Hansong SB300BT SOUND BASE SYSTEM User Manual IGo MENU 21 11 13

Hansong(Nanjing) Technology Ltd. SOUND BASE SYSTEM IGo MENU 21 11 13

User Manual

USER’S MANUALSB-300■ To prevent damage or injury, be sure to read and understand these User’s Manual before using your IGO AUDIO SOUND BASE SYSTEM■ Please keep these instructions handy for future reference. SOUND BASE SYSTEMUSER’S MANUALSB-300■ To prevent damage or injury, be sure to read and understand these User’s Manual before using■ Please keep these instructions handy for future reference. SOUND BASE SYSTEM1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat resisters, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lighting storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For customers in the United StatesImportant Safety InstructionsTHIS CLASS B DIGITAL APPARATUS COMPLIESWITH CANADIAN ICES-003. CET APPAREILNUMÉRIQUE DE LA CLASSE B EST CONFORMEÀ LA NORME NMB-003 DU CANADA.THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS;(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.FCC Information for useThe following FCC statement applies only to the version of thismodel manufactured for sale in the U.S.A. Other versions maynot comply with FCC technical regulation.CAUTIONYou are cautioned that any changes or modifications notexpressly approved in this manual could void your authorityto operate this equipment.NOTE:This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the followingmeasures:– Change the direction or location of the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.WARNING : SHOCK HAZARD - DO NOT OPENAVIS : RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIRThese symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.For more information about collection and recycling of old products and batteries, please contact your local municipal-ity, your waste disposal service or the point of sale where you purchased the items.[Information on Disposal in other Countries outside the European Union]These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.Note for the battery symbol:This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.Important precautions are provided on the product and in these operating instructions to prevent potential personal injury to users and other people as well as damage to property, and to ensure the safe and proper use of the product. Understand the indications, marks and symbols fully before reading the rest of the instructions. Observe the precautions.Explanation of Indications*1: Serious injury refers to loss of sight, injuries, burns (high-and low-temperature), electric shock, broken bones and poisoning, etc. that cause after-effects or require hospitalization or prolonged outpatient treatment.*2: Minor injury refers to injuries, burns and electric shock that require no hospitalization or prolonged outpatient treatment.*3: Damage to property refers to extended damage to houses, buildings, furniture, livestock, pets and others.Explanation of Symbols For customers in EuropeInformation for Users on Collection and Disposal ofOld Equipment and used BatteriesGetting StartedSupplied AccessoriesGetting StartedSupplied AccessoriesSafety PrecautionsRemote control (IRT-S100)AAA R03 batteriesPin CableOptical CableUser’s Manual■ The following accessories are supplied with your IGO AUDIO SOUND BASE SYSTEM. Please make sure that these accessories are included in the package.■ If you wish to use a pin cable or an optical cable other than those supplied, purchase a commercially-available cable suitable for the location, jack type and usage environment of the unit.Accessory QuantityMeaningIndication12111Indicates improper handling or operationcould result in death or serious injury*1.Indicates improper handling or operationcould result in minor injury*2 or damage*3to property.MeaningSymbolIndicates prohibition(an action that is not allowed).What is prohibited will be described in ornear the symbol in either text or pictureform.Indicates an instruction that must befollowed (a compulsory action).Detailed instructions will be described inor near the symbol in either text or pictureform.Indicates disconnection.■ If the unit emits smoke or an unusual smell, disconnect the power plug from the wall outlet immediately. Using the unit under such conditions may result in fire or electric shock. Make sure that the unit no longer emits the smoke and then contact your dealer.