Hanwha Techwin DIGIMAXI50MP3 Digital Camera Including MP3 Play Function User Manual

Samsung Techwin Co Ltd Digital Camera Including MP3 Play Function Users Manual

Contents

Users Manual 1 of 2

ENGLISHUser’s ManualThank you for buying a Samsung Camera.This manual will guide you through using the camera, including capturing images,downloading images and using the application software. Please read this manual carefully before using your new camera.
ŝ2ŞInstructionsƈUse this camera in the following orderInsert the USB cableSet up the camera driverBefore connecting the camera to a PC, via the USBcable, you will need to set up the camera driver.Install the camera driver that is contained inApplication software CD-ROM. (p.117)Take a picture. (p.24)Insert the supplied USB cable into the PC’s USBport and the camera’s USB connection terminal.(p.127)Check the camera’s power. If the power is turned off,press the camera button to turn it on. (p.31)Take a pictureCheck the camera’s powerCheck [Removable Disk]Open WindowŖs EXPLORER and search for[Removable Disk]. (p.128)ƃIf you use a card reader to copy the images on the memory card to your PC, the imagescould be damaged. When transferring the images taken with the camera to your PC, be sureto use the supplied USB cable to connect the camera to your PC. Please note that themanufacturer holds no responsibility for loss or damage of images on the memory card dueto the use of a card reader.
ŝ3ŞContentsREADYƃGetting to know your camera 5ƃDanger/ Warning 6ƃCaution/ An FCC warning 7ƃSystem chart 8ƃIdentification of features 10ƃCradle 11ƃConnecting to a Power Source 13ƈUsing the SAC-41 14ƈHow to charge the rechargeable battery(SLB-0737) with the SAC-41 14ƈImportant information about battery (SLB-0737) charging with the SAC-41 15ƈUsing the battery/ Removing the battery 17ƃInstructions on how to use the memory card18ƃInserting the memory card 20ƃRemoving the memory card 20ƃWhen Using the Camera for the First Time21ƃLCD monitor indicator 22ƃChanging the recording mode 23ƃStarting the recording mode 25ƈHow to use the Auto mode 25ƈHow to use the Movie clip mode 25ƈRecording the movie clip without voice 26ƈPausing while recording a movie clip(Successive Recording) 26ƈHow to use the Manual mode 26ƈHow to use the Scene modes 27ƈHow to use the VOICE RECORDING mode28ƈHow to use the SF mode 28ƃThings to Watch Out for When Taking Pictures29ƃUsing the camera buttons to adjust the camera30ƃPOWER button/ SHUTTER button 30ƃZOOM W/ T button 30ƃVoice memo/ UP button 32ƃMacro/ Down button 33ƃFocus lock 35ƃFlash / Left button 36ƃSelf-timer/ Right button/ 38ƃMENU/ OK button 39ƃM (Mode) button 39ƃSF button 41ƃ+/- button 42ƃUsing the LCD monitor to adjust the camera settings 46ƃHow to use the menu/ Mode 48ƃMode Set 49ƃSize 50ƃQuality/ Frame rate 51ƃMetering/ Continuous shot 52ƃSharpness 53ƃOSD(On Screen Display) information 53ƃEffect 54ƃSpecial Effect 55ƃSpecial Effect : Preset focus frames 56ƃSpecial Effect : Composite shooting 57ƃSpecial Effect : Photo Frame 59ƃMovie Clip frame stabiliser 60ƃStarting play mode 61ƈPlaying back a still image 61ƈPlaying back a movie clip 62ƈHow to capture the movie clip 62ƈOn camera movie trimming 63ƈPlaying back a recorded voice 64ƃLCD monitor indicator 65ƃUsing the camera buttons to adjust the camera66ƃPlay mode button 66ƃThumbnail/ Enlargement button/ Volume button67ƃVoice memo/ Up button 69RECORDINGPLAY
ŝ4ŞContentsƃPlay & Pause/ Down button 70ƃDelete button 70ƃLeft/ Right/ Menu/ OK button 71ƃAlbum button 72ƃSetting up the play back function using theLCD monitor 75ƃStarting the slide show 78ƃProtecting images 80ƃDeleting images 81ƃResize 82ƃEffect 83ƃRotating an image/ DPOF 84ƃCopy To Card 87ƃOSD Information 88ƃPictBridge 89ƃSetup menu 94ƃFile name 95ƃAuto power off 96ƃLanguage 97ƃFormatting a memory card 97ƃSetting up the Date/ Time/ Date type 98ƃImprinting the recording date 98ƃSound 99ƃConnecting an External Device (USB) 99ƃAuto Focus lamp/ LCD brightness 100ƃSelecting Video out type 101ƃQuick view/ Initialisation 103ƃSetting up the Mycam menu 104ƃStart up image 104ƃStart up sound/ Shutter sound 105ƃMP3 mode 106ƃStarting the MP3 mode 107ƃLCD monitor indicator of the MP3 mode 109ƃUsing the camera buttons to adjust thecamera 110ƃList button 110ƃLock button 111ƃVolume button 112ƃControl button 112ƃDelete button 112ƃSetting up the play back function using theLCD monitor 113ƃPlay modeōōōōōōōōōōōōōƃDelete allōōōōōōōōōōōōōƃSlide ShowōōōōōōōōōōōōƃImportant notes 115ƃWarning indicator 117ƃBefore contacting a service centre 118ƃSpecifications 121ƃ༜ጕኤၢ࿴ေ ໓၏໽඿໷စ ౅ጥჶႉ໓ጫōōōōōōōōōōōōōōƃଇႧ ཫརታ ໓࿭ōōōōōōōōōōƃ༜ጕኤၢ࿴ ࿎ஷ ōōōōōōōōōōƃ༜ጕኤၢ࿴ ໽ᇛ "?QV! ;-໓၏ႜ၏ōƃ༜ጕኤၢ࿴ ໽ᇛ "?QV5-@8໓၏ႜ၏ōōōōōōōōōōōōōō!ƃᇾጏብ တૃ ෂಝႉ ཫႝ ōōōōōōƃ?QVLW_[! ;-၏ ᇥධഉ ಝഉႎฦ ჆ધōƃႎ౷ཬ ನརቁႉ ።၏ōōōōōōōō!ƃႎ౷ཬ ನརቁႉ ჆ધōōōōōōōōƃ5IKQV\W[Pစ ᇥධഉ တૃጣଢ ōōōōƃ5IKQV\W[P၏ ႎ౷ཬ ನརቁ ໓၏ถอōƃ,QOQUI`5I[\MZႉ ።၏ ōōōōōōōƃ,QOQUI`:MILMZႉ ።၏ ōōōōōōō ƃQ0]Jႉ ።၏ōōōōōōōōōōōōƃ.)9 ōōōōōōōōōōōōōōōōMP3 MODESOFTWARESETUP
ŝ5ŞGetting to know your cameraThank you for buying a Samsung Digital Camera.ƃPrior to using this camera, please read the user manual thoroughly.ƃWhen you require After Sales service, please bring the camera and the cause of the cameramalfunction (such as battery, Memory card etc.) to the A/S centre.ƃPlease check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes noresponsibility for any loss or damages that may result from camera malfunction.ƃKeep the manual in a safe place.ҬMicrosoft, Windows and Windows logo are registered trademarks of Microsoft Corporationincorporated in the United States and/or other countries.ҬAll brand and product names appearing in this manual are registered trademarks of theirrespective companies.DANGERDANGER indicates an imminently hazardous situation which, if not avoided,will result in death or serious injury.WARNINGWARNING indicates a potentially hazardous situation, which, if not avoided,could result in death or serious injury.CAUTIONCAUTION indicates a potentially hazardous situation, which, if not avoided,may result in a minor or moderate injury.Correct Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separatecollection systems) This marking shown on the product or its literature, indicates thatit should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolledwaste disposal, please separate this from other types of wastes and recycle it responsibly topromote the sustainable reuse of material resources. Household users should contact either theretailer where they purchased this product, or their local government office, for details of whereand how they can take this item for environmentally safe recycling. Business users shouldcontact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.This manual contains instructions on using this camera that will help you to use thiscamera safely and correctly. This will help prevent danger and injury to others.
