Hisense Electric LCDF0093 LED LCD TV User Manual W9HLCDF0093 2

Hisense Electric Co., Ltd. LED LCD TV W9HLCDF0093 2

W9HLCDF0093_User Manual 2

11Shortcuts InstructionsShortcuts InstructionsYou can use shortcuts on the remote control for fast operation. For more information about your TV remote, refer to the Quick Start Guide in accessories.Turning your TV on or offTo turn your TV on:1. Connect the power cord to the back of the TV, then plug the power cord into an AC outlet.2. When the TV is powered on, press the [ ] button on the remote to turn TV.To turn your TV off, press the [ ] button on the remote.NOTES• When your TV is in standby mode, it is still consuming power. To completely disconnect power, please remove the plug from the AC outlet.• If your TV does not receive an input signal for several minutes, it automatically goes into standby modeSelecting the Input SourceSelect the Input Source depending on the video device you have connected to your TV.To select the input source:1. Turn on your TV, then press the [INPUT] button on the remote, the list of Source appears.2. Press the [< / >] buttons to select the input source.3. Press the [OK] button to confirm your selection.Using the Live TVTo view broadcast programs, press the [Live TV] button on your remote.Channel search guideWhen you select TV as input, if no TV channels were saved before, you will be prompted to do a channel search. Before channel tuning could start, you must specify the tune mode, Antenna or Cable. You can also go to Setting menu > Channel to change the channel settings.Launch Live TVAfter channel tuning is done for the first time, the screen will display Live TV operating tips, including: how to start the channel list, how to start channel info and so on. [OK] Show channel list [ v ] View channel info [Back] View recent channelsView channel infoPRE-CHShow channel list
12Completing the First-Time Setup MenuNow that you have attached the TV stand and connected your external devices, it's time to complete the first-time setup menu. Completing the First-Time Setup MenuPress the [Power] button on the remote to turn on the TV. A splash screen that shows the Hisense logo appears. Next, the First-Time Setup Menu begins by prompting you to choose your Language, Country, and Time Zone. After the splash screen that displays the Hisense logo appears, begin the first-time setup menu. Screen TaskLanguage and LocationLANGUAGE AND LOCATIONLanguageLanguage ModeTerms Network Input DoneEnglish United State SelectCountry Time Zone1. Using the D-pad arrows of your remote, choose your Language, Country and Time Zone. 2. Next, navigate to the Forward arrow and press [OK].TIP: The edge of the drop-down boxes and the back and forward arrows change to blue when you select them.Terms of ServiceTERMS OF SERVICEAccept allAccept EULAAccept Terms of Serv...Language ModeTerms Network Input DoneThe EULA and Terms must be accepted in order to continue.1. Press [OK] on your remote to select Accept All. 2. When you’re done, then navigate to the Forward arrow and press [OK]. TV Usage ModeTV USAGE MODETV ModeHomeLanguageHome ModeIn Home Mode, your TV will automatically adjust the brightness of your screen based on the ambient light in the room. ModeTerms Network Input DoneSelect Home (which appears by default) and then navigate to the Forward arrow to press [OK].Note: ‘Store mode’ should only be selected by Retailers who plan to demonstrate the TV.Disclaimer: Images throughout this document are for illustrative purposes only and may differ from the actual product.
13Completing the First-Time Setup MenuScreen TaskNetwork ConnectionNETWORK CONNECTIONLanguage TermsEthernetConnecting EthernetConfigureWiFiMode Network Input DoneIf your TV does not automatically detect an Ethernet con-nection, then select Wi-Fi. When you’re done, select your network from the list that displays and move to the next screen.LIVE TV INPUT SOURCE Select how you receive your TV channels. Choosefrom one of the following sources below and then moveto the next screen.•TV•AV•COMPONENT•HDMINOTE: If you use an antenna to receive channels, thenyoumustcompletetherst-timesetupmenuinorder to run a channel scan.CONGRATULATIONS! Your TV is now ready to use.Press [OK] on your remote if you are fine with the selections that appear on the screen. Otherwise, navigate to the back arrow on the screen to change your selection.First-time Setup Menu (continued) CONGRATULATIONS !Your TV is now ready to use TV SelectionsEnglish United States Eastern Home Mode Ethernet TVOKLanguage Terms Mode Network Input Done
