Hisense Electric LCDC0008 Part15 Subpart B-LCD TV User Manual

Hisense Electric Co., Ltd. Part15 Subpart B-LCD TV

W9HLCDC0008_User Manual 3_Rev.1

9
Connecting a home theater system
Connecting using a digital audio cable
To connect using a digital coaxial cable:
1Make sure that your TV’s power cord is unplugged and the home
2Connect one end of a digital coaxial audio cable (not included) to
the DIGITAL AUDIO OUT jack on the back of the TV.
3Connect the other end of the audio cable to the digital coaxial
input jack on the home theater system.
Note: The DIGITAL OUTPUT jack only works with DTV and HDMI output
To play TV sound through a home theater system:
1Turn on the TV and select a program to watch.
2Turn on the home theater system and select the TV sound source,
then adjust the volume to a comfortable level.
Connecting headphones
Warning: When using headphones, adjust the headphone volume to
avoid excessively loud volume which can damage your hearing.
To connect headphones:
Plug the headphones (not included) into the (headphone)
jack on the back of the TV.
Note: The TV sound automatically mutes when headphones are
connected?
DIGITAL
AUDIO OUT
Home theater
system
Digital coaxial cable
Understanding the basics
1Plug the power cord into an AC power outlet.
2Press (power). Your TV turns on.
3
goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To
completely disconnect power, unplug the power cord.
Note: If your TV does not receive an input signal for several minutes, it
automatically goes into standby mode.
Understanding the basics
Selecting the video input source
To select the video input source:
1Turn on your TV, then press INPUT on the remote control or on
the TV. The INPUT SOURCE menu opens.
2Press or to highlight the video source you want, then press
ENTER. Options include TV, AV, YPbPr1,YPbPr2, VGA (computer),
HDMI1,HDMI2,HDMI3.
Selecting a channel
Tip: If you are using a cable or satellite box, use the remote control that
came with that device to change channels.
To select a channel:
Press CH /CH to go to the next or previous channel.
Press the number buttons to enter the channel number you want,
then wait for the channel to change, or press ENTER to change
the channel immediately.
To select a digital channel, press the number buttons to
select the main digital channel, then press the dash(-). button,
then the number buttons again to select the sub-channel.
Wait for the channel to change or press ENTER to change the
channel.
Note: Button presses must be within three seconds of each other.
Press LAST to go to the last channel viewed.
Press GUIDE to display a list of memorized channels, press or
to select the channel you want from the list, then press ENTER to
go to that channel.
Note: If the list has more than one page, press or to scroll through
the pages.
Adjusting the volume
To adjust the volume:
Press VOL /VOL to increase or decrease the volume.
Press MUTE MUTE again
to restore the sound.
only.
LHD32V77MH
HDMI2
COMP 2
HEADPHONE
AUDIO OUT
VIDEO L RL R
AV
DIGITAL
AUDIO OUT
Y PBPRL R
HDMI1
SERVICE
ANT IN
Connect devices with USB interface
You can either use the USB connection cord or divectly insert the
USB port at the side of TV.
HDMI3
COMP1
PC AUDIO
RJ12
PC
USB
VGA
10 Understanding the basics
Navigating the menus
On-screen menu overview
your TV. To access the menu, press MENU. The menus and their
corresponding functions are described in the following table:
Picture
Brightness Lets you adjust the level of brightness on the
screen. Increasing brightness can add more light
to dark areas of the picture.
Contrast Lets you adjust the level of picture contrast.
Increasing the contrast adds more light to the
white areas of the picture.
Saturation Lets you adjust the level of color intensity.
Sharpness Lets you adjust the focus of the picture. Increase
sharpness for a clearer picture, or decrease
sharpness for a smoother picture.
Backlight Lets you control panel overall brightness and
background.
Color
Temperature
Lets you select one of three preset color
temperature settings: Cool, Normalor Warm.
ENTER
MENU
EXIT
ENTER
ENTER
Press to display the Main menu.
