Hangzhou Hikvision Digital Technology I002U40 Network Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3282620
Application ID	v8YgxXEyfDKM6UrA8TE2Sw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	373.52kB (4668939 bits)
Date Submitted	2017-02-14 00:00:00
Date Available	2017-02-14 00:00:00
Creation Date	2016-12-08 12:50:19
Producing Software	Adobe PDF library 10.01
Document Lastmod	2016-12-08 12:50:20
Document Title	Baseline_Quick Start Guide of Cube Camera_U4_20161127_复制
Document Creator	Adobe Illustrator CS6 (Windows)

*使用产品前请仔细阅读快速操作指南，并妥善保管
Network Cube Camera
Quick Start Guide
UD
Quick Start Guide
COPYRIGHT ©2016 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties
of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images
and all other information hereinafter are for description and explanation only. The
information contained in the Manual is subject to change, without notice, due to firmware
updates or other reasons. Please find the latest version in the company website
(http://overseas.hikvision.com/en/).
Visit the company website (http://overseas.hikvision.com/en/) to get the manuals, client
software, and developing tools.
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgment
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE
CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU, Radio
Equipment Directive 2014/53/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain
de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur
et votre corps.
Safety Instruction
These instructions are intended to ensure that a user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings: Follow these
safeguards to prevent serious
injury or death.
Cautions: Follow these
precautions to prevent potential
injury or material damage.
Warnings
● Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
● In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.
● Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
● Please make sure that the plug is firmly connected to the power socket. When the product
is mounted on wall or ceiling, the device shall be firmly fixed.
● If smoke, odor, or noise rise from the device, turn off the power at once and unplug the
power cable, and contact the service center.
Appearance
Installation
memory card (optional).
1 InstallUnscrew
the cover to expose the memory
Status
Indicator
IR Light
Lens
MIC
Speaker
Power
Interface
card slot.
2 Insert the memory card.
(Optional) to unmount the memory card, push
to get it ejected.
3 Screw the cover back.
RESET/WPS
Memory Card Slot
2 Drill three screw holes according to the
template.
3 Pry the bracket open at the “OPEN” sign.
Remove the trim ring.
Trim Ring
Cautions
● Make sure the power supply voltage is correct before using the camera.
● Do not drop the camera or subject it to physical shock.
● Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a
bit of ethanol and wipe it gently. If the camera will not be used for an extended period,
replace the lens cap to protect the sensor from dirt.
● Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur
(which is not a malfunction), and affect the sensor’s endurance at the same time.
● The sensor may be burned out by a laser beam, so when any laser equipment is in use,
make sure that the surface of sensor will not be exposed to the laser beam.
● Do not place the camera in extremely hot, cold (the operating temperature shall be -10°C to
+50°C), dusty, or damp locations, and do not expose it to high electromagnetic radiation.
● To avoid heat accumulation, ensure that there is good ventilation to the device.
● Keep the camera away from liquids.
● While in delivery, pack the camera in its original, or equivalent, packing, packing materials.
Or packing of the same texture.
● Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be
replaced regularly according to their average endurance. The average time varies because of
differences between operating environments and usage history, so regular checking is
recommended for all users. Please contact your dealer for more details.
● Improper use or replacement of the battery may result in hazard of explosion. Replace with
the same or equivalent type only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.
● If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
Bracket
Name
Description
Power
Input
For the power supply, (12V
). Plug the
power cable into the power input interface to
power on the camera.
Auto light source for night vision. The light is
behind the anti-reflection panel. You can see the
light when it is on.
. Steady red: The camera is starting up.
. Flashing blue: The camera is on and ready for
the Wi-Fi connection.
. Steady blue: The camera is running properly.
. Flashing red: Network exception.
IR Light
LED
Indicator
Name
Memory
Card Slot
4 Align the screw holes on mounting surface
Description
For microSD card. If a memory card is used,
video files will be stored in the memory card.
You would need to initialize it via the
Hik-Connect app/web browser/client software.
RESET/WPS WPS: Set Wi-Fi connection via WPS (Wi-Fi
Protected Setup) function.
RESET: Hold down the button for 10 seconds
when the camera is starting up or rebooting.