ŝ6ŞDangerƈDo not attempt to modify this camera in any way. This may result in fire, injury, electric shockor severe damage to you or your camera. Internal inspection, maintenance and repairsshould be carried out by your dealer or Samsung Camera Service centre.ƈPlease do not use this product in close proximity to flammable or explosive gases, as thiscould increase the risk of explosion.ƈShould any form of liquid or a foreign object enter the camera, do not use it. Switch off thecamera, and then disconnect the power source. You must contact your dealer or SamsungCamera Service centre. Do not continue to use the camera as this may cause a fire orelectric shock.ƈDo not insert or drop metallic or inflammable foreign objects into the camera through accesspoints e.g. the memory card slot and battery chamber. This may cause a fire or electricshock.ƈDo not operate this camera with wet hands. This could pose a risk of electric shock.ƈDo not use the flash in close proximity to people or animals. Positioning the flash too close toyour subject’s eyes, may cause eyesight damage.ƈFor safety reasons keep this product and accessories out of reach of children or animals toprevent accidents e.g.:ҮSwallowing battery or small camera accessories. If an accident should occur, pleaseconsult a doctor immediately.ҮThere is the possibility of injury from the camera’s moving parts.ƈbattery and camera may become hot during prolonged use and it may result in cameramalfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow ittime to cool.ƈDo not leave this camera in places subject to extremely high temperatures, such as a sealedvehicle, direct sunlight or other places of extreme variances in temperature. Exposure toextreme temperatures may adversely affect the camera’s internal components and couldcause a fire.ƈWhen in use, do not cover the camera or AC Charger. This may cause heat to build up anddistort the camera body or cause a fire. Always use the camera and its accessories in a well-ventilated area.Warning
ŝ7ŞCautionƈLeaking, overheating, or burst battery could result in fire or injury.ҮUse battery with the correct specification for the camera.ҮDo not short circuit, heat or dispose of battery in fire.ҮDo not insert the battery with the reverse polarities. ƈRemove the battery when not planning to use the camera for a long period of time. Battery may leak corrosive electrolyte and permanently damage the camera’s components.ƈDo not fire the flash while it is in contact with hands or objects. Do not touch the flash afterusing it continuously. It may cause burns.ƈDo not move the camera while it is switched on, if you are using the AC Charger. After use, always switch off the camera before unplugging the cable from the wall socket.Then make sure that any connector cords or cables to other devices are disconnected beforemoving the camera. Failure to do so may damage the cords or cables and cause a fire orelectric shock.ƈTake care not to touch the lens and where the lens cover is to avoid taking an unclear imageand possibly causing camera malfunction.ƈAvoid obstructing the lens or the flash when you capture an image.An FCC warningҮThis device has been tested in accordance with the limits of a class B digital deviceunder item 15 of the FCC rules. These limits are designed to provide protectionagainst harmful interference in commercial installation. This equipment generates,absorbs and can emit radio frequency energy. If it is not installed and used inaccordance with the instructions, it may cause harmful interference to radiocommunication. There is however, no guarantee that interference will not occur insome situations. Should any interference occur when this device is in operation,please try one or more of the following measures. ƈChange the location and direction of any aerial.ƈIncrease distance between the camera and the affected device.ƈUse a different socket away from the affected device.ƈPlease contact a Samsung agent or a radio/TV engineer.ҮThis device complies with part 15 of the FCC Rules.ҮChanges or modifications not expressly approved by the party responsible forcompliance could void the users authority to operate the equipment.
ŝ8ŞSystem chartPlease check that you have the correct contents before using this product. The contents canvary depending on the sales region. To buy the optional equipment, contact your nearestSamsung dealer or Samsung service centre.Software CD (see p.115, 116)Camera strapUser manual, Product warrantyPouchSD memory card/MMC(see p.19)DPOF compatibleprinter (see p.85)Rechargeable battery(SLB-0737)Cradle SAC-41AC cordſThe charger (SBC-L5), AC charger (SAC-41) or Cradle is optional depending on the sales region.< Included items >
ŝ9ŞSystem chartPictBridge compatibleprinter(see p.89)Computer External monitor Yellow colour - VideoWhite colour - Voice(see p.101)For WindowsҮWindows 98/ 98SE/ 2000/ ME/ XPҮPC with processor better than Pentium II450MHz (Pentium 700MHz or better isrecommended)Ү200MB of available hard-disk space (Over 1GB is recommended)ҮMinimum 64MB RAM (XP : 128MB)Ү1024x768 pixels, 16-bit colour displaycompatible monitor (24-bit colour displayrecommended)ҮDirectX 9.0 or laterҮUSB portҮCD-ROM driveFor MacintoshҮPower Mac G3 or laterҮMac OS 9.2 ~ 10.3ҮMinimum 64MB RAMҮ110MB of available hard-disk spaceҮUSB portҮCD-ROM driveSystem RequirementsWhen you connect the camera to acomputer, printer or external monitor, youhave to use the USB/ AV cable suppliedwith the camera, or the external devicescan't recognise the camera.CAUTIONEarphonesUSB cable forrecharging the batteryUSB cable AV cable
ŝ10ŞIdentification of featuresFront & TopBack & BottomſTake care not to press the lens, lens cover and camera by force. This may cause the cameramalfunction.Power buttonFlashOptical 3X zoom lens/Lens coverSF mode button/Lock buttonSpeakerMicrophoneShutter buttonSelf-timer lamp/Auto Focus lampLCD monitorM(Mode/Album) buttonPlay mode buttonEarphones JackZoom T button(Digital zoom, Vol. Up)5 function button+/-, DELETE buttonDC/USB/AV connection terminalCradle connectorCamera statuslampZoom W button(Thumbnail, Vol. Down)Strap eyelet
ŝ11ŞIdentification of featuresƈYou can recharge your rechargeable battery, transfer a captured image to print, anddownload images with the cradle. (Refer to page 14, 89 and 127)FLASH/LEFT buttonMENU/ OKbuttonMacro/ DOWN buttonPlay & Pause buttonSELF-TIMER/RIGHT buttonVoice memo/ UP buttonBottom / 5-function buttonCradleBattery holderMemory card slotBattery chamberBattery chamber coverƃBackƃTopCameraconnectionterminalUSB portAV connectionterminalDC connectionterminal
ŝ12ŞIdentification of featuresƈMode icon : Refer to page 40, 41 for more information about the camera mode setting. ƈSelf-timer lampIcon Status DescriptionBlinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals.For the first 8 seconds, the lamp blinks at 1 second intervals.For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals.A picture will be taken after about 10 seconds and 2 seconds later asecond picture will be taken.ƈCamera Status LampStatus DescriptionThe lamp turns on and off when the camera is ready totake a pictureThe lamp blinks while saving the image data and turnsoff when the camera is ready to take a pictureThe lamp lights up (LCD monitor turns off after initializingthe device)Transmitting Data with a PC The lamp blinks (LCD monitor turns off)When the printer is printing The lamp blinksBlinkingBlinkingPower onAfter taking a pictureWhen the USB cable is inserted toa PCWhen the USB cable is inserted toa printer The lamp lights upMODEVOICE RECORDINGMP3MOVIE CLIPAUTO MANUAL SF PLAYIconNIGHT PORTRAIT CHILDRENLANDSCAPECLOSE UP TEXTIconMODE SUNSET DAWN BACKLIGHTFIREWORKSBEACH&SNOW-Icon -MODESCENE
