HeathCo WLTX204 Wireless Doorbell extender Kit User Manual 208196 01A

Download:
Mirror Download [FCC.gov]
Document ID	2684438
Application ID	CyygCd2apXYAAu/Hwt7+HQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.36kB (141987 bits)
Date Submitted	2015-07-20 00:00:00
Date Available	2015-07-20 00:00:00
Creation Date	2015-05-04 14:04:50
Producing Software	Acrobat Distiller 9.5.5 (Windows)
Document Lastmod	2015-05-04 14:04:50
Document Title	208196-01A.pdf
Document Creator	Adobe InDesign CS6 (Macintosh)
Document Author:	KPeterson

Item #0000000000
Model #HB-7902-02
USE AND CARE GUIDE
FT
WIRELESS DOORBELL EXTENDER KIT
Questions, problems, missing parts?
Before returning to the store, call Hampton Bay Customer Service
8 a.m. - 5 p.m., CST, Monday - Friday
1-844-760-3644
HAMPTONBAY.COM
Illustrations may vary from actual unit.
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this wireless
doorbell extender kit. We strive to continually create quality products designed to enhance your home. Visit us online
to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Table of Contents
Tools Required .......................................3
Hardware Included.................................3
Package Contents ..................................4
Installation ................................................4
Operation...................................................6
Care and Cleaning ....................................7
Troubleshooting ........................................8
Table of Contents ......................................2
Safety Information ....................................2
Warranty ...................................................2
3-Year Limited Warranty ........................2
Pre-Installation .........................................3
Planning Installation ..............................3
Specifications ........................................3
Safety Information
PRECAUTIONS
Ƒ
Please read and understand this entire manual
before attempting to assemble, install, or operate
this doorbell.
Ƒ
All electrical work must be in accordance with
national and local electrical codes. If in doubt,
consult a qualified electrician.
NOTE: The doorbell extender and doorbell come synced
from the factory. The range of the wireless doorbell can
vary with location, temperature, and battery condition.
This device complies with Part 15 of the FCC Rules and
RSS-210 of Industry Canada. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
WARNING: To prevent possible SERIOUS INJURY or
DEATH never allow small children near batteries. If battery
is swallowed, immediately notify a doctor.
The user is cautioned that changes or modifications
not expressly approved by the party responsible for
regulatory compliance could void the user’s authority to
operate the equipment.
WARNING: Risk of fire. Do not plug the doorbell into a
power inverter.
Warranty
3-YEAR LIMITED WARRANTY
WHAT IS COVERED
This product is guaranteed to be free of factory defective parts and workmanship for a period of 3 years from date
of purchase. Purchase receipt is required for all warranty claims.
WHAT IS NOT COVERED
This warranty does not include expendable items (such as light bulbs, batteries, etc.), repair service, adjustment
and calibration due to misuse, abuse or negligence. Unauthorized service or modification of the product or of any
furnished component will void this warranty in its entirety. This warranty does not include reimbursement for
inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges. This warranty
is not extended to other equipment and components that a customer uses in conjunction with this product.
Contact the Customer Service Team at 1-844-760-3644 or visit www.hamptonbay.com.
Pre-Installation
PLANNING INSTALLATION
Before installing the wireless doorbell extender kit, ensure that all parts are present. Compare parts with the
Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble,
install, or operate this wireless doorbell extender kit.
Estimated installation time: 30 minutes
SPECIFICATIONS
Power requirements
Doorbell
Doorbell extender
120 VAC, 60 Hz
4x - “AAA” batteries (not included)
TOOLS REQUIRED
Phillips
screwdriver
Small flathead
screwdriver
1/16"
(1.5 mm)
Drill bit
Drill
7/32"
(5.5 mm)
Drill bit
Safety goggles
HARDWARE INCLUDED
NOTE: Hardware shown to actual size.
AA
BB
DD
CC
Part
Description
Quantity
AA
Jumper
BB
Screw
CC
Wall anchor
DD
Double-sided tape
HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
Part
Description
Quantity
Doorbell
Doorbell extender
Installation
1 Installing the doorbell
Ƒ
Plug in the doorbell (A) at the desired location.
Installing the batteries into the
doorbell extender
Ƒ
Open the doorbell extender (B) by pressing
on the cover with your thumb and sliding the
cover off.
Install four alkaline “AAA” batteries (not
included) into the doorbell extender (B). Ensure
the batteries are oriented properly.
