Hansong KMCSTADIUM Airplay Speaker User Manual Visio Stadium UI Spec R5 vsd
Hansong(Nanjing) Technology Ltd. Airplay Speaker Visio Stadium UI Spec R5 vsd
Hansong >
Contents
- 1. User Manual Safety Instructions
- 2. User Manual Operation
User Manual Operation
Stadium “On/Stby” Button Operation SOURCE VOL DN VOL UP ON/STBY AC connected (1) WIRELESS Wireless Audio Stream 60 min Timer (7) Button Press (2,3) = Green LED Sleep = Red LED 3 sec Button Press (5) 3 sec Button Press (5) Button Press (6) On Standby = LED off Notes: 1. 2. 3. 4. 5. 6. 7. 8. Default (AC connected) is On. On/Standby LED is green. From On mode, press “On/Stby” button to enter Sleep mode. From Sleep mode, press “On/Stby” button to enter On mode. From Sleep mode, start WiFi stream to enter On mode. From On or Sleep mode, press “On/Stby” button for 3 seconds to enter Standby mode. From Standby mode, press “On/Stby” button to enter On mode. From On mode, if no music plays for 60 minutes, enter Sleep mode. When exiting Sleep or Standby mode, remember last used input. 9. In On mode, Power LED = Green, Wireless LED is on, WiFi radio is on. 10. In Sleep mode, Power LED = Red, Wireless LED is on, WiFi radio is on, Amplifier is in standby (no hiss). If Bluetooth was the last used Wireless input, then Bluetooth radio is on. 11. In Standby mode, Power LED = off, Wireless LED is off, WiFi radio is off, Amplifier is off, main power supply is off. Stadium “Wireless” Button Operation and Wireless Setup = Initialization = Searching = Searching = Searching = Searching = Initialization Off = Updating = Update Complete = Searching = Connected = Searching LED is ORANGE for Wi-Fi Network mode. Bluetooth radio is OFF. LED is PURPLE (ORANGE & BLUE) for Wi-Fi Direct mode. Bluetooth radio is OFF. LED is BLUE for Bluetooth mode. Wi-Fi radio remains on, per Apple Spec. 10 min. Connection Made LED flashes rapidly (4Hz) during BridgeCo initialization and during Bluetooth pairing. LED flashes slowly (1Hz) when searching/waiting for Network Wi-Fi, Direct Wi-Fi, or Bluetooth connection. LED is on (no flashing) when connection is made to Network Wi-Fi, Direct Wi-Fi, or a Bluetooth device is connected. If no connection is made for 10 minutes, Wireless LED turns OFF. Wireless LED off Press Wireless Button Default (AC connected) is Wi-Fi Network mode. Hold “Wireless” button 3 seconds to enter Wi-Fi Direct mode. Hold “Wireless” button 3 seconds to return to Wi-Fi Network mode. Press “Wireless” button (<3 sec.) to enter Bluetooth mode. Press “Wireless” button (<3 sec.) to return to last used Wi-Fi mode (Network or Direct). When exiting sleep or standby mode, remember last used input. If another source is being used and a Wi-Fi/AirPlay stream begins, automatically switch to Wi-Fi input, per Apple Spec. 10 min. = Searching = No Connection for 10 minutes. Radio keeps searching. Critical Firmware Problem = Firmware = Red LED – Use Power LED = Searching = Connected “Factory“ Firmware Update (flash drive connected to USB) Off = Update Mode = Initialization Current Wireless Mode = Connected Notes: Hold Setup and Pairing Button 5 sec. “End User” Firmware Update (web page update) Press Setup and Pairing Button = Initialization Update via Web Page Begins = Request WiFi Network info from iOS device. The iOS device prompts user to allow sharing. = Confirm Update Off System Restart = Blue LED = Searching = Connected = Connected Bluetooth Mode = Reset Complete = Initialization System Restart = Connected = Connected Input SSID & Password on Web Page = Searching Click “Allow” on iOS Device Connect With Web Browser Last Used WiFi Mode = Orange or Purple LED Connect iOS Device to USB Port = Broadcasting = Broadcasting = Connected = Initialization Factory Reset (no flash drive connected to USB) = Reset = Pairing Mode Hold WiFi Setup Button 3 sec. LED turns off. Off System Restart = Initialization = Searching Hold BT Pairing Button 3 sec. = Initialization Direct WiFi Mode Hold Setup and Pairing Button 5 sec. First Time Bluetooth Pairing = Searching = Initialization Begin Wi-Fi Stream First Time WiFi Setup Using Login Sharing = Initialization = Purple LED Press Wireless Button First Time WiFi Setup Using JB Connect AC connected = Orange LED ON/STBY AC connected Network WiFi Mode = Connected Hold Wireless Button 3 sec. VOL UP AC connected VOL DN Hold WiFi Setup Button 3 sec. Normal Operation SOURCE AC connected WIRELESS Stadium Factory Reset and Firmware Operations = Updating = Update Complete = Initialization = Searching Stadium “Source” Button Operation VOL UP Last Used Wi-Fi Mode