ŝ13ŞConnecting to a Power SourceImportant information about battery usageƃWhen the camera is not used, turn off the camera power.ƃPlease remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera.ƃLow temperatures (below 0˚C) can affect the performance of the battery and you mayexperience reduced battery life.ƃBattery will usually recover at normal temperatures.ƃDuring extended use of the camera, the camera body may become warm. This is perfectly normal.INFORMATIONƈYou should use the rechargeable battery (SLB-0737) supplied with the camera. Be sure to charge the battery before using the camera. ƈSLB-0737 rechargeable battery Specification ƈNumber of images and battery lifeſThese figures are measured under Samsung’s standard conditions and Shooting conditionsand may vary depending on the way of user’s usage. Model SLB-0737Type Lithium IonCapacity 760mAhVoltage 3.7VCharging time Approx. 150 MIN (Using the SAC-41)Still image Movie MP3Battery life Number of images Recording time Playing timeApprox. 75 MIN Approx. 150 Approx.65 MIN About 240 min.Using the fully charged batteryAuto mode, 5M image size Fine image quality,Shot to shot interval : 30Sec. Changing the zoom positionbetween the Wide and the Teleends every 1 shot. Using the flash every two times.Based onthefollowingshootingconditionsUsing the fullycharged battery640X480 image size30fps frame rateUsing the fullycharged batteryLCD Off.
ŝ14ŞConnecting to a Power SourceIf you have access to a mains supply, using an SAC-41 allows the camera to be used for longperiods of time.Plug the SAC-41 into the DC connection terminal on the camera or cradle.Before turning on the camera power with an SAC-41, insert the rechargeable battery that wascharged for over 10 minutes with turning off the camera. ƃCharging with the cradle1. Insert the rechargeable battery into the batterychamber.ƈHow to charge the rechargeable battery (SLB-0737) with the SAC-41.Using the SAC-41ƃAlways turn off the power before taking the SAC-41 out of the mains supply.ƃAs with all mains powered devices, safety is important. Ensure that neither the cameranor Charger comes into contact with water or metallic materials.ƃPlease ensure that you use the SAC-41 with the correct specification for the camera.Failure to do so may affect your warranty.DANGER2. Place the camera correctly in thecradle. 3. Put the SAC-41 into your power socketand DC connection terminal of the cradle.Charging LED
ŝ15ŞConnecting to a Power SourceſIf you connect the SAC-41 to camera without inserting the rechargeable battery, the chargingLED will brink or be off. In this case, insert the battery and connect the SAC-41 again. ƈImportant information about battery (SLB-0737) charging with the SAC-41ƃIf the charging LED of the SAC-41 does notturn on or blink after inserting the rechargeablebattery, please check whether the battery areinserted correctly.ƃPlease check the battery charging status withthe charging LED of SAC-41.Charging LEDCharging LEDƃCharging with the camera1. Insert the rechargeable battery into the batterychamber.2. Put the SAC-41 into your power socket andDC connection terminal of the camera.ƈHow to charge the rechargeable battery (SLB-0737) with the SAC-41.
ŝ16ŞConnecting to a Power SourceƈCharging LED of the SAC-41Status Using the cradle Direct to the cameraBeing Charged Red LED is on Red LED is onCharging is complete Green LED is on Green LED is onCharging error Red LED is off or blinking Red LED is off or blinkingƃIf there is a charging error, please check all the power connections are in place.ƃA USB cable for transmitting data can’t be used for charging the rechargeable battery. ƈCharging time (When the camera is turned off)- Using the cradle : About 150MIN- Using the SAC-41 : About 150MINImportant information about the rechargeable battery.ƃIf you charge the battery with the camera power on, the battery can't charge fully. To charge the battery fully, turn the camera off when you charge it. ƃIf you insert the fully discharged battery to charge it, do not turn on the camera at thesame time. The camera may not be turned on because of the low battery capacity.Charge the battery for over 10 minutes to use the camera. ƃDo not use the flash frequently or take a movie clip with the fully discharged batterycharged for a short time. Even if the charger is inserted, the camera power may be turnedoff because the rechargeable battery is discharged again.INFORMATION
ŝ17ŞConnecting to a Power SourceUsing the battery : If the camera does not turn on after you have inserted battery, pleasecheck whether the battery are inserted with the correct polarity(+/-).2. Insert the battery taking note of the polarity (+ / -).3. To close the battery chamber cover, push ituntil it clicks.Removing the battery1. Turn off the camera power. Open the battery chamber cover and move thebattery holder aside. The battery will be released.2. Take out the battery and close the batterychamber cover.ƈThere are 4 indicators for battery condition that are displayed on the LCD monitor.1. Open the battery chamber cover by pushing inthe direction of the arrow.ƃWhen the battery chamber cover is opened, do not press the battery chamber cover byforce. This may cause the battery chamber cover modification or breakage. INFORMATION Battery statusBattery indicatorThe battery is fullycharged Prepare new batteryThere is no battery capacity.Replace with new battery.
ŝ18ŞInstructions on how to use the memory cardƃBe sure to format the memory card (see p.97) if you are using a newly purchased memory forthe first time, if it contains data that the camera cannot recognise, or if it contains imagescaptured with a different camera.ƃTurn off the camera power whenever the memory card is being inserted or removed.ƃRepeated use of the memory card will eventually reduce the memory card’s performance.Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty.ƃThe memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact.ƃDo not store the memory card in an environment with strong electronic or magnetic fields,e.g. near loud speakers or TV receivers.ƃPlease do not use or store in an environment where there are extremes in temperature.ƃDo not allow the memory card to become dirty or to come into contact with any liquid. Should this happen, clean the memory card with a soft cloth.ƃPlease keep the memory card in its case when not in use.ƃDuring and after periods of extended use, you may notice that the memory card is warm. This is perfectly normal.ƃDo not use a memory card that is used in another digital camera.To use the memory card in this camera, format the memory card using this camera. ƃDo not use a memory card formatted by another digital camera or memory card reader.ƃIf the memory card is subjected to any of the following, the recorded data may becomecorrupted :- When the memory card is used incorrectly.- If the power is switched off or the memory card is removed while recording, deleting(formatting) or reading.ƃSamsung cannot be held responsible for lost data.ƃIt is advisable to copy important data onto other media as back-up e.g. floppy disks, harddisks, CD etc.ƃIf there is insufficient memory available : A [Card Full!] message will appear and the camera will not operate. To optimise the amountof memory in the camera, replace the memory card or delete unnecessary images storedon the memory.