■ If the unit produces no sound, disconnect the power plug from the wall outlet immediately. Using the unit under such a condition may result in fire. Contact your dealer for inspection.■ If water or other foreign objects enter the unit, disconnect the power plug from the wall outlet immediately. Using the unit under such conditions may result in fire or electric shock. Contact your dealer for inspection.■ If the cabinet is damaged, disconnect the power plug from the wall outlet immediately. Using the unit under such a condition may result in fire or electric shock. Handling the unit with damaged cabinet may cause injury. Contact your dealer for inspection or repair.■ If the power cord or plug is damaged or becomes hot, press the POWER button on the unit to turn it off. Make sure that the power plug is cooled down and then disconnect from the wall outlet. Using the unit under such conditions may result in fire or electric shock. If the power cord or plug is damaged, contact your dealer for replacement.On abnormal operation and breakdown■ Install this unit where the power plug is easily accessible in case of unforeseen problems or breakdown or when you are not going to use the unit for a long time.■ Do not install this unit in a place subject to water splashes such as the bathroom or outdoors. This may cause fire or electric shock.■ Do not install this unit in an uneven location such as an inclined surface. The TV may fall and cause injury. Install the unit on a level, stable surface.■ Do not install this unit in a location subject to vibration. The unit may move or fall, resulting in injury.■ Fully insert the power plug into a wall outlet. Improper plug connections may cause the unit to overheat and result in fire. Avoid using a damaged power plug or a loose wall outlet.■ Do not place any objects or pets on the unit. Metals, liquids, cosmetics and pets may cause fire or electric shock if they enter the unit. A heavy object placed on the unit may cause injury if it falls.■ If the installed TV is wider than this unit, be careful not to allow any protruding portion of the TV to come into contact with other objects. The TV may fall or be damaged, resulting in injury. A heavy object placed on the unit may cause injury if it falls.On installation ■ Do no install this unit in a place subject to humidity, oil mist or high levels of dust. Installing the unit near a humidifier or cooking stove or in a dusty place may cause fire or electric shock.■ If no measure is taken to prevent the TV from falling or toppling, there may be a high risk of injury.■ Do not block the ventilation holes. Blocked ventilation holes may cause heat build-up and result in fire. · The gap created around the amplifier is there to dissipate its heat emissions. Do not place objects on the amplifier or block the gap. · Do not push the unit against the wall. (Allow a gap of approximately 4 inches between the unit and the wall.) · Do not push the unit into a place with poor ventilation, such as a closet. · Do not place the unit with its front side facing up, on its side or upside down.■ Do not place any equipment exceeding the specified maximum weight on the top, shelf or bottom board of the unit. Prolonged use of the unit with overweight objects placed on it may cause injury or damage to the unit. · The weight limits for the objects to be placed on each board · Do not place any objects other than a TV on the top board.■ Do not repair, modify or disassemble the unit. High-voltage components inside the unit may cause electric shock or fire. Contact your dealer for internal inspection, adjustment or repair.■ Do not: · damage, modify (e.g. use an extension), heat (place close to any heating appliance) the power cord or plug; · pull, pinch or place heavy objects on the power cord or plug; or · forcedly bend, twist or bundle the power cord or plug. Doing so may cause fire or electric shock.■ Do not put foreign objects into the unit. If metals or flammable objects such as papers enter the unit from the ventilation hole, fire or electric shock may result.■ Do not touch the power cord of the unit or the cables/cords of the components connected to this unit during a lightning storm. Doing so may cause electric shock.On operation■ When installing a TV: · Take measures to prevent falling. Failure to observe this caution may cause the TV to fall, resulting in injury or damage. Be extra careful with children.■ Do not exceed the maximum rated output power when using a wall outlet or wiring device. Avoid sharing a single outlet with an unreasonable number of other devices. Doing so may cause fire or electric shock.