Hisense Electric LCDC0008 Part15 Subpart B-LCD TV User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1515023
Application ID	u/eKpAUvXNpJPbxpb43cGw==
Document Description	W9HLCDC0008_User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	274.12kB (3426513 bits)
Date Submitted	2011-08-02 00:00:00
Date Available	2011-08-03 00:00:00
Creation Date	2011-08-01 15:36:20
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2011-08-01 15:36:27
Document Title	untitled
Document Creator	Adobe Illustrator CS3
Document Author:	songdan

LHD32V77MH
Item Name
Description
MENU
Display the main menu.Back menu display.
Press or
menus.
Using the remote control
to move up or down in on-screen
Press or to move left or right in on-screen
menus or to adjust menu settings.
ENTER
10 Numbers
11
dash)
or to open sub-menus.
Press the number buttons to enter channel
numbers or the parental control password.
For more information.
Press to select a digital sub-channel.
After pressing the GUIDE button in the digital
Program guide TV channel option, the same color buttons will
12 (EPG) function appear with explanations in the on-screen
display (OSD). Follow the steps shown in the
buttons
OSD.
13
When you are listening to music and enjoy
pictures.You can switch between playing and
pause through this button.
Exit the current state.
14 TV
Press to select the TV as the video input source.
15 INPUT
Press to open the INPUT SOURCE menu, then
press or to select the video input source
you want. For more information.
16 ASPECT
Select screen mode.
17 SLEEP
Press to set the sleep timer.
18 GUIDE
Press to open the DTV program guide(if
available) .For more information.
19 INFO
Display the current channel number.
20 CH
21
/ CH
Dispose of batteries as hazardous waste.
Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries and can cause old batteries to leak.
Remove batteries as soon as they become inoperable. Chemicals that
can leak from the batteries can cause a rash. If the batteries leak,
clean the battery compartment with a cloth.
If the remote control is not used for an extended period of time,
remove the batteries.
Do not expose batteries to excessiv
other heat sources.
Aiming the remote control
To aim the remote control:
Point the remote control towards the remote sensor on the front
of your TV.
Press to go to the next or previous channel in
the channel list. For more information.
MUTE
Press to mute the sound. Press again to restore
the sound.
DMP
Press to select the DMP as the video input source.
22 EXIT
Battery precautions:
Press to close the on-screen menu.
TV
INPUT
CCD
MTS/SAP
ASPECT
SLEEP
SOUND
PICTURE
INFO
GUIDE
MUTE
CH
VOL
DMP
MENU
23 LAST
Return to previous channel.
ENTER
LAST
Using the remote control
EXIT
EN-31205
Installing remote control batteries
To install remote control batteries:
1 Press down on the battery compartment cover lock, then remove
the remote control cover.
2 Insert two AAA batteries into the battery compartment. Make
sure that the + and – symbols on the batteries match the +
and – symbols in the battery compartment.
3 Replace the cover. Make sure that the lock snaps into place.
4 Install screw.
Notes:
Do not expose the remote control to shock or liquids.
Do not use the remote control in an area with high humidity.
Do not place the remote control in direct sunlight.
Do not place objects, such as furniture, between the remote control
and the remote sensor.
The remote control may not work if direct sunlight or bright light
shines on the remote sensor. Either move your TV or change the angle
at which you use the remote control.
Making connections
LHD32V77MH
Making connections
HDMI device
Before you make any connections:
Check the plugs on the ends of cables to make sure that they are
the correct type before you try plugging them into jacks on the
TV.
Make sure that all plugs are securely inserted into the jacks.
Loose connections can result in image or color problems.
When connecting devices to the TV, make sure that the TV and
HDMI cable
HDMI2
HDMI1
COMP 2
unplugged.
PB
PR
VIDEO
HEADPHONE
ANT IN
Connecting the power
DIGITAL
AUDIO OUT
To connect the power cord:
Connect the power cable to the AC IN jack on the back of the TV,
then connect the other end to a power outlet.
Power outlet
AUDIO OUT
SERVICE
AV
Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect
to the HDMI jack on the TV, then connect an audio cable to the
PC AUDIO jack on the back of the TV.
To play from the HDMI device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select HDMI1,HDMI2,HDMI3, then press
ENTER.
3 Turn on the HDMI device, then set it to the correct mode. Refer to
the instructions that came with the HDMI device.
Selecting a location
You should select a location for the TV:
Where direct light does
That has indirect and soft lighting
Where the TV has access to an antenna or cable TV connection
Where the TV has access to a power outlet
Note:
may cause eye strain.
Connecting an HDMI device
Note: If your device has an HDMI connection, we recommend you use it to
get the best picture and sound quality possible.
