Hanwha Techwin SEW3041W Wireless Baby Monitor User Manual Part 2

Samsung Techwin Co Ltd Wireless Baby Monitor Part 2

Contents

User Manual Part 2

8 · Viewing Mode DisplayIndicator DescriptionHow to use the indicatora b cd gf h i jea Signal IndicatorThe signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal – One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.b Camera NumberIndicates which camera is being displayed on the current screen. When scan mode is selected, this icon will flash. c x2 Zoom modeIndicates that current screen is Zoomed in. Use the four directional buttons to pan the camera. Select x1 in the menu or press [ SEW-3036W ] button on the monitor to zoom back out. d Night Vision IndicatorIndicates camera night vision mode is turned on. The screen will appear in Black/White in this mode.e Digital ClockDisplays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format.f Night lightIndicates the night light is on.g Monitor Speaker MuteIndicates the monitor speaker is muted. Once the monitor’s speaker is muted, no sound from the camera is produced. h VOX OnIndicates the Power / VOX slide switch position is set at “VOX” mode.i Battery Capacity Level Indicates remaining battery charge. Indicated in 4 levels, and one discharge warning.j ChargingIndicates the battery is charging by DC input power. If battery nearly empty, it will flash to alert user to charge up the unit.No Signal WarningsThe "Out of Range" message means the monitor cannot access the camera. Please reposition the camera, or check the camera power.Menu OperationHow to use the setup buttonsPress the [MENU] button of the monitor to display the menu screen. Use [$/%/_/+] button to traverse the menu, and press [ ] button to apply the changes. VIeWInG Mode dIsplay
English · 903 Viewing Mode Display1. Press [MENU] button to enter the menu setting or exit the menu setting.2. Move to other menu by press [_] or [+] button.3. Adjust option level by [$] or [%] button.4. Press [ ] button to save and complete. n `If no action more than 20sec, it will be time out back to monitor mode with save.How to use the setup icona b e f g hc da BrightnessAdjusts the brightness of the image shown. If you are using multiple camera, you can adjust the brightness of each individual camera.b Camera VOX SensitivityIf not in “VOX” mode, “OFF” is displayed and not to be selected. In VOX mode, you can select “H” (High) or “L” (Low). If set to “H”, monitor can be triggered by lower audio level than “L” setting.c PairingYou can register a wireless camera with the monitor using the registration menu where you can view the video of the selected wireless camera.d ZoomZoom in on the current image (2x). If you are using multiple cameras, you can set the zoom for each camera. e Select Camera to View and Scan ModeSet which camera is being currently viewed. Each time a different camera is selected, the Brightness, VOX Sensitivity Level, Camera Speaker Volume, and Zoom settings will be saved to that specific camera. If “SCAN” mode is selected, each of the registered cameras will be viewed in ascending order at 10 second intervals. If one or more cameras are turned off or out of range, the monitor will show the “Out of Range” indicator for the 10 seconds for that particular camera. f g Time SettingSet the time shown on the monitor. Use the [_] or [+] button to select a field. Use the [$] or [%] button to change the numbers in the selected field. h ResetChoose <YES> to reset the monitor to factory defaults. All settings including time and paring information will be set to the factory defaults.SEW-3036WSEW-3036W► ►SEW-3036WSEW-3036W►Enter menu settingMove to a menuAdjust level Save the change Set Camera Speaker Volume Adjust the volume of the speaker on the camera in this menu. The volume can be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the quietest.

Navigation menu