Dimensions Accessories Wall/ceiling brackets included Long range and curtain lenses included Bracket back tamper kit included Cer Įca ons and warranty Electrical conformity Warranty The Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source according to the IEC60950-1 standard. Please refer to technical specifications for detailed information. 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K Blocking Enabled/Disabled: To enable the feature, switch 6 must be OFF and the RI input should be connected to an output on the control panel which gives 0V when DISARMED and removes 0V when ARMED. DS-PD2-D15AME is supplied with the following: BRACKETW (Wall Bracket), BRACKETC (Ceiling Bracket) and TAMPER (Back tamper) A A T T EOL INPUT 1 COM PGM NC C NO 15m Volumetric Lens Horizontal Coverage 85° 60 zones 7 planes 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K Control Panel Programming 18m Curtain Lens For INCERT compliance, set pulse count to 1 (see switch 4 diagram) 30m Long Range Lens For INCERT compliance, set pulse count to 1 (see switch 4 diagram) Horizontal Coverage Horizontal Coverage at Minimum Range PULSE COUNT 1 Horizontal Coverage at Maximum Range 0.25 - 2.5m/s AND 0.25 - 2.5m/s OR TAMPER TAMPER 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. MASK/A LARM EOL LINK FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedC and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. 3 3EOL 2 DEOL 3 3EOL 2 DEOL PCX 162i Z1 COM PCX 162i Z1 COM PIR Activated Powering up PIR ALARM MICROWAVE Microwave Activated PIR Failed Self Test Alarm Microwave Failed Self Test Mask Processing Masked/ Blocked Low Voltage Hard Wired Resistor (Generic) Hard Wired Resistor (Generic) Z1 COM Z1 COM 8k2 HORIZONTAL COVERAGE 12m 85O 60 zones 7 planes RLNS074 INCERT ONLY 12m Volumetric Lens 6k8 6m 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 3K 15K 12K 8K2 6K8 5K6 4K7 2K2 1K 6K8 5K6 4K7 2K2 1K 5K6 4K7 2K2 1K 6m 12m VERTICAL COVERAGE 1.8-2M 6m 12m
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : baclks150 Create Date : 2018:07:26 14:28:12+08:00 Modify Date : 2018:08:14 15:29:55-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2018:08:14 15:29:55-07:00 Creator Tool : Adobe Illustrator CC 2015.3 (Windows) Format : application/pdf Title : RINS1691-3 KX15DTAM A3 EXPORT 040716 Creator : baclks150 Document ID : uuid:d0e1eb7d-cd7f-451f-a81b-4580e30074bf Instance ID : uuid:ed7062a8-c170-48d5-8ddd-7c8811ecb2e6 Producer : Acrobat Distiller 11.0 (Windows) Page Count : 3 For : Yee Jiang, Bounding Box : 0 0 1219 871 Container Version : 11 Creator Version : 16 Image Height : 871 Image Width : 1219 Image Size : 1219x871 Megapixels : 1.1EXIF Metadata provided by EXIF.tools