Hansong SB300BT SOUND BASE SYSTEM User Manual IGo MENU 21 11 13
Hansong(Nanjing) Technology Ltd. SOUND BASE SYSTEM IGo MENU 21 11 13
Hansong >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2145655 |
| Application ID | voSwRi89t7Qd+xJdZ8I6yA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 67.46kB (843297 bits) |
| Date Submitted | 2013-12-18 00:00:00 |
| Date Available | 2013-12-19 00:00:00 |
| Creation Date | 2013-11-21 10:54:38 |
| Producing Software | Adobe PDF library 8.00 |
| Document Lastmod | 2013-11-21 11:03:39 |
| Document Title | IGo (MENU) 21.11.13 |
| Document Creator | Adobe Illustrator CS3 |
For customers in the United States For customers in Europe Safety Precautions Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. SOUND BASE SYSTEM USER’S MANUAL SB-300 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat resisters, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. Sound Base SB-300 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol: Important precautions are provided on the product and in these operating instructions to prevent potential personal injury to users and other people as well as damage to property, and to ensure the safe and proper use of the product. Understand the indications, marks and symbols fully before reading the rest of the instructions. Observe the precautions. ■ To prevent damage or injury, be sure to read and understand these User’s Manual before using your IGO AUDIO SOUND BASE SYSTEM ■ Please keep these instructions handy for future reference. Indication Indicates improper handling or operation could result in minor injury*2 or damage*3 to property. *1: *2: ■ Serious injury refers to loss of sight, injuries, burns (high-and low-temperature), electric shock, broken bones and poisoning, etc. that cause after-effects or require hospitalization or prolonged outpatient treatment. ■ ■ ■ Minor injury refers to injuries, burns and electric shock that require no hospitalization or prolonged outpatient treatment. *3: Damage to property refers to extended damage to houses, buildings, furniture, livestock, pets and others. Explanation of Symbols Symbol Instruction THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB-003 DU CANADA. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS; ■ Accessory Quantity Remote control (IRT-S100) ■ (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. FCC Information for use The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulation. ■ AAA R03 batteries NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Change the direction or location of the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. (Open) size:750 x 315mm / (Close) size: 150 x 158mm / 11.11.13 / 19.11.13 / 20.11.13 / 21.11.13 ■ Pin Cable ■ Optical Cable ■ TEM E SYS BAS SOUND ’S USER damage or injury, nd these and understa . to read reference be sure for future ns handy instructio these ■ To prevent keep ■ Please MANUAL SB-300 User’s Manual before using ■ If water or other foreign objects enter the unit, disconnect the power plug from the wall outlet immediately. Using the unit under such conditions may result in fire or electric shock. Contact your dealer for inspection. ■ · ■ Do not touch the power cord of the unit or the cables/cords of the components connected to this unit during a lightning storm. Doing so may cause electric shock. Disconnect and inspect the power plug occasionally. Clean the dirt and dust accumulated on the blades and the surface on which the blades are installed. ■ ■ Do not install this unit in a place subject to high temperature. Installing the unit in a place subject to high temperature, such as a location near a heater may cause fire. It may also deform or damage the cabinet, resulting in electric shock. ■ ■ ■ ■ Do not place any equipment exceeding the specified maximum weight on the top, shelf or bottom board of the unit. Prolonged use of the unit with overweight objects placed on it may cause injury or damage to the unit. Avoid prolonged listening to the audio at high volume levels. Listening to sound at such a high volume that it irritates ears may damage your hearing. Do not place objects that are easily influenced by magnetism, such as clocks, on this unit. This may cause these objects to stop working. Do not place hot objects such as a heated pan or kettle on the unit. The top surface may break and cause injury or damage to the unit. Batteries used for the remote control: Do not use any batteries other than those specified. · · Follow the polarity markings inside the compartment. Do not charge, heat, disassemble or short-circuit the · batteries. Do not expose the batteries to excessive heat such · as fire or direct sunlight. Do not leave expired or drained batteries inside the · remote control. Do not use types of batteries or a