Hisense Electric LCDC0008 Part15 Subpart B-LCD TV User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1515031
Application ID	u/eKpAUvXNpJPbxpb43cGw==
Document Description	W9HLCDC0008_User Manual 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	272.79kB (3409846 bits)
Date Submitted	2011-08-02 00:00:00
Date Available	2011-08-03 00:00:00
Creation Date	2011-07-29 16:46:56
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2011-07-29 16:47:01
Document Title	untitled
Document Creator	Adobe Illustrator CS3
Document Author:	songdan

LHD32V77MH
Changing channel settings
Adjusting the Features
U.S. TV ratings (age-based)
These ratings are determined by the Federal
Communications Commission (FCC).
To change the channel settings:
In TV mode, you can adjust:
1 Press MENU. The Main menu opens.
2 Press or to highlight Features, then press ENTER or . The
TV menu opens.
Features
TV
Caption settings
>>>
Sleeptimer
TV-Y
All children.
TV-Y7
Suitable for children 7 and older.
TV-G
General audiences.
TV-PG
Parental guidance suggested.
TV-14
Parental guidance strongly suggested.
TV-MA
Mature audiences only.
Power on
>>>
Power off
>>>
V-Chip
>>>
Change PIN
>>>
FV
Fantasy violence.
Transpaerncy
Violence.
OSD Timeout
>>>
Sexual situations.
Strong language.
Suggestive dialog.
Move:
Enter:
U. S. TV ratings (content-based)
Exit:
OK
EXIT
3 Press or to highlight an option, then press ENTER or to access
the option, and press or to adjust the option. You can select:
Caption settings– Adjust Captioning settings.
Sleeptimer –Press [ / ] to set the sleep timer between
0-120minutes.
Power on–When “On”, you can set the time when the TV turns
on automatically. And Set the current time when the TV turns on.
Power off –When “On”, you can set the time when the TV turns
off automatically. And set the current time when the TV turns off.
V-Chip –Lock channels in Channel Manager, to prevent
unauthorized users, such aschildren, from watching unsuitable
programme. Available only when the Input source is set to TV.
Hotel Function
Function
V-Chip Lock
TV
TV
US TV Parental Guid...
Search
Lock
US
MPAA
Rating
Off
>>>
Off . Select
. Off . Select
User SaveEnglish
Canadian
Lock Rating
. Off . Select
Picture Lock
Canadian
French Rating
U.S. movie (MPAA) ratings
These ratings are determined by the Motion Picture
Association of America (MPAA).
General audiences.
PG
Parental guidance suggested.
PG-13
Suitable for children 13 and older.
Parental guidance suggested for children
under 17.
NC-17
Not suitable for children under 17.
Adults only.
Canadian English ratings
These ratings are based on the Canadian Home Video
Rating System, determined by the Canadian Motion
Picture Distributors Association (CMPDA).
Suitable for all children.
C8+
Suitable for children 8 and older.
General audiences.
Audio Lock
Off .
Features Lock
Off .
Installation Lock
Off .
PG
Parental guidance suggested.
DMP Lock
Off .
14+
Suitable for children 14 and older.
18+
Adults only.
Move:
Enter:
OK
13
Exit:
EXIT
Access to V-Chip Menu
Press the number buttons to enter the four-digit password. The
default password is 0532. The V-Chip menu opens.
Press or to highlight an option, then press ENTER or to access
the option. Press or to highlight a rating and press ENTER to
lock the rating and all other higher ratings or unlock the rating and
Program Block–
A–Rating Enable is on.
B–U.S. TV Ratings: You can choose TV ratings according
to the illustration on the screen.
C–The settings for U.S. Movie Ratings, Canada (English)
Ratings, and Canada (French) Ratings follow Step B. If
you want to block an unrated program, turn on this
function. You can select all the ratings listed in the
charts below.
Canadian French ratings
determined by La Régle du cinéma du Québec.
General audiences.
8 ans+
Suitable for children 8 and older.
13 ans+
Suitable for children 13 and older.
16 ans+
Suitable for children 16 and older.
18 ans+
Adults only.
Change PIN–Change the password of the V-Chip function.
Transpaerncy–Adjust the transparency of menu.
OSD Timeout –The time it takes the OSD to disappear when
no operations are performed. You can change it from Off, 5
seconds, 10seconds, and 30seconds.
