Hisense Electric LCDC0008 Part15 Subpart B-LCD TV User Manual

Hisense Electric Co., Ltd. Part15 Subpart B-LCD TV

W9HLCDC0008_User Manual 4

13Adjusting the FeaturesTo change the channel settings:1Press MENU. The Main menu opens.2Press or to highlight Features, then press ENTER or . The TV menu opens.3Press or to highlight an option, then press or to accessthe option, and press or to adjust the option. You can select:ENTERCaption settings– Adjust Captioning settings.Changing channel settings LHD32V77MHFeatures TVCaption settings >>>Sleeptimer 0Power on >>>Power off >>>V-Chip >>>Change PIN >>>Transpaerncy 0OSD Timeout >>>Move: Enter: OK Exit: EXITSleeptimer –Press [ / ] to set the sleep timer between 0-120minutes.Power on –When “On”, you can set the time when the TV turns on automatically. And Set the current time when the TV turns on.Power off –When “On”, you can set the time when the TV turns off automatically. And set the current time when the TV turns off.V-Chip –Lock channels in Channel Manager, to prevent unauthorized users, such aschildren, from watching unsuitable programme. Available only when the Input source is set to TV. Change PIN–Change the password of the V-Chip function.Transpaerncy–Adjust the transparency of menu.OSD Timeout –The time it takes the OSD to disappear whenno operations are performed. You can change it from Off, 5seconds, 10seconds, and 30seconds.In TV mode, you can adjust:Hotel Function Lock TVMove: Enter: OK Exit: EXIT OffSearch Lock OffUser Save Lock OffPicture Lock OffAudio Lock OffFeatures Lock OffInstallation Lock OffDMP Lock Off.......Function V-Chip TVMove: Enter: OK Exit: EXITUS TV Parental Guid... >>>US MPAA Rating SelectCanadian English Rating SelectCanadian French Rating Select.......Press the number buttons to enter the four-digit password. The default password is 0532. The V-Chip menu opens.Access to V-Chip MenuProgram Block– A–Rating Enable is on.B–U.S. TV Ratings: You can choose TV ratings according to the illustration on the screen.C–The settings for U.S. Movie Ratings, Canada (English) Ratings, and Canada (French) Ratings follow Step B. If you want to block an unrated program, turn on this function. You can select all the ratings listed in the charts below.Press or to highlight an option, then press or to accessthe option. Press or to highlight a rating and press to ENTERENTERlock the rating and all other higher ratings or unlock the rating and U.S. TV ratings (age-based)These ratings are determined by the Federal Communications Commission (FCC).TV-Y All children.TV-Y7 Suitable for children 7 and older.TV-G General audiences.TV-PG Parental guidance suggested.TV-14 Parental guidance strongly suggested.TV-MA Mature audiences only.U. S. TV ratings (content-based)FV Fantasy violence.V Violence.S Sexual situations.L Strong language.D Suggestive dialog.U.S. movie (MPAA) ratingsThese ratings are determined by the Motion Picture Association of America (MPAA).G General audiences.PG Parental guidance suggested.PG-13 Suitable for children 13 and older.R Parental guidance suggested for children under 17.NC-17 Not suitable for children under 17.X Adults only.Canadian French ratingsdetermined by La Régle du cinéma du Québec.G General audiences.8 ans+ Suitable for children 8 and older.13 ans+ Suitable for children 13 and older.16 ans+ Suitable for children 16 and older.18 ans+ Adults only.Canadian English ratingsThese ratings are based on the Canadian Home Video Rating System, determined by the Canadian Motion Picture Distributors Association (CMPDA).C Suitable for all children.C8+ Suitable for children 8 and older.G General audiences.PG Parental guidance suggested.14+ Suitable for children 14 and older.18+ Adults only.
