| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1731077 |
| Application ID | 7SzpcOcckAAJuALei+xsSQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 152.14kB (1901718 bits) |
| Date Submitted | 2012-06-27 00:00:00 |
| Date Available | 2012-06-27 00:00:00 |
| Creation Date | 2012-06-05 10:21:46 |
| Producing Software | Gaaiho PDF |
| Document Lastmod | 2012-06-19 22:31:52 |
| Document Title | Microsoft Word - Appendix 4. Block Diagram |
| Document Creator | Microsoft Word - Appendix 4. Block Diagram |
| Document Author: | Dell |
CE TEST REPORT
Report No.: EMC-FCC-R0065
http://www.emc2000.co.kr
Appendix 6.
User manual
EMC compliance Ltd.
480-5 SHIN-DONG, YEONGTONG-GU, SUWON-CITY, GYEONGGI-DO, KOREA 443-390
82 31 336 9919 (Main) 0505 299 8311 (Fax)
This test report shall not be reproduced except in full, Without the written approval.
SAMSUNG SMARTCAM
User Manual
SNH-1011N
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
Samsung SmartCam
User Manual
Copyright
©2012 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their
respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no
circumstances, this document shall be reproduced, distributed or changed, partially or
wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents
in this document, but no formal guarantee shall be provided. Use of this document
and the subsequent results shall be entirely on the user’s own responsibility. Samsung
Techwin reserves the right to change the contents of this document without prior notice.
Instructions & Warranty
The manufacturer is not responsible for any loss or radio/TV interference caused by
unauthorized modification of the product.
Such modification will void the warranty of the product as well as the user’s right of use.
WARNING
• The product must be assembled and installed by an adult.
• Before using, read all instructions on this manual thoroughly and follow operational
instructions, warnings on this manual and printed on the product.
• To avoid entangled power cord, do not place it around the baby bed or other infant
furniture. Keep this product and its power cord out of children’s reach.
• Especially, the power cord should be installed carefully while keeping it out of
children’s reach.
• Never use the product near bath tub, sink, washing machine and in wet basement to
avoid moisture.
• The product is designed for indoor use.
• The product is not designed for medical monitoring, and requires a grown-up’s
protective supervision on its use.
• To avoid overheating of the product, do not expose the product to direct sunlight; do
not install or use near a heat source such as heater, radiator, cooking devices (ex:
electric stove or oven) and other warming devices (ex: audio amplifier, TV, etc.).
• Make sure to keep ventilated while using the product.
Avoid pillar or furniture that may block ventilation, when installing the product.
• Make sure to use the power adaptor provided. If used with unidentified adaptor, it
may damage the product. The power adaptor must be used with regular household
electric supply.
• Avoid sharp, pointed objects around the adaptor’s cable, not to damage the cable.
• Be warned and never hold the cable’s stripped part when connecting / disconnecting
the adaptor to/from the wall outlet.
• To avoid entangled cable lines, avoid using cable extension for adaptor’s power cord.
• The product’s servicing is allowed only to authorized Samsung Techwin’s service
personnel.
• When using the product for children’s care, be careful to keep the product out of
children’s reach.
• The product partially contains component which might cause respiration difficulty.
Accessories and small parts of the product should be stored keeping out of children’s
reach.
• The product is not designed to replace responsibility of human supervision on
children.
• The product is not equipped with device of immediate notification to adult with
accidental/sudden children‘s move; it requires periodic checks and human
supervision.
Contents
Getting Started
Features………………………………………………………… 4
Getting to know your Monitoring system……………………… 6
Installation & Network Connection
Installation……………………………………………………… 8
Network Connection and Settings……………………………… 10
Monitoring
Settings………………………………………………………… 13
Live Video Setup ……………………………………………… 23
Admin …………………………………………………………… 25
Appendix
Specifications…………………………………………………… 27
Troubleshooting…
01
Getting Started
Features
What’s Included
Getting to know your Monitoring
system
Power Supply
Network connection
Features
• Easy to install
-- With the help of WPS (Wi-Fi Protected Setup), wireless sharing and easy
connection are enabled.
-- Simply visit the home page (www.samsungsmartcam.com) and download and
install the program without a separate installer program.
• Remote monitoring
-- Whenever and wherever if you are in the Internet enabled environment, remote
monitoring is ready for you.
-- PC, laptop or smart phone can be used for monitoring.
• Real-time alarm
-- Detect motion and sound before outputting the alarm in real time via Google Talk
Messenger or with smart phone.
• Cloud Storage
-- Upload the event video and images to the user’s YouTube (video) or Picasa
(images) account automatically.
-- Anytime anywhere you can enjoy the video and images stored in the cloud
storage.
• Two-way Audio
-- With the built-in speakers and microphone, you can make Two-way
communications.
However, it is available only with the smart phone. (Not applicable to the PC or
laptop computer.)
• SNS (Social Networking Service) Alarm supported
-- Provide the event alarm (message, video, image) via YouTube, Picasa or Twitter.
-- Share special video footage and images with your friends.
• IR Flash
-- In a low contrast scene, you can use IR Flash for the monitoring purpose.
4 · English
What’s Included
The system comes with the following components:
Power Adaptor
Quick Guide
Warranty Card
Bracket wall
Tape wall hanging
Network Cable
Getting Started
Camera & Bracket body
01
Check for above components when opening the product package.
Getting to know your Monitoring system
DC 5V Power Input
Built-in IR LEDs for night vision
Press to access the receiver menu.
Press the button again to exit.
DC IN 5V
Used if WPS is not supported on the Wireless Access
Point or if you do not have a Wireless Access Point
High quality camera lens
NETWORK
Power / Wi-Fi status LED
Built-in Mic
Network port
SAMSUNG SMARTCAM
Built-in speaker
스마트폰에서 전달되는 음성을 출력합니다.
Privacy button
Press once to stop transmitting video/audio
Press and hold for 5sec to reset the camera to default
settings
WPS button
Used to pairing the camera with the Wireless Access
Point
6 · English
Power Supply
Network connection
Plug-in the camera power adapter to the wall outlet and connect the camera as
shown.
It will take about 1min for the camera to boot-up completely.
When the boot-up is complete, the power LED color will change from red to blue.
01
자세한 네트워크 설정 방법은 "Network Connection and Settings"을
참고하세요. (10쪽)
LED status
Getting Started
LED 색상은 동작 상태에 따라 달라집니다.
다음 표를 참고하세요.
색상
Red
DC IN 5V
Red Blinking
Green
NETWORK
Blue Blinking
AM
G SMARTC
Blue
Yellow
◀
▶ LOC
SAMSUN
OCK
``
``
Make sure to use the provided power adaptor. Otherwise, the product may not operate
properly.
UNL
nn ``
제공된 Network Cable 과 카메라 뒷면의 NETWORK 단자를 연결하세요.
Magenta
상태
Booting 중
Booting 완료 / Alarm 발생
Server 연결 완료 / 정상 동작 중
WPS Pairing 중(0.5초) / Network Setting 중(1초)
Network 연결 완료
Privacy로 설정되어 있는 중
Firmware 업데이트 중
02
Installation &
Network Connection
Installation
Precautions
Wall mounting
Stand mounting
Network Connection and Settings
10
11
Precautions
11
If using a cable router
12
If using a Wireless Access Point not equipping WPS 12
To connect to a wireless network with WPS
13
8 · English
Installation
Precautions
1.
Install the camera in a place where it can receive the video signal with no
interference.
2.
Keep it away from humidity such as around the humidifier.
3.
Keep it away from the direct sunlight, strong light or dust; install it in a place
of clear view.
4.
Do not install it in a place interrupted by an obstacle.
5.
Keep the lens clean at all times.
Wipe it off of dust with a soft cloth.
Wall mounting
4.
Adaptor 플러그 부분이 12시
nn `` 방향을
향하도록 하세요.
조립하기
1.
Zipper bag에서 Tape wall hanging 및 Bracket wall을 꺼내세요.