14Your Hisense TV comes with many TV setting features to allow you to customize the picture based on your viewing preference and environment. As you navigate throughout different screens to access settings, some of the indicators appear as words ‘On’ and ‘Off’ and some are open [o] and closed [I] symbols. An [o] indicator signifies a feature that is disabled.Accessing the Quick Setup MenuYou can press the [Quick Setup] menu button [ ] and press the right arrow on the D-pad to view the full menu settings. The Quick Setup menu consists of the following settings:• Picture• Sound• Channel• Network• System• About TV Basic and Advanced TV SettingsPicture MenuIf you’d like to configure the settings for your picture, then there are six types of picture modes available: Vivid, Standard, Theater, Energy Saving, Game and Sport.Once you choose the mode, you can adjust the picture based on the following settings: Brightness: Adjust the Brightness level to generate lighter or darker images. Contrast: Adjust the Contrast level to increase or decrease how bright images appear. Color: Adjust the color intensity of the picture for a more vibrant image. Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following settings: Normal, Zoom, Wide, Cinema, 1:1 PIXEL MAP, Panoramic, Direct, Auto. Backlight: This TV has a Dynamic Backlight Control setting that you can set to high or low. The Backlight setting enables you to adjust how bright you want images to appear. In addition, an Eco Sensor setting is available that will enable the TV to automatically adjust the picture settings according to the amount of ambient light in your room. This is a money-saving feature because it reduces power consumption. Advanced Picture Settings: Adjust advanced picture settings based on your viewing preference. •Display: Adjust advanced picture settings in the component source. •OverScan: Disable the overscan for PC inputs to fully display all menu items at the edges of the screen.•Tint: Adjust the colors from a green to magenta tint to view the natural skin tones of people on the screen. •Sharpness: Adjust how sharp or soft edges of images appear.•Noise Reduction: Improve how clear the picture appears by reducing noise. •Adaptive Contrast: Automatically darken dark areas and lighten light areas of images to see more details.•Color Temperature: Select a preset color temperature.•White Balance: Adjust the intensity of red, green and blue lights to view the true colors of all images in the picture.•Color Tuner: Adjust the Hue, Saturation and Brightness of color settings. Restore Defaults : Restore all the picture settings in the current picture mode to the factory default values.SettingsPictureSoundChannelNetworkSystemAbout TVPicture ModeStandardBrightness50Contrast50Color50Aspect RatioAutoBacklightAdvanced Picture SettingsRestore Defaults
15 Basic and Advanced TV SettingsSound Menu Sound Mode: Select a preset sound mode to suit the type of content you are listening to: Standard, Theater, Music , Speech and Late Night.Set the sound effects to suit your preference: Configure your audio settings for your sound preferences. Once you choose the mode, you can adjust the audio based on the following settings: TM Audio Enhancements: dbx-tv’s Total Technology delivers the best possible TV sound for your TV.• Total Sonics: Optimizes overall sound quality by increasing bass, making dialog clear and natural, and widening the sound field. • Total Surround: Provides surround sound experience with psycho-acoustic processing to place sounds beside, behind, and above the viewer. For best results use with Total Sonics. • Total Volume: Maintains consistent loudness levels from wide dynamic range programs, too-loud commercials, and channel or input changes. Advanced Audio Settings: Tune the audio settings and quality of the TV.•Equalizer: Boost the volume at different frequencies.•Lip Sync: Synchronize the displayed image with the audio output.•Balance: Adjust the left and right speaker strength to optimize audio for a specific location.•Digital Audio Out: Select the digital audio output format that best suits the audio device type. For example, choose RAW (which is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set up. Choose PCM if you have an amplifier that does not support Dolby Digital technology.•Digital Audio Delay: Adjust the digital audio output delay time to sync sound from an external speaker with the images on the TV.•TV Speaker & ARC: Select the TV speaker or an external speaker for sound output.•Audio Out: Change the way audio is sent through the type of device that’s connected to your TV Audio Out port. Restore Defaults : Restore all of the audio settings in current audio mode to the factory default values.Channel Menu Tuner Mode: Select Tuner Mode if you receive TV channels over the air (antenna) or directly through a cable connection without using a set top box. The input will be used during a channel scan. Auto Channel Scan: Automatically scan for channels to view programming from your TV source. Channel Skip: Skip a channel that your TV picked up during a previous channel scan search. Favorites List: Quickly access your most-watched channels by creating a Favorites list.Network Menu Network Configuration: Set up the network to gain full access of Smart TV features.• Connection Type: Ethernet Choose a wired network connection to access the Internet.• Ethernet: Display the network connection status.• IP Setting Mode: Configure the IP setting for your network connection.SettingsPictureSoundChannelNetworkSystemAbout TVSound ModeStandardAudio EnhancementsAdvanced Audio SettingsRestore DefaultsSettingsPictureSoundChannelNetworkSystemAbout TVTuner ModeAntennaAuto Channel ScanChannel SkipFavorites ListSettingsPictureSoundChannelNetworkSystemAbout TVNetworkCongurationNetwork InformationDisconnectedAnyview StreamOnTV NameSmart TV