Press to select menus, to adjust selected
items, or move on-screen cursor left or right.
Press to select the menu items.
sub-menu.
Press to close the menu or return to the
previous screen.
Displaying program information
To display program information:
Press INFO to show an information banner. The information
banner shows current program information such as channel
number, video input source, and resolution.
Digital signal information—Displays channel number,
station name, channel label (if preset), broadcast program
name, signal type, audio information, resolution,and current
program start and end times when watching a digital
Analog signal information—Displays channel number,
channel label (if preset), signal type, audio information, and
resolution when watching an analog channel.
Press MENU,then GUIDE to show the digital program guide,
which may show a list of available programs, program times, and
program summaries, depending on the in formation provided
by the broadcaster.
channel.
Preset Mode
conditions.
1
2
Sound
Sound mode
2
Balance Lets you adjust the balance between the left
and right speakers.
3
LHD32V77MH
Picture TV
.
.
.
.
.
.
.
Picture mode Standard
Contrast
Brightne
Backlight
Saturation
Hue
Sharpness
Color temperature Normal
50
50
5
50
0
5
Move: Enter: OK Exit: EXIT
Hue
Sound TV
Sound mode Standard
Equalizer >>>
Balance 0
Move: Enter: OK Exit: EXIT
Features TV
Caption settings >>>
Sleeptimer 0
Power on >>>
Power off >>>
V-Chip >>>
Transpaerncy 0
OSD Timeout >>>
Move: Enter: OK Exit: EXIT
Equalizer
Features
Caption
settings
3
Power on
Sleeptimer
Adjusts the color balance of the picture.Use this
control to make skin tone look more natural.
lets you select the Sound mode.
lets you adjust the level of luminosity.
programs.
Specify the amount of time before your TV
Lets you set the TV open time of every day.
11
Understanding the basics
Installation
4
4
PC
5
5
Time
Source Labels
Reset AV
settings
Auto
adjustment
Clock
Phase
Horizontal
shift
Vertical shift
Standby time
Language
LHD32V77MH
Features
3
OSD Timeout
Installation TV
Language English
Channels >>>
Time >>>
Source Labels >>>
Reset AV settings Start now
Move: Enter: OK Exit: EXIT
Channels
PC PC
Auto adjustment Start now
Clock
Phase
Horizontal shift
Vertical shift
Standby time
0
15
30
15
0
Move: Enter: OK Exit: EXIT
DMP DMP
Slide time Long
Transitions None
Rotate 0
Zoom 1X
Move: Enter: OK Exit: EXIT
DMP
6
Slide time
Transitions
Rotate
Zoom
6
Lets you set the TV close time of every day.
Adjust the transparency of menu
You can select the menu's language among
English, French and Espana.
settings and daylight saving.
Adjust the clock used to synchronizing the
image.
Lets you set the slide time : long medium or
short.
Adjust the time takes the OSD to disappear
when no operations are performed.
Lets you select certain programs to be blocked.
Lets you change access password.
Lets you set the scale of the picture in DMP
mode.
You can select the mode of RF input and search
the channels automatically.
Lets you name each input.
Change setting back to default. (picture and
sound only)
Adjust the position of image on screen
automatically.
Adjust the phase of the clock used for
synchronizing the image.
Adjust the horizontal position of the image.
Adjust the vertical position of the image.
computer has no signal.
Lets you revolve the picture.
V-Chip
Lets you set the transiotion from one picture to
the next.
Signal mode
DMP Function Introduction
Pcture
Music
support format
JPEG
MP3
Transparency
,
12
Adjusting the picture
To adjust the picture:
1Press MENU. The Main menu opens.
2Press ENTER or . The Picture menu opens.
3Press or to highlight an option, then press or to access
the option, and press or to adjust the option. You can select:
Picture Mode—Selects the picture mode. You can select:
Vivid (a bright and vivid picture)
Standard (a standard picture)
: You can also press PICTURE on the remote control to select the
Backlight
–Adjust backlight to suit light conditions in the room.