2.
Tape wall hanging의 사각형 바닥면
필름을 제거한 후, Bracket wall의
바닥면에 위치를 맞춰 부착하세요.
Tape wall hanging의 손잡이를 잡고 이형지를 제거한 후, 부착하고자
하는 면의 [▲ Top] 표시가 12시 방향을 향하게 하여 부착하세요.
nn ``
``
The Tape wall hanging cannot be reused after being used
once.
부착면에 먼지 / 물기 / 기름기를 사전에 닦아낸 후 부착해야
접착력이 좋습니다.
TOP
02
TOP
5.
Bracket body의 두 개의 홈에 맞춰 선을 정리하세요.
body의 [UNLOCK LOCK] 표시와 Bracket wall의
nn `` Bracket
[▲ Top] 각인 방향이 동일한 방향을 향하게 하세요.
6.
Bracket body를 시계 방향으로 ‘딸깍’ 소리가 들릴 때까지 회전시켜
고정하세요.
TOP
UNLOCK ◀
▶ LOCK
UNLOCK ◀
▶ LOCK
Bracket
body의홈
Installation & Network Connection
3.
동봉된 Adaptor의 선을 Bracket wall의
홈에 끼우세요.
7.
분리하기
Adaptor의 플러그와 카메라 뒷면의 전원
단자와 연결하세요
DC IN 5V
done, remove the protective film from
nn `` When
the lens.
NETWORK
1.
카메라 뒷면의 전원 단자에서 Adaptor의 플러그를 빼세요.
2.
Bracket body의 왼쪽에 있는 [PUSHI TO RELEASE] 를 누른 상태에서
시계 반대방향으로 돌리면, Bracket wall이 분리됩니다.
AM
G SMARTC
SAMSUN
TO RELEASE] 를 누르지 않고 Bracket body를 시계
nn `` [PUSHI
반대방향으로 돌려도 됩니다.
UNLOCK ◀
8.
▶ LOCK
Adjust the camera’s shooting angle as
appropriate.
nn ``
UNLOCK
◀
▶LOCK
Do not put excessive force. Otherwise, it may
cause damage to the camera.
Stand mounting
조립하기
1.
10 · English
Bracket body와 Bracket wall의 [▼], [▲] 각인 방향에 맞춰 조립하세요.
2.
Bracket wall의 홈을 이용하여 시계 방향으로 ‘딸깍’ 소리가 들릴 때까지
회전시키세요.
3.
분리 시, Bracket body 측면의 [PUSHI TO RELEASE] 를 누른 상태에서
홈을 이용하여 시계 반대방향으로 회전시키세요.
nn `` 조립 및 분리 시, 손톱이 부러지지 않도록 주의하세요.
Adaptor의 플러그와 카메라 뒷면의 전원 단자와 연결하세요.
DC IN 5V
OCK
◀
▶ LOC
SAM
Precautions
• The wireless network access may fail, depending on the communications
environment.
• For details about the network settings and password, contact your network
administrator or service provider.
• For a specific Internet service requiring user authentication, you may not access
the service. If this is the case, contact the service provider.
• Do not access the unauthorized network.
• The farther the distance from the Wireless Access Point, the longer time the
network connection may take.
• If you fail to access the selected wireless network, try a different Wireless
Access Point to make access.
• For more information about the router or the wireless connection, refer to the
documentation of the router or contact the router manufacturer.
• If the camera is connected to a multiple-Wireless Access Point network
environment, some video packets may be lost, depending on the network traffic
load.
• According to the network policy (blocking UDP) of the service provider, the video
transmission can be limited to one minute.
• In addition to the above two situations, you may encounter a network delay or
interruption due to the network conditions.
• This product has gone through the compatibility test with worldwide top ranking
routers in the market but you may still have a problem in compatibility with some
conventional routers or other routers manufactured by other than the industry
leading companies.
11
02
Installation & Network Connection
NETWORK
AM
RTC
SUNG SMA
UNL
4.