To connect a component video device:
1 Make sure that your TV’s power cord is unplugged and the
2 Connect a component video cable to the COMPONENT OUT jacks
on the component video device.
RJ12
PC
VGA
Audio cable
Make sure that you only use the type of power source indicated on the
marking label.
Always unplug the power cord when not using the TV for a long
period of time.
Component cables often have red, green, and blue color-coded video
connectors and red and white audio connectors. Match the colors when
making connections.
COMP1
Notes:
Connecting a component video device
Component video cable
Power cord
PC AUDIO
HDMI3
USB
Component video device
To connect an HDMI device:
Connect one end of an HDMI cable (not included) to the HDMI 1
or HDMI 2 jack on the back of your TV, then connect the other end
of the cable to the HDMI OUT jack on the HDMI device.
3 Connect the other end of the component video cable to the
COMPONENT jacks on the back/side of your TV.
4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the
component device.
5 Connect the other end of the audio cable to the COMPONENT
AUDIO-R and AUDIO-L jacks on the back/side of your TV.
Making connections
LHD32V77MH
To play from the component video device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select YPbPr1 or YPbPr2, then press ENTER.
3 Turn on the component video device and start playback. Refer to
the instructions that came with the component video device.
3 Connect the audio connectors of the AV cable (the red and white
connectors) to the AV OUT AUDIO jacks of the external device,
then connect them to the AV L and R jacks on the back of your TV.
HDMI2
HDMI1
COMP 2
Connecting an antenna, cable TV, or
satellite TV box
PB
PR
VIDEO
HEADPHONE
ANT IN
DIGITAL
AUDIO OUT
AUDIO OUT
If you are connecting a satellite TV or cable box, you can use one of the
following (if available):
Best - HDMI cable
Better - Video component cables
Good - Video composite cable
Acceptable - 75-ohm coaxial cable.
SERVICE
AV
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
AV cable
To connect an antenna, cable TV, or satellite TV box:
Connect one end of a 75-Ohm, coaxial cable to the ANT IN jack
on the back of the TV, then connect the other end of the cable to
the antenna or cable TV wall jack.
Home antenna terminal
(75 ohm)
ANT IN jack on
the side of the TV
VCR, camcorder,
or game console
To play the external AV device:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select AV, then press ENTER.
3 Turn on the device, then start playback on the device.
Antenna, cable TV,
or satellite box
Connecting a computer
To connect a computer:
1 Make sure that your TV’s power cord is unplugged and the
75-Ohm coaxial cable
2 Connect one end of a VGA cable (not included) to the VGA jack on
the side of the TV, then connect the other end of the cable to the
HDMI2
HDMI1
COMP 2
PB
PR
HEADPHONE
ANT IN
DIGITAL
AUDIO OUT
AUDIO OUT
VIDEO
SERVICE
RJ12
PC
COMP1
VGA
PC AUDIO
HDMI3
USB
AV
Notes:
We recommend using a 75-Ohm, coaxial cable to reduce interference
and noise that may be caused by radio wave transmissions.
Do not bundle the coaxial cable with the power cord or any other
cables.
If you are using an antenna and reception is not good, contact a
service technician to adjust the antenna.
Connecting a VCR, camcorder, or game
console
Note: If the VCR, camcorder, or game console has component jacks
(better), or an HDMI jack (best), connect them using the best available
connection.
To connect a VCR, camcorder, or game console:
1 Make sure that your TV’s power cord is unplugged and the VCR,
2 Connect one end of a standard AV cable (not included) into the
AV video jack on the back of the TV, then connect the other end
of the cable to the AV OUT VIDEO jack on the external device.
VGA
cable
Audio cable
Computer
3 Connect one end of an audio cable with a stereo mini-plug (not
included) to the PC AUDIO jack on the side of the TV, then
connect the other end of the cable to the AUDIO OUT jack on
the computer.
To play video from the computer:
1 Turn on the TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the computer display
properties as needed.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Modify Date                     : 2011:08:01 15:36:27+08:00
Create Date                     : 2011:08:01 15:36:20+08:00
Metadata Date                   : 2011:08:01 15:36:27+08:00
Creator Tool                    : Adobe Illustrator CS3
Format                          : application/pdf
Title                           : untitled
Creator                         : songdan
Document ID                     : uuid:6d20755f-205e-4297-9b4b-3cee2daac406
Instance ID                     : uuid:4a2c9511-339d-49bc-9ddd-a3a9e4a62f74
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Has XFA                         : No
Page Count                      : 3
For                             : ������,
Bounding Box                    : 0 0 596 842
Container Version               : 9
Creator Version                 : 14
Author                          : songdan
Image Height                    : 842
Image Width                     : 596
Image Size                      : 596x842
Megapixels                      : 0.502

EXIF Metadata provided by EXIF.tools