Hisense Electric LCDC0008 Part15 Subpart B-LCD TV User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1514946
Application ID	u/eKpAUvXNpJPbxpb43cGw==
Document Description	W9HLCDC0008_User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	283.18kB (3539712 bits)
Date Submitted	2011-08-02 00:00:00
Date Available	2011-08-03 00:00:00
Creation Date	2011-07-29 16:45:53
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2011-07-29 16:46:00
Document Title	untitled
Document Creator	Adobe Illustrator CS3
Document Author:	songdan

Innovation for life
ES-
HOSPITALITY LCD TELEVISION
MODEL NO. LHD32V77MH
ii
Important safety instructions
Warnings
Cautions
Accessories
Installing and removing the stand
Installing the stand
Attaching the TV to the desk
Removing the stand
Installing a wall-mount bracket
TV components
Front and side controls
Back connections
Remote control
Using the remote control
Installing remote control batteries
Aiming the remote control
Making connections
Connecting the power
Selecting a location
Connecting an HDMI device
Connecting a component video device
Connecting an antenna,cable TV,or satellite TV box
Connecting a VCR, camcorder, or game console
Connecting a computer
Connecting a home theater system
Connecting headphones
Understanding the basics
Turning your TV on or off
Selecting the video input source
Selecting a channel
Adjusting the volume
Displaying program information
Navigating the menus
On-screen menu overview
Adjusting the picture
Choosing the display format (aspect ratio)
Adjusting the sound
Selecting the audio mode
Changing channel settings
Adjusting Power settings
Adjusting the TV settings
Troubleshooting
Video and audio
Remote control
General
Maintenance
Cleaning
Specifications
Legal notices
Adjusting hotel settings
10
10
10
12
12
12
12
13
14
14
15
15
15
15
16
16
16
16
17
LHD32V77MH
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers,
chests, or carts may fall over and cause injury.
Tune into safety
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions for
proper use of this product.
Don’t let children climb on or play with entertainment system
furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
Remember that children can become excited while watching
a program, especially on a “larger-than-life” TV. Make sure
that you place or install the TV where it cannot be pushed,
pulled over, or knocked down.
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your
TV and that has been recommended by this TV manufacturer, listed in this manual, or
otherwise listed by an independent laboratory as suitable for your TV.
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be mounted
to walls backed with steel studs or cinder blocks. If you are
unsure, ask a professional installer.
TVs can be heavy. At least two people are required for safe wall mount installation.
2
LHD32V77MH
Important safety instructions
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat
produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the
your outlet, consult an electrician for replacement of the obsolete
outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11
12 Use only with a cart, stand, tripod, bracket, or
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to S3125A
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused
for long periods of time.
14
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
15 The wall plug is the disconnecting device. The plug must remain
readily operable.
16 An apparatus with a three-prong, grounding-type plug is a Class I
apparatus, which needs to be grounded to prevent possible
electric shock. Make sure that you connect this Class I television
to a grounding-type, three-prong outlet.
17 Remote control batteries should not be exposed to excessive heat
Important safety instructions
18 The apparatus should not be exposed to dripping or splashing,
on the apparatus.
Warnings
Electric shock hazard
ric shock, do not remove any cover or
expose the device to rain or moisture. No user-serviceable parts are
Lightning
For added protection for your device receiver during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any antenna or cable
system. This helps prevent property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
Handling the LCD panel
Your TV’s screen is made of glass. Do not drop your TV or hit, jolt,
or press hard against the LCD panel. If the screen breaks, be
careful of broken glass.
If the LCD panel is broken, make absolutely sure that you do not
If the liquid gets in your mouth, immediately gargle, rinse, and
consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at
least 15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure that the service
have the same characteristics as the original part. Unauthorized
hazards.
Safety check
After completing any service or repair to this device, ask the service
technician to perform routine safety checks to determine that your TV is
in correct operating condition.
Power source
Operate your TV only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your
home, consult an electrician or your local power company.
Installing and removing the stand
LHD32V77MH
Cautions
Damage requiring service
Unplug this TV from the power outl
service personnel under the following conditions:
When the power supply cord or plug is damaged or frayed.
If liquid has been spilled or objects have fallen into your TV.
If your TV has been exposed to rain or water.
If your TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions because incorrect adjustment of other
controls may result in damage and will often require extensive
nician to restore your TV to its normal
operation.
If your TV has been dropped or damaged in any way.
When your TV exhibits a distinct change in performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your TV, make sure
that the antenna or cable system is grounded to provide some
protection against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA No. 70, provides
information with respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of the
antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
Condensation may also form during the summer if the TV is exposed to
the breeze from an air conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and sound, operating
problems, or even damage, keep your cordless and cellular telephones
away from the TV.
End of life directives
small amount of mercury. Disposal of these materials may be regulated
for environmental reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling information, contact your
local authorities or the Electronic Industries Alliance at www.eia.org to
Non-active pixels
provide exceptionally sharp video quality. Occasionally, a few
of your TV, and are not considered defects.
Accessories
Make sure the following accessories are included in the box with your
TV:
Remote control
AC power cord
AAA batteries (2)
Stand
Quick Setup Guide
Installing and removing the
stand
Antenna lead-in wire
Grounding clamp
Antenna discharge unit
Grounding conductors
Warning: Before attampting assembly or removal of the stand, unplug
the AC power cord.
Ground clamps
Cautions:
Power service grounding electrode
system
Electric service equipment
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides
it states that the cable
ground must be connected to the grounding system of the building as
close to the point of cable entry as practical.
Condensation
Moisture will form on the TV if the TV is brought from cool surroundings
into a warm room or if the temperature of the room rises suddenly.