13
with those on the bracket. Fix the bracket with
three screws.
2 InstallPastethethecamera.
mounting template onto the
installation surface.
Setting the Network Camera over the LAN
Install the trim ring back.
Screw the camera body to the bracket. Tighten
the nut.
Step 1
Wiring
Connect the camera to the network according to the following
figures. You can connect the camera directly to a computer, or
connect i t via a router or switch.
Nut
or
Network Cable
Network Camera
半球
Computer
Adjust the surveillance angle.
or
1 Loosen the adjusting screw on bracket.
2 Hold the camera body to adjust the panning
and tilting position.
3 Tighten the adjusting screw after adjustment.
360°
30°
90°
Adjusting Screw
or
tw
Ne
Ne
le
ab
kC
网络交换机
two
Accessing via Web Browser
activate the camera via SADP software and search the IP addrss.
- Create a password and input the password into the password
field.
STRONG PASSWORD RECOMMENDED– We highly recommend
you create a strong password of your own choosing (using a
minimum of 8 characters, including upper case letters, lower
case letters, numbers, and special characters) in order to
increase the security of your product. And we recommend you
reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better
protect your product.
- Confirm the password.
- Click OK to save the password and enter the live view interface.
- Create a password and input the password into the password
field.
STRONG PASSWORD RECOMMENDED– We highly recommend
you create a strong password of your own choosing (using a
minimum of 8 characters, including upper case letters, lower
case letters, numbers, and special characters) in order to
increase the security of your product. And we recommend you
reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better
protect your product.
- Click OK to save the password.
rk C
able
Step 3
Modifying the IP Address
To view and configure the camera via LAN (Local Area Network),
you need to connect the network camera in the same subnet
with your PC. You can use SADP to change the IP address of the
camera.
Note: you can also use client software to modify IP address. Refer
to the user manual of client software for detailed information.
- Run the SADP software.
- Select the device. If the device is inactive, activate it first.
- Change the device IP address to the same subnet with your
computer by either modifying the IP address manually or
checking the checkbox of Enable DHCP.
- Input the password to take effect the IP address modification.
or
Network Camera
半球
System Requirement
Operating System: Microsoft Windows XP SP1 and above version
CPU: 2.0 GHz or higher
RAM: 1G or higher
Display: 1024×768 resolution or higher
Web Browser: Internet Explorer 8.0 and above version, Apple
Safari 5.0.2 and above version, Mozilla Firefox 5.0 and above
version and Google Chrome 18 and above version
- Open the web browser.
- In the browser address bar, input the IP address of the network
camera (the modified IP address), and press the Enter key to
enter the login interface.
- Input the user name and password. Click Login.
Note: The device IP address gets locked if the admin user
performs 7 failed password attempts (5 attempts for the
user/operator).
Computer
Step 2
Activate the Camera via SADP
Activate the Camera via Web Browser
- Input the IP address into the address bar of the web browser,
and click Enter to enter the activation interface.
Note:
The default IP address of the camera is 192.168.1.64.
For the camera enables the DHCP by default, you need to
10
- Get the SADP software from the supplied disk or the official
website, and install the SADP according to the prompts.
- Run the SADP software to search the online devices.
- Check the device status from the device list, and select the
inactive device.
11
- Install the plug-in.
Note: You may have to close the web browser to finish the
installation of the plug-in.
- Reopen the web browser after the installation of the plug-in and
repeat the steps to login.
12
13
14
Operating via Hik-Connect App
Step 3
Step 1
Hik-Connect Setup
Live View
- Download and install the Hik-Connect app by searching the
“Hik-Connect” in App Store or Google PlayTM.
- Launch the app and register for a Hik-Connect user account.
- Log in Hik-Connect app after registration.
Launch the Hik-Connect app and you can get the live view of the
connected devices.
Step 2
- Check the memory card status by tapping on the Storage Status
in the Device Settings interface.
- If the memory card status displays as Uninitialized, tap to
initialize it. The status will then change to Normal. You can then
start recording any event triggered video in the camera such as
motion detection.
Adding Device to Hik-Connect
- Use a network cable to connect the device with a router if the
device does not support Wi-Fi.
Note: After the device connects to the network, please wait one
minute before any operation on the device using Hik-Connect
app.