Under low room illumination, the use of lower backlight settings
is recommended for reduced power consumption and extended
life of the flat panel of your television.
Saturation– Adjusts the intensity of the colours.
Sharpness–Lets you increase the sharpness level for clearer
images or decrease the sharpness level for smoother images.
Color temperature –Lets you change the color
temperature. You can select the color temperature from
three options: Cool, Normal or Warm.
4Press MENU
to return to the previous menu, or press
EXIT to
close the menu.
Choosing the display format (aspect ratio)
To choose the display format:
1Press ASPECT on the remote control repeatedly to cycle through
the available display formats. Options include:
Normal —Selects the 4:3 aspect ratio to show a picture
with black bar on both right and left hand side.
Zoom1 —Enlarges the picture but may crop the top and
bottom of picture. And has less black bar on right and left
Full Screen—Shows a full-screen picture.
Panorama —Stretches the picture at the edges, but
maintains a good aspect ratio at the center of the screen.
Adjusting the sound
To adjust the sound:
1Press MENU. The Main menu opens.
2Press or to highlight Audio, then press ENTER or . The
Audio menu opens.
3
Equalize
4Press MENU to return to the previous menu, or press EXIT to
close the menu.
Selecting the audio mode
To select the audio mode:
Press SOUND on the remote control one or more times to cycle
through the available sound modes. Options include:
Standard
erutciP erutciP
picture mode.
–Lets you increase or decrease the contrast of the
picture. Increase the contrast to adjust the white areas of the
picture or decrease the contrast to adjust the black areas of
the picture.
Contrast
–Lets you increase or decrease the brightness of
the picture. Increasing the brightness can add more light to
dark areas of the picture, while decreasing the brightness
can add more darkness to light areas of the picture.
Brightness
Note
ENTER
Press or to highlight an option, then press or to access
the option, and press or to adjust the option. You can select:
ENTER
Balance—Adjusts the balance between the left and right
audio channels.
than Normal aspect mode.
Note: In analog TV mode, allows you to select all aspect modes.
In digital TV mode, allows you to select Normal mode and full-
screen mode. Zoom and panorama modes are not available.
(for normal programs).
Music (for music programs).
Clear Voice (for music programs).
Custiom
(for a customized sound mode).
Adjusting picture and sound
LHD32V77MH
Picture TV
.
.
.
.
.
.
.
Picture mode Standard
Contrast
Brightness
Backlight
Saturation
Hue
Sharpness
Color temperature Normal
50
50
5
50
0
5
Move: Enter: OK Exit: EXIT
Game(a finely detailed picture)
ciema(the brightness rightness is decreaced)
power saver(decrease the backlight for to save energy)
Hue– change the picture quality when there is a NTSC signal at
AV source.
Sound TV
Sound mode Standard
Equalizer >>>
Balance 0
Move: Enter: OK Exit: EXIT
— Press [ / ] to select between 4 different
pre-adjusted sound modes:Custom,Standard,music,and Clear
voice. The User mode preserves your preferred sound settings
after using the Equalizer available under the Sound submenu.
Sound Mode
—Set the users' mode of sound, press [ / ] button
to select the sound component of 120HZ, 500HZ, 1.5K, 5K, and 10K.
Press [▲/▼] button to weaken or enlarge the sound to the
proper value.
The sound Equalizer can also be easily configured for most frequent
situations by pressing the [SOUND] button on your remote controller.
Preset settings are provided for User, Music, Standard and Speech
conditions. Standard mode delivers a flat frequency response, which
preserves the natural characteristics of the original sound. In Music
mode the extremes of low and high frequencies are accentuated to
enhance musical instrument reproduction. The opposite effect is
accomplished in Speech mode where very low and high frequencies
are attenuated to improve the reproduction and intelligibility of the
human voice.
In TV mode, you can adjust:
In TV mode, you can adjust:
Zoom2 —Enlarges the picture but may crop the top and
bottom of picture. And no black bar on right and left.

Navigation menu