Heng Ke Metal Works VS17R Slim Wireless Vehicle Weighing System User Manual BluetoothVersion x

Download:
Mirror Download [FCC.gov]
Document ID	3558426
Application ID	xdYfQlZT4rFV0mNmjFXpZQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.69kB (296158 bits)
Date Submitted	2017-09-13 00:00:00
Date Available	2017-09-13 00:00:00
Creation Date	2017-09-06 09:55:04
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2017-09-06 09:55:04
Document Title	Microsoft Word - BluetoothVersion User Manual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Wireless Vehicle Scale (p/n)
Main features and parts
1. Four battery‐powered weighing pads and LCD display unit, version 2.0.
2. Each weighing pad has a capacity of 1750 lbs (795 kg).
3. LCD display operate with 4 AA batteries (included).
4. Weighing pads each operate with 2 AA batteries (included).
5. LCD display indicates percentage (%) weight of each wheel relative to the total
vehicle weight.
6. LCD display indicates:
a. Cross weight percentage loads
b. Side to Side weight percentage loads
c. Front to Rear weight percentage loads.
7. Display measures in lb or kg for each wheel and the total vehicle weight.
8. LCD display indicates battery level for pads and LCD display.
9. All information is shown on one LCD screen.
10. Pads not on will be displayed as OFF in LCD Display box.
11. Batteries power level indicator for display box itself and each individual pad.
12. Scale pads and LCD display box fit into a hard trolley case.
13. USB port is used for sample update software use, no charging and data transmission
function
Scale pad battery
level indicator
FR weight
Display box battery
level indicator
FL weight
FL percentage
weight
FR percentage
weight
RL
weight
RR weight
RR percentage
weight
RL percentage
weight
Wireless signal
indicator
Total
weight
LCD display format
Display box battery level
indicator
ON/OFF
Tare
Function
Backlight Toggle
LCD display unit power on screen
Operating instructions.
1. Open the LCD display box, insert 4 AA batteries into the battery pack.
2. Open the battery door of each weighing pad and insert 2 AA batteries into the weighing
pad’s battery box.
3. Make sure each power switch of the 4 weighing pads are switched to ON position
4. Make sure that the correct pad is positioned in front of the corresponding wheel: FR, FL, RR,
and RL ‐ Front Right, Front Left, Rear Right, and Rear Left. The handle of each weighing pad
should be pointing outward to the side of the car.
5. Power on the LCD display by pressing the “On/Off” button. Each pads should all be lit up.
Wait until the weight readings all show zero or press the “Zero” button to zero. Press
“Function” to toggle between lb and kg.
6. The battery power indicator represents the amount of battery life available in 3 levels. If
the display shows only the battery outline, replace the AA batteries accordingly.
7. Carefully drive the vehicle up and let the respective center of the pad under and as align
as possible with the center of the tire. Never press “Zero” if the vehicle is on the pads
otherwise the vehicle has to be removed and the scale must be zeroed again.
8. While the car is on the pads. Shake each of the corners of the car up and down to relieve
any residual stress or friction within the chassis.
9. The car total weight, individual weight of each wheel load as well as its percentage to
the total weight will be shown at once.(Screen #1)
10. Press and hold the “Function” key with one finger, press the “Zero” key once. The
display passes to Screen #2, and gives you the total Front and Rear weight percentages.
Press the “Zero” key again for Screen #3, which gives you the total Left and Right weight
in percentages. Press the “Zero” key for Screen #4, which gives you the Cross weight of
(LF) Left Front, and (RR) Rear Right percentage. Press the “Zero” key again for Screen #5,
which displays the Cross weight of (RF) Right Front, and (LR) Left Rear percentage.
11. Press ON/OFF to power off the unit.
12. Switch the key on each pad to turn off the pads. Make sure the LED lights are all off.
13. USB port is used for sample update software use, no charging and data transmission
function
Screen #1
Screen #2
Fr :Front weight percent
Rr :Rear weight percent
Lt :Left total percent
Screen #3
Rt: Right total percent
Cross Left Front, Right Rear percent
Screen #4
Cross Right Front, Left Rear percent
Screen #5
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency exposure limits, Human proximity to the antenna shall not
be less than 20cm (8 inches) during normal operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may casue harmful interference to radio communications,
However, there is no guarantee that interference will not occur in a particular
installation. If the equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2017:09:06 09:55:04+08:00
Modify Date                     : 2017:09:06 09:55:04+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - BluetoothVersion User Manual.docx
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:46512527-4d5a-46d0-a6b6-93bf9b8d8a10
Instance ID                     : uuid:161c8594-7d16-46db-9863-df67b4c8d1c8
Page Count                      : 6

EXIF Metadata provided by EXIF.tools