HeathCo WLTX204 Wireless Doorbell extender Kit User Manual 208196 01A

HeathCo LLC Wireless Doorbell extender Kit 208196 01A

User Manual

THANK YOUWe appreciate the trust and condence you have placed in Hampton Bay through the purchase of this wireless doorbell extender kit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!DRAFT COPYUSE AND CARE GUIDEWIRELESS DOORBELL EXTENDER KITQuestions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday1-844-760-3644HAMPTONBAY.COMIllustrations may vary from actual unit.Item #0000000000Model #HB-7902-02
2Table of ContentsTable of Contents ......................................2Safety Information ....................................2Warranty ...................................................23-Year Limited Warranty ........................2Pre-Installation .........................................3Planning Installation ..............................3Specications ........................................3Tools Required .......................................3Hardware Included .................................3Package Contents ..................................4Installation ................................................4Operation...................................................6Care and Cleaning ....................................7Troubleshooting ........................................8Safety InformationPRECAUTIONS ƑPlease read and understand this entire manual before attempting to assemble, install, or operate this doorbell. ƑAll electrical work must be in accordance with national and local electrical codes. If in doubt, consult a qualied electrician.WARNING: To prevent possible SERIOUS INJURY or DEATH never allow small children near batteries. If battery is swallowed, immediately notify a doctor.WARNING: Risk of re. Do not plug the doorbell into a power inverter.NOTE: The doorbell extender and doorbell come synced from the factory. The range of the wireless doorbell can vary with location, temperature, and battery condition.This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The user is cautioned that changes or modications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.Warranty3-YEAR LIMITED WARRANTYWHAT IS COVEREDThis product is guaranteed to be free of factory defective parts and workmanship for a period of 3 years from date of purchase. Purchase receipt is required for all warranty claims.WHAT IS NOT COVEREDThis warranty does not include expendable items (such as light bulbs, batteries, etc.), repair service, adjustment and calibration due to misuse, abuse or negligence. Unauthorized service or modication of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty is not extended to other equipment and components that a customer uses in conjunction with this product.Contact the Customer Service Team at 1-844-760-3644 or visit www.hamptonbay.com.
3 HAMPTONBAY.com Please contact 1-844-760-3644 for further assistance.Pre-InstallationPLANNING INSTALLATIONBefore installing the wireless doorbell extender kit, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this wireless doorbell extender kit.Estimated installation time: 30 minutesSPECIFICATIONSDoorbell Doorbell extenderPower requirements 120 VAC, 60 Hz 4x - “AAA” batteries (not included)TOOLS REQUIREDPhillips screwdriverSmall athead screwdriver Drill1/16" (1.5 mm) Drill bitSafety goggles7/32" (5.5 mm) Drill bitHARDWARE INCLUDEDNOTE: Hardware shown to actual size. AA BB CCPart Description QuantityAA Jumper 1BB Screw 2CC Wall anchor 2DD Double-sided tape 2DD
4Pre-Installation (continued)PACKAGE CONTENTS Part Description QuantityA Doorbell 1B Doorbell extender 1Installation1 Installing the doorbell ƑPlug in the doorbell (A) at the desired location.2 Installing the batteries into the doorbell extender ƑOpen the doorbell extender (B) by pressing on the cover with your thumb and sliding the cover off. ƑInstall four alkaline “AAA” batteries (not included) into the doorbell extender (B). Ensure the batteries are oriented properly.ABBA
5 HAMPTONBAY.com Please contact 1-844-760-3644 for further assistance.Installation (continued)3 Testing the doorbell extender and doorbell range ƑTest the range by temporarily positioning the doorbell extender (B) next to the existing doorbell. ƑPress the “TEST” button inside the doorbell extender (B). ƑVerify the red LED on the doorbell extender (B) ashes momentarily and the doorbell (A) sounds. ƑIf the doorbell does not sound, move the doorbell closer to the doorbell extender and test again.NOTE: Do not permanently mount the doorbell extender until the doorbell and doorbell extender are working properly.4 Testing the doorbell extender function ƑTo test the function, keep the doorbell extender (B) next to the existing doorbell and activate the existing doorbell. If the doorbell (A) sounds, the system is working correctly.5 Making adjustments to the doorbell extender ƑIf the doorbell does not sound, try one or more of the following steps: ƑTurn the microphone sensitivity knob (1) inside the doorbell extender (B) clockwise to increase microphone sensitivity. ƑMove the doorbell extender (B) to different positions around the existing doorbell. ƑRemove the microphone (2) from the doorbell extender (B) by gently prying the microphone (2) out of the doorbell extender (B) and routing the wires through the small slot (3) in the doorbell extender (B). Attach the microphone (2) to the existing doorbell using double-sided tape(CC).NOTE: Do not mount the microphone (2) to doorbell bars and make sure the small hole in the microphone (2) is not covered with double-sided tape (DD). ƑOnce the doorbell (A) and doorbell extender (B) are working correctly, reduce the microphone sensitivity (1) to the least sensitive position that allows for reliable activation to minimize false activation from other household noises.AABBB213BB
6Installation (continued)6 Mounting the doorbell extenderUse either the screws (BB) or double-sided tape (DD) to mount the doorbell extender (B). ƑTo mount with screws (AA), temporarily remove the batteries and place the doorbell extender (B) against the mounting surface and mark the two screw holes. ƑDrill two 7/32 in. pilot holes and insert wall anchors (CC). Align the holes in the doorbell extender (B) with the wall anchors (CC) and insert two screws (BB). Tighten securely and replace the batteries and cover. ƑWhen attaching the doorbell extender (B) with double-sided tape (DD), remove the paper from both sides of the double-sided tape (DD) and apply to a clean surface. Install the cover.Operation1 Adjusting the doorbell volumeThe doorbell (A) has an adjustable volume control located on the side. Rotate the thumbwheel up or down to adjust the volume.2 Setting the doorbell extenderThe wireless doorbell extender (B) has two options for tune selection: Play the selected “FRONT” door musical tune or play the “REAR” door designated tune (Ding). ƑRemove the single jumper inside the doorbell extender (B) to play the selected musical tune. ƑAdd the single jumper inside the doorbell extender(B) to play only the Ding tune. Remove jumper to Add jumper to set set as the “FRONT” door as the “REAR” door BDDBBAB
7 HAMPTONBAY.com Please contact 1-844-760-3644 for further assistance.Operation (continued)3 Selecting the doorbell extender tuneThe doorbell (A) has different selectable tunes. If the doorbell extender (B) is set to the “REAR” tune it will only play the Ding (one note) tune. If the doorbell extender (B) is set to the “FRONT” tune it will play either the Ding-Dong (two note) tune or Westminster (eight note) tune. ƑPress and release the “TUNE” button on the doorbell (A) until the desired tune is heard.NOTE: All doorbell models are designed to work with up to 10 wireless push buttons (sold separately).NOTE: All doorbells are designed to play only two different tunes no matter how many push buttons are used.4 Adding wireless push buttonsNOTE: Wireless push buttons can be added to this doorbell. The push buttons are sold separately.See the owner’s manual of the push button accessory for instructions to sync with this doorbell.5 Selecting a push button tuneThe doorbell (A) has different selectable tunes for push buttons (sold separately). The push button set as the “REAR” push button will only play Ding (one note tune). The push button set as the “FRONT” push button will play either the Ding-Dong (two note tune) or Westminster (eight note tune) tune. ƑPress and release the “TUNE” button on the doorbell (A) until the desired tune is heard.NOTE: All doorbell models are designed to work with up to 10 wireless push buttons (sold separately).NOTE: All doorbells are designed to play only two different tunes no matter how many push buttons are used.Front door push button(sold separately)Rear door push button(sold separately)Doorbell tune Ding-Dong or Westminster Ding Care and Cleaning ƑUse a dry cloth to clean the doorbell and doorbell extender. ƑDo not use cleaners or polishes. ƑDo not use any uids on the doorbell or doorbell extender.AA
8TroubleshootingProblem Possible Cause SolutionThe doorbell does not sound. ƑThe batteries are not installed correctly. ƑMake sure the batteries are installed according to the diagram inside the doorbell extender. ƑThe batteries are dead. ƑCheck the charge of the doorbell extender batteries and replace if necessary. ƑThe doorbell is not receiving power. ƑMake sure the plug-in doorbell has power. ƑThe doorbell extender and doorbell are not synced. ƑSync the doorbell extender and doorbell: ƑRemove the doorbell extender cover. ƑPress and hold the button on the doorbell until the doorbell sounds “Beep-Beep”. ƑPress the button on the inside of the doorbell ex-tender within 30 seconds. The doorbell will sound a “Beep-Beep” tone to indicate the doorbell extender is synced. ƑPress the button inside the doorbell extender again to activate the doorbell and ensure the doorbell extender and doorbell are synced.
9 HAMPTONBAY.com Please contact 1-844-760-3644 for further assistance.Troubleshooting (continued)Problem Possible Cause SolutionThe batteries seem okay, but the doorbell does not work after installation. ƑThe doorbell or doorbell extender is mounted on metal or near metal studs. ƑMetal reduces transmission range. Use 1/4 in. to 1/2 in. (6 to 13 mm) wood shims to move the doorbell or doorbell extender away from the metal surface. ƑThe doorbell is mounted near a concrete oor or wall. ƑConcrete may reduce range. Move the doorbell away from the concrete surface. ƑThe doorbell and doorbell extender are installed too far apart. ƑLocate the doorbell closer to the doorbell extender.The doorbell sounds when not intended (false triggers). ƑThe doorbell is receiv-ing interference from another wireless device. ƑReset the doorbell extender and doorbell: ƑRemove the doorbell extender cover. ƑRemove doorbell extender battery. Wait 30 seconds. ƑPress and hold the button inside the doorbell ex-tender for 10 to 15 seconds within 60 seconds after installing battery into the doorbell extender. ƑPress and hold the button on the doorbell until the doorbell sounds a “Beep-Beep-Beep-Beep”. ƑRe-sync the doorbell extender and doorbell: ƑPress and hold the button on the doorbell until the doorbell sounds “Beep-Beep”. ƑPress the button on the inside of the doorbell ex-tender within 30 seconds. The doorbell will sound a “Beep-Beep” tone to indicate the doorbell extender is synced. ƑPress the button inside the doorbell extender again to activate the doorbell and ensure the doorbell extender and doorbell are synced. ƑDoorbell extender is detecting loud, continu-ous noise levels. ƑTurn the microphone sensitivity dial counterclockwise to reduce sensitivity or attach the doorbell extender microphone directly to the existing doorbell case near the ringing part (but not on it).
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday1-844-760-3644HAMPTONBAY.COMRetain this manual for future use.208196-01A

Navigation menu