When this happens, the TV's performance may be impaired. To prevent
this, let the TV stand in its new surroundings for about an hour before
switching it on, or make sure that the room temperature rises gradually.
You must install your TV into the stand in order for it to stand upright on
or other vertical surface, you must remove the stand .
Read these instructions carefully before you try to assemble the stand
or remove the stand .
Make sure that you handle the TV carefully when attempting to
assemble or remove the stand. If you are not sure of your ability to do
this, contact a professional installer or service technician. Hisense is
not responsible for any damages or injuries that occur because of
mishandling or incorrect assembly.
Use a soft cushion or covering to prevent scratching or damage to the
TV screen or cabinet.
Installing the stand
Note
To install the stand:
1 Remove the stand from the box and place it on a table or bench.
4
LHD32V77MH
TV components
2 Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
3 Align the base with the TV, then secure the stand to the TV with
the 4 screws provided.
Installing a wall-mount bracket
If you want to attach the TV to a wall-mount bracket (not provided), you
Warning
only. To reduce the risk of hazards, do not perform any servicing other
than that contained in the operating instructions unless you are
To install a wall-mount bracket:
1 Lay your TV face down on a table or bench. Make sure that you
put down a soft cushion or cloth so that your TV is not scratched.
2 Remove the pedestal stand. See “Removing the stand” above.
3 Secure the wall-mount bracket to the back of your TV using the
four screws provided with the bracket.
4 Carefully lift the TV into an upright position.
To remove the stand, see the following procedure.
Attaching the TV to a desk
The TV must be attached to desk so it cannot be pulled in a
forward/backward direction,potentially causing injury or
damaging the product.
Screws-M5×L(table depth + 8~10mm)
Example:Table depth - 15mm: Screws-M5×25
TV components
Front and side controls
(90mm)
3.54inch
14.17inch(360mm)
4-Screws
Desk
NOTE:
Be sure to follow the instructions,in correct installation of the stand
(pedestal) may result in the TV falling over.
Removing the stand
You must remove the stand before you can wall-mount the TV.
Note
To remove the stand:
1 Lay the TV (screen down) on the edge of the table or bench. Make
sure that you put a soft cloth or cushion between the table or
bench and the TV.
2 Remove the 4 screws holding the stand to the TV, then remove
the stand.
Item Name
Description
Power indicator
The light shows whether the TV is on or standby
mode.
Remote control
sensor
Receives signals from the remote control.
Please do not block.
MENU
Display the onscreen display(OSD) or Exit to close
the OSD.
INPUT
Select the INPUT menu.
VOL / VOL
CH /CH
(power)
Volume adjusting bottom,to increase or
decrease the volume.
Channel selection bottom,to increase or
decrease the channel.
(standby mode).
TV components
LHD32V77MH
PC AUDIO
USB
Remote control
HDMI3
Back connections
INPUT
CCD
MTS/SAP
ASPECT
SLEEP
SOUND
PICTURE
INFO
GUIDE
VGA
PC
TV
MUTE
CH
VOL
DMP
MENU
EXIT
RJ12
COMP1
HDMI2
HDMI1
11
ENTER
COMP 2
PB
PR
VIDEO
HEADPHONE
ANT IN
SERVICE
DIGITAL
AUDIO OUT
Item Name
AUDIO OUT
AV
10
LAST
Description
Thise unit has standmd USB interface and can
be connected the standavd USB 1.1 and USB
2.0 udisks.
Connect an antenna or cable TV to this jack. For
more information.
Connect a RS-232C(serial port) cable to this jack,
then to an external control device(such as a
computer or A/V control system), to control the
TV functions externally.
USB
ANT IN jack
SERVICE
COMP1
COMP2
PC AUDIO jacks Connect a computer (audio and video) to these
VGA jack
jacks.
Connect an HDMI device to one of these jacks.
HDMI 1/2/3/4 For more information.
Connect a digital coaxial cable to this connector,
DIGITAL AUDIO then to a digital sound system. For more
OUT jack
information.
AUDIO OUT
Connect a audio cable to this connector.
AV jack
Connect a standard AV device, such as a
camcorder or game console, to these jacks.
10
(headphone)
jack
Plug headphones into this jack. For more
information.
RJ12
Connect a RJ-12 Cable to this jack, then to an
external control device(such as a computer or
A/V control system), to control theTV functions
externally.
11
EN-31205
Connect component video devices to these
jacks. For more information.
Item Name
Description
POWER
Press to turn on the TV or put the TV in standby
mode.
Caution: The TV continues to receive power
even in standby mode. Unplug the power cord
to disconnect power.
MTS/SAP
In analog TV mode, press to select STEREO,
SAP (secondary audio language), or MONO.
In digital TV mode (DTV), press to select the
audio track. For more information.
CCD
more information.
SOUND
Press to select the sound mode. You can select
standard , custon , music and clear voice.
PICTURE
VOL
/ VOL
Press to select the video mode. You can select
Standard Custom Vivid.Game Cinema and
Power Saver.
Press to increase or decrease the volume.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2011:07:29 16:46+08:00
Create Date                     : 2011:07:29 16:45:53+08:00
Metadata Date                   : 2011:07:29 16:46+08:00
Creator Tool                    : Adobe Illustrator CS3
Format                          : application/pdf
Title                           : untitled
Creator                         : songdan
Document ID                     : uuid:c3934966-d838-434c-a5c0-d87085b70a00
Instance ID                     : uuid:29ede704-f60f-462f-924d-187134b30a53
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Has XFA                         : No
Page Count                      : 7
For                             : ������,
Bounding Box                    : 0 0 596 842
Creator Version                 : 14
Container Version               : 9
Author                          : songdan
Image Height                    : 842
Image Width                     : 596
Image Size                      : 596x842
Megapixels                      : 0.502

EXIF Metadata provided by EXIF.tools