Adjusting the InstallationTo change the channel settings:1Press MENU. The Main menu opens.2Press or to highlight Installation, then press ENTERTV menu opens.3 or . The Press or to highlight an option, then press or to accessthe option, and press or to adjust the option. You can select:ENTERLanguage –You can select the menu's language among English, French and Spanish.Installation TVLanguage EnglishChannels >>>Time >>>Source Labels >>>Reset AV settings Start nowMove: Enter: OK Exit: EXITChannels –You can select the mode of RF input and search the channels automatically.Time– Lets you set the exact time. You can setupdate,time,time zone and daylight saving.Source Labels–Lets you name each input.Reset AV settings –Change setting back to default. (picture and sound only)In TV mode, you can adjust:Installation Channels TVMove: Enter: OK Exit: EXIT.......Autoprogram Start nowInstallation mode Antenna14Changing channel settingsLHD32V77MH
15Remote controlGeneralNote: If the problem is not solved by using these troubleshooting The picture has a few bright or dark spots.A few bright or dark spots on an LCD screen is normal. It does not Good picture, but no sound.Make sure that the sound is not muted.Make sure that the sound mode is set to Stereo or Mono. For more information, see “Selecting the audio mode” on page 12.Audio noise. Make sure that there is no interference with infrared equipment such as a cordless telephone or headphones. Move the infrared equipment away from the TV to eliminate the noise.Problem SolutionRemote control does not work.Make sure that the TV power cord is plugged in.Make sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV.Make sure that the batteries are installed correctly. For more information, see “Installing remote control batteries” on page 6.Replace the batteries. For more information, see “Installing remote control batteries” on page 6.Trouble programming your existing universal remote control.See instructions and a table of common codes in “Programming a universal remote control to work with your TV” on page 7.Codes are subject to change. For up to date codes, go to www.dynexproducts.com.Replace the batteries. For more information, see “Installing remote control batteries” on page 6.Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist.Problem SolutionProblem SolutionOne or more channels do not display.Make sure that the channels are not blocked. For more information, see “Setting parental controls” on page 13.Password is lost. Enter 0532 to access parental controls, then set a new password. For more information, see “Setting parental controls” on page 13.Some settings cannot be accessed.If a setting is grayed, the setting is not available in the current video input mode.TV cabinet creaks. When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction.Control buttons on the TV do not work.Disconnect the power cord, wait a few seconds, then reconnect the power cord and turn on the TV.TroubleshootingBefore calling for service, check the following information for possible solutions to problems you may experience. If none of these solutions Caution: Do not try to repair the TV yourself. Refer all servicing to Video and audioProblem SolutionNo picture (screen is not lit) and no sound.Make sure that the power cord is plugged in.Press POWER on the TV or the remote control.Make sure that the correct video input source is selected. For more information, see “Selecting the video input source” on page 9.Try another channel. The station may be experiencing problems.Dark, poor, or no picture (screen is lit), but sound is good.Adjust the brightness. For more information, see “To adjust the picture:” on page 12.Make sure that the correct picture mode is selected. For more information, see “To adjust the picture:” on page 12.Make sure that the antenna or cable TV is connected correctly and securely. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 8.No color, dark picture, or color is not correct.Adjust the color saturation. For more information, see “Adjusting the picture” on page 12.Only snow (noise) appears on the screen.Try another channel. The station may be experiencing problems.Make sure that the antenna or cable TV is connected correctly and securely. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 8.Dotted lines or stripes appear on the screen.Adjust the antenna.Move the TV away from noise sources such as cars, neon signs, or hair dryers.Double images. Try using a highly directional outdoor antenna or cable TV.Troubleshooting LHD32V77MH
16Weight and dimensions shown are approximate.Legal noticesFCC Part 15This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.that to which the receiver is connected.Consult the dealer or an experienced technician for help.FCC warningresponsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.CablesConnections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.Canada ICES-003 statementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.Standard Television Receiving Apparatus — Appareil de réception télévision ordinaire, Canada BETS-7 / NTMR-7HDMItrademarks or registered trademarks of HDMI Licensing LCC.TV type LCDTV panel 31.5-inch TFT LCDTV system NTSC-M, ATSCReceiving channels VHF: 2 - 13UHF: 14 - 69CATV: 1 - 125CADTV: 1-135DTV: 2-69Audio multiples BTSC systemAudio out 6 W x 2Power requirement AC 120 V, 60 HzPower consumption 140 W (With Max backlight)Dimensions(W × H × D with stand) 31.17 × 22.08 × 9.05 inches (792 × 561 × 252 mm)Weight 26.9 lbs. (12.2 kg)Input terminals Composite video/L and R audio (1)Component video/L and R audio (2)HDMI (3)VGA/audio (1)ANT/Cable In (1) USB(1)Output terminals Digital Coaxial Audio (1)Headphone (1)Control terminals SERVICE PORT (2)MaintenanceJust like with any other household appliance, the performance and life-expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LCD screen.Cautions:disconnected from the power outlet before cleaning the TV.Never spray or pour any liquid directly onto the screen or the case.CleaningClean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution.Clean the screen with a clean, soft, lint-free cloth. If additional cleaning is necessary, apply a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution to the cloth.Specifications, Legal noticesLHD32V77MH
