Hanwha Techwin IEYEPRO USB PC Camera User Manual

Samsung Techwin Co Ltd USB PC Camera

USER MANUAL

- 1 -UUUSSSBBB   PPPCCC   CCCaaammmeeerrraaa   IIInnnssstttaaallllllaaatttiiiooonnn   GGGuuuiiidddeeeSAMSUNG AEROSPACE
- 2 -FCC Compliance StatementThis device complies with part 15 of the FCC Rules.   Operation is subject to the following two conditions:  (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.   These limits are designed to provide reasonable protection againstharmful interference in a residential installation.   This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.   However, there is no guarantee that interference will not occur in aparticular installation.   If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.- Consult the dealer or an experienced radio/TV technician for help.Warning: You are cautioned that any change or modifications to the equipment not expressly approved bythe party responsible for compliance could void your authority to operate such equipment.NOTE: This unit was tested with shielded cables on the peripheral devices.   Shielded cables must be usedwith the unit to insure compliance.
- 3 -SSSAAAMMMSSSUUUNNNGGG   UUUSSSBBB   PPPCCC   CCCaaammmeeerrraaa   IIInnnssstttaaallllllaaatttiiiooonnn   GGGuuuiiidddeee1. Before the installation  • Check your PC system if it is superior than the followingMinimum System     Requirements.  In  case  of  inferiority,  it  may  cause  theinstallation error     or malfunction of the camera.     •Minimum System Requirements       - USB support Host PC       - Pentium 200MHz MMX (233MHz MMX or faster recommended)       - Windows 98/2000       - 32MB RAM (64MB recommended)       - 100MB hard disk space available       - CD-ROM drive       - 800x600, 16 bit color display (1024x768 recommended)       - Microsoft Internet Explorer for video e-mail       - LAN card or 56.6K bps modem for Video Conference       - Windows compatible sound card (full duplex sound cardrecommended)       - Speakers required for receiving audio       - Microphone required for sending audio  • Power on the PC and start Windows.2. Installing the software• Place the CD-ROM into your CD-ROM drive. The autoplayinstallation program   will start automatically. - It takes 5~10 seconds to load the autoplay according to PCsystem.   If the software does not automatically load, run “WindowsExplorer”.   And then run “autoplay.exe” in CD-ROM drive.! Note : Install the software first before connecting theamera with P! Note : Install the software first before connecting theamera with P
- 4 -1) Installing the Power View   The autoplay will load the   installation  window,  asshown in   right picture.   Press “Power View” and select   “English”. Power View program   will  be  Installedautomatically   and come back to theinstallation   window.2) Installing the Power Album and finishing the installation •  Press  “Power Album” andselect    “English”. • Click Next. • Click Next.
- 5 - •  After  successfulinstallation,    the  right  window  willappear.    Click Finish and then the    installation  window  willappear    once again. • The software installation is    finished completely.    Find the finish mark (•) inthe    installation  window  andclick    “Exit”.3. Connecting the camera with PC [] • Plug the USB cable of camera in USBport    of PC. •  “Add New Hardware Wizard”! Note : Install the software first before connecting the camerawith P
- 6 -ENH-se05.jpgENH-se03.jpgENH-se04.jpgENH-se02.jpgENH-se05.jpgwindow    will appear. Click Next to    continue. • Click Next. • Find the mark (•) at“Specify a    location” in Wizard window.    And click Next. • Click Next.
- 7 - ENH-se03.jpgENH-se02.jpgENH-se06.jpg •  After  successfulinstallation,    the  right  window  willappear.    Click Finish and then the    indicator  lamp  of  camerawillturn on.    Now  you  can  work  with  USBPC    Camera.4. Connecting the camera with PC []  • If you connect the camera with PC before software installation •  “Add New Hardware Wizard”window    will appear. Click Next to    continue. • Choose "Search for the best    driver for your device    (Recommended)". Click Next.! Note : If you connect the camera with PC before softwareinstallation,         installation  error  may  occur.  Therefore  it  isrecommended that you         should  click  Cancel during the following •-• stage anddisconnectthe camera with PC, and then install the software first