■ Be careful that some parts of this unit may become hot during use.■ If you move the unit to a remote place (e.g. moving house) cover it with an object such as a blanket to avoid damage. Do not subject the unit to strong impact or vibration.■ Do not spray volatile solvents such as insecticides. Do not allow rubber or plastic/vinyl products to come into prolonged contact with the unit. This may cause deterioration or damage to the surface finishing.■ Avoid placing magnetic cards such as ATM cards or video tapes near the unit. Data or information stored inside may be lost due to magnetism from the unit.■ External input images or sound may be slightly delayed causing discomfort to users; • when enjoying Karaoke using a Karaoke equipment connected to the unit; or • when listening to the sound from a DVD or video directly connected to the unit.On operationDisconnect the power plug from the wall outlet before cleaning the unit.Failure to observe this caution may cause electric shock.■ Do not use benzene or alcohol. · Do not use any volatile solvents such as benzene or alcohol. Use of such substances may cause the cabinet to deteriorate or damage the surface finishing.Disconnect the power plug from the wall outlet before cleaning the unit.Failure to observe this caution may cause electric shock.■ Cleaning the cabinet and control panel. · Remove the dirt and dust accumulated on the cabinet and then lightly wipe with a commercially-available cleaning cloth or soft cloth. Wiping or rubbing the cabinet or control panel with a dirty cloth or an abrasive cloth may damage or scratch the cabinet surface. · When using a chemical cleaning cloth, follow the instructions on the package.On cleaningOn operation■ FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for any damages arising out of or in connection with a natural disaster such as an earthquake or lightning, fire, act of any third party, other accidents, intentional or negligent act of customer, misuse and/or use of this product under other abnormal conditions.■ FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for any incidental damages arising out of or in connection with the use or unavailability of this product (including damages to business interests, business interruption and loss of viewing fees).■ FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for any damages arising out of or in connection with non-observance of the contents of these Operating Instructions.■ FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for compensation for and/or incidental damages arising out of or in connection with any data, including videos, pictures and sound, that failed to be recorded correctly in the recording device connected to this unit, or that were altered or lost.■ FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for any damages arising out of or in connection with malfunctions, defects or improper operations (including breakdown of the recording device connected to the unit and alteration or loss of recorded data) occurred by adding other equipment connected to the unit.■ The settings stored in the unit may be altered or lost due to malfunction or noise including static electricity. FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for such an incidence.Disclaimer■ Dispose of this product following the local guidelines or regulations for its disposal. Contact your local government for more detailed information on disposal.On disposal■ If you are not going to use the unit for a long time (e.g. if you are travelling) be sure to disconnect the power plug from the wall outlet for safety. If the power plug is not disconnected, fire may result in the event of breakdown. The unit is not completely disconnected from the power source even if the TV monitor is turned off by pressing the POWER button on the TV or remote control. To completely disconnect this unit from the power source, disconnect the power plug from the wall outlet.■ Do not pull the power cord to disconnect the power plug. Pulling the power cord to disconnect the power plug from the wall outlet may cause damage to the power cord or plug, resulting in fire or electrical shock. Grasp the power plug to disconnect it.■ Avoid plugging or unplugging the power plug with wet hands. Doing so may cause electric shock.■ Do not hang or climb on this unit or TV; and do not use this unit as a step ladder. Doing so may damage the unit or TV or cause it to fall or topple, resulting in injury. Be extra careful with children.■ Disconnect and inspect the power plug occasionally. Clean the dirt and dust accumulated on the blades and the surface on which the blades are installed. Failure to observe this warning may cause the insulation to deteriorate, resulting in fire.On cleaning■ Do not install this unit in a place subject to high temperature. Installing the unit in a place subject to high temperature, such as a location near a heater may cause fire. It may also deform or damage the cabinet, resulting in electric shock.On installation■ To move or carry this unit: · When moving the unit, disconnect the unit’s power plug, and any cables and wires connected to the unit and topple-prevention device. Moving the unit without disconnecting these components may cause fire or electric shock from a damaged power cord or injury due the TV toppling from the top of the unit. · Handle with care to avoid impact. Failure to observe this caution could result in damage to the unit and injury. · Remove TV from unit before moving. TV could topple and cause serious injury or damage.■ Avoid prolonged listening to the audio at high volume levels. Listening to sound at such a high volume that it irritates ears may damage your hearing.■ Do not allow rubber or plastic/vinyl products to come into prolonged contact with the unit. This may cause deterioration or damage to the surface finishing.■ Do not place objects that are easily influenced by magnetism, such as clocks, on this unit. This may cause these objects to stop working.■ Do not place hot objects such as a heated pan or kettle on the unit. The top surface may break and cause injury or damage to the unit.■ Batteries used for the remote control: · Do not use any batteries other than those specified. · Follow the polarity markings inside the compartment. · Do not charge, heat, disassemble or short-circuit the batteries. · Do not expose the batteries to excessive heat such as fire or direct sunlight. · Do not leave expired or drained batteries inside the remote control. · Do not use different types of batteries or a new battery with an old one at the same time. Failure to observe these cautions may result in burns or injury due to battery leakage or explosion. Leaked battery fluid may harm your eyes or skin. If it gets in contact with your eyes or skin, flush the affected area with clean water and seek medical attention immediately. If battery fluid comes in contact with clothing, flush the affected area with clean water immediately. If battery fluid has spilled on the apparatus, wipe it off avoiding direct contact.Notes and Precautions on useFront viewControl panelAbout this UnitControl panel (see below)Front speaker (right)Center speaker• Functioning when surround mode is ON.Front speaker (left)TV > DVD > AUDIO 1> AUDIO 2 (Bluetooth)POWER• Press to turn the power ON and OFF. INPUT selector • Each time you press the button, the input source changes as follows:VOLUME +/–• Press to adjust the volume level.POWER indicatorDisplay panelRear viewRemote controlInformation display• Displays the information on the status.• The information display will disappear if you do not press any operation button within five seconds.Power cord • When connecting external equipment such as a TV or BD/DVD player, connect the power cord to the wall outlet only after the necessary connections have been completed.Amplifier connectionsOptical digital audio input jacks • “TV” is only for connection to the optical digital output jack on the TV.• Use these jacks to connect external equipment with an optical digital audio output jack.Analog audio input jacks• Use these jacks to connect external equipment with an analog audio output jack.• Audio 2 is purposely used for Bluetooth, Please do not remove the caps■ Buttons on the remote control and their key functions are as described below (some buttons may have different functions from ordinary operations).Signal transmitter• To operate the unit, point it at the remote sensor on the unit.POWER• Press to switch “Power ON” and “Standby”.MUTING• Press to mute the sound temporarily. Press again to restore the sound.INPUT SELECTOR • Press to select the input source.SURROUND MODE• Press to turn the surround mode ON and OFF.VOLUME +/–• Press to adjust the volume level.BASS• Press to switch the BASS BOOST settingBattery compartment cover• Remove this cover to insert batteries.Front viewRear viewWebsite : http://www.igoaudio.com/Printed in Malaysia650-0SB300-00 (Open) size:750 x 315mm / (Close) size: 150 x 158mm / 11.11.13 / 19.11.13 / 20.11.13 / 21.11.13Sound Base SB-300Sound Base SB-300Remote sensor Input indicator• Indicates the selected input.Sound Base SB-300Instruction