14
LHD32V77MH
Changing channel settings
Adjusting the Installation
To change the channel settings:
In TV mode, you can adjust:
1 Press MENU. The Main menu opens.
2 Press or to highlight Installation, then press ENTER
or . The TV menu opens.
Installation
TV
Language
English
Channels
>>>
Time
>>>
Source Labels
>>>
Reset AV settings
Start now
Move:
Enter:
Exit:
OK
EXIT
3 Press or to highlight an option, then press ENTER or to access
the option, and press or to adjust the option. You can select:
Language –You can select the menu's language among
English, French and Spanish.
Channels –You can select the mode of RF input and
search the channels automatically.
Installation Channels
TV
Autoprogram
Start now
. Antenna
Installation mode
Move:
Enter:
OK
Exit:
EXIT
Time– Lets you set the exact time. You can setup
date,time,time zone and daylight saving.
Source Labels–Lets you name each input.
Reset AV settings –Change setting back to default.
(picture and sound only)
LHD32V77MH
Troubleshooting
15
Troubleshooting
Before calling for service, check the following information for possible
solutions to problems you may experience. If none of these solutions
Caution: Do not try to repair the TV yourself. Refer all servicing to
Video and audio
Problem
No picture (screen is not lit)
and no sound.
Problem
Solution
Remote control does not
work.
Make sure that the TV power cord
is plugged in.
Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
Make sure that the batteries are
installed correctly. For more
information, see “Installing
remote control batteries” on
page 6.
Replace the batteries. For more
information, see “Installing
remote control batteries” on
page 6.
Trouble programming your
existing universal remote
control.
See instructions and a table of
common codes in “Programming
a universal remote control to
work with your TV” on page 7.
Codes are subject to change. For
up to date codes, go to
www.dynexproducts.com.
Replace the batteries. For more
information, see “Installing
remote control batteries” on
page 6.
Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
Solution
Make sure that the power cord is
plugged in.
Press POWER on the TV or the
remote control.
Make sure that the correct video
input source is selected. For more
information, see “Selecting the
video input source” on page 9.
Try another channel. The station
may be experiencing problems.
Dark, poor, or no picture
(screen is lit), but sound is
good.
Adjust the brightness. For more
information, see “To adjust the
picture:” on page 12.
Make sure that the correct picture
mode is selected. For more
information, see “To adjust the
picture:” on page 12.
Make sure that the antenna or
cable TV is connected correctly
and securely. For more
information, see “Connecting an
antenna, cable TV, or satellite TV
box” on page 8.
No color, dark picture, or
color is not correct.
Adjust the color saturation. For
more information, see “Adjusting
the picture” on page 12.
Only snow (noise) appears
on the screen.
Try another channel. The station
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. For more
information, see “Connecting an
antenna, cable TV, or satellite TV
box” on page 8.
Dotted lines or stripes
appear on the screen.
Adjust the antenna.
Move the TV away from noise
sources such as cars, neon signs,
or hair dryers.
Double images.
Try using a highly directional
outdoor antenna or cable TV.
Problem
Remote control
Solution
The picture has a few bright
or dark spots.
A few bright or dark spots on an
LCD screen is normal. It does not
Good picture, but no
sound.
Make sure that the sound is not
muted.
Make sure that the sound mode is
set to Stereo or Mono. For more
information, see “Selecting the
audio mode” on page 12.
Audio noise.
Make sure that there is no
interference with infrared
equipment such as a cordless
telephone or headphones. Move
the infrared equipment away
from the TV to eliminate the
noise.
General
Problem
Solution
One or more channels do
not display.
Make sure that the channels are
not blocked. For more
information, see “Setting parental
controls” on page 13.
Password is lost.
Enter 0532 to access parental
controls, then set a new
password. For more information,
see “Setting parental controls” on
page 13.
Some settings cannot be
accessed.
If a setting is grayed, the setting is
not available in the current video
input mode.
TV cabinet creaks.
When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
Control buttons on the TV
do not work.
Disconnect the power cord, wait a
few seconds, then reconnect the
power cord and turn on the TV.
Note: If the problem is not solved by using these troubleshooting
16
LHD32V77MH
Maintenance
Just like with any other household appliance, the performance and
life-expectancy of your TV depends on how well you maintain it. Follow
the procedures described here to clean the TV case and the LCD screen.
Cautions:
disconnected from the power outlet before cleaning the TV.