- 8 -EH-set06.jpg • a) Insert the installationCD-ROM.    b)  Choose  "Specify  alocation”.    c) Click Browse… and select       "Driver"  folder  in  theCD-ROM       drive.    d) Click Next. • Click Next. • Click Finish and then the    indicator  lamp  of  camerawillturn on.    Install  the  softwarereferring to    Page 5-8. 1) Click OK in the Insert Disk message window.EH-set08.jpg! Note : In case of occurring the following message during theinstallation,insert the Windows CD- ROM and click OK.If d 't h th Wi d D ROM f ll th tbcd
- 9 -EH-set10.jpg 2) Remember unfound file nameinright window. 3) Select•Start•Find•File orfolder•in the task bar. Typethefile name at "Named" frameandclick Find Now.Specify a location of thefile at"Copy files from" frame inabove2) window. And click OK. 4) If Insert Disk message window occurs again, repeat the above1)-3) stages.4. Starting the program • Select and double-click Samsung USB PC Camera icon   tostart. • Shell program will appear andyou can control theapplicationprograms easily.EH-set11.jpg! Note  - Generally, application programs related with video displayand recordneed a lot of memories of PC. Therefore it is recommendedthat youshould close all other programs before starting videoapplicationprograms.  - After starting video application programs,adjust the Focusing Dial to take good videoquality.  - This guide is only for installation and briefH-set11.jpg
- 10 -Power View displays and capturesstill images & video clips.Also you can send e-mail the capturedstill images & video clips by it's compression technology withoutnetwork troubles.Power Album allows the users toedit the captured still images,and createsticky pictures & photo album.It supplies more 600 clip artimages and you can make CD-ROMwith edited photo album.Video Conference links Microsoft NetMeeting allows you to holdface to face conversations over the Internet with friends andfamily. Collaborate with co-workers around the world with thisstandard video conferencing toolIt is PC surveillance program. While youare away from your computer, this programmakes a soundwith several beepers and captures stillPower ViewPower Album! Note : The installation CD-ROM must be in the CD-ROM drive torunPower Album.  Please be cautious not to be lostsuppliedVideoMotion! Note : Microsoft NetMeeting Ver. 2.0 is supported by Windows98.            If you do not have Microsoft NetMeeting in yourcomputer, Video         Conference does not work properly. Please setup theNetMeeting at
- 11 -imageswhenever any motion is detected.It supplies four kinds of simple Games with PC Camera, as it is,Shoop,Punch The Clown, Pop The Bubble, BounceIt.It provides a guide of using Shell program.Exit Shell program.GameHelpExit! Note :  You need another installation procedures for game.Please refer to        the Installation of Game in Help of Shell program
- 12 -7. Specifications     •Specifications are subject to change without prior notice.Stilland Video ImageQualityImage Sensor 1/3¡±CMOS with VGA resolution, 640¡¿480 pixelsStill Image Resolution 640¡¿480 pixels, 24 bit colorVideo Image Resolution ¡¤VGA(640¡¿480) : 15 frame per second¡¤CIF(352¡¿288) : 30 frame per second¡¤QCIF(176¡¿144): 30 frame per secondVideo Compression 1/50 ~ 1/100 (software compression : MPEG)White Balance AutomaticExposure Automatic or manual controlledS/N Ratio Greater than 48dBOptics & M echanicalLens Manual focus ; f=6.0§®, F 1.8Focus Range 10§¯ to infinityInterface 1.8m USB cablePower Supplied by USB portPower Consumption : 5V / 150§Ì ActiveDimensions(W¡¿H¡¿D) 52¡¿44.6¡¿92§®Software Power View, Power Album, Motion Detector, Game* Connection with Microsoft NetMeetingMinimum System R equire m e n ts¡¤USB support Host PC¡¤Pentium 200MHz MMX (233MHz MMX or faster recommended)¡¤Windows 98/2000¡¤32MB RAM (64MB recommended)¡¤100MB hard disk space available¡¤CD-ROM drive¡¤800x600, 16 bit color display (1024x768 recommended)¡¤Microsoft Internet Explorer for video e-mail¡¤LAN card or 56.6K bps modem for Video Conference¡¤Windows compatible sound card (full duplex sound card recommended)¡¤Speakers required for receiving audio¡¤Microphone required for sending audio

Navigation menu