ŝ19ŞInstructions on how to use the memory cardƃDon't remove the memory card when the camera status lamp is blinking as this maycause damage to data in the memory card.INFORMATION[ SD (Secure Digital) memory card ]WriteprotectswitchLabelCard pinsƈThe camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult theenclosed manual for using the MMC Cards.The SD memory card has a write protect switchthat prevents image files from being deleted orformatted. By sliding the switch to the bottom ofthe SD memory card, the data will be protected.By sliding the switch to the top of the SDmemory card, the data protection will becancelled. Slide the switch to the top of the SD memorycard before taking a picture.ƈWhen using a 32MB memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such assubject matter.ſThe zoom buttons are not pressed during the movie clip recording. The recording times can be changed by the zoom operation. Recorded image size S. Fine Fine Normal30FPS 15FPS5M(2592x1944) 11 21 32 - -4M(2272x1704) 14 27 40 - -3M(2048x1536) 17 33 49 - -2M(1600x1200) 28 52 75 - -1M(1024x768) 66 111 151 - -VGA(640x480) 149 217 275 - -640(640X480) - - -About 2MIN About 4MIN320(320X240) - - -About 4MIN About 7MIN160(160X128) - - -About 8MIN About 15MINStillimage* Movieclip
ŝ20ŞInserting the memory card3. To close, push the battery chamber cover until you heara click. If the memory card does not slide in smoothly,do not attempt to insert it by force. Check the directionof insertion, and then insert it correctly. Do not insert thememory card the wrong way round. Doing so maydamage the memory card slot.1. Turn the power off using the power button.Open the battery chamber cover and press thememory card as shown in the image and release.2. Remove the memory card and close the batterychamber cover.2. Have the front of the memory card facing toward the frontof the camera (lens) and the card pins toward the back ofthe camera (LCD monitor), and then push the memorycard into the card slot until you hear a click.1. Turn off the camera’s power and pull the battery chambercover in the direction of the arrow to open.Removing the memory cardƃWhen the camera is turned on, inserting or removing the memory card turns the camerapower off.INFORMATION
ŝ21ŞWhen Using the Camera for the First TimeƈCharge the rechargeable battery fully before using the camera for the first time. ƈWhen the camera is turned on for the first time, a menu will be displayed to set date, time andlanguage in the LCD monitor. This menu will not be displayed after setting up the date, timeand language. Set up the date, time and language before using this camera. ƃSetting up the date, time and date type1. Select the [Date&Time] menu by pressing the UP/DOWNbutton and press the RIGHT button.2. Select the desired sub menu by pressing the UP/ DOWN/LEFT/ RIGHT button.RIGHT button : selects YEAR/ MONTH/ DAY/ HOUR/ MINUTE/DATE TYPELEFT button : Moves the cursor to the [Date&Time]main menu if the cursor is at the first item of the date and time setup.In all other instances, the cursor will be shifted to the left of its currentposition.UP/ DOWN button : changes the value of each item.ƃYou can select 21 languages. These are listed below : English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese, Japanese,Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai, BAHASA(MALAY/ INDONESIAN), Arabic, Hungarian, Czech and Polish. ƃEven if the camera is restarted, the language setting will be maintained.INFORMATIONƃSetting up the language1. Select the [Language] menu by pressing the UP/DOWNbutton and press the RIGHT button.2. Select the desired sub menu by pressing the UP/ DOWNbutton and press the OK button. When the settings are complete, press the MENU buttontwice to exit the menu screen.Date&TimeLanguageSetupBack:ȜSet:OKƊ05/05/01 13:01ƌyy/mm/ddDate&TimeLanguage ENGLISHጥૹ࿴FRANÇAISDEUTSCHESPAÑOLSetupBack:ȜSet:OK
ŝ22ŞLCD monitor indicatorƈThe LCD monitor displays information about the shooting functions and selections.[Image & Full Status]No. Description Icons Page2Battery p.183Continuous shot p.534Flash p.375Self-timer p.396 Macro p.357 Metering p.538 Card inserted indicator -9 Auto focus frame -10 Camera shake warning p.3011 Date/ Time 2005/05/01 01:00 PM p.9812 Exposure compensation p.4513 White Balance p.4414 ISO p.44Recording mode1p.50ڹںڻڼڽھڿۀۅۄۆۇ؆؅؇؈ۂہ ۃ؊؉
ŝ23ŞLCD monitor indicatorChanging the recording modeƈSelecting the [Mode] menu1. Insert the battery (p.18). 2. Insert the memory card (p.21). As this camera has a 50MB internal memory, you do notneed to insert the memory card. If the memory card is not inserted, an image will be storedin the internal memory. If the memory card is inserted, an image will be stored on thememory card.3. Close the battery chamber cover.4. Press the power button to turn on the camera.5. Press the menu button and a menu will display. 6. Use the UP/DOWN button to select the [Mode] menu. 7. Select [Still/ Movie/ MP3] or [Full] sub menu by pressingthe UP/ DOWN button. - [Still/ Movie/ MP3]: A still image mode that was selectedon the [Mode set] menu and movie clip mode can be selected. Refer to page 50 for more information about using the [Mode set]menu. - [Full] : Auto, Manual, Movie clip and scene modes can be selected.8. Press the MENU button and the menu will disappear. ƈYou can select the desired working mode by the M (Mode) button located on the back of thecamera and [Mode], [Mode set] menu. Auto, manual, movie clip, scene (night, portrait,children, landscape, text recognition, close-up, sunset, dawn, backlight, fireworks, beach & snow) camera modes are available. 15 RGB RGB p.4316 Sharpness p.5417 Image quality p.52Number of available shots remaining 38Remaining time (Movie clip/ Voice recording)00:01:30/ 01:00:0020 Voice memo/ Mic. off p.34/271918p.51p.20Image sizeOptical/ Digital Zoom bar/ Digital Zoom rate21 p.32Still & MovieFullMode
ŝ24ŞChanging the recording modeƃChanging the recording mode : If the [Still/ Movie/ MP3] menu was selectedSteps from 1-4 are the same as those for selecting the [Mode] menu. 5. A recording mode used just before will display.6. Press the M (Mode) button located on the back of the camera and the recording mode willchange to the movie clip mode. 7. Press the M (Mode) button twice and a still image mode selected on the [Mode set] menuwill be selected. ƃChanging the recording mode : If the [Full] menu was selectedSteps from 1-4 are the same as those for selecting the [Mode] menu. 5. A recording mode used just before will display.6. Press the M (Mode) button located on the back of the camera and the mode selectionmenu will display. 7. To select the Auto, Manual, Movie clip or Scene modes, press the Left/Right button. To move between the Auto, Manual, Movie clip menu line and Scene menu line, press theUp/Down button. 8. Press the M (Mode) button and the mode selection menu will disappear.Pressing the M (Mode) button twice[AUTO mode] [MOVIE CLIP mode]Pressing the Up buttonNight[Selecting the Scene mode]Pressing the Left button[Mode selection menu]AUTOSet : OK/MMovie[Selecting the Movie clip mode]Set : OK/MSet : OK/M
