Hanwha Techwin IEYEPRO USB PC Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	116295
Application ID	uIV7rSiJd6LAZTOTfV/NDg==
Document Description	USER MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	517.98kB (6474753 bits)
Date Submitted	2000-09-08 00:00:00
Date Available	2000-09-08 00:00:00
Creation Date	2000-09-08 16:17:29
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-09-08 16:17:31
Document Title	USER MANUAL

UUSSBB PPCC CCaammeerra
IInnssttaallllaattiioonn GGuuiddee
SAMSUNG AEROSPACE
-1-
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that any change or modifications to the equipment not expressly approved by
the party responsible for compliance could void your authority to operate such equipment.
NOTE: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used
with the unit to insure compliance.
-2-
SSAAMMSSUUNNGG UUSSBB PCC Caammeeraa
IInnssttaallllaattiioonn GGuuiddee
1. Before the installation
! Note : Install the software first before connecting the
amera with P
• Check your PC system if it is superior than the following
Minimum System
Requirements. In case of inferiority, it may cause the
installation error
or malfunction of the camera.
•Minimum System Requirements
- USB support Host PC
- Pentium 200MHz MMX (233MHz MMX or faster recommended)
- Windows 98/2000
- 32MB RAM (64MB recommended)
- 100MB hard disk space available
- CD-ROM drive
- 800x600, 16 bit color display (1024x768 recommended)
- Microsoft Internet Explorer for video e-mail
- LAN card or 56.6K bps modem for Video Conference
- Windows compatible sound card (full duplex sound card
recommended)
- Speakers required for receiving audio
- Microphone required for sending audio
• Power on the PC and start Windows.
2. Installing the software
! Note : Install the software first before connecting the
amera with P
• Place the CD-ROM into your CD-ROM drive. The autoplay
installation program
will start automatically.
- It takes 5~10 seconds to load the autoplay according to PC
system.
If the software does not automatically load, run “Windows
Explorer”.
And then run “autoplay.exe” in CD-ROM drive.
-3-
1) Installing the Power View
The autoplay will load the
installation
window,
as
shown in
right picture.
Press “Power View” and select
“English”. Power View program
will
be
Installed
automatically
and
come
back
to
the
installation
window.
2) Installing the Power Album and finishing the installation
“Power
•
Press
select
“English”.
Album”
and
• Click Next.
• Click Next.
-4-
•
After
successful
installation,
the
right
window
will
appear.
Click Finish and then the
installation
window
will
appear
once again.
• The software installation is
finished completely.
Find the finish mark (•) in
the
installation
window
and
click
“Exit”.
3. Connecting the camera with PC [ ]
! Note : Install the software first before connecting the camera
with P
• Plug the USB cable of camera in USB
port
of PC.
•
“Add
New
Hardware
Wizard”
-5-
window
will appear. Click Next to
continue.
ENH-se02.jpg
ENH-se03.jpg
• Click Next.
•
Find
the
mark
(•)
at
“Specify a
location” in Wizard window.
And click Next.
ENH-se04.jpg
• Click Next.
ENH-se05.jpg
-6-
•
After
successful
installation,
the
right
window
will
appear.
Click Finish and then the
indicator lamp of camera
will
turn on.
Now you can work with USB
PC
Camera.
ENH-se06.jpg
4. Connecting the camera with PC [ ]
• If you connect the camera with PC before software installation
! Note : If you connect the camera with PC before software
installation,
installation
error
may
occur.
Therefore
it
is
recommended that you
should click Cancel during the following •-• stage and
disconnect
the camera with PC, and then install the software first
• “Add New Hardware Wizard”
window
will appear. Click Next to
continue.
ENH-se02.jpg
• Choose "Search for the best
driver for your device
(Recommended)". Click Next.
-7-
ENH-se03.jpg
• a) Insert the installation
CD-ROM.
b)
Choose
"Specify
location”.
c) Click Browse… and select
"Driver" folder in the
CD-ROM
drive.
d) Click Next.
• Click Next.
EH-set06.jpg
• Click Finish and then the
indicator lamp of camera
will
turn on.
Install
the
software
referring to
Page 5-8.
the following message during the
! Note : In case of occurring
EH-set08.jpg
installation,
CD- ROM
and click
OK.