new · battery withdifferent an old one at the same time. · · Remove TV from unit before moving. On cleaning TV could topple and cause serious injury or damage. ■ ■ When installing a TV: Take measures to prevent falling. Failure to observe this caution may cause the TV to fall, resulting in injury or damage. Be extra careful with children. · Do not exceed the maximum rated output power when using a wall outlet or wiring device. Avoid sharing a single outlet with an unreasonable number of other devices. ■ ■ Disconnect the power plug from the wall outlet before cleaning the unit. Failure to observe this caution may cause electric shock. ■ ■ If the power plug is not disconnected, fire may result in the event of breakdown. The unit is not completely disconnected from the power source even if the TV monitor is turned off by pressing the POWER button on the TV or remote control. To completely disconnect this unit from the power source, disconnect the power plug from the wall outlet. · Cleaning the cabinet and control panel. Remove the dirt and dust accumulated on the cabinet and then lightly wipe with a commercially-available cleaning cloth or soft cloth. Wiping or rubbing the cabinet or control panel with a dirty cloth or an abrasive cloth may damage or scratch the cabinet surface. · using a chemical cleaning cloth, follow the · When instructions on the package. ■ ■ FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for any damages arising out of or in connection with a natural disaster such as an earthquake or lightning, fire, act of any third party, other accidents, intentional or negligent act of customer, misuse and/or use of this product under other abnormal conditions. FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for any incidental damages arising out of or in connection with the use or unavailability of this product (including damages to business interests, business interruption and loss of viewing fees). FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for any damages arising out of or in connection with non-observance of the contents of these Operating Instructions. ■ FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for compensation for and/or incidental damages arising out of or in connection with any data, including videos, pictures and sound, that failed to be recorded correctly in the recording device connected to this unit, or that were altered or lost. ■ FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for any damages arising out of or in connection with malfunctions, defects or improper operations (including breakdown of the recording device connected to the unit and alteration or loss of recorded data) occurred by adding other equipment connected to the unit. ■ The settings stored in the unit may be altered or lost due to malfunction or noise including static electricity. FORMOSA PROSONIC INDUSTRIES BERHAD shall not be liable for such an incidence. Sound Base SB-300 Information display • Displays the information on the status. • The information display will disappear if you do not press any operation button within five seconds. Rear view Amplifier connections Power cord • When connecting external equipment such as a TV or BD/DVD player, connect the power cord to the wall outlet only after the necessary connections have been completed. Optical digital audio input jacks • “TV” is only for connection to the optical digital output jack on the TV. • Use these jacks to connect external equipment with an optical digital audio output jack. ■ Front view Center speaker • Functioning when surround mode is ON. Buttons on the remote control and their key functions are as described below (some buttons may have different functions from ordinary operations). Front view Signal transmitter • To operate the unit, point it at the remote sensor on the unit. Control panel (see below) POWER • Press to switch “Power ON” and “Standby”. MUTING • Press to mute the sound temporarily. Press again to restore the sound. Front speaker (left) Front speaker (right) INPUT SELECTOR • Press to select the input source. Control panel SURROUND MODE • Press to turn the surround mode ON and OFF. POWER • Press to turn the power ON and OFF. Remote sensor VOLUME +/– • Press to adjust the volume level. BASS • Press to switch the BASS BOOST setting On operation ■ Be careful that some parts of this unit may become hot during use. ■ If you move the unit to a remote place (e.g. moving house) cover it with an object such as a blanket to avoid damage. Do not subject the unit to strong impact or vibration. ■ Do not spray volatile solvents such as insecticides. Do not allow rubber or plastic/vinyl products to come into prolonged contact with the unit. This may cause deterioration or damage to the surface finishing. ■ Avoid placing magnetic