16 Network Information: View information about your network connection. Anyview Stream: Share video, music or other content from another device on to your TV screen. TV Name: Choose a name for your TV. The name will be shown to devices that are available for sharing data.System Menu Location: Choose the location from where you will watch your TV. Time: Set the current time based on your location.• Time Zone: Select your time zone.• Time Format: Set the time to display in a 12 or 24-hour format.• Daylight Savings: Select whether to apply Daylight Savings Time to the TV.• Date/Time: Set the Date and Time.• Power On Timer: Enable the Power On Timer to Off, Once or Daily.• Power Off Timer: Enable the Sleep Timer to Off, Once or Daily.• Sleep Timer: Set the sleep timer to automatically turn the TV Off within a specified time: Off, 10 Minutes, 20 Minutes, 30 Minutes, 40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes and 120 Minutes. Language: Adjust the default language settings for the TV. Parental Controls: Turn On Parental Controls to block children from being able to view certain programs. The default password is 0000.• Locks: Enable or disables all locks. All selected locks can be turned off for parental viewing and easily turned on again.• Block Time: Block certain channels and programs during certain periods of time.• Channel Block: Block programs by channels when you turn On the Parental Controls feature.• Program Block: Blocks programs according to their TV or MPAA (movie) rating when you have turned on the Parental Controls feature and selected that rating to be blocked.•Input Block : Block content from devices that are connected to certain TV ports.• Change PIN: Change your PIN that you use to access Parental Controls. If you want to change your parental control password, first enter the new password then enter the same password again.NOTEIf you forget your password, call the Hisense Consumer Electronics Care Center or reset your TV back to the factory settings.• Restore Parental Control Defaults: Restore Parental Control back to the factory default setting. Application Settings: Set settings for apps on your TV.• Netflix : Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed for you service.• ESN : Display the Netflix Electronic Serial Number.• VUDU : Remove this TV from your VUDU account. Please contact VUDU if you Basic and Advanced TV Settings• Connection Type: Wireless Choose a wireless network connection to access the Internet.• Advanced Settings: Configure the advanced wireless network settings for the TV. • Available Networks: Select an available network to connect. And you can also add wireless network or refresh wireless network.• Connection Type: Off Turn off the Internet connection.SettingsPictureSoundChannelNetworkSystemAbout TVLocationUSATimeLanguageClosed CaptionParental ControlsHDMI Function Application SettingsAdvanced Settings
17captioning that covers half or all of the screen. Text1-Text4 display content are provided by the broadcaster.Off: To turn off the Analog Caption.• Digital Caption: Select a Digital Caption setting: Off,CS1-CS6.• Digital CC Settings: There are two caption styles. One is the automatic function set as the broadcaster, while the other is the custom style where you can adjust the Style, Size, Font, Text Color, Text Opacity, Background Color etc. HDMI Function : Configure how to control CEC-enabled devices with your TV remote.• CEC & MHL Control: Allow HDMI devices to control each other. • Device Auto Power Off: Allow CEC-enabled devices to turn Off with the TV.• TV Auto Power On: Allow the TV to turn On with CEC-enabled devices.• Device Connect: Allow CEC-enabled devices to communicate with each other when connected through an HDMI cable.• CEC Device Lists: View a list of all CEC-enabled devices.NOTEHDMI cables must be used to connect HDMI CEC-compatible devices to your TV.The HDMI CEC feature of the connected device must be turned on.If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features do not work.Depending on the connected HDMI device, the HDMI-CEC Control feature may notwork. Advanced Settings: Access the Advanced Settings menu.• Menu Timeout : Set the amount of time that you’d like for the menu to display : 10s, 20s , 30s , 60s or Off.• Use Mode: Set the TV to use in Home, Store Mode, or Store Mode with 4K Video.• Input Labels: Edit the input labels.• Default LiveTV Source: Select the default input selected by the remote control Live TV button.• SetupWizard: Use the Setup Wizard for instructions to help you set up your TV.• Power Indicator: Set the Power Indicator light to stay On or Off when watching TV.About TV Menu About TV• SystemInformation: View system information.• HisenseLegalDisclaimer: Read the Hisense Legal Disclaimer.• AutoFirmwareUpgrade: Set your TV to automatically receive the latest firmware.• CheckFirmwareUpgrade: Check to ensure that your TV has received the latest firmware.• RestoreToFactoryDefault: Restore your TV back to the factory default. Basic and Advanced TV Settingswant to stop being billed for you service. Closed Caption: Adjust Closed Captioning settings.• Analog Caption: Select an Analog Caption setting from Off, CC1-CC4, Text 1-TEXT4.CC1-CC4: Closed captioning appears in a small banner across the bottom of the screen. CC1 is usually the “printed” version of the audio. CC2-CC4 display content are provided by the broadcaster.Text1-Text4: Closed SettingsPictureSoundChannelNetworkSystemAbout TVSystem InformationHisense Legal DisclaimerAuto Firmware UpgradeOnCheck Firmware UpgradeRestore To Factory Default

Navigation menu