Hisense Electric LCDC0008 Part15 Subpart B-LCD TV User Manual
Hisense Electric Co., Ltd. Part15 Subpart B-LCD TV
Contents
- 1. W9HLCDC0008_User Manual 1
- 2. W9HLCDC0008_User Manual 2
- 3. W9HLCDC0008_User Manual 3_Rev.1
- 4. W9HLCDC0008_User Manual 4
W9HLCDC0008_User Manual 3_Rev.1
Understanding the basics Connecting a home theater system Connecting using a digital audio cable RJ12 COMP1 LHD32V77MH PC VGA PC AUDIO HDMI3 USB To connect using a digital coaxial cable: 1 Make sure that your TV’s power cord is unplugged and the home 2 Connect one end of a digital coaxial audio cable (not included) to the DIGITAL AUDIO OUT jack on the back of the TV. DIGITAL AUDIO OUT Understanding the basics 1 Plug the power cord into an AC power outlet. 2 Press (power). Your TV turns on. goes into standby mode. Digital coaxial cable Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord. Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode. Home theater system 3 Connect the other end of the audio cable to the digital coaxial input jack on the home theater system. Note: The DIGITAL OUTPUT jack only works with DTV and HDMI output only. To play TV sound through a home theater system: 1 Turn on the TV and select a program to watch. 2 Turn on the home theater system and select the TV sound source, then adjust the volume to a comfortable level. To select the video input source: 1 Turn on your TV, then press INPUT on the remote control or on the TV. The INPUT SOURCE menu opens. 2 Press or to highlight the video source you want, then press ENTER. Options include TV, AV, YPbPr1,YPbPr2,VGA (computer), HDMI1,HDMI2,HDMI3 . Selecting a channel Tip: If you are using a cable or satellite box, use the remote control that came with that device to change channels. Connecting headphones Warning: When using headphones, adjust the headphone volume to avoid excessively loud volume which can damage your hearing. To connect headphones: Plug the headphones (not included) into the jack on the back of the TV. (headphone) Note: The TV sound automatically mutes when headphones are connected? HDMI2 HDMI1 Selecting the video input source To select a channel: Press CH /CH to go to the next or previous channel. Press the number buttons to enter the channel number you want, then wait for the channel to change, or press ENTER to change the channel immediately. To select a digital channel, press the number buttons to select the main digital channel, then press the dash(-). button, then the number buttons again to select the sub-channel. Wait for the channel to change or press ENTER to change the channel. Note: Button presses must be within three seconds of each other. COMP 2 PB PR HEADPHONE ANT IN DIGITAL AUDIO OUT AUDIO OUT VIDEO SERVICE AV Press LAST to go to the last channel viewed. Press GUIDE to display a list of memorized channels, press or to select the channel you want from the list, then press ENTER to go to that channel. Note: If the list has more than one page, press the pages. or to scroll through Adjusting the volume Connect devices with USB interface You can either use the USB connection cord or divectly insert the USB port at the side of TV. To adjust the volume: Press VOL /VOL to increase or decrease the volume. Press MUTE MUTE again to restore the sound. 10 LHD32V77MH Understanding the basics Displaying program information Preset Mode To display program information: Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution. Digital signal information—Displays channel number, station name, channel label (if preset), broadcast program name, signal type, audio information, resolution,and current program start and end times when watching a digital channel. Analog signal information—Displays channel number, channel label (if preset), signal type, audio information, and resolution when watching an analog channel. Press MENU,then GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the in formation provided by the broadcaster. conditions. Picture Lets you adjust the level of picture contrast. Increasing the contrast adds more light to the white areas of the picture. Brightness Lets you adjust the level of brightness on the screen. Increasing brightness can add more light to dark areas of the picture. Lets you control panel overall brightness and background. Lets you adjust the level of color intensity. Backlight Saturation Adjusts the color balance of the picture.Use this control to make skin tone look more natural. Hue Sharpness Lets you adjust the focus of the picture. Increase sharpness for a clearer picture, or decrease sharpness for a smoother picture. Color Lets you select one of three preset color Temperature temperature settings: Cool, Normalor Warm. Navigating the menus Sound Press to display the Main menu. MENU Contrast TV Sound mode Standard Equalizer >>> Balance Press to select menus, to adjust selected items, or move on-screen cursor left or right. ENTER Move: Enter: OK Exit: EXIT Press to select the menu items. ENTER Sound mode lets you select the Sound mode. ENTER Sound Equalizer sub-menu. EXIT Balance >>> Sleeptimer your TV. To access the menu, press MENU. The menus and their corresponding functions are described in the following table: TV Power on >>> Power off >>> V-Chip >>> Transpaerncy OSD Timeout >>> Move: Enter: OK Exit: EXIT Standard Contrast 50 Brightne 50 Backlight Saturation 50 Hue Sharpness Color temperature Move: TV Caption settings On-screen menu overview Picture Lets you adjust the balance between the left and right speakers. Features Press to close the menu or return to the previous screen. Picture mode lets you adjust the level of luminosity. Enter: Normal OK Caption settings Features Sleeptimer Exit: programs. Specify the amount of time before your TV EXIT Power on Lets you set the TV open time of every day. Understanding the basics LHD32V77MH DMP V-Chip Lets you select certain programs to be blocked. Lets you change access password. Transparency Adjust the transparency of menu DMP Slide time Lets you set the TV close time of every day. 11 Long Transitions None Rotate Zoom 1X Features Move: OSD Timeout Adjust the time takes the OSD to disappear when no operations are performed. Installation TV Language English Channels >>> Time >>> Source Labels >>> Reset AV