cards such as ATM cards or video tapes near the unit. Data or information stored inside may be lost due to magnetism from the unit. ■ External input images or sound may be slightly delayed causing discomfort to users; • when enjoying Karaoke using a Karaoke equipment connected to the unit; or • when listening to the sound from a DVD or video directly connected to the unit. Analog audio input jacks • Use these jacks to connect external equipment with an analog audio output jack. • Audio 2 is purposely used for Bluetooth, Please do not remove the caps Remote control Notes and Precautions on use Avoid plugging or unplugging the power plug with wet hands. Doing so may cause electric shock. If you are not going to use the unit for a long time (e.g. if you are travelling) be sure to disconnect the power plug from the wall outlet for safety. Do not use benzene or alcohol. Do not use any volatile solvents such as benzene or alcohol. Use of such substances may cause the cabinet to deteriorate or damage the surface finishing. Input indicator • Indicates the selected input. Disconnect the power plug from the wall outlet before cleaning the unit. Failure to observe this caution may cause electric shock. Do not pull the power cord to disconnect the power plug. Pulling the power cord to disconnect the power plug from the wall outlet may cause damage to the power cord or plug, resulting in fire or electrical shock. Grasp the power plug to disconnect it. Do not hang or climb on this unit or TV; and do not use this unit as a step ladder. Doing so may damage the unit or TV or cause it to fall or topple, resulting in injury. Be extra careful with children. ■ About this Unit Doing so may cause fire or electric shock. ■ Dispose of this product following the local guidelines or regulations for its disposal. Contact your local government for more detailed information on disposal. Disclaimer If battery fluid comes in contact with clothing, flush the affected area with clean water immediately. If battery fluid has spilled on the apparatus, wipe it off avoiding direct contact. On operation ■ Leaked battery fluid may harm your eyes or skin. If it gets in contact with your eyes or skin, flush the affected area with clean water and seek medical attention immediately. · Handle with care to avoid impact. Display panel On disposal Do not allow rubber or plastic/vinyl products to come into prolonged contact with the unit. This may cause deterioration or damage to the surface finishing. Failure to observe these cautions may result in burns or injury due to battery leakage or explosion. To move or carry this unit: When moving the unit, disconnect the unit’s power plug, and any cables and wires connected to the unit and topple-prevention device. Moving the unit without disconnecting these components may cause fire or electric shock from a damaged power cord or injury due the TV toppling from the top of the unit. Failure to observe this caution could result in damage to the unit and injury. ■ On installation Do not block the ventilation holes. Blocked ventilation holes may cause heat build-up and result in fire. The gap created around the amplifier is there to dissipate its heat emissions. Do not place objects on the amplifier or block the gap. Do not push the unit against the wall. (Allow a gap of approximately 4 inches between the unit and the wall.) Do not push the unit into a place with poor ventilation, such as a closet. Do not place the unit with its front side facing up, on its side or upside down. ■ The weight limits for the objects to be placed on · each board Do not place any objects other than a TV on · the top board. Do not put foreign objects into the unit. If metals or flammable objects such as papers enter the unit from the ventilation hole, fire or electric shock may result. Failure to observe this warning may cause the insulation to deteriorate, resulting in fire. If the cabinet is damaged, disconnect the power plug from the wall outlet immediately. If the power cord or plug is damaged or becomes hot, press the POWER button on the unit to turn it off. Make sure that the power plug is cooled down and then disconnect from the wall outlet. Using the unit under such conditions may result in fire or electric shock. If the power cord or plug is damaged, contact your dealer for replacement. Do not: damage, modify (e.g. use an extension), heat (place close to any heating appliance) the power cord or plug; pull, pinch or place heavy objects on the power cord or plug; or forcedly bend, twist or bundle the power cord or plug. Doing so may cause fire or electric shock. If no measure is taken to prevent the TV from falling or toppling, there may be a high risk of injury. · · · Do not repair, modify or disassemble the unit. High-voltage components inside the unit may cause electric shock or fire. Contact your dealer for internal inspection, adjustment or repair. On cleaning Using the unit under such a condition may result in fire or electric shock. Handling the unit with damaged cabinet may cause injury. Contact your dealer for inspection or repair. User’s Manual ■ Using the unit under such a condition may result in fire. Contact your dealer for inspection. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. If the unit produces no sound, disconnect the power plug from the wall outlet immediately. Fully insert the power plug into a wall outlet. Improper plug connections may cause the unit to overheat and result in fire. Avoid using a damaged power plug or a loose wall outlet. Do no install this unit in a place subject to humidity, oil mist or high levels of dust. Installing the unit near a humidifier or cooking stove or in a dusty place may cause fire or electric shock. · · · If the unit emits smoke or an unusual smell, disconnect the power plug from the wall outlet immediately. Using the unit under such conditions may result in fire or electric shock. Make sure that the unit no longer emits the smoke and then contact your dealer. ■ On operation On abnormal operation and breakdown ■ ■ Do not install this unit in a location subject to vibration. The unit may move or fall, resulting in injury. If the installed TV is wider than this unit, be careful not to allow any protruding portion of the TV to come into contact with other objects. The TV may fall or be damaged, resulting in injury. A heavy object placed on the unit may cause injury if it falls. ■ If you wish to use a pin cable or an optical cable other than those supplied, purchase a commercially-available cable suitable for the location, jack type and usage environment of the unit. ■ Do not install this unit in an uneven location such as an inclined surface. The TV may fall and cause injury. Install the unit on a level, stable surface. ■ Supplied Accessories The following accessories are supplied with your IGO AUDIO SOUND BASE SYSTEM. Please make sure that these accessories are included in the package. Do not install this unit in a place subject to water splashes such as the bathroom or outdoors. This may cause fire or electric shock. Do not place any objects or pets on the unit. Metals, liquids, cosmetics and pets may cause fire or electric shock if they enter the unit. A heavy object placed on the unit may cause injury if it falls. Indicates an instruction that must be followed (a compulsory action). Detailed instructions will be described in or near the symbol in either text or picture form. Indicates disconnection. Install this unit where the power plug is easily accessible in case of unforeseen problems or breakdown or when you are not going to use the unit for a long time. ■ Meaning Indicates prohibition (an action that is not allowed). What is prohibited will be described in or near the symbol in either text or picture form. Getting Started WARNING : SHOCK HAZARD - DO NOT OPEN AVIS : RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR Printed in Malaysia 650-0SB300-00 Meaning Indicates improper handling or operation could result in death or serious injury*1. This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. ■ Website : http://www.igoaudio.com/ ■ Explanation of Indications 13. Unplug this apparatus during lighting storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. On installation Sound Base SB-300 Rear view VOLUME +/– • Press to adjust the volume level. POWER indicator INPUT selector • Each time you press the button, the input source changes as follows: TV > DVD > AUDIO 1> AUDIO 2 (Bluetooth) Battery compartment cover • Remove this cover to insert batteries. ■ ■ When using HDMI cable or pin cable (Refer to the operating instructions of the connected equipment for set up.) Read the operating instructions of the connected equipment together with these instructions. ■ Be sure to connect the power cord only after all the connections have been done. ■ Functions Listening to the Sound After connecting your external equipment, turn on the power of the unit. Make sure that the standby indicator on on the unit or To Video (OUT) Troubleshooting Adjusting the volume level 1 the front panel is lit in red, then press Player Before connecting external equipment, be sure to turn them off and unplug the power cord of the equipment. When you wish to add any equipment, turn off and unplug the IGO AUDIO SOUND BASE SYSTEM as well as the equipment being installed before proceeding. Turning on the Power 1 Press Check the Following First VOL to control the volume level. on the remote control. 