Hangzhou Hikvision Digital Technology D0701208 Wireless Panic Button User Manual RINS1885 2 HUD WE ENGINEER
Hangzhou Hikvision Digital Technology Co., Ltd. Wireless Panic Button RINS1885 2 HUD WE ENGINEER
User Manual
DS-PD1-EB-WS2 A Appearance Wireless Panic Button This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Directive 2014/53/EU, the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU. Indicator Panic Button Panic Button ENGLISH Diagram References: Appearance Description Register Panic Button Locally Register Panic Button Locally via APP LEDs : General LEDs (i) From power up: Not learnt (ii) Learning process (iii) 8 x Flashes: Learnt (iv) 18 x Slow flashes: Fault with new battery installed (v) Signal strength sent to control panel (vi) Hold up alarm has been activated (vii) Control panel has not received the signal from HUD Please register the device winthin 90 seconds after it being powered on. Learn Panic Button onto Control Panel With in 50cm Control Panel Specification Setting devices technical characteristics Hold-up function Yes LED indication Red, Amber, Green Learn Panic Button via APP 1 Log in to the APP Store and input “Hik-Connect” 2 Download and install Hik-Connect to your phone. to run the client. 4 Power on the security control panel. 1. Make the security control panel enter the registration mode. 2. Register the panic button: Hold any one of the buttons until the two LEDs flash alternately. The green LED will flash 8 times if the registration is finished. 3. Communication Test: press the button to trigger the alarm . Note: The distance between the security control panel and the detector should be less than 50 cm. Environmental and operating features Operating temperature -10°C to +40°C Dimensions (H x W x D) 72 x 30 x 20 mm Electrical & battery 433.6MHZ Transmission frequency Range in open space 300m Battery type CR1/3N Battery voltage 3V 2.1V +/- 5% Threshold Certifications and warranty Electrical conformity CE Warranty 2 years (i) From power up: Not learnt to search the mobile client. 3 After installing, tap Register Detector D LEDs - General LEDs (ii) Learning process (iii) 8 x flashes: Learnt 5 Log in the Hik-Connect and ap the icon “+” at the upper-right coner of the Hik-Connect page to add the security control panel. You can scan the QR code on the device rear panel or on the package box, or input the device serial No. manually to add the device when the device is in (iv) 18 x Slow flashes: Fault with new battery installed (vi) Panic alarm has been triggered the registration mode. Unregister Detector Initialize the Detector Battery Information The battery supplied has been chosen to provide long service life whilst, for safety reasons, having limited output current. When disposing of the product, the battery must be removed and disposed of separately in accordance with the local regulations. 1. Remove the battery to power the panic button off. 2. Hold any of the buttons and reinstall the battery to power the detector on at the same time. Release the button while the two LEDs flash once together. When the initialization is completed, the indicator turns to alternately flashing red and green. 6 After adding the security control panel, tap the arming status icon on the right of the security control panel’s name to enter the Partition page. 7 Tap the “+” icon on the Partition page to add the peripherals. (vii) Control panel has not received the signal from HUD Product Information User Manual COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This manual is applicable to Panic Buton. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website (http://overseas.hikvision.com/en/). Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. FCC Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:12:07 10:25:01+01:00 Creator : Adobe Illustrator CC 2017 (Windows) Modify Date : 2018:06:25 16:00:57-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : RINS1885-2 HUD-WE ENGINEER Metadata Date : 2018:06:25 16:00:57-07:00 Creator Tool : Adobe Illustrator CC 2017 (Windows) Thumbnail Width : 180 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16293 bytes, use -b option to extract) Instance ID : uuid:60c95d7e-ce5f-4bb3-ade6-86a9b0453e37 Document ID : xmp.did:f5f7fbfa-c2ca-7146-86e0-4179b96cb513 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:b0bc4430-cf09-4b95-b397-59a6c4123f2c Derived From Document ID : xmp.did:08760a9f-3d72-cb4b-8fc5-4f9b5ec2a995 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:86BC32B4D2F1E1119829FC510D63AD1A, xmp.iid:f5f7fbfa-c2ca-7146-86e0-4179b96cb513 History When : 2012:08:29 13:41:38+01:00, 2016:12:07 10:24:58Z History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CC 2017 (Windows) History Changed : /, / Ingredients File Path : C:\Users\MillsD\AppData\Roaming\Adobe\Creative Cloud Libraries\LIBS\E96F30255114C6630A490D44_AdobeID\creative_cloud\dcx\f6023808-a7d1-4fa0-a049-d0664b7ae71c\components\ffb4b165-bd42-419e-a4f8-35fbaaf03c2c.ai, C:\Users\MillsD\AppData\Roaming\Adobe\Creative Cloud Libraries\LIBS\E96F30255114C6630A490D44_AdobeID\creative_cloud\dcx\f6023808-a7d1-4fa0-a049-d0664b7ae71c\components\ffb4b165-bd42-419e-a4f8-35fbaaf03c2c.ai, C:\Users\MillsD\AppData\Roaming\Adobe\Creative Cloud Libraries\LIBS\E96F30255114C6630A490D44_AdobeID\creative_cloud\dcx\f6023808-a7d1-4fa0-a049-d0664b7ae71c\components\ffb4b165-bd42-419e-a4f8-35fbaaf03c2c.ai, C:\Users\MillsD\AppData\Roaming\Adobe\Creative Cloud Libraries\LIBS\E96F30255114C6630A490D44_AdobeID\creative_cloud\dcx\f6023808-a7d1-4fa0-a049-d0664b7ae71c\components\ffb4b165-bd42-419e-a4f8-35fbaaf03c2c.ai Ingredients Document ID : xmp.did:1b6690ed-28a8-c141-9479-b6a9cf6be651, xmp.did:1b6690ed-28a8-c141-9479-b6a9cf6be651, xmp.did:1b6690ed-28a8-c141-9479-b6a9cf6be651, xmp.did:1b6690ed-28a8-c141-9479-b6a9cf6be651 Ingredients Instance ID : uuid:2077d883-6091-4c08-8417-a34ea08059de, uuid:2077d883-6091-4c08-8417-a34ea08059de, uuid:2077d883-6091-4c08-8417-a34ea08059de, uuid:2077d883-6091-4c08-8417-a34ea08059de Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : False N Pages : 1 Max Page Size W : 307.000038 Max Page Size H : 220.000008 Max Page Size Unit : Millimeters Font Name : TrebuchetMS, Myriad-Roman, Calibri-Light, Calibri, Calibri-Bold, Calibri-BoldItalic, MicrosoftYaHei, MicrosoftYaHei-Bold Font Family : Trebuchet MS, Myriad, Calibri, Calibri, Calibri, Calibri, 微软雅黑, 微软雅黑 Font Face : Regular, Roman, Light, Regular, Bold, Bold Italic, Regular, Bold Font Type : Open Type, Type 1, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.00, 001.001, Version 2.10, Version 5.74, Version 5.74, Version 5.74, Version 6.02, Version 6.02 Font Composite : False, False, False, False, False, False, False, False Font File Name : trebuc.ttf, wmr_____.pfb; wmr_____.pfm, calibril.ttf, calibri.ttf, calibrib.ttf, calibriz.ttf, msyh.ttf, msyhbd.ttf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Red 032 C, PANTONE Black C, PANTONE 354 C, Hik Grey Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : Hik Grey, PANTONE 354 C, PANTONE Black C, PANTONE Red 032 C Swatch Colorant Type : SPOT, SPOT, SPOT, SPOT Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : CMYK, Lab, Lab, Lab Swatch Colorant Cyan : 0.000000 Swatch Colorant Magenta : 0.000000 Swatch Colorant Yellow : 0.000000 Swatch Colorant Black : 69.999999 Swatch Colorant L : 60.392197, 17.254900, 55.294098 Swatch Colorant A : -77, 1, 72 Swatch Colorant B : 40, 3, 43 Producer : Adobe PDF library 15.00 Page Count : 2 For : Yee Jiang, Bounding Box : 0 -643 874 624 Container Version : 11 Creator Version : 16EXIF Metadata provided by EXIF.tools