ŝ25ŞStarting the recording modeƈHow to use the Auto modeUse this for shooting basic still images. 1. Select the [Full] sub menu on the [Mode] menu (p.24). 2. Select the Auto mode by pressing the M (Mode) button(p.25).3. Point the camera towards the subject and compose theimage by using the LCD monitor.4. Press the shutter button to capture an image.ƈHow to use the Movie clip modeA movie clip can be recorded for as long as the available recording time of the memorycapacity allows. 1. Select the [Full] sub menu on the [Mode] menu (p.24). 2. Select the Movie clip mode by pressing the M (Mode)button (p.25).3. Point the camera towards the subject and compose theimage by using the LCD monitor.4. Press the shutter button once and movie clips arerecorded for as long as the available recording timeallows. Movie clips will still be recorded if the shutterbutton is released. If you wish to stop recording, press the shutter button again.ſImage size and type are listed below.- Image size : 640X480, 320X240, 160X128 (user selectable)- Movie clip file type : AVI (MPEG-4)ƃIf the auto focus frame turns to red when you press the shutter button down half way, itmeans that the camera cannot focus on the subject. Should this be the case, the camerais less likely to capture an image clearly.ƃAvoid obstructing the lens or the flash when you capture an image.INFORMATION[AUTO mode][MOVIE CLIP mode]
ŝ26ŞStarting the recording modeƈHow to use the Manual modeSelecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed.1. Select the [Full] sub menu on the [Mode] menu (p.24). 2. Select the Manual mode by pressing the M (Mode) button(p.25).3. Point the camera towards the subject and compose theimage by using the LCD monitor.4. Press the shutter button to capture an image.ƈPausing while recording a movie clip (Successive Recording)This camera allows you to temporarily stop during unwanted scenes, while recording a movieclip. Using this function, you can record your favourite scenes into a movie clip without havingto create multiple movie clips.ƃUsing Successive RecordingSteps from 1-2 are the same as those for MOVIE CLIPmode.3. Point the camera towards the subject and compose theimage by using the LCD monitor. Press the shutterbutton and movie clips are recorded for as long as theavailable recording time. Movie clips will still be recordedif the shutter button is released.4. Press the Pause button( ) to pause recording.5. Press the Pause button( ) again to resume the recording.6. If you wish to stop recording, press the shutter button again.ƈRecording the movie clip without voiceYou can record the movie clip without voice. Steps from 1-3 are the same as those for MOVIE CLIPmode. 4. Press the Up button and the ( ) icon will display onthe LCD monitor. 5. Press the shutter button and movie clip is recorded foras long as the available recording time without voice. 6. To stop the recording, press the shutter button again. [MANUAL mode][Successive recording of a movie clip]
ŝ27ŞStarting the recording modeƈHow to use the Scene modesUse the menu to easily configure optimal settings for a variety of shooting situations.1. Select the [Full] sub menu on the [Mode] menu (p.24). 2. Select the Scene mode by pressing the M (Mode) button(p.25).3. Point the camera towards the subject and compose theimage by using the LCD monitor.4. Press the shutter button to capture an image.ſThe scene modes are listed below.[Night]( ) : Use this for shooting still images at night or in other darkconditions.[Portrait]( ) : To take a picture of a person.[Children]( ) : To take a picture of fast moving objects, for example, children.[Landscape]( ) : To take pictures of distant scenery.[Close up]( ) : Close-up shooting for small objects such as plants and insects.[Text]( ) : Use this mode to shoot a document.[Sunset]( ) : For taking pictures of sunsets.[Dawn]( ) : Daybreak scenes.[Backlight]( ) : Portrait without shadows caused by backlight.[Firework]( ) : Firework scenes.[Beach & Snow]( ) : For ocean, lake, beach and snowscape scenes.[SCENE mode]
ŝ28ŞStarting the recording modeƃA distance of 40cm between you and the camera (microphone) is the best distance torecord sound.INFORMATIONƈHow to use the VOICE RECORDING modeA voice recording can be recorded for as long as the available recording time of the memorycapacity allows. (Max: 1 hour)1. Select the [Full] sub menu on the [Mode] menu (p.24).2. Select the Voice Recording mode by pressing the M(Mode) button.3. Press the shutter button to record a voice.- Press the shutter button once and voice is recorded for aslong as the available recording time (Max : 1 hour) allows.The recording time will be displayed on the LCD monitor.Voice will still be recorded if the shutter button is released.- If you wish to stop recording, press the shutter buttonagain.- File type : WAVƈHow to use the SF modeIn poor indoor light conditions, Safety Flash will help you get a good image without the use ofa flash. In every camera mode, the SF mode can be selected. 1. Press the SF mode button. 2. Press the shutter button to capture an image.ſRefer to page 42 for more information about the SF function.[VOICE RECORDING mode][SF mode]
ŝ29ŞThings to Watch Out for When Taking PicturesƈPressing the shutter button down half way Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture.ƈThe available recording time may vary depending on shooting conditions and camerasettings.ƈWhen the Flash Off or Slow synchro mode is selected in a low lighting condition, the camerashake warning indicator ( ) may appear on the LCD monitor. In this case, support thecamera on a solid surface or change the flash mode to flash shot mode.ƈBacklight compensated shots : When taking an outdoor shot, avoid facing the sun, as theimage may be dark because of the strong backlight. To take a picture against the sun, please use the [Backlight] inthe scene shooting mode (see page 28), Fill-in flash (see page 37), Spot metering (see page 53), or Exposurecompensation (see page 45).ƈAvoid obstructing the lens or the flash when you capture an image.ƈUnder certain conditions the auto focus system may not perform as expected.- When photographing a subject that has little contrast.- If the subject is highly reflective or shiny.- If the subject is moving at high speed.- When there is strong reflected light, or when the background is very bright.- When the subject matter has only horizontal lines or the subject is very narrow (such as a stick or flagpole).- When the surroundings are dark[ Lightly press the shutter button ] [ Press the shutter button ]
ŝ30ŞUsing the camera buttons to adjust the cameraƈThe recording mode function can be set up by using the camera buttons.POWER buttonSHUTTER buttonƃIf the menu is not displayed, this button works as theOPTICAL ZOOM or DIGITAL ZOOM button.ƃUsed for turning the camera’s power on / off.ƃIf there is no operation during the specified time, thecamera's power will be turned off automatically to savebattery life. Refer to page 96 for more information about theauto power off function.ƃUsed for taking an image or recording voice in therecording mode.ƃIn MOVIE CLIP mode Pressing the shutter button down fully starts the process forrecording a movie clip. Press the shutter button once andthe movie clip is recorded for as long as the availablerecording time in the memory allows. If you wish to stoprecording, press the shutter button again.ƃIn STILL IMAGE modePressing the shutter button down halfway activates the autofocus and checks the condition ofthe flash. Pressing the shutter down fully takes the image and stores the relevant data regarding theshot. If you select voice memo recording, the recording will start after the camera has finishedstoring the image data.ZOOM W/ T button