1 When decreasing the volume level, two indicators on the left side flash. Connect the power cord of each piece of equipment only after all the connections have been completed. Sound Base SB-300 Pin cable HDMI cable or (not supplied) (not supplied) Cables to be used 2 When increasing the volume level, three indicators on the right side flash. Sound Base SB-300 Optical cable (supplied) • Check the jack type of the connected equipment before purchasing additional cable. The type of the plug to be connected to the unit is White White Red Red For connections via an optical cable ■ Set the digital audio output setting on the connected equipment (such as a TV) to “PCM”, etc. Refer to the operating instructions of the connected equipment for setup. Connecting to the wall outlet should be the last connection made. Player ■ ■ To Video (OUT) Connecting a TV ■ ■ ■ or Firmly insert the power plug fully into outlet. Be sure to power OFF the unit before disconnecting the power plug. Preparing the Remote Control Signal Optical cable Press on the remote control to turn on the power. Press on the front panel to turn on the power. ■ ■ ■ Refer to TV connection Video cord To Video (IN) (Refer to the operating instructions of the connected equipment for set up.) Connecting the Audio Player ■ Cables to be used Optical cable (supplied) To Optical Digital Audio IN (TV) Two R03 (size AAA) batteries are supplied with the unit. · Remove the cover and insert the batteries. 1 To remove the cover, lift its latch it in the direction. while pressing 2 Check the polarity markings + and - to insert the batteries correctly. Bottom of the cover White White Red Red Press Check the polarity (+, –) markings on the batteries. ■ Replace with new batteries and see if the problem is remedied. again to return to the original volume level. ■ About the remote control’s operating range ■ ■ ■ Point the remote control at the remote sensor on the unit. The unit becomes hot even when it is not in use. ■ The temperature of the unit rises slightly even in standby mode. Find Solution according to the Symptoms ■ BASS 2 (High boost) ■ Display panel BASS 3 (EX. High boost) TV Red ■ Mini plug Refer to the operating instructions of each equipment to connect equipment. DVD Red White Sound Base SB-300 When using Audio Player Amplifier connections ■ White Red To Audio OUT TV Red To Analog Audio OUT White • TV volume should be set to “0” or “Muting”. Simultaneous sound output by both TV and RACK would result in an unpleasant audio experience. ■ INFO • The sound volume may be lower if an audio cable with a built-in resistor is used. • When the unit is connected to a TV or player with an audio cable, use the remote control of the connected equipment to change the sound setting for sound multiplex broadcasting programs. ■ INFO • Battery life differs depending on how the battery is used. Replace both of two batteries with new ones if you experience difficulty in using the remote control or if the signal transmission distance shortens. Red CD Player AUDIO 2 (BLUETOOTH) About 30º To close the cover, insert the protrusion at the bottom of the cover into the notch on the remote control and then push down the top of the cover until a click is heard. ■ ■ • About batteries White AUDIO 1 Within about 16 ft (5 m) Audio Player etc. About 30º • Refer to the TV operating instructions for connecting. Remote sensor • Dispose of the used batteries following your local regulations for disposal. From the remote sensor: Distance – Within 16 ft (5m) Angle – Within 30˚ (horizontal); Within 20˚ (vertical) CAUTION ■ About the remote control • Do not drop, swing or apply impact to the remote control. • Do not splash water on the remote control or place it on a wet object. • Do not disassemble the remote control. • Do not place the remote control in a place subject to high temperature or humidity. ■ ■ ■ ■ Enjoying Surround Sound Power on IGO Amplifer, select audio source to (AUDIO 2). Go to the Bluetooth manager of your device, search for a new Bluetooth connection name IGO Audio. Confirm the connection and your device is automatically pairing with the IGO Audio. A single “DU” tone voice will sound when pairing successfully, You do not need any pin-code for connection. IGO Audio is now connected and ready to play music from your device. ■ Turning on SURROUND mode 1 Turn on SURROUND mode by pressing • Replace the batteries with new ones. The unit can be operated with the buttons on the unit. • If you are still unable to operate the unit using the remote control even after trying the above possible solutions, the remote could be defective. Consult your dealer. Possible Solution / Other Check If: Dimensions (W × D × H) (Approx.) The volume level is set to minimum. Input indicator is flashing on the display panel. pressing VOL Speakers Left Cone type; Full Range (80 mm) 6 Ω Center Cone type; Full Range (80 mm) 6 Ω Right Cone type; Full Range (80 mm) 