Sound Base SB-300Sound Base SB-300■ Point the remote control at the remote sensor on the unit.■ Avoid exposing the remote sensor to intense light. The remote control may not function under such a condition.■ Do not place obstacles in the path between the remote control and remote sensor. Otherwise, the remote control may not work or will respond slowly.Check the power plug connection.■ Insert the power plug into the wall outlet securely.■ Contact an electrician in the event of loose outlet.Check the polarity of the batteries inserted in the remote control.Check if old batteries are being used.■ Check the polarity (+, –) markings on the batteries.■ Replace with new batteries and see if the problem is remedied.Check for any loose jacks or disconnected cables.■ Securely connect the unit and equipment.Crack sound from the cabinet.■ A crack sound is heard when the cabinet expands and contracts due to changes in the room temperature. This is not an issue unless you experience a problem in the sound.The unit becomes hot even when it is not in use.■ The temperature of the unit rises slightly even in standby mode.Connecting a TV■ Read the operating instructions of the connected equipment together with these instructions.■ Before connecting external equipment, be sure to turn them off and unplug the power cord of the equipment. When you wish to add any equipment, turn off and unplug the IGO AUDIO SOUND BASE SYSTEM as well as the equipment being installed before proceeding.■ Connect the power cord of each piece of equipment only after all the connections have been completed.Cables to be usedWhiteRedWhiteRedOptical cable (supplied)• Check the jack type of the connected equipment before purchasing additional cable. The type of the plug to be connected to the unit is Pin cable (supplied)For connections via an optical cable■ Set the digital audio output setting on the connected equipment (such as a TV) to “PCM”, etc. Refer to the operating instructions of the connected equipment for setup.Connecting the Video PlayerSelecting the input source■ Power on IGO Amplifer, select audio source to (AUDIO 2).■ Go to the Bluetooth manager of your device, search for a new Bluetooth connection name IGO Audio.■ Confirm the connection and your device is automatically pairing with the IGO Audio. A single “DU” tone voice will sound when pairing successfully, You do not need any pin-code for connection.■ IGO Audio is now connected and ready to play music from your device.BluetoothWhen using Audio PlayerAmplifier connectionsWhen the TV set has optical (audio digital) OUT, connect using an opticalcable.When the TV set does not have optical OUT, connect using a pin cable.Optical cable(supplied)To OpticalDigital AudioIN (TV)SignalTo OpticalDigital Audio OUTPin cable(supplied)To AnalogAudio OUT • Refer to the TV operating instructions for connecting.• TV volume should be set to “0” or “Muting”. Simultaneous sound output by both TV and RACK would result in an unpleasant audio experience.The optical digital audio inputjack is covered. Just insert theplug into the covered jack aftermaking sure it is pointing thecorrect way. * Connect to the Digital Audio IN (TV).WhiteRedWhiteRedWhiteRedWhiteRedSignalTVVideo cord (Refer to the operatinginstructions of theconnected equipmentfor set up.)When using optical cableSignalPlayerTVOptical cableOptical cableTo Optical DigitalAudio IN (DVD)To Optical DigitalAudio IN (DVD)To Video(OUT)To Video (IN)Refer to TV connectionWhen using HDMI cable or pin cablePlayerTVTo Video(OUT)Refer toTV connection(Refer to the operating instructions ofthe connected equipment for set up.)orHDMI cable(not supplied)HDMI cable(not supplied)Pin cable(not supplied)Pin cable(not supplied)Connecting the Audio PlayerConnecting the Power CordWhiteRedWhiteRedWhiteRedPin cable (1 piece supplied, for connection to either TV or audio player)Pin cable (not supplied)■ Refer to the operating instructions of each equipment to connect equipment.■ Cables to be used■ Be sure to connect the power cord only after all the connections have been done.■ INFO• The sound volume may be lower if an audio cable with a built-in resistor is used.• When the unit is connected to a TV or player with an audio cable, use the remote control of the connected equipment to change the sound setting for sound multiplex broadcasting programs.