Network Connection and Settings
If using a cable router
If using a Wireless Access Point not equipping WPS
If you do not have a Wireless Access Point, you must connect the camera using
LAN cable directly to your home router.
Connect the network cable to the camera and to the home router as shown
below . Please refer to on page 24.
1.
DC IN 5V
NETWORK
SAMSUNG SMARTCAM
If you want to connect the camera using a non-WPS Wireless Access Point,
change the network setting to Wire and try the wireless network.
Use the network cable (LAN cable) to connect the LAN port of the unit to the
LAN port of the Wireless Access Point.
1.
DC IN 5V
NETWORK
SAMSUNG SMARTCAM
OR
Internet Service
Internet Service
2.
Register and select the camera according to guide of 03. Monitoring.
3.
Set your wireless network environment using the guideline on page 24.
nn `` When the wireless network settings are completed, remove the LAN cable.
``
12 · English
If you fail to connect to the Internet service, contact the service provider for details.
the Wireless Access Point do not support WPS or you do not have wirelss router,
nn `` Ifplease
go to Wired Connection.
To connect to a wireless network with WPS
``
What is WPS?
WPS enables to make connection between the camera and the Wireless Access
Point with a simple click of the button.
1.
When you apply the power, the power status LED is lit red, and it will change
to red blinking when the booting is completed.
2.
Press the WPS button on the camera.
Press the WPS button on the Wireless Access Point within 2min.
NETWORK
DC IN 5V
``
On some routers, you may need to log in to the web interface and click on an
on-screen button to activate the WPS feature.
If you fail to connect to the Internet service, contact the service provider for details.
WPS Button
SAMSUNG SMARTCAM
NETWORK
SAMSUNG SMARTCAM
Wi-Fi
Indicator LED
Internet Service
3.
The WiFi status LED will become steady blue once the camera is connected
to the Wireless Access Point. (may take up to 30sec).
If the Wi-Fi status LED (blue) is not lit, repeat steps 2 through the end and
check it again.
4.
The Wi-Fi status LED will became steady green once the camera is
connected to server.
13
02
Installation & Network Connection
WPS Button
``
If no WPS button is displayed or visible on the display, see the Wireless Access Point’s
manual or contact the manufacturer of your Wireless Access Point for technical
assistance.
Monitoring
Settings
03
Account Setup and Registering the Camera
Live Video
Alarm Settings
Live Video Setup
Video Setting
Network Setting
Time Setting
Admin
Private Key
Update Firmware
My Account
14 · English
14
14
20
21
24
24
25
26
26
26
27
27
Settings
Account Setup and Registering the Camera
Once you register the product with the site, you can monitor the camera video on
the PC or laptop computer.
Web browser requirements
Windows
Mac
- Windows 7, XP supported
- Internet Explorer 7 or 8
(The 64-bit Internet Explorer 8 is not
supported.)
- Firefox
- Safari
- Firefox
- Chrome
- Chrome
nn `` If you fail to make network connection with MAC Safari, follow the instructions below:
1) Click to run the Finder.
2) Click the application, and double-click the Utilities icon.
3) Double-click on the Java Preferences icon.
4) When the Java installer screen appears, click Install.
5) When the installation is completed, check the option of “Enable Web Start and
applet plug-in applications” from the Java preference window.
1.
Enter www.samsungsmartcam.com on the web browser’s address field.
Java-uninstalled PC
1)
Verify the Java version
• In the SmartCam Web service access page, make search for JAVA
Runtime Environment (hereinafter “JRE”) and check if your PC has installed
the recommended version of JRE 1.6.10 or later. If not, install the latest
version of JRE as recommended by the Company.
2)
not have Java installed on your computer, you will be asked to click on the
nn `` Iflinkyoutododownload
the Java plug-in and install. This process may take up to 10 minutes
Move to the Verify Java page
• If you agree to upgrade the current Java version for a PC installing JRE
version 1.6.10 or earlier or a PC not installing JRE yet, you will move to the
Java Verify page.
• If you have not installed Java yet, you will be prompted to install JRE with
a message.