ŝ31ŞZOOM W/ T buttonƈThis camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer atotal zoom ratio of 15X.ƃTELE ZoomOptical zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e.the subject will appear nearer.Digital zoom TELE : When the maximum (3X) optical zoom is selected, pressing theZOOM T button activates the digital zoom software. ReleasingZOOM T button stops the digital zoom at the required setting.Once the maximum digital zoom (5X) is achieved, pressing theZOOM T button will have no effect.[ WIDE zoom ] [ TELE zoom ] [ Digital zoom 5.0X ]Pressing theZOOM T buttonPressing theZOOM T buttonƃWIDE ZoomOptical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subjecti.e. the subject will appear further away. Pressing the ZOOM Wbutton continuously will set the camera to its minimum zoomsetting i.e. the subject appears at its furthest from the camera.Digital zoom WIDE : When the digital zoom is in operation, pressing the ZOOM Wbutton will reduce the digital zooming in steps.Releasing ZOOM W button stops digital zooming.Pressing the ZOOM W button will reduce the digital zoom andthen it will continue to reduce the optical zoom until the minimumsetting is reached. [ TELE zoom ] [ Optical zoom 2X ] [ WIDE zoom ]Pressing theZOOM W buttonPressing theZOOM W button[ Digital zoom 5.0X ] [ TELE zoom ] [ WIDE zoom ]Pressing theZOOM W buttonPressing theZOOM W buttonOptical zoomDigital zoom
ŝ32ŞZOOM W/ T buttonƃImages taken using the digital zoom may take a little longer for the camera to process.Allow time for this to take place.ƃThe digital zoom cannot be used in movie clip shots.ƃIf the Zoom buttons are being pressed during the Movie clip shots, the voice will notrecorded.ƃYou may notice a decrease in image quality when using the digital zoom.ƃTo view more clear digital zoom image, press the shutter button halfway at the maximum(3X) optical zoom position and press the zoom T button again.ƃThe digital zoom can’t be activated in the [Night], [Children], [Close up], [Text] and[Fireworks] scene modes.ƃTake care not to press the lens, lens cover and camera by force. This may cause thecamera malfunction.INFORMATIONƈWhile the menu is showing, press the UP button to move up the submenu cursor. When the menu is not displayed on the LCD monitor, the UP button operates as the voicememo ( ) button. ƃRecording a voice memo1. Press the M (Mode) button to select a Recording mode with the exception of Movie clipmode.2. Press the Voice memo ( ) button. If the voice memo indicator is displayed on the LCDmonitor, the setting is completed.Pressing the Voice memo buttonVoice memo( ) / UP button
ŝ33ŞVoice memo( ) / UP buttonƃA distance of 40cm between you and the camera (microphone) is the best distance torecord sound.INFORMATIONƈWhile the menu is showing, press the DOWN button tomove from the main menu to a submenu, or to move downthe submenu cursor. When the menu is not showing, youcan use the MACRO/ DOWN button to take macro pictures.The distance ranges are shown below. Press the Macrobutton until the desired macro mode indicator displays onthe LCD monitor. [Auto focus - No icon][Super macro ( )][Auto macro ( )] [Macro ( )]3. Press the shutter button and take a picture.The picture is stored on the memory.4. Voice memo will be recorded for ten seconds from themoment the picture is stored. In the middle of the voicerecording, pressing the shutter button will stop the voicememo.[Recording Voice Memo]Macro( ) / Down button
ŝ34ŞMacro( ) / Down buttonƈTypes of focus modes and focus ranges (W: Wide, T: Tele) (Unit : cm)ƃWhen the macro mode is selected, it is possible that camera shake will occur. Take care not to shake the camera.ƃWhen you take a picture within 20cm (Wide zoom) or 30cm (Tele zoom) in the Macromode, select the FLASH OFF mode.ƃWhen you take a picture within 5cm, the AF may take a time to get exact focus range. ƃThe super macro is executed on the wide zoom position only. INFORMATIONſSee the next page for the available focusing method, by recording mode.ModeFocus Type Super macro ( ) Auto macro NormalModeFocus Type Super macro Macro NormalFocus rangeFocus rangeW : 1~InfinityT : 50~InfinityW : 50~InfinityT : 50~InfinityW : 50~InfinityT : 50~InfinityW : 1~5(Wide only)W : 1~5(Wide only)W : 5~50T : 25~50ManualAuto
ŝ35ŞMacro( ) / Down buttonƈAvailable focusing method, by recording mode ( O: Selectable , X: Not selectable, ∞: Infinity focus range)Focus lockƈTo focus on the subject positioned outside of the centre, use the focus lock function.ƃUsing the Focus Lock1. Ensure the subject in the centre of the autofocus frame.2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it meansthe camera is focused on the subject. Be careful not to press the SHUTTER button all theway down to avoid taking an unwanted picture.3. With the SHUTTER button still pressed down only halfway, move the camera torecompose your picture as desired, and then press the SHUTTER button completely totake the picture. If you release your finger from the SHUTTER button, the focus lockfunction will be cancelled.1. The image to be captured. 2. Press the SHUTTERbutton halfway andfocus on the subject.3. Recompose the pictureand fully depress theSHUTTER button.XOXOXXOXOXOXOXOXSCENEModeAuto macroSuper macromacroNormalAuto macroSuper macromacroNormalModeXXX XXOXXXXXXXX XXXXXXXXXXX XOXXXXXXO O O ūX X ūūOūO
ŝ36ŞFlash ( ) / Left button[Selecting the Auto flash]ƃFlash range (Unit : m)ƈWhen the menu is displayed on the LCD monitor, pressingthe LEFT button makes the cursor shift to the left tab.ƈWhen the menu is not displayed on the LCD monitor, theLEFT button operates as the FLASH ( ) button.ƃSelecting the flash mode1. Press the M (Mode) button to select a Recording modewith the exception of Movie clip mode (p.25).2. Press the Flash button until the desired flash modeindicator displays on the LCD monitor. 3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suitthe environment.ƃWhen the flash is charging, a flash mode icon (red colour) will blink on the LCD monitor. ƃUsing the flash frequently will reduce the life of the battery.ƃUnder normal operating conditions the charging time for the flash is normally within 4seconds. If the battery is weak, the charging time will be longer.ƃDuring the continuous shot and movie clip mode, the flash function will not operate. ƃTake photographs within the flash range.ƃThe image quality is not guaranteed if the subject is too close or highly reflective.INFORMATIONAuto Macro Auto macroWIDE TELE WIDE TELE WIDE TELE0.5 ~ 2.4 0.5 ~ 1.9 0.2 ~ 0.5 0.3 ~ 0.5 0.2 ~ 2.4 0.5 ~ 1.9ISOAutoſIf the Super macro is selected, the flash is fixed as the Flash Off.