■ INFO• This unit will automatically turn to standby mode if there is no signal from selected input within ten minutes.CAUTION■ About the remote control • Do not drop, swing or apply impact to the remote control. • Do not splash water on the remote control or place it on a wet object. • Do not disassemble the remote control. • Do not place the remote control in a place subject to high temperature or humidity.■ INFO• About batteries • Battery life differs depending on how the battery is used. Replace both of two batteries with new ones if you experience difficulty in using the remote control or if the signal transmission distance shortens. • Dispose of the used batteries following your local regulations for disposal.Amplifier connectionsWhiteRedMini plugCD PlayerAudio Player etc.To Audio OUTTo AnalogAudio OUT Connecting to the wall outlet should be the last connection made.■ Firmly insert the power plug fully into outlet.■ Be sure to power OFF the unit before disconnecting the power plug.■ To close the cover, insert the protrusion at the bottom of the cover into the notch on the remote control and then push down the top of the cover until a click is heard.Inserting batteries into theremote controlAbout the remote control’soperating rangeResetting the unit in the eventof freeze-upThe sound is output from boththe unit and the TVUnable to operate the unit withthe remote controlPreparing the Remote ControlThese do not Constitutea Malfunction■ Use this troubleshooting guide to check possible solutions for symptoms such as improper functioning of the unit.■ Should the problem persists, disconnect the power plug from the wall outlet and consult your dealer.■ Design, specifications and software used are subject to change without prior notice for product improvement.■ The material designation of major plastic parts of this product are indicated for recycling purpose.■ Some exaggerations and omissions are made to the illustrations and monitor displays featured in these instructions to facilitate understanding. Actual items may vary from the illustrations.Find Solution accordingto the Symptoms■ Use two R03 or LR03 (size AAA) batteries.■ Two R03 (size AAA) batteries are supplied with the unit. · Remove the cover and insert the batteries. 1 To remove the cover, lift its latch while pressing it in the  direction. 2 Check the polarity markings + and - to insert the batteries correctly.1Bottom of the coverTop of the cover2Turning on the Poweror■ After connecting your external equipment, turn on the power of the unit. Make sure that the standby indicator on the front panel is lit in red, then press on the unit or on the remote control.1■ Selecting the input source with the INPUT SELECTOR button on the front panel. Select the input source by pressing button repeatedly. The input source changes in the following order: (Actual change of the input source may be slower than the display.)■ You can select one of the four BASS levels. Select the desired BASS level by pressing button repeatedly. ■ BASS level is displayed on the front display panel.1Make sure that the standbyindicator in standby mode.The standby indicator is OFFand the input indicator light is ON. Press on thefront panel to turnon the power.Press on theremote control to turnon the power.■ From the remote sensor: Distance – Within 16 ft (5m) Angle – Within 30˚ (horizontal); Within 20˚ (vertical)RemotesensorWithin about16 ft (5 m)About 30º About 30ºFunctionsListening to the SoundTroubleshootingCheck the Following FirstOthersSpecificationsInstallationConnecting a TV and PlayerInput sequence Display panelTVDVDAUDIO 1AUDIO 2(BLUETOOTH)■ Selecting the input source with the remote control Press the INPUT button for the desired source.Adjusting the volume levelTurning off the sound temporarily (Muting)OperationThe power does not turn onThe display disappearsSelecting BASS level during playback Press to control the volume level.1VOL12 1 When decreasing the volume level, two indicators on the left side flash. 2 When increasing the volume level, three indicators on the right side flash. ■ The volume level is displayed by five indicators on the front display panel. ■ The volume level can be controlled by pressing on the front panel.1 Press .1 ■ Input indicator will flash. ■ Press again to return to the original volume level. ■ The mute mode is cancelled if you control the volume or turn the unit off/on.BASS levelBASS 0(Flat)BASS 2(High boost)BASS 1(Low boost:Default)BASS 3(EX. Highboost)Display panelPolarityPolarity■ Perform the following operation in the event that the unit cannot be operated using the control buttons on the remote control or the unit; or if the connected equipment is not recognized.How to reset 1 Disconnect the power plug from the wall outlet. 