Ƒ
Installation (continued)
the doorbell extender
3 Testing
and doorbell range
Ƒ
Ƒ
Ƒ
Ƒ
NOTE: Do not permanently mount the doorbell extender
until the doorbell and doorbell extender are working
properly.
Test the range by temporarily positioning
the doorbell extender (B) next to the existing
doorbell.
Press the “TEST” button inside the doorbell
extender (B).
Verify the red LED on the doorbell extender
(B) flashes momentarily and the doorbell (A)
sounds.
If the doorbell does not sound, move the
doorbell closer to the doorbell extender and test
again.
the doorbell extender
4 Testing
function
Ƒ
To test the function, keep the doorbell extender
(B) next to the existing doorbell and activate
the existing doorbell. If the doorbell (A) sounds,
the system is working correctly.
adjustments to the
5 Making
doorbell extender
Ƒ
Ƒ
If the doorbell does not sound, try one or more
of the following steps:
Ƒ Turn the microphone sensitivity knob (1)
inside the doorbell extender (B) clockwise
to increase microphone sensitivity.
Ƒ
Move the doorbell extender (B) to different
positions around the existing doorbell.
Ƒ
Remove the microphone (2) from the
doorbell extender (B) by gently prying
the microphone (2) out of the doorbell
extender (B) and routing the wires through
the small slot (3) in the doorbell extender
(B). Attach the microphone (2) to the
existing doorbell using double-sided
tape (CC).
Once the doorbell (A) and doorbell extender (B)
are working correctly, reduce the microphone
sensitivity (1) to the least sensitive position
that allows for reliable activation to minimize
false activation from other household noises.
NOTE: Do not mount the microphone (2) to doorbell bars
and make sure the small hole in the microphone (2) is not
covered with double-sided tape (DD).
HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Installation (continued)
6 Mounting the doorbell extender
Use either the screws (BB) or double-sided tape (DD)
to mount the doorbell extender (B).
Ƒ
Ƒ
Ƒ
BB
To mount with screws (AA), temporarily remove
the batteries and place the doorbell extender
(B) against the mounting surface and mark the
two screw holes.
Drill two 7/32 in. pilot holes and insert wall
anchors (CC). Align the holes in the doorbell
extender (B) with the wall anchors (CC) and
insert two screws (BB). Tighten securely and
replace the batteries and cover.
When attaching the doorbell extender (B) with
double-sided tape (DD), remove the paper from
both sides of the double-sided tape (DD) and
apply to a clean surface. Install the cover.
DD
Operation
1 Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control
located on the side. Rotate the thumbwheel up or
down to adjust the volume.
2 Setting the doorbell extender
The wireless doorbell extender (B) has two options
for tune selection: Play the selected “FRONT” door
musical tune or play the “REAR” door designated tune
(Ding).
Ƒ
Ƒ
Remove jumper to
set as the “FRONT” door
Remove the single jumper inside the doorbell
extender (B) to play the selected musical tune.
Add the single jumper inside the doorbell
extender (B) to play only the Ding tune.
Add jumper to set
as the “REAR” door
Operation (continued)
the doorbell extender
3 Selecting
tune
NOTE: All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
The doorbell (A) has different selectable tunes. If the
doorbell extender (B) is set to the “REAR” tune it will
only play the Ding (one note) tune. If the doorbell
extender (B) is set to the “FRONT” tune it will play
either the Ding-Dong (two note) tune or Westminster
(eight note) tune.
Ƒ
Press and release the “TUNE” button on the
doorbell (A) until the desired tune is heard.
NOTE: All doorbell models are designed to work with up
to 10 wireless push buttons (sold separately).
4 Adding wireless push buttons
See the owner’s manual of the push button accessory
for instructions to sync with this doorbell.
NOTE: Wireless push buttons can be added to this
doorbell. The push buttons are sold separately.
5 Selecting a push button tune
NOTE: All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
The doorbell (A) has different selectable tunes for
push buttons (sold separately). The push button set
as the “REAR” push button will only play Ding (one
note tune). The push button set as the “FRONT” push
button will play either the Ding-Dong (two note tune)
or Westminster (eight note tune) tune.
Ƒ
Press and release the “TUNE” button on the
doorbell (A) until the desired tune is heard.
NOTE: All doorbell models are designed to work with up
to 10 wireless push buttons (sold separately).
Front door push button
(sold separately)
Doorbell tune
Ding-Dong or Westminster
Rear door push button
(sold separately)
Ding
Care and Cleaning
Ƒ
Use a dry cloth to clean the doorbell and doorbell extender.