6 Ω Subwoofer For USA Model Power output and total harmonic distortion (FTC) Power output (Rated) Power output (Reference) Cone type; Subwoofer (80 mm) 3 Ω × 4 Front L + Front R: With 6 Ω loads, both channels driven, from 150-20,000 Hz; rated 20 W per channel minimum RMS power, with no more than 1 % total harmonic distortion from 250 mW to rate output. Front L / Front R: 20 W + 20 W (at 6 Ω, 1 kHz 1 % THD) Front L / Front R: 28 W (per channel at 6 Ω, 1 kHz) Center: 28 W (at 6 Ω, 1 kHz) Subwoofer 1/2: 27 W (per channel at 6 Ω, 100 Hz) Total Power: 138W Optical digital audio IN (TV/optical digital) Analog audio input jack S/PDIF (OPTICAL) Pin jack (200 mV [rms], 22 kΩ and above) Bluetooth Ver 3.0 (A2DP, aptX) Operating environment conditions Temperature: 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C); Relative humidity: 20 % to 80 % (no condensation) Supported Audio Decode Formats DIGITAL IN (OPTICAL): PCM 2ch (Sampling Frequency: less than 192 kHz) See “Supplied Accessories” Accessories • Muting is cancelled by pressing SRS and the symbol are trademarks of SRS Labs, Inc. SRS technology is incorporated under license from SRS Labs, Inc. (Muting can also be canceled by pressing VOL .) The equipment is not connected correctly. • Check the connections between the unit and equipment. If there is no connection problem, there could be a problem with the cable. Use another cable to connect the equipment and see if the problem is solved. The digital signal is not supported by the unit. • Check if the digital signal is supported by the unit. The Bluetooth word mark and logo are registered or owned by Bluetooth SIG, Inc, and any use of such marks by FORMOSA PROSONIC INDUSTRIES BERHAD is under license. Other trademarks and trade names are those of their respective owners. aptX word & logos marked with a TM or ® are trademarks registered or owned by CSR plc or one of its group companies and may be registered in one or more jurisdictions except that not all such marks aw registered in all countries where products are available. How to reset 1 Disconnect the power plug from the wall outlet. 980 mm × 380 mm × 99 mm 30.8 Ibs (14 kg) Possible Solution / Other • Increase the volume by mm Mass (Approx.) • This unit will automatically turn to standby mode if there is no signal from selected input within ten minutes. Possible Solution / Other 38½” × 15" × 4" 66 lbs (30 kg) Sound Check If: inch Maximum load • The information display will disappear if you do not press any operation button within five seconds. No sound output (General) 32 W / Standby mode: 0.5 W Power consumption Sudden Power off There is an input signal. AC 110V - 240V 50/60Hz AC power source The display disappears Should the problem persists, disconnect the power plug from the wall outlet and consult your dealer. Perform the following operation in the event that the unit cannot be operated using the control buttons on the remote control or the unit; or if the connected equipment is not recognized. IGO SOUND BASE SYSTEM Type Sound is interrupted or there is noise 2 Wait for more than 1 minute. 3 Connect the power plug to the wall outlet and turn on the power. Selecting the input source with the remote control Press the INPUT button for the desired source. Bluetooth Use this troubleshooting guide to check possible solutions for symptoms such as improper functioning of the unit. Resetting the unit in the event of freeze-up White To Analog Audio OUT Securely connect the unit and equipment. Crack sound from the cabinet. ■ A crack sound is heard when the cabinet expands and contracts due to changes in the room temperature. This is not an issue unless you experience a problem in the sound. BASS 1 (Low boost: Default) The input source changes in the following order: (Actual change of the input source may be slower than the display.) Do not place obstacles in the path between the remote control and remote sensor. Otherwise, the remote control may not work or will respond slowly. Display panel BASS 0 (Flat) Selecting the input source with the INPUT SELECTOR button on the front panel. Input sequence ■ These do not Constitute a Malfunction BASS level is displayed on the front display panel. the input source by pressing 1 Select button repeatedly. Avoid exposing the remote sensor to intense light. The remote control may not function under such a condition. The batteries of the remote control are empty. Polarity Check for any loose jacks or disconnected cables. Specifications Possible Solution / Other • Remove the obstacle. A button was pressed within the last five seconds. The mute mode is cancelled if you control the volume or turn the unit off/on. Selecting the input source • This unit will automatically turn to standby mode if there is no signal from selected input within ten minutes. Pin