ŝ37ŞFlash ( ) / Left buttonMenu tab Flash mode Description ƃFlash mode indicatorIf the subject or background is dark, the camera flash will operateautomatically.Auto flashAuto &Red eyereductionFill in flash Slow synchroFlash offIf a subject or background is dark, the camera flash will workautomatically and will reduce the red-eye effect by using the red-eye reduction function.The flash will operate in conjunction with a slow shutter speed inorder to obtain the correct exposure. When you take an image ina condition with poor light, the camera shake warning indicator ( ) will display on the LCD monitor.The flash fires regardless of available light. The intensity of the flash will be controlled, according to theprevailing conditions. The brighter the background or subject is,the less intense the flash will be.The flash does not fire. Select this mode when capturing imagesin a place or situation where flash photography is prohibited.When you capture an image in a poorly lit condition, the camerashake warning indicator ( ) will display on the LCD monitor.ƃAvailable flash mode, by recording modeXXOX XX XXXXXX XOXOOX OOXXXX XX XXXXOX XX XXXXXOXXXXOOXXXXXX XX XXOOO O OO OOOO OX OX
ŝ38ŞSelf-timer ( )/ Right buttonƈWhen the menu is displayed on the LCD monitor, pressing the Right button makes the cursorshift to the right tab. The right button can also be used to move to a sub menu to select adifferent setting. When the menu is not displayed on the LCD monitor, the RIGHT buttonoperates as the Self-timer. This function is used when the photographer would also like to bein the image.ƃUsing the self-timer1. Press the M (Mode) button to select a still image mode or movie clip mode (p.25). 2. Press the Self-timer button until the desired mode indicator displays on the LCD monitor. In Movie clip mode, only the 10 Sec. self-timer can be used.- 2 Sec. Self-timer( ) : Pressing the shutter button will allow an interval of 2 secondsbefore the image is taken. - 10 Sec. Self-timer( ) : Pressing the shutter button will allow an interval of 10 secondsbefore the image is taken. - Double Self-timer( ) : A picture will be taken after about 10 seconds and 2 secondslater a second picture will be taken. When using the flash, the 2-second self-timer may be delayed for longer than 2 secondsdepending on the flash charge time.3. When you press the Shutter button, the picture will be taken after the specified time haselapsed.ſIf you operate the Power button and Self-timer button during the self-timer operation, theself-timer function is cancelled.Pressing the Self-timer button[2 Sec. self-timer]Pressing the Self-timer[10 Sec. self-timer][Double self-timer]
ŝ39ŞMENU/ OK buttonƈMENU button- When you press the MENU button, a menu related to each camera mode will be displayedon the LCD monitor. Pressing it again will return the LCD to the initial display.- A menu option can be displayed when the following are selected :MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICERECORDING mode is selected.ƈOK button- When the menu is displayed on the LCD monitor, this button is used for shifting the cursorto the sub menu or for confirming data.ƈYou can turn on the camera with this button. When the camera is turned on by pressing theM button, the Start image will not display and only the still image mode will be executed. ƈYou can select the desired recording mode.The selectable recording modes are different from what you selected sub menu in the [Mode] menu.- [Still/ Movie/ MP3]: A recording mode selected in the [Mode set] menu, Movie clip mode- [Full] : Auto, Movie clip, Manual, Scene modesƃHow to use the mode button : In case of [Still & Movie] and [Auto] sub menu M (Mode) button Pressing the MENU button[Menu off] [Menu on][Auto mode] [Movie clip mode]Pressing the M button twiceAutoManualMovieNightportraitChildrenMode Set
ŝ40ŞPortraitSet : OK/MManualSet : OK/MM (Mode) button ƃHow to use the mode button : In case of [Full] sub menu and Auto modeſPress the Mode button and the mode selection menu will disappear.Pressing the Up buttonPressing the Right buttonPressing the Left/ Right buttonPressing the Left button[Auto mode][Manual mode][Mode selection menu][Movie clip mode][Scene mode]Pressing the Mode button[Selecting a scene mode]NightAutoSet : OK/MSet : OK/MMovieSet : OK/M
ŝ41ŞSF button ƈPressing the SF button selects the SF(Safety Flash) modeIn poor indoor light conditions, Safety Flash will help you get a good image without the use ofa flash. As children are sensitive of using flash, this is suitable function for taking children. ƃThings to watch out for using the SF mode1. The SF range is 2m(WIDE) and 1.5m(TELE).2. The digital zoom will not operate in the SF mode. 3. If the lighting conditions are brighter than fluorescent lighting condition, the SF doesn’tactivate.4. If the lighting condition is darker than in fluorescent lightingcondition, camera shake warning indicator ( ) willdisplay. Take a picture in a place where the camerashake warning indicator is not displayed and you will getclear image. 5. If the subject is moving the final image captured may beblurred.6. As the SF uses the camera’s digital processor, images taken using the SF may take a littlelonger for the camera to process.
ŝ42Ş+/- buttonƈYou can use the +/- button to adjust the values for the RGB, ISO, white balance, exposurecompensation and Long Time shutter speed.ƈWhen the SF is selected, ISO value is fixed as AUTO and Exposure value is fixed as 0.0EV.ƈRGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images tobe captured. ƃSetting RGB Values1. Press the +/- button, and then use the UP and DOWNbuttons to select the RGB icon ( ). The RGB menu bar will appear as shown.2. Use the UP/ DOWN/ LEFT and RIGHT buttons to selectthe desired RGB value.- Up/Down Button : Navigates between R, G, and Bicons.- Left/Right Button : Changes value of each icon.3. When you press the +/- button again, the value you set will be saved and RGB setupmode will end.Main menu Sub menu Available camera modeRGB R (Red), G (Green), B (Blue)ISO AUTO, 100, 200, 400WHITE BALANCEExposure compensation -2.0 ~ 0.0 ~ +2.0 (0.5EV steps)LTShutter speed / Aperture Value(Changed by zoom rate)AUTO, DAYLIGHT, CLOUDY,FLUORESCENT H, FLUORESCENT L, TUNGSTEN,CUSTOM.
ŝ43Ş+/- buttonƃSelecting an ISO Sensitivity1. Press the +/- button, and then use the UP and DOWNbuttons to select the ISO icon( ). The ISO menu barwill appear as shown.2. Use the LEFT and RIGHT buttons to select the desiredISO sensitivity value.- AUTO : The camera's sensitivity is automatically changedby variables such as lighting value or subject brightness.- 100, 200, 400 : You can increase the shutter speed while the same amount of light ispresent, by increasing the ISO sensitivity. However, the image may be saturated in highluminance. The higher the ISO value, the higher the camera’s sensitivity to light is andtherefore the greater its capacity to take pictures in dark conditions. However, the noise levelin the image will increase as the ISO value increases, making the image appear coarse.3. When you press the +/- button again, the value you set will be saved and ISO setup mode will end.ƈWhite balance : The white balance control allows you to adjust the colours to appear morenatural looking. ƃSelecting a White Balance1. Press the +/- button, and then use the UP and DOWNbuttons to select the white balance icon ( ).The white balance menu bar will appear as shown.2. Use the LEFT and RIGHT buttons to set the whitebalance to the desired value. The value you set will bedisplayed on the LCD monitor.AUTO : The camera automatically selectsthe appropriate white balance settings, depending on the prevailinglighting conditions.DAYLIGHT : For taking images outside.CLOUDY : For taking images under a cloudy and overcast sky.Fluorescent H : For shooting under daylight fluorescent types of three-wayfluorescent lighting.Fluorescent L : Shooting under white fluorescent lighting.TUNGSTEN : For shooting under tungsten (standard light bulb) lighting.CUSTOM : Allows the user to set the white balance according to the shootingcondition.Different lighting conditions may cause a colour cast on your images.3. Press the +/- button again. The value you set will be saved and White Balance setup modewill end.ƈISO : You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers.