Never spray or pour any liquid directly onto the screen or the case.
Cleaning
Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a small amount of
non-ammonia, non-alcohol-based, non-abrasive detergent
solution.
Clean the screen with a clean, soft, lint-free cloth. If additional
cleaning is necessary, apply a small amount of non-ammonia,
non-alcohol-based, non-abrasive detergent solution to the cloth.
Weight and dimensions shown are approximate.
TV type
TV panel
TV system
Receiving channels
Audio multiples
Audio out
Power requirement
Power consumption
Dimensions
(W × H × D with stand)
Weight
Input terminals
Output terminals
Control terminals
LCD
31.5-inch TFT LCD
NTSC-M, ATSC
VHF: 2 - 13
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1-135
DTV: 2-69
BTSC system
6Wx2
AC 120 V, 60 Hz
140 W (With Max backlight)
31.17 × 22.08 × 9.05 inches
(792 × 561 × 252 mm)
26.9 lbs. (12.2 kg)
Composite video/L and R audio (1)
Component video/L and R audio (2)
HDMI (3)
VGA/audio (1)
ANT/Cable In (1) USB(1)
Digital Coaxial Audio (1)
Headphone (1)
SERVICE PORT (2)
Specifications, Legal notices
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
that to which the receiver is connected.
Consult the dealer or an experienced technician for help.
FCC warning
responsible for compliance with the FCC Rules could void the user’s
authority to operate this equipment.
Cables
Connections to this device must be made with shielded cables with
metallic RF/EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003
du Canada.
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
HDMI
trademarks or registered trademarks of HDMI Licensing LCC.
LHDN32V88MH
Hotel Settings
17
Adjusting hotel settings
To adjust hotel settings:
1 Press MENU. The Main menu opens.
2 Press or to highlight SOUND, then press ENTER or , audio
menu opens. Press or to highlight balance, use or to
adjust to zero, then press the number buttons to enter the threedigit password 5 4 8. The Hotel Settings Menu opens.
Sound
TV
Sound mode
Standard
Equalizer
>>>
Balance
Move:
Enter:
OK
Exit:
Balance
EXIT
LOGO —Allows installer to choose one of three options. Choices
are OFF, HISENSE and WELCOME .
OFF : No logo when TV is turned on. TV goes directly to source.
HISENSE : Displays Hisense TV logo.
WELCame : Displays welcome logo.
Power On —Allows installer to select one of three options.
Choices are LAST, ON and Standby.
LAST : TV will return to whatere operation it was in before power
out.
ON : TV will turn on when power is restored.
Standby : TV will be activated but not turned on.
Basic Setting —Allows installer to active or disable basic settings.
ON : TV picture defaults to Normal viewing mode, Normal Audio
and Zoom Aspect is full screen.
OFF : Installer can go to User Save Lock and adjust settings.
FUNCTION Lock —Allows installer to lock the following functions.
Hotel
Function Lock
TV
KB Lock
Note: Please redo above step if fail when opening Hotel Settings Menu.
3 Press or to highlight an option, then press ENTER or to access
the option, press or to select a value and press ENTER to adjust
the option. You can select:
HOTEL MODE —Allows installer to active or disable hotel options.
On : Hotel options are active.
: Hotel options are disabled.
TV ON SETTING —Allows installer to set up of initial options each
time a guest turns TV on.
Hotel TV On Setting
TV
On Volume
Off
On Source
Last
Logo
HISENSE
Power On
Standby
Basic Seetting
Off
Move:
Enter:
OK
Exit:
EXIT
On Volume
In ON mode, ON VOLUME VALUE can be adjusted from 0 to 100.
On Source
Input options. Choises include antenna (TV ), AV, component
( ypbpr1, ypbpr2 ), HDMI1,HDMI2,HDMI3, and VGA.
LAST will remember previous input source.
TV on source will activate ON CHANNEL selection and ON
CHANNEL NUMBER.
On Channel Number —Allows installer to set up desired
channel when TV is turned on. If no desired channel is requested
ON CHANNEL
Off
Off
Search Lock
Off
User Save Lock
Off
Picture Lock
Off
Audio Lock
Off
Features Lock
Off
Installation Lock
Off
DMP Lock
Off
Move:
Enter:
OK
Exit:
EXIT
kB lock —Locks key pad.
OFF : Usable.
ON : Locked down (disabled).