settings Start now Move: Enter: OK Exit: EXIT Language You can select the menu's language among English, French and Espana. Channels You can select the mode of RF input and search the channels automatically. settings and daylight saving. Installation Time Source Labels Lets you name each input. Change setting back to default. (picture and sound only) Reset AV settings PC PC Auto adjustment Clock Phase 15 Horizontal shift 30 Vertical shift 15 Standby time Move: PC Start now Enter: OK Exit: EXIT Auto adjustment Adjust the position of image on screen automatically. Clock Adjust the clock used to synchronizing the image. Phase Adjust the phase of the clock used for synchronizing the image. Horizontal shift Adjust the horizontal position of the image. Vertical shift Adjust the vertical position of the image. Standby time computer has no signal. DMP Enter: OK Exit: EXIT Slide time Lets you set the slide time : long medium or short. Transitions Lets you set the transiotion from one picture to the next. Rotate Lets you revolve the picture. Zoom Lets you set the scale of the picture in DMP mode. DMP Function Introduction Signal mode support format Pcture JPEG Music MP3 12 LHD32V77MH Adjusting picture and sound Adjusting the picture Zoom2 —Enlarges the picture but may crop the top and bottom of picture. And no black bar on right and left. Panorama —Stretches the picture at the edges, but maintains a good aspect ratio at the center of the screen. To adjust the picture: In TV mode, you can adjust: 1 Press MENU. The Main menu opens. icture menu opens. 2 Press ENTER or . The PPicture Picture TV Picture mode Standard Contrast 50 Brightness 50 Backlight Saturation 50 Hue Sharpness Color temperature Move: Enter: Normal OK Exit: EXIT 3 Press or to highlight an option, then press ENTER or to access the option, and press or to adjust the option. You can select: Picture Mode—Selects the picture mode. You can select: Vivid (a bright and vivid picture) Standard (a standard picture) Game(a finely detailed picture) ciema(the brightness rightness is decreaced) power saver(decrease the backlight for to save energy) Note: You can also press PICTURE on the remote control to select the picture mode. Contrast–Lets you increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture. Brightness –Lets you increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture. Backlight –Adjust backlight to suit light conditions in the room. Under low room illumination, the use of lower backlight settings is recommended for reduced power consumption and extended life of the flat panel of your television. Saturation– Adjusts the intensity of the colours. Hue– change the picture quality when there is a NTSC signal at AV source. Sharpness–Lets you increase the sharpness level for clearer images or decrease the sharpness level for smoother images. Color temperature –Lets you change the color temperature. You can select the color temperature from three options: Cool, Normal or Warm. 4 Press EXIT to return to the previous menu, or press MENU to close the menu. Choosing the display format (aspect ratio) To choose the display format: 1 Press ASPECT on the remote control repeatedly to cycle through the available display formats. Options include: Normal —Selects the 4:3 aspect ratio to show a picture with black bar on both right and left hand side. Full Screen—Shows a full-screen picture. Zoom1 —Enlarges the picture but may crop the top and bottom of picture. And has less black bar on right and left than Normal aspect mode. Note: In analog TV mode, allows you to select all aspect modes. In digital TV mode, allows you to select Normal mode and fullscreen mode. Zoom and panorama modes are not available. Adjusting the sound To adjust the sound: In TV mode, you can adjust: 1 Press MENU. The Main menu opens. 2 Press or to highlight Audio, then press ENTER or . The Audio menu opens. Sound TV Sound mode Standard Equalizer >>> Balance Move: Enter: OK Exit: EXIT 3 Press or to highlight an option, then press ENTER or to access the option, and press or to adjust the option. You can select: Sound Mode — Press [ / ] to select between 4 different pre-adjusted sound modes:Custom,Standard,music,and Clear voice. The User mode preserves your preferred sound settings after using the Equalizer available under the Sound submenu. Equalize —Set the users' mode of sound, press [ / ] button to select the sound component of 120HZ, 500HZ, 1.5K, 5K, and 10K. Press [▲/▼] button to weaken or enlarge the sound to the proper value. The sound Equalizer can also be easily configured for most frequent situations by pressing the [SOUND] button on your remote controller. Preset settings are provided for User, Music, Standard and Speech conditions. Standard mode delivers a flat frequency response, which preserves the natural characteristics of the original sound. In Music mode the extremes of low and high frequencies are accentuated to enhance musical instrument reproduction. The opposite effect is accomplished in Speech mode where very low and high frequencies are attenuated to improve the reproduction and intelligibility of the human voice. Balance—Adjusts the balance between the left and right audio channels. 4 Press EXIT to return to the previous menu, or press MENU to close the menu. Selecting the audio mode To select the audio mode: Press SOUND on the remote control one or more times to cycle through the available sound modes. Options include: Standard (for normal programs). Music (for music programs). Clear Voice (for music programs). Custiom(for a customized sound mode).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-702 Modify Date : 2011:08:01 15:36:06+08:00 Create Date : 2011:08:01 15:35:57+08:00 Metadata Date : 2011:08:01 15:36:06+08:00 Creator Tool : Adobe Illustrator CS3 Format : application/pdf Title : untitled Creator : songdan Document ID : uuid:630b6adc-155a-42c8-8c7c-2e0eac024cd3 Instance ID : uuid:0c808ed3-20e6-4e5a-88f3-883fc511c9e3 Producer : Acrobat Distiller 9.2.0 (Windows) Has XFA : No Page Count : 4 For : ������, Bounding Box : 0 0 596 842 Container Version : 9 Creator Version : 14 Author : songdan Image Height : 842 Image Width : 596 Image Size : 596x842 Megapixels : 0.502EXIF Metadata provided by EXIF.tools