ŝ44Ş+/- buttonƃUsing the Custom White BalanceWhite balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environmentby setting up the custom white balance.1. Select the CUSTOM ( ) menu of the WhiteBalance.2. Place a sheet of white paper in front of the camera sothat the LCD monitor shows only white, and then pressthe SHUTTER button.3. Your custom white balance value is stored.- The custom white balance value will be applied,starting with the next picture you take.- The user configured white balance will be remaineffective until it is overwritten.[ White paper ]ƈExposure compensation : This camera automatically adjusts the exposure according to theambient lighting conditions. You can also select the exposure value by using the +/- button.ƃCompensating Exposure1. Press the +/- button, and then use the UP and DOWNbuttons to select the exposure compensation icon ( ). The exposure compensation menu bar willappear as shown.2. Use the LEFT and RIGHT buttons to set the desiredexposure compensation factor.3. Press the +/- button again. The value you set will besaved and the Exposure Compensation setup mode willclose. If you change the exposure value, the exposure indicator ( ) will be displayedon the bottom of the LCD monitor.ſA negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCDmonitor will appear white or you may not get good pictures.Measure:Shutter
ŝ45Ş+/- buttonƈLong Time shutter : This camera automatically adjusts the shutter speed and aperture valuesto the shooting environment. However, in NIGHT SCENE mode, you canset the shutter speed and aperture values to your preference.ƃAdjusting the shutter speed and aperture values1. Select the [Night] scene mode. (M button ƍ[Scene] ƍ[Night])2. Press +/- button and Long Time shutter menu(LT, For selecting shutter speed and aperture value) willbe displayed.3. Configure the Long Time shutter value with the up/ down/left/ right button.Up/ Down Button : Select the Aperture / Shutter speedLeft/ Right Button : Change the value. Available aperture value options, depending onzoom step will be displayed on the menu.4. Press the +/- button again. The value you set will be saved and the mode will switch toNIGHT SCENE mode. Press the SHUTTER button to take the picture.Aperture ValueShutter SpeedLarge/Small(Press right button)Large/Small(Press left button)Fast/Slow(Press left button)Fast/Slow(Press right button)ƈAperture values and shutter speeds changed by zoom scale are listed below.F 3.51 S Supported Aperture Values: AUTO, WIDE : F3.5 ~ F6.3, TELE : F4.5 ~ F8.0Supported Shutter Speeds: AUTO, 1 ~ 16S
ŝ46ŞUsing the LCD monitor to adjust the camera settingsƈYou can use the menu on the LCD monitor to set up recording functions. In any mode withthe exception of VOICE RECORDING mode, pressing the MENU button displays the menuon the LCD monitor.ƈThe following functions are available, depending on the mode you have selected.The items indicated by are default settings.ƃThe menu will not be displayed on the LCD monitor in the following circumstances:- When another button is being operated.- While image data is being processed. - When there is no battery capacity.INFORMATIONMenu tab Main menu Sub menu Camera working mode PageStill/ Movie/ MP3FullAuto ManualMovie NightPortrait ChildrenMode set Landscape Close up p.50Text SunsetDawn BacklightFirework Beach & Snow2592X1944 2272X17042048X1536 1600X1200 p.511024X768 640X480640X480 320X240160X128 -S.Fine FineNormal -ModeQualitySize(Movie)Size(Still image)p.49p.51p.52
ŝ47ŞUsing the LCD monitor to adjust the camera settingsſMenus are subject to change without prior notice.Menu tab Main menu Sub menu Camera working mode PageFrame Rate 30fps 15fps p.52Metering Multi Spot p.53Shooting Single Continuous p.53Soft NormalVivid -Full OSD Basic OSDSave Mode -Normal RedB&W GreenSepia BlueNegative -Highlight Off Range 1 ~ 4 p.56Off 2~4 PartsPano. 2 Parts -Photo Frame Off Frame 1 ~ 9 p.60Stabilizer Off On p.61SharpnessEffectOSD InformationCompositep.54p.54p.55p.58
ŝ48ŞHow to use the menu3. Use the UP and DOWN buttons to select a sub menu.4. Select a sub menu, and then the value you set will be saved. Press the MENU button andthe menu will disappear.ƈYou can select the desired working mode by the M(mode) button located on the back of thecamera and [Mode] menu. Auto, manual, movie clip, scene (night, portrait, children,landscape, text recognition, close-up, sunset, dawn, backlight, fireworks, beach & snow)camera modes are available.[Still/ Movie/ MP3] : A still image mode that was selected onthe [Mode set] menu and movie clipmode can be selected. [Full] : Auto, Manual, Movie clip and scenemodes can be selected.1. Turn on the camera and press the MENU button. A menu for each camera mode appears.However, there is no menu for Voice Recording mode ( ).2. Use the LEFT and RIGHT buttons to navigate through the menus.ModeStill & MovieFullModePress the LEFT or RIGHT button.Press the LEFT or RIGHT button.Press the UP orDOWN button.Press the UP orDOWN button.AutoManualMovieNightportraitChildrenMode Set2592 X 19442272 X 17042048 X 15361600 X 12001024 X 768640 X 480SizeStill & MovieFullModeAutoManualMovieNightportraitChildrenMode SetAutoManual MovieNightportraitChildrenMode SetAutoManual Movie NightportraitChildrenMode Set
ŝ49ŞMode SetƈYou can select the desired recording mode.[Auto] : For shooting basic still image[Manual] : You can still manually configure allfunctions except the aperture value andshutter speed.[Movie] : For taking a movie clip [Night] : Use this for shooting still images at nightor in other dark conditions.[Portrait] : To take a picture of a person.[Children] : To take a picture of fast moving objects, for example, children.[Landscape] : To take pictures of distant scenery.[Close up] : Close-up shooting for small objects such as plants and insects.[Text] : Use this mode to shoot a document.[Sunset] : For taking pictures of sunsets.[Dawn] : Daybreak scenes.[Backlight] : Portrait without shadows caused by backlight.[Firework] : Firework scenes.[Beach & Snow] : For ocean, lake, beach and snowscape scenes.ƃWhen [Night], [Landscape], [Close up], [Text], [Sunset], [Dawn] and [Firework] scenemode are selected, it is possible that camera shake will occur. In this case, take care ofthe camera shaking.INFORMATIONAutoManualMovieNightportraitChildrenMode Set
ŝ50ŞSizeƈYou can select the image size appropriate for your application.Icon5M 4M 3M 2M 1M VGA 640 320 160Size2592X1944 2272X1704 2048X15361600X1200 1024X768640X480 640X480 320X240 160X128STILL IMAGE modeMode MOVIE CLIP modeƃThe higher the resolution, the lower the number of available shots will be because highresolution images require more memory than lower resolution images.INFORMATION[ STILL IMAGE mode ] [ MOVIE CLIP mode ]2592 X 19442272 X 17042048 X 15361600 X 12001024 X 768640 X 480Size640 X 480320 X 240160 X 128Size

Navigation menu