Hangzhou Hikvision Digital Technology D0701208 Wireless Panic Button User Manual RINS1885 2 HUD WE ENGINEER

Hangzhou Hikvision Digital Technology Co., Ltd. Wireless Panic Button RINS1885 2 HUD WE ENGINEER

User Manual

DS-PD1-EB-WS2Wireless Panic BuonLEDs : General LEDs(i) From power up: Not learntAppearance DescriponRegister Panic Buon Locally Register Panic Buon Locally via APP(ii) Learning process(iii) 8 x Flashes: Learnt(iv) 18 x Slow flashes: Fault with new baery installed(v) Signal strength sent to control panel(vi) Hold up alarm has been acvated(vii) Control panel has not received the signal from HUDDiagram References:ENGLI S HSpecificaonBaery InformaonThe baery supplied has been chosen to provide long service life whilst, for safety reasons, having limited output current.When disposing of the product, the baery must be removed and disposed of separately in accordance with the local regulaons..(iv) 18 x Slow flashes: Fault with new baery installed(iii) 8 x flashes: Learnt(i) From power up: Not learnt(ii) Learning process(vii) Control panel has not received the signal from HUD(vi) Panic alarm has been triggeredAABCLEDs - General LEDsDBCDCThis product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Direcve 2014/53/EU, the EMC Direcve 2014/30/EU, the LVD Direcve 2014/35/EU, the RoHS Direcve 2011/65/EU.Learn Panic Button via APP1Log in to the APP Store and input “Hik-Connect” to search the mobile client.56Log in the Hik-Connect and ap the icon “+” at the upper-right coner of the Hik-Connect page to add the security control panel. You can scan the QR code on the device rear panel or on the package box, or input the device serial No. manually to add the device when the device is in the registraon mode.Aer adding the security control panel, tap the arming status icon on the right of the security control panel’s name to enter the Paron page.Learn Panic Button onto Control PanelAppearanceWith in 50cmPanic BuonIndicator Panic Buon2Download and install Hik-Connect to your phone.3Aer installing, tap to run the client.4Power on the security control panel.7Tap the “+” icon on the Paron page to add the peripherals. Register DetectorControl Panel1. Make the security control panel enter the registraon mode.2. Register the panic buon: Hold any one of the buons unl the two LEDs flash alternately. The green LED will flash 8 mes if the registraon is finished.3. Communicaon Test: press the buon to trigger the alarm .Note: The distance between the security control panel and the detector should be less than 50 cm. Unregister DetectorInialize the Detector1. Remove the baery to power the panic buon off.2. Hold any of the buons and reinstall the baery to power the detector on at the same me. Release the buon while the two LEDs flash once together. When the inializaon is completed, the indicator turns to alternately flashing red and green.Please register the device winthin 90 seconds after it being powered on.Hold-up funconYesLED indicaonRed, Amber, Green Operang temperature -10°C to +40°CDimensions (H x W x D) 72 x 30 x 20 mmTransmission frequency Range in open space 300m Baery type CR1/3NBaery voltage 3VThreshold 2.1V +/- 5% Electrical conformity CEWarranty 2 yearsSeng devices technical characteriscs Environmental and operang featuresElectrical & baeryCerficaons and warranty433.6MHZ
Product InformaonUser ManualCOPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd.ALL RIGHTS RESERVED.Any and all informaon, including, among others, wordings, pictures, graphs are the properes of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer referred to be “Hikvision”). This user manual (hereinaer referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, parally or wholly, by any means, without the prior wrien permission of Hikvision. Unless otherwise spulated, Hikvision does not make any warranes, guarantees or representaons, express or implied, regarding to the Manual.About this ManualThis manual is applicable to Panic Buton.The Manual includes instrucons for using and managing the product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is subject to change, without noce, due to firmware updates or other reasons. Please find the latest version in the company website(hp://overseas.hikvision.com/en/).Please use this user manual under the guidance of professionals.Trademarks Acknowledgement and other Hikvision’s trademarks and logos are the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned below are the properes of their respecve owners.FCC InformaonFCC InformaonPlease take aenon that changes or modificaon not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in aresidenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separaon between the equipment and receiver. —Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help.FCC CondionsThis device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operaon

Navigation menu