Search Lock —Locks key pad.
OFF : Usable.
ON : Locked down (disabled).
User Save Lock —Locks hotel guest adjustment.
OFF : Menu features can be adjusted by hotel guest and be
remembered in TV memory.
ON
factory default settings.
Picture Lock —Locks Picture adjustments in menu.
OFF : Picture adjustments in menu are allowed by user.
ON : Locks all picture adjustments.
Audio Lock —Locks Audio adjustments in menu.
OFF : Audio adjustments in menu are allowed by user.
ON : Locks all audio adjustments except Balance.
18
LHDN32V88MH
Hotel Settings
Feature Lock —Locks Feature menu adjustment in menu.
Installation Lock—Locks Installation menu adjustment in menu.
DMP Lock —Locks DMP menu adjustment in menu.
V-Chip—Locks V-Chip function in menu.
Info Lock
OFF : Programing name and description (if available) are
displayed when info button on remote is touched. Programing
info may also be available depending on provider.
ON : No detail information on channel.
Hotel mute— Allows installer to mute TV speaker.
ON : TV is muted. User can not adjust volume.
OFF : TV is not muted. User can adjust volume.
Input Selection
OFF : Locked down (disabled).
ON : Usable.
MAX VOLUME —Allows installer to adjust max volume from 0 to 100.
The volume value can be input by digit-number buttons on remote.
MIN VOLUME —Allows installer to adjust minimum volume from 0 to 100.
The volume value can be input by digit-number buttons on remote.
AUTO Standby
OFF : TV will stay on with no signal.
ON : TV goes to Standby mode when there is no signal after 15 mimutes.
CHANNEL SETTINGS —Allows access to channel setting without exiting
hotel settings menu.
Program Guide Edit— In channel setting mode, Allows edit and
remapping and editing of channels available. Using the color keys
installer can change channel position and name.
Hotel
Channel Setting
TV
Digital
NO#
Page2/1
Name
PHY.
10
Rename:
Select:
23
23
23
23
17
29
45
57
69
69
Skip:
Copy:
Enter:
Program Skip
5-1
5-2
5-3
5-4
17
29
45
57
69-1
69-2
Delete:
OK
Swap:
Exit:
EXIT
CLONE
(copy) settings to any additional units you are installing.
A--- First plug in USB driver to unit that is already set up. (TV will show
USB found).
B--- Select READ OUT which brings up cloning function.
C--- Select YES to clone (copy). When complete, TV will show upload
success. Hotel Menu will close automatically.
CLONING OPTION 1.
A--- Plug in new TV.
B--- Plug in loaded USB drive.
C--- Turn TV on.
D--- On screen will acknowledge USB detected.
E--- Press menu.
F--- Key in numbers 2 5 6 6 3 on remote.
G--- Cloning option will appear on screen.
CLONING OPTION 2.
A--- Take loaded USB drive to next unit, plug in next installation
unit (You do not need to have sources connected).
B--- Plug in loaded USB drive.
C--- Turn TV on.
D--- Go to Menu.
E--- Go to Audio menu.
F--- Go to Balance. Use arrows to adjust to zero.
G--- Enter access code 548 with remote number key. Hotel menu
opens.
H--- Go to clone near bottom.
J--- Choose option Write In. Hit Enter on remote. Cloning option
will appear on screen.
k--- Select Yes. System will acknowledge download success. TV
will be cloned.
SSID setting—Set or reset SSID code for Pro:Idiom decording.
Set SSID —Enter new SSID code.
Reset SSID —Reset SSID code to factory default value.
yes : Reset to factory default code.
No : Maintain current settings.
SW Version—shows current software version information.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2011:07:29 16:47:01+08:00
Create Date                     : 2011:07:29 16:46:56+08:00
Metadata Date                   : 2011:07:29 16:47:01+08:00
Creator Tool                    : Adobe Illustrator CS3
Format                          : application/pdf
Title                           : untitled
Creator                         : songdan
Document ID                     : uuid:e1548c4f-73db-48a0-b6d2-6234a8a03683
Instance ID                     : uuid:f2f1e291-7018-4fce-8eed-a203f7651661
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Has XFA                         : No
Page Count                      : 7
For                             : ������,
Bounding Box                    : 0 -1 1222 842
Creator Version                 : 14
Container Version               : 9
Author                          : songdan

EXIF Metadata provided by EXIF.tools