cable (not supplied) Signal To Optical Digital Audio OUT ■ Input indicator will flash. BASS level ■ INFO Pin cable (1 piece supplied, for connection to either TV or audio player) The optical digital audio input jack is covered. Just insert the plug into the covered jack after making sure it is pointing the correct way. * Connect to the Digital Audio IN (TV). Check if old batteries are being used. Check If: There is an obstacle in the path between the remote control and remote sensor. Check If: The standby indicator is OFF and the input indicator light is ON. Top of the cover Signal Check the polarity of the batteries inserted in the remote control. Select the desired BASS level by pressing button repeatedly. ■ Use two R03 or LR03 (size AAA) batteries. Pin cable (supplied) Red Contact an electrician in the event of loose outlet. You can select one of the four BASS levels. When the TV set does not have optical OUT, connect using a pin cable. White ■ Selecting BASS level during playback Inserting batteries into the remote control To Optical Digital Audio IN (DVD) TV The volume level can be controlled by pressing on the front panel. 1 Press Make sure that the standby indicator in standby mode. When using optical cable When the TV set has optical (audio digital) OUT, connect using an optical cable. ■ Insert the power plug into the wall outlet securely. Polarity TV Amplifier connections The volume level is displayed by five indicators on the front display panel. ■ Turning off the sound temporarily (Muting) Refer to TV connection Pin cable (supplied) ■ Check the power plug connection. Others Unable to operate the unit with the remote control AMP Output Power Connecting a TV and Player ■ Connecting the Power Cord Connecting the Video Player Input Terminal Installation ON ■ OFF Each time you press the surround mode changes as ON/OFF. SRS and the symbol are trademarks of SRS Labs, Inc. SRS technology is incorporated under license from SRS Labs, Inc. Operation The power does not turn on Check If: The power plug is disconnected. Check If: The sound is a digital sound not supported by the unit. Possible Solution / Other • Check if it is a digital sound supported by the unit. The sound is output from both the unit and the TV Possible Solution / Other • Connect the power plug to the wall outlet. Check If: Check TV volume level. Possible Solution / Other • Set TV volume to “0” or “mute”. ■ Design, specifications and software used are subject to change without prior notice for product improvement. ■ The material designation of major plastic parts of this product are indicated for recycling purpose. ■ Some exaggerations and omissions are made to the illustrations and monitor displays featured in these instructions to facilitate understanding. Actual items may vary from the illustrations.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2013:11:21 10:54:38+09:00 Creator : Adobe Illustrator CS3 Modify Date : 2013:11:21 11:03:39+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Title : IGo (MENU) 21.11.13 Creator Tool : Adobe Illustrator CS3 Metadata Date : 2013:11:21 11:03:39+08:00 Thumbnail Width : 256 Thumbnail Height : 112 Thumbnail Format : JPEG Thumbnail Image : (Binary data 14889 bytes, use -b option to extract) Document ID : uuid:EEC1B09B5352E311B505E871F299E3CC Instance ID : uuid:6a4138a1-ebad-4ae9-9f3b-da7f2b390582 Derived From Instance ID : uuid:1052650b-0efc-4cb2-a32e-387095575b05 Derived From Document ID : uuid:6120892493BFDB11914A8590D31508C8 Startup Profile : Print N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 750.000043 Max Page Size H : 320.000020 Max Page Size Unit : Millimeters Font Name : ArialMT, HelveticaNeue-BoldCond, Helvetica-Bold, MyriadPro-Regular, HelveticaNeue-Bold, HelveticaNeue-Roman Font Family : Arial, Helvetica Neue, Helvetica, Myriad Pro, Helvetica Neue, Helvetica Neue Font Face : Regular, 77 Bold Condensed, Bold, Regular, 75 Bold, 55 Roman Font Type : Open Type, Type 1, Type 1, Open Type, Type 1, Type 1 Font Version : Version 3.00, 001.000, 001.007, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, 001.101, 001.101 Font Composite : False, False, False, False, False, False Font File Name : ARIAL.TTF, HLBC____.PFB; HLBC____.PFM, HVB_____.PFB; HVB_____.PFM, MyriadPro-Regular.otf, HLB_____.PFB; HLB_____.PFM, HLR_____.PFB; HLR_____.PFM Plate Names : Black Swatch Groups Colorants Cyan : 77.999997 Swatch Groups Colorants Magenta : 4.000002 Swatch Groups Colorants Yellow : 11.000001 Swatch Groups Colorants Black : 0.000000 Swatch Groups Group Name : Grayscale Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: K=5 Swatch Groups Colorants Mode : GRAY Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Gray : 12 Producer : Adobe PDF library 8.00 Page Count : 2EXIF Metadata provided by EXIF.tools