17Adjusting hotel settingsTo adjust hotel settings:1Press MENU. The Main menu opens.2Press or to highlight SOUND, then press ENTER or , audio3HOTEL MODE —Allows installer to active or disable hotel options. TV ON SETTING —Allows installer to set up of initial options eachPress or to highlight an option, then press or to accessthe option, press or to select a value and press to adjustthe option. You can select:ENTER menu opens. Press or to highlight balance, use or to adjust to zero, then press the number buttons to enter the three- digit password 5 4 8. The Hotel Settings Menu opens.Note: Please redo above step if fail when opening Hotel Settings Menu.ENTER: Hotel options are active. On: Hotel options are disabled. time a guest turns TV on.On VolumeIn ON mode, can be adjusted from 0 to 100.ON VOLUME VALUEOn SourceInput options. Choises include antenna ( )TV , AV, component )( ypbpr1, ypbpr2 , HDMI1,HDMI2,HDMI3, VGA.andwill remember previous input source.LAST VGA.on source will activate selection andTV ON CHANNEL ON CHANNEL NUMBER.—Allows installer to set up desiredOn Channel Numberchannel when TV is turned on. If no desired channel is requestedON CHANNEL—Allows installer to select one of three options.Power OnChoices are andLAST, ON Standby.: TV will return to whatere operation it was in before powerLAST out.ON : TV will turn on when power is restored.Standby : TV will be activated but not turned on.—Allows installer to active or disable basic settings.Basic SettingON : TV picture defaults to Normal viewing mode, Normal Audio OFF : Installer can go to and adjust settings.and Zoom Aspect is full screen.User Save LockFUNCTION Lock —Allows installer to lock the following functions.—Locks key pad.kB lockOFF: Usable.ON : Locked down (disabled).—Locks key pad.Search Lock OFF: Usable.ON : Locked down (disabled).—Locks hotel guest adjustment.User Save Lock OFF: Menu features can be adjusted by hotel guest and be ONremembered in TV memory.factory default settings.LHDN32V88MHHotel SettingsSound TV0Move: Enter: OK Exit: EXITSound mode StandardEqualizer >>>BalanceBalance 0Hotel TV On Setting TVMove: Enter: OK Exit: EXITOn Volume OffOn Source LastLogo HISENSEPower On StandbyBasic Seetting Off.......Hotel Function Lock TVMove: Enter: OK Exit: EXIT OffSearch Lock OffUser Save Lock OffPicture Lock OffAudio Lock OffFeatures Lock OffInstallation Lock OffDMP Lock Off.......Hotel Function Lock TVMove: Enter: OK Exit: EXITKB Lock OffSearch Lock OffUser Save Lock OffPicture Lock OffAudio Lock OffFeatures Lock OffInstallation Lock OffDMP Lock Off.......—Locks Picture adjustments in menu.Picture LockOFF: Picture adjustments in menu are allowed by user.ON : Locks all picture adjustments.—Locks Audio adjustments in menu.Audio LockOFF: Audio adjustments in menu are allowed by user.ON : Locks all audio adjustments except Balance.—Allows installer to choose one of three options. ChoicesLOGOare and .: No logo when TV is turned on. TV goes directly to source.OFF: Displays Hisense TV logo.HISENSE: Displays welcome logo.WELCameOFF, HISENSE WELCOME
18CLONE(copy) settings to any additional units you are installing.First plug in USB driver to unit that is already set up. (TV will showA---USB found).Select READ OUT which brings up cloning function.B---Select YES to clone (copy). When complete, TV will show uploadC---success. Hotel Menu will close automatically.MAX VOLUME —Allows installer to adjust max volume from 0 to 100.: TV will stay on with no signal.OFFMIN VOLUME —Allows installer to adjust minimum volume from 0 to 100.The volume value can be input by digit-number buttons on remote.The volume value can be input by digit-number buttons on remote.AUTO Standby: TV goes to Standby mode when there is no signal after 15 mimutes.ONhotel settings menu.CHANNEL SETTINGS—Allows access to channel setting without exiting In channel setting mode, Allows edit and Program Guide Editremapping and editing of channels available. Using the color keysinstaller can change channel position and name.ON : No detail information on channel.info may also be available depending on provider.LHDN32V88MH Hotel SettingsInput SelectionOFF: Locked down (disabled).ON : Usable.Info LockOFF: Programing name and description (if available) aredisplayed when info button on remote is touched. Programing Feature Lock—Locks Feature menu adjustment in menu.—Locks Installation menu adjustment in menu.—Locks DMP menu adjustment in menu.Installation LockDMP LockV-Chip—Locks V-Chip function in menu.Hotel mute——Hotel Channel Setting TVSelect: Enter: OK Exit: EXITDigital Page2/1NO# Name PHY. Program SkipRename: Skip: Copy: Delete: Swap:23 5-123 5-223 5-323 5-417 1729 2945 4557 5769 69-169 69-212345678910CLONING OPTION 2.Take loaded USB drive to next unit, plug in next installationA---Plug in loaded USB drive.B---Turn TV on.C---Go to Menu.D---Go to Audio menu.E---Go to Balance. Use arrows to adjust to zero.F---Enter access code 548 with remote number key. Hotel menuG---unit (You do not need to have sources connected).Go to clone near bottom.H---opens.Choose option Write In. Hit Enter on remote. Cloning option J---will appear on screen.Select Yes. System will acknowledge download success. TVk---will be cloned.SSID setting—Set or reset SSID code for Pro:Idiom decording. Set SSID: Reset to factory default code.yes—Enter new SSID code.Reset SSID—Reset SSID code to factory default value.: Maintain current settings.No: TV is muted. User can not adjust volume.Allows installer to mute TV speaker.ON: TV is not muted. User can adjust volume.OFFCLONING OPTION 1.Plug in new TV.A---Plug in loaded USB drive.B---Turn TV on.C---On screen will acknowledge USB detected.D---Press menu.E---Key in numbers 2 5 6 6 3 on remote.F---Cloning option will appear on screen.G---SW Version—shows current software version information.

Navigation menu