Ƒ
Do not use cleaners or polishes.
Ƒ
Do not use any fluids on the doorbell or doorbell extender.
HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Troubleshooting
Problem
Possible Cause
Solution
The doorbell does
not sound.
Ƒ
The batteries are not
installed correctly.
Ƒ
Make sure the batteries are installed according to the
diagram inside the doorbell extender.
Ƒ
The batteries are dead.
Ƒ
Check the charge of the doorbell extender batteries and
replace if necessary.
Ƒ
The doorbell is not
receiving power.
Ƒ
Make sure the plug-in doorbell has power.
Ƒ
The doorbell extender
and doorbell are not
synced.
Ƒ
Sync the doorbell extender and doorbell:
Ƒ
Ƒ
Ƒ
Ƒ
Remove the doorbell extender cover.
Press and hold the button on the doorbell until the
doorbell sounds “Beep-Beep”.
Press the button on the inside of the doorbell extender within 30 seconds. The doorbell will sound a
“Beep-Beep” tone to indicate the doorbell extender
is synced.
Press the button inside the doorbell extender again
to activate the doorbell and ensure the doorbell
extender and doorbell are synced.
Troubleshooting (continued)
Problem
Possible Cause
Solution
The batteries
seem okay, but
the doorbell does
not work after
installation.
Ƒ
The doorbell or doorbell
extender is mounted
on metal or near metal
studs.
Ƒ
Metal reduces transmission range. Use 1/4 in. to 1/2
in. (6 to 13 mm) wood shims to move the doorbell or
doorbell extender away from the metal surface.
Ƒ
The doorbell is mounted
near a concrete floor
or wall.
Ƒ
Concrete may reduce range. Move the doorbell away
from the concrete surface.
Ƒ
The doorbell and
doorbell extender are
installed too far apart.
Ƒ
Locate the doorbell closer to the doorbell extender.
Ƒ
The doorbell is receiving interference from
another wireless device.
Ƒ
Reset the doorbell extender and doorbell:
The doorbell
sounds when not
intended (false
triggers).
Ƒ
Ƒ
Ƒ
Ƒ
Remove the doorbell extender cover.
Remove doorbell extender battery. Wait 30 seconds.
Press and hold the button inside the doorbell extender for 10 to 15 seconds within 60 seconds after
installing battery into the doorbell extender.
Ƒ Press and hold the button on the doorbell until the
doorbell sounds a “Beep-Beep-Beep-Beep”.
Re-sync the doorbell extender and doorbell:
Ƒ
Ƒ
Ƒ
Ƒ
Doorbell extender is
detecting loud, continuous noise levels.
Ƒ
Press and hold the button on the doorbell until the
doorbell sounds “Beep-Beep”.
Press the button on the inside of the doorbell extender within 30 seconds. The doorbell will sound a
“Beep-Beep” tone to indicate the doorbell extender
is synced.
Press the button inside the doorbell extender again
to activate the doorbell and ensure the doorbell
extender and doorbell are synced.
Turn the microphone sensitivity dial counterclockwise
to reduce sensitivity or attach the doorbell extender
microphone directly to the existing doorbell case near
the ringing part (but not on it).
HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Questions, problems, missing parts?
Before returning to the store, call Hampton Bay Customer Service
8 a.m. - 5 p.m., CST, Monday - Friday
1-844-760-3644
HAMPTONBAY.COM
Retain this manual for future use.
208196-01A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : KPeterson
Create Date                     : 2015:05:04 14:04:50-05:00
Modify Date                     : 2015:05:04 14:04:50-05:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2015:05:04 13:36:50-05:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:8c0a1078-45e1-4eb7-a627-18839ce7c4dd
Original Document ID            : xmp.did:4B0D96F99873E01196A0E7EE2F4866E3
Document ID                     : xmp.id:B742886D32206811822A9D46523A72CD
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:608697030B206811822AA17115193210
Derived From Document ID        : xmp.did:CC47069C2120681188C6BFDD4D32DD55
Derived From Original Document ID: xmp.did:4B0D96F99873E01196A0E7EE2F4866E3
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:05:04 13:36:47-05:00
Format                          : application/pdf
Creator                         : KPeterson
Title                           : 208196-01A.pdf
Producer                        : Acrobat Distiller 9.5.5 (Windows)
Trapped                         : False
Page Count                      : 10

EXIF Metadata provided by EXIF.tools