USB Press Wireless Button d? se Green LED blinks 1x Bluetooth radio is OFF Wireless LED indicates Wi-Fi mode (Orange or Purple) Wireless LED indicates last used wireless input Press Source Button for Last Used Wired Input Last Used? Begin Wireless Music Stream -orPress Wireless Button for Last Used Wireless Input st La La st Us ed Mute Orange or Purple LED blink 1x Press Source Button st La VolPlay/ Pause ON/STBY Optical Green LED blinks 2x d? se Press Source Button Prev Next Vol+ VOL DN Press Source Button SOURCE La st Us ed WIRELESS Wireless LED indicates last used wireless input Source Bluetooth On/ Sleep/ Stby Analog Blue LED blink 1x Green LED blinks 3x Bluetooth radio is ON Wireless LED indicates last used wireless input Wireless LED is Blue Wi-Fi radio stays ON Notes: System remembers last used Wired Source and last used Wireless Source. System will wake from Sleep and Standby modes to last used input. System will wake from Sleep on Wi-Fi/AirPlay stream or Bluetooth stream (only if Bluetooth was the last used wireless input). Default (AC Connected) is the Wi-Fi input. Press “Source” button to enter USB mode. Press “Source” button to enter Optical mode. Press “Source” button to enter Analog mode. Press “Source” button to return to USB mode. From any Wireless Input, press “Source” button to go to last used Wired Input. From any Wired Input, press “Wireless” button to go to last used Wireless Input (or start wireless stream). Green LED blinks 1 time for USB mode. Green LED blinks 2 times for Optical mode. Green LED blinks 3 times for Analog mode. Wireless LED blinks 1 time for when “Wireless” button is pressed. Wireless LED shows current/last used wireless connection color. Stadium Volume Buttons Operation WIRELESS SOURCE VOL DN VOL UP Green Power LED blinks 1x for button press VolGreen Power LED blinks when button is held Play/ Pause Max or Min Volume Reached Prev Next Vol+ Mute Source LED stops blinking when max or min volume is reached. On/ Sleep/ Stby 4 sec. 4 sec. LED Flashes every 4 sec. when muted Volume Button Function Volume Up Press to increase the volume one step. Hold to increase the volume multiple steps rapidly. Volume down Press to decrease the volume one step. Hold to decrease the volume multiple steps rapidly. Notes: When holding the volume button, volume changes 5dB per second. LED stops blinking when Max or Min Volume is reached. LED flashes every 4 seconds when Volume is muted. ON/STBY Stadium Remote Buttons Operation Green Power LED flash 1x for button press Prev Next Vol+ Green Power LED flashes when button is held Remote Button Function VolOn/Off From Sleep or Standby mode, press to turn On. From On mode, press to enter Sleep mode. From On mode, hold 3 seconds to enter Standby. Play/Pause Press to play currently selected track. Press to pause currently selected track. Mute Press to mute speaker output. Source Press to select last used Wired Source. Press again to select another Wired Input in the following order: USB Optical Analog Green LED flashes according to input selected, not according to legend above. Volume Up Press to increase the volume one step. Hold to increase the volume multiple steps rapidly. Volume Down Press to decrease the volume one step. Hold to decrease the volume multiple steps rapidly. Next Track Press to skip to the next track in the play list. Hold to fast forward through the current track. Previous Track Press to skip to the previous track in the play list. Hold to fast rewind through the current track. Play/ Pause Mute Source On/ Sleep/ Stby Notes: Manufacturer prefix for all IR codes is 0x 01FE. IR Codes: On/Sleep/Standby Volume Up Volume Down Source Play/Pause Next Track Previous Track Mute Metadata (i) 0x 01FE 1CE3 0x 01FE 12ED 0x 01FE 0DF2 0x 01FE 13EC 0x 01FE 06F9 0x 01FE 40BF 0x 01FE 15EA 0x 01FE 25DA 0x 01FE 28D7 (Press for On/Sleep. Hold for Standby.) (Hold for volume ramp up.) (Hold for volume ramp down.) (Press to select a Wired Input.) (Press to toggle between Play and Pause of the current track.) (Hold for fast forward.) (Hold for fast rewind.) (Press to mute the audio.) (not used)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : wickhama Create Date : 2012:11:14 11:44:51-05:00 Modify Date : 2012:11:14 11:44:51-05:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.5.2 (Windows) Format : application/pdf Title : Visio-Stadium UI Spec R5.vsd Creator : wickhama Document ID : uuid:a37345e8-39c9-42c3-96e1-718a650c731e Instance ID : uuid:6563bf4a-8d34-4ffd-9f91-0bc495d9753e Page Count : 5EXIF Metadata provided by EXIF.tools