OK in the
the Windows
Insert Disk
message
window.
1) Clickinsert
If
d 't h
th Wi d
D ROM
f ll
th
-8-
2) Remember unfound file name
in
right window.
EH-set10.jpg
3) Select•Start•Find•File or
folder•in the task bar. Type
the
file name at "Named" frame
and
click Find Now.
Specify a location of the
file at
"Copy files from" frame in
above
2) window. And click OK.
EH-set11.jpg
H-set11.jpg
4) If Insert Disk message window occurs again, repeat the above
1)-3) stages.
4. Starting the program
• Select and double-click Samsung USB
start.
PC
Camera
icon
to
• Shell program will appear and
you
can
control
the
application
programs easily.
! Note
- Generally, application programs related with video display
and record
need a lot of memories of PC. Therefore it is recommended
that you
should close all other programs before starting video
application
programs.
- After starting video application programs,
adjust the Focusing Dial to take good video
quality.
- This guide is only for installation and brief
-9-
Power View
Power View displays and captures
still images & video clips.
Also you can send e-mail the captured
still images & video clips by it's compression technology without
network troubles.
Power Album
Power Album allows the users to
edit the captured still images,
and create
sticky pictures & photo album.
It supplies more 600 clip art
images and you can make CD-ROM
with edited photo album.
! Note : The installation CD-ROM must be in the CD-ROM drive to
run
Power Album.
Please be cautious not to be lost
supplied
Video
Video Conference links Microsoft NetMeeting allows you to hold
face to face conversations over the Internet with friends and
family. Collaborate with co-workers around the world with this
standard video conferencing tool
! Note : Microsoft NetMeeting Ver. 2.0 is supported by Windows
98.
If you do not have Microsoft NetMeeting in your
computer, Video
Conference does not work properly. Please setup the
NetMeeting at
Motion
It is PC surveillance program. While you
are away from your computer, this program
makes a sound
with several beepers and captures still
- 10 -
images
whenever any motion is detected.
Game
! Note : You need another installation procedures for game.
It
supplies
Please
referfour
to kinds of simple Games with PC Camera, as it is,
Shoop,
the Installation of Game in Help of Shell program
Punch The Clown, Pop The Bubble, BounceIt.
Help
It provides a guide of using Shell program.
Exit
Exit Shell program.
- 11 -
7. Specifications
•Specifications are subject to change without prior notice.
S till and V ideo Im age Q uality
Image Sensor
1/3¡±CMOS with VGA resolution, 640¡¿480 pixels
Still Image Resolution
640¡¿480 pixels, 24 bit color
Video Image Resolution
¡¤VGA(640¡¿480) : 15 frame per second
¡¤CIF(352¡¿288) : 30 frame per second
¡¤QCIF(176¡¿144): 30 frame per second
Video Compression
1/50 ~ 1/100 (software compression : MPEG)
White Balance
Automatic
Exposure
Automatic or manual controlled
S/N Ratio
Greater than 48dB
O ptics & M echanical
Lens
Manual focus ; f=6.0§®, F 1.8
Focus Range
10§¯ to infinity
Interface
1.8m USB cable
Power
Supplied by USB port
Power Consumption : 5V / 150§Ì Active
Dimensions(W¡¿H¡¿D)
52¡¿44.6¡¿92§®
Software
Power View, Power Album, Motion Detector, Game
* Connection with Microsoft NetMeeting
M inim um S ystem R equirem ents
¡¤USB support Host PC
¡¤Pentium 200MHz MMX (233MHz MMX or faster recommended)
¡¤Windows 98/2000
¡¤32MB RAM (64MB recommended)
¡¤100MB hard disk space available
¡¤CD-ROM drive
¡¤800x600, 16 bit color display (1024x768 recommended)
¡¤Microsoft Internet Explorer for video e-mail
¡¤LAN card or 56.6K bps modem for Video Conference
¡¤Windows compatible sound card (full duplex sound card recommended)
¡¤Speakers required for receiving audio
¡¤Microphone required for sending audio
- 12 -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2000:09:08 16:17:29
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:09:08 16:17:31-04:00
Page Count                      : 12

EXIF Metadata provided by EXIF.tools