- In the Hik-Connect app, tap “+” on the upper-right corner and
then scan the QR code of the device to add the device. You can
find the QR code on the mounting base of the device or on the
cover of the Quick Start Guide of the device in the device
package.
- Follow the prompts to set the network connection and add the
device to your Hik-Connect account.
Recording
Playback
Launch the Hik-Connect app, tap a connected device and tap
Gallery button to play back.
Alarm Notification
Launch the Hik-Connect app and tap Message to see the alarm
messages.
0504151061208
15
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Format                          : application/pdf
Title                           : Baseline_Quick Start Guide of  Cube Camera_U4_20161127_复制
Metadata Date                   : 2016:12:08 12:50:20+08:00
Modify Date                     : 2016:12:08 12:50:20+08:00
Create Date                     : 2016:12:08 12:50:19+09:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 108
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 11391 bytes, use -b option to extract)
Instance ID                     : uuid:f2518295-f21a-4c70-b348-8dcd81f9e890
Document ID                     : xmp.did:FBB401F0F6BCE611B30EB160032B90EC
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:57d54c96-82ea-4869-a2ec-ccb116591cfd
Derived From Document ID        : xmp.did:A482710713D9E51199D3BE3F9A94F62A
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:2097C34B5245E4119831EDDC8EB40D57, xmp.iid:FBB401F0F6BCE611B30EB160032B90EC
History When                    : 2014:09:26 15:54:08+08:00, 2016:12:08 12:50:11+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : C:\Users\fenglinzhu\Desktop\3-3.png, C:\Users\fenglinzhu\Desktop\IP Modification.png, C:\Users\fenglinzhu\Desktop\sadp无标题.png, C:\Users\fenglinzhu\Desktop\3-3.png, C:\Users\fenglinzhu\Desktop\2016\U4\U4\U4\UD02270B_Baseline_Quick Start Guide of Mini Cube Camera_U1_V5.4.15_20160712\DC K80.png, C:\Users\fenglinzhu\Desktop\2016\U4\U4\U4\UD02270B_Baseline_Quick Start Guide of Mini Cube Camera_U1_V5.4.15_20160712\caution.jpg, C:\Users\fenglinzhu\Desktop\2016\U4\U4\U4\UD02270B_Baseline_Quick Start Guide of Mini Cube Camera_U1_V5.4.15_20160712\warning.jpg, C:\Users\fenglinzhu\Desktop\2016\U4\U4\U4\UD02270B_Baseline_Quick Start Guide of Mini Cube Camera_U1_V5.4.15_20160712\caution.jpg, C:\Users\fenglinzhu\Desktop\2016\U4\U4\U4\UD02270B_Baseline_Quick Start Guide of Mini Cube Camera_U1_V5.4.15_20160712\warning.jpg, D:\04_基线说明书&光盘\1401\制作素材\中间图标-1.png, D:\04_基线说明书&光盘\1401\制作素材\LOGO.png, C:\Users\fenglinzhu\Desktop\2016\U4\U4\U4\UD02270B_Baseline_Quick Start Guide of Mini Cube Camera_U1_V5.4.15_20160712\hikvision.jpg
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 540.021818
Max Page Size H                 : 94.999886
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Calibri-Light, Calibri, Calibri-Bold, TimesNewRomanPSMT, SimHei, FZLTXHJW--GB1-0
Font Family                     : Arial, Arial, Calibri, Calibri, Calibri, Times New Roman, 黑体, FZLTXHJW -GB1-0-GBpc-EUC-H
Font Face                       : Regular, Bold, Light, Regular, Bold, Regular, Regular, -GB1-0-GBpc-EUC-H
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown
Font Version                    : Version 5.22, Version 5.22, Version 2.10, Version 5.74, Version 5.74, Version 5.22, Version 5.01, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : arial.ttf, arialbd.ttf, calibril.ttf, CALIBRI.TTF, CALIBRIB.TTF, times.ttf, simhei.ttf, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 颜色组 1
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=15 M=0 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 14.999998
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 0.000000
Producer                        : Adobe PDF library 10.01
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : ������,
Bounding Box                    : 123 -2185 1690 -1541
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools