Hanwha Asan 1 Plant DJO-AR-DEF Remote Control Unit User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3122051
Application ID	ksQqfW9nJE/eScepc6k10A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	72.35kB (904333 bits)
Date Submitted	2016-09-02 00:00:00
Date Available	2017-03-01 00:00:00
Creation Date	2016-07-26 02:04:36
Producing Software	Microsoft® Word 2010
Document Lastmod	2016-07-26 02:05:24
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	TECHM

Specification & Operation
Manual
(Remote Control Unit, Lever Control Unit,
Pedal Control Unit, Main Controller)
This document is property of Hanwha and disclosure, reproduction or duplication in whole or in
part is prohibited without its authorization. Use for the data contained in this document is
permitted only for manufacturing on Hanwha's behalf. In case of controversial interpretation of
the provisions herein contained, Hanwha shall guard legally its right.
1. Specification
1.1. Remote Control Unit
Device for controlling the lever & pedal remotely using wireless communication
No.
Description
Range
Dimension
298 x 144 x 212 mm
Weight
2.3 kg
Power
7.4 V
Power Supplier
Standard operating time
8 hours (continuous operation at 20℃)
Battery recharging time
2 hours
Operating Temperature
-20 ~ +55 ℃
Storage Temperature
-40 ~ +77 ℃
Operating Humidity
0 ~ 95%
10
Dustproof and Waterproof
IP65 Grade
- Ni-MH(Nickel-Metal hydride) Battery
- Battery 2ea (1 for operation / 1 for Spare)
1.2. Lever Control Unit
Device for controlling the excavator lever at operator's command using remote control
unit
No.
Description
Range
Dimension
125 x 200 x 85 mm
Weight
1.5 kg
Power
24 V
Power Supplier
Cigar jack (with Battery)
Operating Temperature
-20 ~ +55 ℃
Storage Temperature
-40 ~ +77 ℃
Operating Humidity
0 ~ 95%
Dustproof and Waterproof
IP54 Grade
1.3. Pedal Control Unit
Device for controlling the excavator pedal at operator's command using remote control
unit
No.
Description
Range
Dimension
135 x 140 x 110 mm
Weight
2.5 kg
Power
24 V
Power Supplier
Cigar jack (with Battery)
Operating Temperature
-20 ~ +55 ℃
Storage Temperature
-40 ~ +77 ℃
Operating Humidity
0 ~ 95%
Dustproof and Waterproof
IP54 Grade
1.4. Main Controller
Device for controlling the Lever & Pedal Control Unit at operator's command using
Remote Control Unit
No.
Description
Range
Dimension
125 x 250 x 100 mm
Power
24V
Power Supplier
Cigar jack (with Battery)
Operating Temperature
-20 ~ +55 ℃
Storage Temperature
-40 ~ +77 ℃
Operating Humidity
0 ~ 95%
Dustproof and Waterproof
IP54 Grade
2. Preparation
2.1. Parts
2.1.1. Lever Control Unit
No.
Name
Unit
No.
Name
Unit
Grip Fix Tilt
2EA
10
M3 x 8mm Bolt(Wrench)
4EA
Grip Fix 1
2EA
11
M2.5 x 6mm Bolt(Wrench)
4EA
Grip Fix 2
2EA
12
Motor Bush
4EA
Grip Fix 3
2EA
13
Spacer
4EA
Lever Wire Left
1EA
14
Shaft Fixer
2EA
Lever Wire Right
1EA
15
Clipper
8EA
Shaft Joint
23EA
16
Shaft
2EA
M4 x 8mm Bolt(Wrench)
10EA
17
Lever Adapter Rubber
2EA
M3 x 12mm Bolt(Wrench)
8EA
18
Lever Adapter
2EA
2.1.2. Pedal Control Unit
No.
Name
Unit
Pedal Connector(R)
1EA
Pedal Connector(L)
1EA
Roller
2EA
External Support
2EA
M10 Bolt
4EA
M10 Nut
4EA
M6 x Bolt(Wrench)
8EA
2.2. Tools
[ Box tool set ]
[ Wrench set ]
No.
Name
Unit
Box tool set
1SET
Wrench set
1SET
3. Installation
3.1. Level Control Unit
3.1.1. Lever Adapter Installation
Order
Figure
Note
Parts and Tool
- Put the adapter on the
adapter rubber of the
lever.
- Lever Adapter
- Do not pull powerfully
to split the rubber of the
lever rubber.
- When the Clippers are
inserted, Please check
- Clipper
that the clippers include
adapter, adapter rubber
and control stand.
- Wrench(M2.5)
3.1.2. Lever Neck Gripper Installation
Order
Figure
Note
Parts and Tool
- After take off the lever
flexible rubber, Insert the
- Grip Fix 3
Grip Fix 3 under the lever.
- Bolting after Insert the Grip
Fix 2 where the opposite
side of the Grip Fix 3.
- Please be sure that Grip
fix2 and Grip fix3 contacted.
- Grip Fix 2
- Bolts(M3 x 4)
- Wrench(M3)
- Grip Fix 1
- Put in the Grip Fix 1 in
front of the Grip Fix 2 and
- Bolts(M3 x 2)
Bolting
- Wrench(M3)
- Put the Grip Fix Tilt into
the hole of the Grip Fix 1.
- Grip Fix Tilt
- Do not confuse the side of
the Grip Fix Tilt.
- Bolts(M2.5 x 2)
- Do not tighten up the
- Wrench(M2.5)
screws cause you will tuning
this part.
- Connect the Shaft joint to
- Shaft Joint
Grip Fix Tilt.
- Screw(M4 x 1)
- Do not tighten up the
screw also this will be tuned.
- Wrench(M4)
3.1.3. Installation to Adapter
Order
Figure
Note
Parts and Tool
- Motor Bush
- Spacer
- To the rotating part of
the Motor, put the Motor
- Shaft
Bush, Spacer, Shaft and
Shaft Fixer sequentially.
- Shaft Fixer
- Fix the Shaft and Shaft
- Screws(M4
Fixer using the headless
Headless,M3
screws.
Headless)
- Wrench(M2,
M1.5)
- Attach the Lever control
Unit on the Adapter.
- Please sure that Shaft
should be connected and
pass through the Shaft
Joint.
- Please mate the Align
pin and the align hole of
the Adapter When you
connect the Lever Unit
and Adapter.
- Tighten the screws on
the 4points of the Lever
control Unit.
- Shaft Joint
- Lever Control
Unit with Shaft
- Screws(M4 x 2)
- Wrench(M4)
3.1.4. Horizontal Matching
Order
Figure
Note
Parts and Tool
- After Installation of the
Lever Control Unit, You
have the one more step
to operate machine well.
- You need to tuning the
some parts.
- Wrench(M2.5,
M4)
- First of all, tune the Grip
Fix Tilt until the Shaft
Joint positioning the half
position of the Shaft
when Lever is in neutral
position.
- Second, Make Parallel
between Lever shaft and
Robot Shaft for the
performance of the Lever
Control Robot.
3.2. Pedal Control Unit
3.2.1. Pedal Adapter Installation
Order
Figure
Note
Parts and Tool
- Take the Foot Rest off
the excavator.
- Wrench(M8)
- Install the Pedal
Adapter.
3.2.2. Pedal External Support Installation
Order
Figure
Note
Parts and Tool
- Assemble the Roller and
Pedal external support.
- Roller
- Take off the Pedal
Handle of the Pedal .
- External
Support
- Install the assembled
part the opposite position
of the pedal handle like
second photo.
- Box
Order
Figure
Note
Parts and Tool
- Match the Slide Link
and Roller attached on
the pedal.
- Wrench(M6)
- After match, lay the
- Screws(M6 x 4)
pedal control unit on the
adapter and bolting.
3.3. Wiring
Order
Figure
Note
Parts and Tool
- Put the Lever cable to the
lever control unit.
- Lever
- On the other side, of the
Cable(4Pin x 2)
Cable, connect to the main
controller.

- Same as the Lever unit,
- Pedal
- Pedal unit is connected
Cable(4Pin x 2)
with Main Controller.

- The communication box
is connected with main
- Communication
controller through 6pin
Cable(6pin)
cable.
- Key box
- In case of Key box,
connected with

communication box
Through 2pin cable.
cable(2pin)
Order
Figure
Note
Parts and Tool

- Power cable is two type
as you see the picture, first
- Cigar Jack
is Cigar jack and second is
Cable
2pin power cable.
- Power
- Cigar jack will be
connected with Excavator.
- 2Pin power cable will be
connected with main
controller and battery.
Cable(2Pin)
4. Operation
After Level/Pedal Control Unit is finished the installation, excavator lever and pedal can
be operated by using Remote Control Unit. Joysticks of Remote Control Unit to control
excavator level/pedal are configured as follows.
4.1. Lever Control Unit
Motion
Left Lever Control Unit forward
Note
Push the left lever joystick to forward(↑). Then left lever
direction operation
control unit operate the excavator left lever to forward(↑).
Left Lever Control Unit
Push the left lever joystick to backward(↓). Then left lever
backward direction operation
Left Lever Control Unit left
direction operation
control unit operate the excavator left lever to backward(↓).
Push the left lever joystick to left side(←). Then left lever
control unit operate the excavator left lever to left side(←).
Left Lever Control Unit right
Push the left lever joystick to right side(→). Then left lever
direction operation
control unit operate the excavator left lever to right side(→).
Right Lever Control Unit
Push the right lever joystick to forward(↑). Then right lever
forward direction operation
control unit operate the excavator right lever to forward(↑).
Right Lever Control Unit
backward direction operation
Push the right lever joystick to backward(↓). Then right lever
control unit operate the excavator right lever to
backward(↓).
Right Lever Control Unit left
Push the right lever joystick to left side(←). Then right lever
direction operation
control unit operate the excavator right lever to left side(←).
Right Lever Control Unit right
Push the right lever joystick to right side(→). Then right lever
direction operation
control unit operate the excavator right lever to right side(→).
4.2. Pedal Control Unit
Motion
Left Pedal Control Unit forward
direction operation
Left Pedal Control Unit
backward direction operation
Right Pedal Control Unit forward
direction operation
Right Pedal Control Unit
backward direction operation
Note
Push the left pedal joystick to forward(↑). Then left pedal
control unit operate the excavator left pedal to forward(↑).
Push the left pedal joystick to backward(↓). Then left pedal
control unit operate the excavator left pedal to
backward(↓).
Push the right pedal joystick to forward(↑). Then right
pedal control unit operate the excavator right pedal to
forward(↑).
Push the right pedal joystick to backward(↓). Then right
pedal control unit operate the excavator right pedal to
backward(↓).
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to the
following two conditions :
(1) This Device may not cause harmful interface, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for CLASS B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try
correct the interference by one or more of the following measures:
1.1. Reorient or relocate the receiving antenna.
1.2. Increase the separation between the equipment and receiver.
1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is
connected.
1.4. Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
“CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human
contact during normal operation. The antenna should not be contacted during operation
to avoid the possibility of exceeding the FCC radio frequency exposure limit.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : ko-KR
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : TECHM
Create Date                     : 2016:07:26 02:04:36+09:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2016:07:26 02:05:24+09:00
Metadata Date                   : 2016:07:26 02:05:24+09:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:44d0918f-6233-43c9-a3a6-46e5696b2001
Instance ID                     : uuid:5534cbf3-28a7-444e-99d5-63c5f25e4c05
Page Count                      : 17
Author                          : TECHM

EXIF Metadata provided by EXIF.tools