3)
Start installing Java
depending on your internet connection speed.
03
Monitoring
product is designed to automatically install JAVA but, in many situations, if it is not
nn `` This
installed automatically, visit by www.java.com and follow the onscreen instructions to
install the product.
15
5)
Start the SmartCam Web service
PC having JRE 1.6 or earlier installed
1)
Verify the Java version
• In the SmartCam Web service access page, make search for JAVA
Runtime Environment (hereinafter “JRE”) and check if your PC has installed
the recommended version of JRE 1.6.10 or later. If not, install the latest
version of JRE as recommended by the Company.
• From the Verify Java page, click on the given button to check the Java
version.
• If you accept the installation of JRE, the installation process will start.
4)
Verify Certificate
• When JRE is installed completely, you will move to the SmartCam Web
page. And, you will be prompted to agree to run the application published
by Samsung Techwin Co., Ltd.
16 · English
2)
Verifying the Java version
3)
Check the JRE version of the current PC
• Search for the current version of JRE on the PC
• Check the current JRE version and download the latest version if necessary
( version 7 Update 4 as of 2012/05)
4)
Agree to install JRE
6)
Start installing Java
03
• Agree to install the latest version of JRE
Monitoring
5)
Move to the Verify Java page
• If you agree to upgrade the current Java version for a PC installing JRE
version 1.6.10 or earlier or a PC not installing JRE, you will move to the
Java Verify page.
• If you have not installed Java yet, you will be prompted to install JRE with a
message.
• If you accept the installation of JRE, the installation process will start.
17
7)
Verify Certificate
2.
Select to register.
After reading the terms of use, check on “I agree with”, and click .
3.
Provide the requested information, and click .
• M
ove to the SmartCam Web page (www.samsungsmartcam.com), and
you will be prompted to agree to run the application published by
Samsung Techwin Co., Ltd.
8)
Start the SmartCam Web service
• ID : Enter the user ID and perform the duplicate check.
Fill in the user ID in 8 ~ 12 alphanumeric characters.
• Password : For security reason, provide the user password in 8 ~ 12
alphanumeric characters.
• Confirm Password : Please enter the password again for confirmation.
• Name : Enter the user name.
• E-mail : Enter the correct email address as it is used for reference in case
you forgot the user ID or password.
• Nation : Please select your country.
18 · English
4.
Enter the and click the check.
7.
When done, click .
SAMSUNG SMARTCAM
MODEL : SNH-1011N
DC 5. OV
2. 2A
M/C : SNH-1011N/US
PV
Apr 2012 S/N : XXXXXXXXXXXXXXX
MAC ADDRESS. : XX-XX-XX-XX-XX-XX
SAMSUNG TECHWIN CO., LTD.
MADE BY SAMSUNG IN CHINA
5.
Create a .
nn `` If you want to change the private Key, please refer to on page 25.
8.
nn `` Private key is required to prevent unauthorized access to the camera.
``
6.
You can use one to eight length strings of letters, numbers, and characters except ‘-’
and ‘,’.
Create a .
XXXXXXXXXXXXXXX
• Camera Name : You can provide the camera name to your preference for
identification in the multi-camera network. (ex: Living room, Kitchen...)
can use one to fifteen length string of letters, numbers, and characters
nn `` You
‘~`!@#$%^&*()_-|{}[];’,./?’.
19
Monitoring
Once the camera is successfully registered, you can check the camera in the
.
03
Live Video
1.
From the , select the camera to monitor and click <
3.
When done, click .
4.
Select
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.7
Linearized : No
Create Date : 2012:06:05 10:21:46+09:00
Author : Dell
Modify Date : 2012:06:19 22:31:52+09:00
Page Mode : UseNone
XMP Toolkit : 3.1-701
Producer : Gaaiho PDF
Creator Tool : Microsoft Word - Appendix 4. Block Diagram
Title : Microsoft Word - Appendix 4. Block Diagram
Creator : Dell
Has XFA : No
Page Count : 35
EXIF Metadata provided by EXIF.tools