2 Wait for more than 1 minute. 3 Connect the power plug to the wall outlet and turn on the power.Check If: Possible Solution / OtherThe power plug is disconnected.• Connect the power plug to the wall outlet.Check If: Possible Solution / OtherThe sound is a digital sound not supported by the unit.• Check if it is a digital sound supported by the unit.SoundNo sound output (General)Check If: Possible Solution / OtherA button was pressed within the last five seconds.• The information display will disappear if you do not press any operation button within five seconds.Sudden Power off Check If: Possible Solution / OtherThere is an input signal. • This unit will automatically turn to standby mode if there is no signal from selected input within ten minutes.The equipment is not connected correctly.• Check the connections between the unit and equipment. If there is no connection problem, there could be a problem with the cable. Use another cable to connect the equipment and see if the problem is solved.The digital signal is not supported by the unit.• Check if the digital signal is supported by the unit.Check If: Possible Solution / OtherThere is an obstacle in the path between the remote control and remote sensor.The batteries of the remote control are empty.The unit can be operated with the buttons on the unit.• Remove the obstacle.• Replace the batteries with new ones.• If you are still unable to operate the unit using the remote control even after trying the above possible solutions, the remote could be defective. Consult your dealer.Check If: Possible Solution / OtherThe volume level is set to minimum.• Increase the volume by pressing .VOLInput indicator is flashing on the display panel.• Muting is cancelled by pressing . (Muting can also be canceled by pressing .)VOLSound is interrupted or there is noiseCheck If: Possible Solution / OtherCheck TV volume level. • Set TV volume to “0” or “mute”.TypeAC power sourcePower consumptionDimensions inch(W × D × H) (Approx.) mmMaximum loadMass (Approx.) LeftSpeakers Center Right Subwoofer Power output (Rated) Power output (Reference) Optical digital audio IN (TV/optical digital) Analog audio input jackOperating environment conditionsSupported Audio Decode FormatsAccessoriesFor USA Model Power output andtotal harmonic distortion (FTC)InputTerminal AMP Output PowerIGO SOUND BASE SYSTEMAC 110V - 240V 50/60Hz32 W / Standby mode: 0.5 W38½” × 15" × 4"980 mm × 380 mm × 99 mm66 lbs (30 kg)30.8 Ibs (14 kg)Cone type; Full Range (80 mm) 6 Ω Cone type; Full Range (80 mm) 6 Ω Cone type; Full Range (80 mm) 6 Ω Cone type; Subwoofer (80 mm) 3 Ω × 4Front L / Front R: 20 W + 20 W (at 6 Ω, 1 kHz 1 % THD)S/PDIF (OPTICAL)Pin jack (200 mV [rms], 22 kΩ and above)Bluetooth Ver 3.0 (A2DP, aptX)Temperature: 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C);Relative humidity: 20 % to 80 % (no condensation)DIGITAL IN (OPTICAL): PCM 2ch (Sampling Frequency:less than 192 kHz)See “Supplied Accessories” Front L + Front R: With 6 Ω loads, both channels driven,from 150-20,000 Hz; rated 20 W per channel minimumRMS power, with no more than 1 % total harmonic distortionfrom 250 mW to rate output.Front L / Front R: 28 W (per channel at 6 Ω, 1 kHz) Center: 28 W (at 6 Ω, 1 kHz)Subwoofer 1/2: 27 W (per channel at 6 Ω, 100 Hz)Total Power: 138WEnjoying Surround SoundTurning on SURROUND mode Turn on SURROUND mode by pressing1OFFONSRS and the symbol are trademarksof SRS Labs, Inc.SRS technology is incorporated underlicense from SRS Labs, Inc.■ Each time you press the surround mode changes as ON/OFF.The Bluetooth word mark and logo are registered or owned by Bluetooth SIG, Inc,and any use of such marks by FORMOSA PROSONIC INDUSTRIES BERHAD is under license.Other trademarks and trade names are those of their respective owners.aptX word & logos marked with a TM or ® are trademarks registered or owned by CSR plc or one of itsgroup companies and may be registered in one or more jurisdictions except that not all such marks awregistered in all countries where products are available.Sound Base SB-300SRS and the symbol are trademarks of SRS Labs, Inc.SRS technology is incorporated under license from SRS Labs, Inc.

Navigation menu